diff options
Diffstat (limited to 'dts/Bindings/iio/temperature/adi,ltc2983.yaml')
| -rw-r--r-- | dts/Bindings/iio/temperature/adi,ltc2983.yaml | 582 |
1 files changed, 329 insertions, 253 deletions
diff --git a/dts/Bindings/iio/temperature/adi,ltc2983.yaml b/dts/Bindings/iio/temperature/adi,ltc2983.yaml index 8fb46de664..dbb85135fd 100644 --- a/dts/Bindings/iio/temperature/adi,ltc2983.yaml +++ b/dts/Bindings/iio/temperature/adi,ltc2983.yaml @@ -4,19 +4,52 @@ $id: http://devicetree.org/schemas/iio/temperature/adi,ltc2983.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Analog Devices LTC2983 Multi-sensor Temperature system +title: Analog Devices LTC2983, LTC2986, LTM2985 Multi-sensor Temperature system maintainers: - Nuno Sá <nuno.sa@analog.com> description: | - Analog Devices LTC2983 Multi-Sensor Digital Temperature Measurement System + Analog Devices LTC2983, LTC2984, LTC2986, LTM2985 Multi-Sensor Digital + Temperature Measurement Systems + https://www.analog.com/media/en/technical-documentation/data-sheets/2983fc.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/2984fb.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/29861fa.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ltm2985.pdf + +$defs: + sensor-node: + type: object + description: Sensor node common constraints + + properties: + reg: + description: + Channel number. Connects the sensor to the channel with this number + of the device. + minimum: 1 + maximum: 20 + + adi,sensor-type: + description: Type of sensor connected to the device. + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - reg + - adi,sensor-type + properties: compatible: - enum: - - adi,ltc2983 + oneOf: + - enum: + - adi,ltc2983 + - adi,ltc2986 + - adi,ltm2985 + - items: + - const: adi,ltc2984 + - const: adi,ltc2983 reg: maxItems: 1 @@ -25,27 +58,26 @@ properties: maxItems: 1 adi,mux-delay-config-us: - description: - The LTC2983 performs 2 or 3 internal conversion cycles per temperature - result. Each conversion cycle is performed with different excitation and - input multiplexer configurations. Prior to each conversion, these - excitation circuits and input switch configurations are changed and an - internal 1ms delay ensures settling prior to the conversion cycle in most - cases. An extra delay can be configured using this property. The value is - rounded to nearest 100us. + description: | + Extra delay prior to each conversion, in addition to the internal 1ms + delay, for the multiplexer to switch input configurations and + excitation values. + + This property is supposed to be in microseconds, but to maintain + compatibility, this value will be multiplied by 100 before usage. maximum: 255 + default: 0 adi,filter-notch-freq: description: - Set's the default setting of the digital filter. The default is - simultaneous 50/60Hz rejection. + Notch frequency of the digital filter. 0 - 50/60Hz rejection 1 - 60Hz rejection 2 - 50Hz rejection - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 2 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 2 + default: 0 '#address-cells': const: 1 @@ -54,30 +86,11 @@ properties: const: 0 patternProperties: - "@([1-9]|1[0-9]|20)$": - type: object - - properties: - reg: - description: - The channel number. It can be connected to one of the 20 channels of - the device. - minimum: 1 - maximum: 20 - - adi,sensor-type: - description: Identifies the type of sensor connected to the device. - $ref: /schemas/types.yaml#/definitions/uint32 - - required: - - reg - - adi,sensor-type - "^thermocouple@": - type: object - description: - Represents a thermocouple sensor which is connected to one of the device - channels. + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false + + description: Thermocouple sensor. properties: adi,sensor-type: @@ -91,94 +104,95 @@ patternProperties: 7 - Type T Thermocouple 8 - Type B Thermocouple 9 - Custom Thermocouple - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 1 maximum: 9 adi,single-ended: - description: - Boolean property which set's the thermocouple as single-ended. + description: Whether the sensor is single-ended. type: boolean adi,sensor-oc-current-microamp: - description: - This property set's the pulsed current value applied during - open-circuit detect. + description: Pulsed current value applied during open-circuit detect. enum: [10, 100, 500, 1000] + default: 10 adi,cold-junction-handle: description: - Phandle which points to a sensor object responsible for measuring - the thermocouple cold junction temperature. - $ref: "/schemas/types.yaml#/definitions/phandle" + Sensor responsible for measuring the thermocouple cold junction + temperature. + $ref: /schemas/types.yaml#/definitions/phandle adi,custom-thermocouple: description: - This is a table, where each entry should be a pair of - voltage(mv)-temperature(K). The entries must be given in nv and uK - so that, the original values must be multiplied by 1000000. For - more details look at table 69 and 70. - Note should be signed, but dtc doesn't currently maintain the - sign. