diff options
Diffstat (limited to 'dts/Bindings/iio/temperature/adi,ltc2983.yaml')
| -rw-r--r-- | dts/Bindings/iio/temperature/adi,ltc2983.yaml | 60 |
1 files changed, 23 insertions, 37 deletions
diff --git a/dts/Bindings/iio/temperature/adi,ltc2983.yaml b/dts/Bindings/iio/temperature/adi,ltc2983.yaml index 8fb46de664..40ccbe7b5c 100644 --- a/dts/Bindings/iio/temperature/adi,ltc2983.yaml +++ b/dts/Bindings/iio/temperature/adi,ltc2983.yaml @@ -42,10 +42,9 @@ properties: 0 - 50/60Hz rejection 1 - 60Hz rejection 2 - 50Hz rejection - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 2 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 2 '#address-cells': const: 1 @@ -91,8 +90,7 @@ patternProperties: 7 - Type T Thermocouple 8 - Type B Thermocouple 9 - Custom Thermocouple - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 1 maximum: 9 @@ -121,8 +119,7 @@ patternProperties: more details look at table 69 and 70. Note should be signed, but dtc doesn't currently maintain the sign. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint64-matrix + $ref: /schemas/types.yaml#/definitions/uint64-matrix minItems: 3 maxItems: 64 items: @@ -138,8 +135,7 @@ patternProperties: properties: adi,sensor-type: description: Identifies the sensor as a diode. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 const: 28 adi,single-ended: @@ -196,8 +192,7 @@ patternProperties: 16 - RTD PT-1000 (0.00375) 17 - RTD NI-120 18 - RTD Custom - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 10 maximum: 18 @@ -210,9 +205,8 @@ patternProperties: description: Identifies the number of wires used by the RTD. Setting this property to 5 means 4 wires with Kelvin Rsense. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [2, 3, 4, 5] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [2, 3, 4, 5] adi,rsense-share: description: @@ -237,18 +231,16 @@ patternProperties: description: This property set the RTD curve used and the corresponding Callendar-VanDusen constants. Look at table 30 of the datasheet. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - minimum: 0 - maximum: 3 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 adi,custom-rtd: description: This is a table, where each entry should be a pair of resistance(ohm)-temperature(K). The entries added here are in uohm and uK. For more details values look at table 74 and 75. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint64-matrix + $ref: /schemas/types.yaml#/definitions/uint64-matrix items: minItems: 3 maxItems: 64 @@ -260,7 +252,7 @@ patternProperties: - adi,rsense-handle dependencies: - adi,current-rotate: [ adi,rsense-share ] + adi,current-rotate: [ "adi,rsense-share" ] "^thermistor@": type: object @@ -280,8 +272,7 @@ patternProperties: 25 - Thermistor Spectrum 1003k 1kohm 26 - Thermistor Custom Steinhart-Hart 27 - Custom Thermistor - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 19 maximum: 27 @@ -314,10 +305,9 @@ patternProperties: This property controls the magnitude of the excitation current applied to the thermistor. Value 0 set's the sensor in auto-range mode. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 - - enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, - 250000, 500000, 1000000] + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000, + 500000, 1000000] adi,custom-thermistor: description: @@ -325,8 +315,7 @@ patternProperties: resistance(ohm)-temperature(K). The entries added here are in uohm and uK only for custom thermistors. For more details look at table 78 and 79. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint64-matrix + $ref: /schemas/types.yaml#/definitions/uint64-matrix minItems: 3 maxItems: 64 items: @@ -339,8 +328,7 @@ patternProperties: be programmed into the device memory using this property. For Steinhart sensors the coefficients are given in the raw format. Look at table 82 for more information. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32-array items: minItems: 6 maxItems: 6 @@ -349,7 +337,7 @@ patternProperties: - adi,rsense-handle dependencies: - adi,current-rotate: [ adi,rsense-share ] + adi,current-rotate: [ "adi,rsense-share" ] "^adc@": type: object @@ -358,8 +346,7 @@ patternProperties: properties: adi,sensor-type: description: Identifies the sensor as a direct adc. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 const: 30 adi,single-ended: @@ -379,8 +366,7 @@ patternProperties: adi,sensor-type: description: Identifies the sensor as a rsense. - allOf: - - $ref: /schemas/types.yaml#/definitions/uint32 + $ref: /schemas/types.yaml#/definitions/uint32 const: 29 adi,rsense-val-milli-ohms: |