diff options
Diffstat (limited to 'dts/Bindings/iio/pressure')
| -rw-r--r-- | dts/Bindings/iio/pressure/asc,dlhl60d.yaml | 6 | ||||
| -rw-r--r-- | dts/Bindings/iio/pressure/bmp085.yaml | 30 | ||||
| -rw-r--r-- | dts/Bindings/iio/pressure/honeywell,hsc030pa.yaml | 142 | ||||
| -rw-r--r-- | dts/Bindings/iio/pressure/honeywell,mprls0025pa.yaml | 102 | ||||
| -rw-r--r-- | dts/Bindings/iio/pressure/hoperf,hp03.yaml | 47 | ||||
| -rw-r--r-- | dts/Bindings/iio/pressure/hp03.txt | 17 | ||||
| -rw-r--r-- | dts/Bindings/iio/pressure/meas,ms5611.yaml | 61 | ||||
| -rw-r--r-- | dts/Bindings/iio/pressure/ms5611.txt | 19 | ||||
| -rw-r--r-- | dts/Bindings/iio/pressure/ms5637.txt | 17 | ||||
| -rw-r--r-- | dts/Bindings/iio/pressure/murata,zpa2326.yaml | 65 | ||||
| -rw-r--r-- | dts/Bindings/iio/pressure/rohm,bm1390.yaml | 52 | ||||
| -rw-r--r-- | dts/Bindings/iio/pressure/zpa2326.txt | 29 |
12 files changed, 489 insertions, 98 deletions
diff --git a/dts/Bindings/iio/pressure/asc,dlhl60d.yaml b/dts/Bindings/iio/pressure/asc,dlhl60d.yaml index 64c18f1693..9fb8d773ef 100644 --- a/dts/Bindings/iio/pressure/asc,dlhl60d.yaml +++ b/dts/Bindings/iio/pressure/asc,dlhl60d.yaml @@ -7,13 +7,13 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: All Sensors DLH series low voltage digital pressure sensors maintainers: - - Tomislav Denis <tomislav.denis@avl.com> + - Jonathan Cameron <jic23@kernel.org> description: | Bindings for the All Sensors DLH series pressure sensors. Specifications about the sensors can be found at: - http://www.allsensors.com/cad/DS-0355_Rev_B.PDF + https://www.allsensors.com/cad/DS-0355_Rev_B.PDF properties: compatible: @@ -39,7 +39,7 @@ examples: - | #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/Bindings/iio/pressure/bmp085.yaml b/dts/Bindings/iio/pressure/bmp085.yaml index 49257f9251..6fda887ee9 100644 --- a/dts/Bindings/iio/pressure/bmp085.yaml +++ b/dts/Bindings/iio/pressure/bmp085.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/iio/pressure/bmp085.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: BMP085/BMP180/BMP280/BME280 pressure iio sensors +title: BMP085/BMP180/BMP280/BME280/BMP380 pressure iio sensors maintainers: - Andreas Klinger <ak@it-klinger.de> @@ -16,6 +16,8 @@ description: | https://www.bosch-sensortec.com/bst/products/all_products/bmp180 https://www.bosch-sensortec.com/bst/products/all_products/bmp280 https://www.bosch-sensortec.com/bst/products/all_products/bme280 + https://www.bosch-sensortec.com/bst/products/all_products/bmp380 + https://www.bosch-sensortec.com/bst/products/all_products/bmp580 properties: compatible: @@ -24,6 +26,8 @@ properties: - bosch,bmp180 - bosch,bmp280 - bosch,bme280 + - bosch,bmp380 + - bosch,bmp580 reg: maxItems: 1 @@ -58,16 +62,16 @@ examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { - #address-cells = <1>; - #size-cells = <0>; - pressure@77 { - compatible = "bosch,bmp085"; - reg = <0x77>; - interrupt-parent = <&gpio0>; - interrupts = <25 IRQ_TYPE_EDGE_RISING>; - reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; - vddd-supply = <&foo>; - vdda-supply = <&bar>; - }; + i2c { + #address-cells = <1>; + #size-cells = <0>; + pressure@77 { + compatible = "bosch,bmp085"; + reg = <0x77>; + interrupt-parent = <&gpio0>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; + vddd-supply = <&foo>; + vdda-supply = <&bar>; + }; }; diff --git a/dts/Bindings/iio/pressure/honeywell,hsc030pa.yaml b/dts/Bindings/iio/pressure/honeywell,hsc030pa.yaml new file mode 100644 index 0000000000..65a24ed67b --- /dev/null +++ b/dts/Bindings/iio/pressure/honeywell,hsc030pa.yaml @@ -0,0 +1,142 