diff options
Diffstat (limited to 'dts/Bindings/iio/pressure')
| -rw-r--r-- | dts/Bindings/iio/pressure/bmp085.txt | 8 | ||||
| -rw-r--r-- | dts/Bindings/iio/pressure/zpa2326.txt | 2 |
2 files changed, 0 insertions, 10 deletions
diff --git a/dts/Bindings/iio/pressure/bmp085.txt b/dts/Bindings/iio/pressure/bmp085.txt index c7198a03c9..61c72e63c5 100644 --- a/dts/Bindings/iio/pressure/bmp085.txt +++ b/dts/Bindings/iio/pressure/bmp085.txt @@ -8,11 +8,6 @@ Required properties: "bosch,bme280" Optional properties: -- chip-id: configurable chip id for non-default chip revisions -- temp-measurement-period: temperature measurement period (milliseconds) -- default-oversampling: default oversampling value to be used at startup, - value range is 0-3 with rising sensitivity. -- interrupt-parent: should be the phandle for the interrupt controller - interrupts: interrupt mapping for IRQ - reset-gpios: a GPIO line handling reset of the sensor: as the line is active low, it should be marked GPIO_ACTIVE_LOW (see gpio/gpio.txt) @@ -24,9 +19,6 @@ Example: pressure@77 { compatible = "bosch,bmp085"; reg = <0x77>; - chip-id = <10>; - temp-measurement-period = <100>; - default-oversampling = <2>; interrupt-parent = <&gpio0>; interrupts = <25 IRQ_TYPE_EDGE_RISING>; reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; diff --git a/dts/Bindings/iio/pressure/zpa2326.txt b/dts/Bindings/iio/pressure/zpa2326.txt index fb85de676e..a36ab3e0c3 100644 --- a/dts/Bindings/iio/pressure/zpa2326.txt +++ b/dts/Bindings/iio/pressure/zpa2326.txt @@ -15,8 +15,6 @@ Optional properties: power to the sensor - vdd-supply: an optional regulator that needs to be on to provide VDD power to the sensor -- interrupt-parent: phandle to the parent interrupt controller as documented in - Documentation/devicetree/bindings/interrupt-controller/interrupts.txt - interrupts: interrupt mapping for IRQ as documented in Documentation/devicetree/bindings/interrupt-controller/interrupts.txt |