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint64-matrix + Used for digitizing custom thermocouples. + See Page 59 of the datasheet. + $ref: /schemas/types.yaml#/definitions/int64-matrix minItems: 3 maxItems: 64 items: - minItems: 2 - maxItems: 2 + items: + - description: Voltage point in nV, signed. + - description: Temperature point in uK. + + allOf: + - if: + properties: + adi,sensor-type: + const: 9 + then: + required: + - adi,custom-thermocouple "^diode@": - type: object - description: - Represents a diode sensor which is connected to one of the device - channels. + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false + + description: Diode sensor. properties: adi,sensor-type: - description: Identifies the sensor as a diode. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + description: Sensor type for diodes. + $ref: /schemas/types.yaml#/definitions/uint32 const: 28 adi,single-ended: - description: Boolean property which set's the diode as single-ended. + description: Whether the sensor is single-ended. type: boolean adi,three-conversion-cycles: description: - Boolean property which set's three conversion cycles removing - parasitic resistance effects between the LTC2983 and the diode. + Whether to use three conversion cycles to remove parasitic + resistance between the device and the diode. type: boolean adi,average-on: description: - Boolean property which enables a running average of the diode - temperature reading. This reduces the noise when the diode is used - as a cold junction temperature element on an isothermal block - where temperatures change slowly. + Whether to use a running average of the diode temperature + reading to reduce the noise when the diode is used as a cold + junction temperature element on an isothermal block where + temperatures change slowly. type: boolean adi,excitation-current-microamp: description: - This property controls the magnitude of the excitation current - applied to the diode. Depending on the number of conversions - cycles, this property will assume different predefined values on - each cycle. Just set the value of the first cycle (1l). + Magnitude of the 1l excitation current applied to the diode. + 4l excitation current will be 4 times this value, and 8l + excitation current will be 8 times value. enum: [10, 20, 40, 80] + default: 10 adi,ideal-factor-value: description: - This property sets the diode ideality factor. The real value must - be multiplied by 1000000 to remove the fractional part. For more - information look at table 20 of the datasheet. + Diode ideality factor. + Set this property to 1000000 times the real value. $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 "^rtd@": - type: object - description: - Represents a rtd sensor which is connected to one of the device channels. + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false + description: RTD sensor. properties: reg: @@ -196,77 +210,88 @@ patternProperties: 16 - RTD PT-1000 (0.00375) 17 - RTD NI-120 18 - RTD Custom - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 10 maximum: 18 adi,rsense-handle: - description: - Phandle pointing to a rsense object associated with this RTD. - $ref: "/schemas/types.yaml#/definitions/phandle" + description: Associated sense resistor sensor. + $ref: /schemas/types.yaml#/definitions/phandle adi,number-of-wires: description: - Identifies the number of wires used by the RTD. Setting this - property to 5 means 4 wires with Kelvin Rsense. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [2, 3, 4, 5] + Number of wires used by the RTD. + 5 means 4 wires with Kelvin sense resistor. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2, 3, 4, 5] + default: 2 adi,rsense-share: description: - Boolean property which enables Rsense sharing, where one sense - resistor is used for multiple 2-, 3-, and/or 4-wire RTDs. - type: boolean - - adi,current-rotate: - description: - Boolean property which enables excitation current rotation to - automatically remove parasitic thermocouple effects. Note that - this property is not allowed for 2- and 3-wire RTDs. + Whether to enable sense resistor sharing, where one sense + resistor is used by multiple sensors. type: boolean adi,excitation-current-microamp: - description: - This property controls the magnitude of the excitation current - applied to the RTD. + description: Excitation current applied to the RTD. enum: [5, 10, 25, 50, 100, 250, 500, 1000] + default: 5 adi,rtd-curve: - description: - This property set the RTD curve used and the corresponding - Callendar-VanDusen constants. Look at table 30 of the datasheet. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 3 + description: | + RTD curve and the corresponding Callendar-VanDusen constants. + 0 - European + 1 - American + 2 - Japanese + 3 - ITS-90 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 0 adi,custom-rtd: description: - This is a table, where each entry should be a pair of - resistance(ohm)-temperature(K). The entries added here are in uohm - and uK. For more details values look at table 74 and 75. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint64-matrix + Used for digitizing custom RTDs. + See Page 62 of the datasheet. + $ref: /schemas/types.yaml#/definitions/uint64-matrix + minItems: 3 + maxItems: 64 items: - minItems: 3 - maxItems: 64 items: - minItems: 2 - maxItems: 2 + - description: Resistance point in uOhms. + - description: Temperature point in uK. required: - adi,rsense-handle - dependencies: - adi,current-rotate: [ adi,rsense-share ] + allOf: + - if: + properties: + adi,number-of-wires: + const: 4 + then: + properties: + adi,current-rotate: + description: + Whether to enable excitation current rotation to automatically + remove parasitic thermocouple effects. + type: boolean + + dependencies: + adi,current-rotate: [ "adi,rsense-share" ] + + - if: + properties: + adi,sensor-type: + const: 18 + then: + required: + - adi,custom-rtd "^thermistor@": - type: object - description: - Represents a thermistor sensor which is connected to one of the device - channels. + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false + description: Thermistor sensor. properties: adi,sensor-type: @@ -280,97 +305,140 @@ patternProperties: 25 - Thermistor Spectrum 1003k 1kohm 26 - Thermistor Custom Steinhart-Hart 27 - Custom Thermistor - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 19 maximum: 27 adi,rsense-handle: - description: - Phandle pointing to a rsense object associated with this - thermistor. - $ref: "/schemas/types.yaml#/definitions/phandle" + description: Associated sense resistor sensor. + $ref: /schemas/types.yaml#/definitions/phandle adi,single-ended: - description: - Boolean property which set's the thermistor as single-ended. + description: Whether the sensor is single-ended. type: boolean adi,rsense-share: description: - Boolean property which enables Rsense sharing, where one sense - resistor is used for multiple thermistors. Note that this property - is ignored if adi,single-ended is set. + Whether to enable sense resistor sharing, where one sense + resistor is used by multiple sensors. type: boolean adi,current-rotate: description: - Boolean property which enables excitation current rotation to - automatically remove parasitic thermocouple effects. + Whether to enable excitation current rotation to automatically + remove parasitic thermocouple effects. type: boolean adi,excitation-current-nanoamp: description: - This property controls the magnitude of the excitation current - applied to the thermistor. Value 0 set's the sensor in auto-range - mode. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, - 250000, 500000, 1000000] + Excitation current applied to the thermistor. + 0 sets the sensor in auto-range mode. + enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000, + 500000, 1000000] + default: 0 adi,custom-thermistor: description: - This is a table, where each entry should be a pair of - resistance(ohm)-temperature(K). The entries added here are in uohm - and uK only for custom thermistors. For more details look at table - 78 and 79. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint64-matrix + Used for digitizing custom thermistors. + See Page 65 of the datasheet. + $ref: /schemas/types.yaml#/definitions/uint64-matrix minItems: 3 maxItems: 64 items: - minItems: 2 - maxItems: 2 + items: + - description: Resistance point in uOhms. + - description: Temperature point in uK. adi,custom-steinhart: description: - Steinhart-Hart coefficients are also supported and can - be programmed into the device memory using this property. For - Steinhart sensors the coefficients are given in the raw - format. Look at table 82 for more information. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array - items: - minItems: 6 - maxItems: 6 + Steinhart-Hart coefficients in raw format, used for digitizing + custom thermistors. + See Page 68 of the datasheet. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 6 + maxItems: 6 required: - adi,rsense-handle dependencies: - adi,current-rotate: [ adi,rsense-share ] + adi,current-rotate: [ "adi,rsense-share" ] + + allOf: + - if: + properties: + adi,sensor-type: + const: 26 + then: + properties: + adi,excitation-current-nanoamp: + enum: [250, 500, 1000, 5000, 10000, 25000, 50000, 100000, + 250000, 500000, 1000000] + default: 1000 + required: + - adi,custom-steinhart + - if: + properties: + adi,sensor-type: + const: 27 + then: + properties: + adi,excitation-current-nanoamp: + enum: [250, 500, 1000, 5000, 10000, 25000, 50000, 100000, + 250000, 500000, 1000000] + default: 1000 + required: + - adi,custom-thermistor "^adc@": - type: object - description: Represents a channel which is being used as a direct adc. + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false + description: Direct ADC sensor. properties: adi,sensor-type: - description: Identifies the sensor as a direct adc. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + description: Sensor type for direct ADC sensors. + $ref: /schemas/types.yaml#/definitions/uint32 const: 30 adi,single-ended: - description: Boolean property which set's the adc as single-ended. + description: Whether the sensor is single-ended. + type: boolean + + "^temp@": + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false + description: Active analog temperature sensor. + + properties: + adi,sensor-type: + description: Sensor type for active analog temperature sensors. + $ref: /schemas/types.yaml#/definitions/uint32 + const: 31 + + adi,single-ended: + description: Whether the sensor is single-ended. type: boolean + adi,custom-temp: + description: + Used for digitizing active analog temperature sensors. + See Page 67 of the LTM2985 datasheet. + $ref: /schemas/types.yaml#/definitions/uint64-matrix + minItems: 3 + maxItems: 64 + items: + items: + - description: Voltage point in nV, signed. + - description: Temperature point in uK. + + required: + - adi,custom-temp + "^rsense@": - type: object - description: - Represents a rsense which is connected to one of the device channels. - Rsense are used by thermistors and RTD's. + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false + description: Sense resistor sensor. properties: reg: @@ -378,15 +446,12 @@ patternProperties: maximum: 20 adi,sensor-type: - description: Identifies the sensor as a rsense. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + description: Sensor type sense resistor sensors. + $ref: /schemas/types.yaml#/definitions/uint32 const: 29 adi,rsense-val-milli-ohms: - description: - Sets the value of the sense resistor. Look at table 20 of the - datasheet for information. + description: Value of the sense resistor. required: - adi,rsense-val-milli-ohms @@ -398,6 +463,18 @@ required: additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + enum: + - adi,ltc2983 + - adi,ltc2984 + then: + patternProperties: + "^temp@": false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> @@ -405,76 +482,75 @@ examples: #address-cells = <1>; #size-cells = <0>; - sensor_ltc2983: ltc2983@0 { - compatible = "adi,ltc2983"; - reg = <0>; - - #address-cells = <1>; - #size-cells = <0>; - - interrupts = <20 IRQ_TYPE_EDGE_RISING>; - interrupt-parent = <&gpio>; - - thermocouple@18 { - reg = <18>; - adi,sensor-type = <8>; //Type B - adi,sensor-oc-current-microamp = <10>; - adi,cold-junction-handle = <&diode5>; - }; - - diode5: diode@5 { - reg = <5>; - adi,sensor-type = <28>; - }; - - rsense2: rsense@2 { - reg = <2>; - adi,sensor-type = <29>; - adi,rsense-val-milli-ohms = <1200000>; //1.2Kohms - }; - - rtd@14 { - reg = <14>; - adi,sensor-type = <15>; //PT1000 - /*2-wire, internal gnd, no current rotation*/ - adi,number-of-wires = <2>; - adi,rsense-share; - adi,excitation-current-microamp = <500>; - adi,rsense-handle = <&rsense2>; - }; - - adc@10 { - reg = <10>; - adi,sensor-type = <30>; - adi,single-ended; - }; - - thermistor@12 { - reg = <12>; - adi,sensor-type = <26>; //Steinhart - adi,rsense-handle = <&rsense2>; - adi,custom-steinhart = <0x00F371EC 0x12345678 - 0x2C0F8733 0x10018C66 0xA0FEACCD - 0x90021D99>; //6 entries - }; - - thermocouple@20 { - reg = <20>; - adi,sensor-type = <9>; //custom thermocouple - adi,single-ended; - adi,custom-thermocouple = /bits/ 64 - <(-50220000) 0>, - <(-30200000) 99100000>, - <(-5300000) 135400000>, - <0 273150000>, - <40200000 361200000>, - <55300000 522100000>, - <88300000 720300000>, - <132200000 811200000>, - <188700000 922500000>, - <460400000 1000000000>; //10 pairs - }; - + temperature-sensor@0 { + compatible = "adi,ltc2983"; + reg = <0>; + + #address-cells = <1>; + #size-cells = <0>; + + interrupts = <20 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpio>; + + thermocouple@18 { + reg = <18>; + adi,sensor-type = <8>; //Type B + adi,sensor-oc-current-microamp = <10>; + adi,cold-junction-handle = <&diode5>; + }; + + diode5: diode@5 { + reg = <5>; + adi,sensor-type = <28>; + }; + + rsense2: rsense@2 { + reg = <2>; + adi,sensor-type = <29>; + adi,rsense-val-milli-ohms = <1200000>; //1.2Kohms + }; + + rtd@14 { + reg = <14>; + adi,sensor-type = <15>; //PT1000 + /*2-wire, internal gnd, no current rotation*/ + adi,number-of-wires = <2>; + adi,rsense-share; + adi,excitation-current-microamp = <500>; + adi,rsense-handle = <&rsense2>; + }; + + adc@10 { + reg = <10>; + adi,sensor-type = <30>; + adi,single-ended; + }; + + thermistor@12 { + reg = <12>; + adi,sensor-type = <26>; //Steinhart + adi,rsense-handle = <&rsense2>; + adi,custom-steinhart = <0x00f371ec 0x12345678 + 0x2c0f8733 0x10018c66 0xa0feaccd + 0x90021d99>; //6 entries + }; + + thermocouple@20 { + reg = <20>; + adi,sensor-type = <9>; //custom thermocouple + adi,single-ended; + adi,custom-thermocouple = + /bits/ 64 <(-50220000) 0>, + /bits/ 64 <(-30200000) 99100000>, + /bits/ 64 <(-5300000) 135400000>, + /bits/ 64 <0 273150000>, + /bits/ 64 <40200000 361200000>, + /bits/ 64 <55300000 522100000>, + /bits/ 64 <88300000 720300000>, + /bits/ 64 <132200000 811200000>, + /bits/ 64 <188700000 922500000>, + /bits/ 64 <460400000 1000000000>; //10 pairs + }; }; }; ... |