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/honeywell,hsc030pa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Honeywell TruStability HSC and SSC pressure sensor series + +description: | + support for Honeywell TruStability HSC and SSC digital pressure sensor + series. + + These sensors have either an I2C, an SPI or an analog interface. Only the + digital versions are supported by this driver. + + There are 118 models with different pressure ranges available in each family. + The vendor calls them "HSC series" and "SSC series". All of them have an + identical programming model but differ in pressure range, unit and transfer + function. + + To support different models one needs to specify the pressure range as well + as the transfer function. Pressure range can either be provided via + pressure-triplet (directly extracted from the part number) or in case it's + a custom chip via numerical range limits converted to pascals. + + The transfer function defines the ranges of raw conversion values delivered + by the sensor. pmin-pascal and pmax-pascal corespond to the minimum and + maximum pressure that can be measured. + + Please note that in case of an SPI-based sensor, the clock signal should not + exceed 800kHz and the MOSI signal is not required. + + Specifications about the devices can be found at: + https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-hsc-series/documents/sps-siot-trustability-hsc-series-high-accuracy-board-mount-pressure-sensors-50099148-a-en-ciid-151133.pdf + https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-ssc-series/documents/sps-siot-trustability-ssc-series-standard-accuracy-board-mount-pressure-sensors-50099533-a-en-ciid-151134.pdf + +maintainers: + - Petre Rodan <petre.rodan@subdimension.ro> + +properties: + compatible: + const: honeywell,hsc030pa + + reg: + maxItems: 1 + + honeywell,transfer-function: + description: | + Transfer function which defines the range of valid values delivered by + the sensor. + 0 - A, 10% to 90% of 2^14 + 1 - B, 5% to 95% of 2^14 + 2 - C, 5% to 85% of 2^14 + 3 - F, 4% to 94% of 2^14 + enum: [0, 1, 2, 3] + $ref: /schemas/types.yaml#/definitions/uint32 + + honeywell,pressure-triplet: + description: | + Case-sensitive five character string that defines pressure range, unit + and type as part of the device nomenclature. In the unlikely case of a + custom chip, set to "NA" and provide pmin-pascal and pmax-pascal. + enum: [001BA, 1.6BA, 2.5BA, 004BA, 006BA, 010BA, 1.6MD, 2.5MD, 004MD, + 006MD, 010MD, 016MD, 025MD, 040MD, 060MD, 100MD, 160MD, 250MD, + 400MD, 600MD, 001BD, 1.6BD, 2.5BD, 004BD, 2.5MG, 004MG, 006MG, + 010MG, 016MG, 025MG, 040MG, 060MG, 100MG, 160MG, 250MG, 400MG, + 600MG, 001BG, 1.6BG, 2.5BG, 004BG, 006BG, 010BG, 100KA, 160KA, + 250KA, 400KA, 600KA, 001GA, 160LD, 250LD, 400LD, 600LD, 001KD, + 1.6KD, 2.5KD, 004KD, 006KD, 010KD, 016KD, 025KD, 040KD, 060KD, + 100KD, 160KD, 250KD, 400KD, 250LG, 400LG, 600LG, 001KG, 1.6KG, + 2.5KG, 004KG, 006KG, 010KG, 016KG, 025KG, 040KG, 060KG, 100KG, + 160KG, 250KG, 400KG, 600KG, 001GG, 015PA, 030PA, 060PA, 100PA, + 150PA, 0.5ND, 001ND, 002ND, 004ND, 005ND, 010ND, 020ND, 030ND, + 001PD, 005PD, 015PD, 030PD, 060PD, 001NG, 002NG, 004NG, 005NG, + 010NG, 020NG, 030NG, 001PG, 005PG, 015PG, 030PG, 060PG, 100PG, + 150PG, NA] + $ref: /schemas/types.yaml#/definitions/string + + honeywell,pmin-pascal: + description: | + Minimum pressure value the sensor can measure in pascal. + To be specified only if honeywell,pressure-triplet is set to "NA". + + honeywell,pmax-pascal: + description: | + Maximum pressure value the sensor can measure in pascal. + To be specified only if honeywell,pressure-triplet is set to "NA". + + vdd-supply: + description: + Provide VDD power to the sensor (either 3.3V or 5V depending on the chip) + + spi-max-frequency: + maximum: 800000 + +required: + - compatible + - reg + - honeywell,transfer-function + - honeywell,pressure-triplet + +additionalProperties: false + +dependentSchemas: + honeywell,pmin-pascal: + properties: + honeywell,pressure-triplet: + const: NA + honeywell,pmax-pascal: + properties: + honeywell,pressure-triplet: + const: NA + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pressure@28 { + compatible = "honeywell,hsc030pa"; + reg = <0x28>; + honeywell,transfer-function = <0>; + honeywell,pressure-triplet = "030PA"; + }; + }; + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + pressure@0 { + compatible = "honeywell,hsc030pa"; + reg = <0>; + spi-max-frequency = <800000>; + honeywell,transfer-function = <0>; + honeywell,pressure-triplet = "NA"; + honeywell,pmin-pascal = <0>; + honeywell,pmax-pascal = <200000>; + }; + }; +... diff --git a/dts/Bindings/iio/pressure/honeywell,mprls0025pa.yaml b/dts/Bindings/iio/pressure/honeywell,mprls0025pa.yaml new file mode 100644 index 0000000000..d9e903fbfd --- /dev/null +++ b/dts/Bindings/iio/pressure/honeywell,mprls0025pa.yaml @@ -0,0 +1,102 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/honeywell,mprls0025pa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Honeywell mprls0025pa pressure sensor + +maintainers: + - Andreas Klinger <ak@it-klinger.de> + +description: | + Honeywell pressure sensor of model mprls0025pa. + + This sensor has an I2C and SPI interface. Only the I2C interface is + implemented. + + There are many models with different pressure ranges available. The vendor + calls them "mpr series". All of them have the identical programming model and + differ in the pressure range, unit and transfer function. + + To support different models one need to specify the pressure range as well as + the transfer function. Pressure range needs to be converted from its unit to + pascal. + + The transfer function defines the ranges of numerical values delivered by the + sensor. The minimal range value stands for the minimum pressure and the + maximum value also for the maximum pressure with linear relation inside the + range. + + Specifications about the devices can be found at: + https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/ + products/sensors/pressure-sensors/board-mount-pressure-sensors/ + micropressure-mpr-series/documents/ + sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf + +properties: + compatible: + const: honeywell,mprls0025pa + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + reset-gpios: + description: + Optional GPIO for resetting the device. + If not present the device is not reset during the probe. + maxItems: 1 + + honeywell,pmin-pascal: + description: + Minimum pressure value the sensor can measure in pascal. + + honeywell,pmax-pascal: + description: + Maximum pressure value the sensor can measure in pascal. + + honeywell,transfer-function: + description: | + Transfer function which defines the range of valid values delivered by the + sensor. + 1 - A, 10% to 90% of 2^24 (1677722 .. 15099494) + 2 - B, 2.5% to 22.5% of 2^24 (419430 .. 3774874) + 3 - C, 20% to 80% of 2^24 (3355443 .. 13421773) + $ref: /schemas/types.yaml#/definitions/uint32 + + vdd-supply: + description: provide VDD power to the sensor. + +required: + - compatible + - reg + - honeywell,pmin-pascal + - honeywell,pmax-pascal + - honeywell,transfer-function + - vdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pressure@18 { + compatible = "honeywell,mprls0025pa"; + reg = <0x18>; + reset-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio3>; + interrupts = <21 IRQ_TYPE_EDGE_FALLING>; + honeywell,pmin-pascal = <0>; + honeywell,pmax-pascal = <172369>; + honeywell,transfer-function = <1>; + vdd-supply = <&vcc_3v3>; + }; + }; diff --git a/dts/Bindings/iio/pressure/hoperf,hp03.yaml b/dts/Bindings/iio/pressure/hoperf,hp03.yaml new file mode 100644 index 0000000000..69a3759e23 --- /dev/null +++ b/dts/Bindings/iio/pressure/hoperf,hp03.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/hoperf,hp03.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HopeRF HP03 digital pressure/temperature sensors + +maintainers: + - Marek Vasut <marex@denx.de> + +description: | + Digital pressure and temperature sensor with an I2C interface. + +properties: + compatible: + const: hoperf,hp03 + + reg: + maxItems: 1 + + xclr-gpios: + description: + The XCLR pin is a reset of the ADC in the chip, it must be pulled + HI before the conversion and readout of the value from the ADC + registers and pulled LO afterward. + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pressure@77 { + compatible = "hoperf,hp03"; + reg = <0x77>; + xclr-gpios = <&portc 0 0x0>; + }; + }; +... diff --git a/dts/Bindings/iio/pressure/hp03.txt b/dts/Bindings/iio/pressure/hp03.txt deleted file mode 100644 index 831dbee7a5..0000000000 --- a/dts/Bindings/iio/pressure/hp03.txt +++ /dev/null @@ -1,17 +0,0 @@ -HopeRF HP03 digital pressure/temperature sensors - -Required properties: -- compatible: must be "hoperf,hp03" -- xclr-gpio: must be device tree identifier of the XCLR pin. - The XCLR pin is a reset of the ADC in the chip, - it must be pulled HI before the conversion and - readout of the value from the ADC registers and - pulled LO afterward. - -Example: - -hp03@77 { - compatible = "hoperf,hp03"; - reg = <0x77>; - xclr-gpio = <&portc 0 0x0>; -}; diff --git a/dts/Bindings/iio/pressure/meas,ms5611.yaml b/dts/Bindings/iio/pressure/meas,ms5611.yaml new file mode 100644 index 0000000000..21e6ddb7f4 --- /dev/null +++ b/dts/Bindings/iio/pressure/meas,ms5611.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/meas,ms5611.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Measurement Specialities ms5611 and similar pressure sensors + +maintainers: + - Tomasz Duszynski <tduszyns@gmail.com> + +description: | + Pressure sensors from MEAS Switzerland with SPI and I2C bus interfaces. + +properties: + compatible: + enum: + - meas,ms5607 + - meas,ms5611 + + reg: + maxItems: 1 + + vdd-supply: true + + spi-max-frequency: + maximum: 20000000 + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pressure@77 { + compatible = "meas,ms5607"; + reg = <0x77>; + vdd-supply = <&ldo_3v3_gnss>; + }; + }; + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + pressure@0 { + compatible = "meas,ms5611"; + reg = <0>; + vdd-supply = <&ldo_3v3_gnss>; + spi-max-frequency = <20000000>; + }; + }; +... diff --git a/dts/Bindings/iio/pressure/ms5611.txt b/dts/Bindings/iio/pressure/ms5611.txt deleted file mode 100644 index 17bca866c0..0000000000 --- a/dts/Bindings/iio/pressure/ms5611.txt +++ /dev/null @@ -1,19 +0,0 @@ -MEAS ms5611 family pressure sensors - -Pressure sensors from MEAS Switzerland with SPI and I2C bus interfaces. - -Required properties: -- compatible: "meas,ms5611" or "meas,ms5607" -- reg: the I2C address or SPI chip select the device will respond to - -Optional properties: -- vdd-supply: an optional regulator that needs to be on to provide VDD - power to the sensor. - -Example: - -ms5607@77 { - compatible = "meas,ms5607"; - reg = <0x77>; - vdd-supply = <&ldo_3v3_gnss>; -}; diff --git a/dts/Bindings/iio/pressure/ms5637.txt b/dts/Bindings/iio/pressure/ms5637.txt deleted file mode 100644 index 1f43ffa068..0000000000 --- a/dts/Bindings/iio/pressure/ms5637.txt +++ /dev/null @@ -1,17 +0,0 @@ -* MS5637 - Measurement-Specialties MS5637, MS5805, MS5837 and MS8607 pressure & temperature sensor - -Required properties: - - -compatible: should be one of the following - meas,ms5637 - meas,ms5805 - meas,ms5837 - meas,ms8607-temppressure - -reg: I2C address of the sensor - -Example: - -ms5637@76 { - compatible = "meas,ms5637"; - reg = <0x76>; -}; diff --git a/dts/Bindings/iio/pressure/murata,zpa2326.yaml b/dts/Bindings/iio/pressure/murata,zpa2326.yaml new file mode 100644 index 0000000000..c33640ddde --- /dev/null +++ b/dts/Bindings/iio/pressure/murata,zpa2326.yaml @@ -0,0 +1,65 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/murata,zpa2326.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Murata ZPA2326 pressure sensor + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + +description: | + Pressure sensor from Murata with SPI and I2C bus interfaces. + + +properties: + compatible: + const: murata,zpa2326 + + reg: + maxItems: 1 + + vdd-supply: true + vref-supply: true + + interrupts: + maxItems: 1 + + spi-max-frequency: + maximum: 1000000 + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pressure@5c { + compatible = "murata,zpa2326"; + reg = <0x5c>; + interrupt-parent = <&gpio>; + interrupts = <12>; + vdd-supply = <&ldo_1v8_gnss>; + }; + }; + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + pressure@0 { + compatible = "murata,zpa2326"; + reg = <0>; + spi-max-frequency = <500000>; + }; + }; +... diff --git a/dts/Bindings/iio/pressure/rohm,bm1390.yaml b/dts/Bindings/iio/pressure/rohm,bm1390.yaml new file mode 100644 index 0000000000..7c4ca6322b --- /dev/null +++ b/dts/Bindings/iio/pressure/rohm,bm1390.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/rohm,bm1390.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BM1390 pressure sensor + +maintainers: + - Matti Vaittinen <mazziesaccount@gmail.com> + +description: + BM1390GLV-Z is a pressure sensor which performs internal temperature + compensation for the MEMS. Pressure range is from 300 hPa to 1300 hPa + and sample averaging and IIR filtering is built in. Temperature + measurement is also supported. + +properties: + compatible: + const: rohm,bm1390glv-z + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + - vdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + pressure-sensor@5d { + compatible = "rohm,bm1390glv-z"; + reg = <0x5d>; + + interrupt-parent = <&gpio1>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + + vdd-supply = <&vdd>; + }; + }; diff --git a/dts/Bindings/iio/pressure/zpa2326.txt b/dts/Bindings/iio/pressure/zpa2326.txt deleted file mode 100644 index a36ab3e0c3..0000000000 --- a/dts/Bindings/iio/pressure/zpa2326.txt +++ /dev/null @@ -1,29 +0,0 @@ -Murata ZPA2326 pressure sensor - -Pressure sensor from Murata with SPI and I2C bus interfaces. - -Required properties: -- compatible: "murata,zpa2326" -- reg: the I2C address or SPI chip select the device will respond to - -Recommended properties for SPI bus usage: -- spi-max-frequency: maximum SPI bus frequency as documented in - Documentation/devicetree/bindings/spi/spi-bus.txt - -Optional properties: -- vref-supply: an optional regulator that needs to be on to provide VREF - power to the sensor -- vdd-supply: an optional regulator that needs to be on to provide VDD - power to the sensor -- interrupts: interrupt mapping for IRQ as documented in - Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - -Example: - -zpa2326@5c { - compatible = "murata,zpa2326"; - reg = <0x5c>; - interrupt-parent = <&gpio>; - interrupts = <12>; - vdd-supply = <&ldo_1v8_gnss>; -}; |