diff options
Diffstat (limited to 'dts/Bindings/iio')
205 files changed, 5905 insertions, 1141 deletions
diff --git a/dts/Bindings/iio/accel/adi,adis16201.yaml b/dts/Bindings/iio/accel/adi,adis16201.yaml index 6f8f8a6258..b6ba7ad1a8 100644 --- a/dts/Bindings/iio/accel/adi,adis16201.yaml +++ b/dts/Bindings/iio/accel/adi,adis16201.yaml @@ -27,20 +27,21 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true - vdd-supply: true required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | #include <dt-bindings/interrupt-controller/irq.h> - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/Bindings/iio/accel/adi,adis16240.yaml b/dts/Bindings/iio/accel/adi,adis16240.yaml index 8d829ef878..5887021cc9 100644 --- a/dts/Bindings/iio/accel/adi,adis16240.yaml +++ b/dts/Bindings/iio/accel/adi,adis16240.yaml @@ -25,20 +25,21 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true - required: - compatible - reg - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/Bindings/iio/accel/adi,adxl313.yaml b/dts/Bindings/iio/accel/adi,adxl313.yaml index d6afc1b8c2..0c5b64cae9 100644 --- a/dts/Bindings/iio/accel/adi,adxl313.yaml +++ b/dts/Bindings/iio/accel/adi,adxl313.yaml @@ -4,28 +4,30 @@ $id: http://devicetree.org/schemas/iio/accel/adi,adxl313.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Analog Devices ADXL313 3-Axis Digital Accelerometer +title: Analog Devices ADXL312, ADXL313, and ADXL314 3-Axis Digital Accelerometers maintainers: - Lucas Stankus <lucas.p.stankus@gmail.com> description: | - Analog Devices ADXL313 3-Axis Digital Accelerometer that supports - both I2C & SPI interfaces. + Analog Devices ADXL312, ADXL313, and ADXL314 3-Axis Digital Accelerometer that + support both I2C & SPI interfaces. + https://www.analog.com/en/products/adxl312.html https://www.analog.com/en/products/adxl313.html + https://www.analog.com/en/products/adxl314.html properties: compatible: enum: + - adi,adxl312 - adi,adxl313 + - adi,adxl314 reg: maxItems: 1 spi-3wire: true - spi-max-frequency: true - vs-supply: description: Regulator that supplies power to the accelerometer @@ -48,13 +50,16 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/Bindings/iio/accel/adi,adxl345.yaml b/dts/Bindings/iio/accel/adi,adxl345.yaml index 9bb039e2f5..07cacc3f6a 100644 --- a/dts/Bindings/iio/accel/adi,adxl345.yaml +++ b/dts/Bindings/iio/accel/adi,adxl345.yaml @@ -32,8 +32,6 @@ properties: spi-cpol: true - spi-max-frequency: true - interrupts: maxItems: 1 @@ -42,13 +40,16 @@ required: - reg - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; @@ -63,7 +64,7 @@ examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/Bindings/iio/accel/adi,adxl355.yaml b/dts/Bindings/iio/accel/adi,adxl355.yaml index ba54d6998f..c07261c710 100644 --- a/dts/Bindings/iio/accel/adi,adxl355.yaml +++ b/dts/Bindings/iio/accel/adi,adxl355.yaml @@ -4,20 +4,22 @@ $id: http://devicetree.org/schemas/iio/accel/adi,adxl355.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer +title: Analog Devices ADXL355 and ADXL359 3-Axis, Low noise MEMS Accelerometers maintainers: - Puranjay Mohan <puranjay12@gmail.com> description: | - Analog Devices ADXL355 3-Axis, Low noise MEMS Accelerometer that supports - both I2C & SPI interfaces + Analog Devices ADXL355 and ADXL359 3-Axis, Low noise MEMS Accelerometers that + support both I2C & SPI interfaces https://www.analog.com/en/products/adxl355.html + https://www.analog.com/en/products/adxl359.html properties: compatible: enum: - adi,adxl355 + - adi,adxl359 reg: maxItems: 1 @@ -45,44 +47,45 @@ properties: vddio-supply: description: Regulator that provides power to the bus - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | - #include <dt-bindings/gpio/gpio.h> - #include <dt-bindings/interrupt-controller/irq.h> - i2c { - #address-cells = <1>; - #size-cells = <0>; + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; - /* Example for a I2C device node */ - accelerometer@1d { - compatible = "adi,adxl355"; - reg = <0x1d>; - interrupt-parent = <&gpio>; - interrupts = <25 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "DRDY"; - }; + /* Example for a I2C device node */ + accelerometer@1d { + compatible = "adi,adxl355"; + reg = <0x1d>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "DRDY"; }; + }; - | - #include <dt-bindings/gpio/gpio.h> - #include <dt-bindings/interrupt-controller/irq.h> - spi { - #address-cells = <1>; - #size-cells = <0>; + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; - accelerometer@0 { - compatible = "adi,adxl355"; - reg = <0>; - spi-max-frequency = <1000000>; - interrupt-parent = <&gpio>; - interrupts = <25 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "DRDY"; - }; + accelerometer@0 { + compatible = "adi,adxl355"; + reg = <0>; + spi-max-frequency = <1000000>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "DRDY"; }; + }; diff --git a/dts/Bindings/iio/accel/adi,adxl367.yaml b/dts/Bindings/iio/accel/adi,adxl367.yaml index d259e796c1..f10d98d34c 100644 --- a/dts/Bindings/iio/accel/adi,adxl367.yaml +++ b/dts/Bindings/iio/accel/adi,adxl367.yaml @@ -35,8 +35,6 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true - vdd-supply: true vddio-supply: true @@ -45,7 +43,10 @@ required: - reg - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/accel/adi,adxl372.yaml b/dts/Bindings/iio/accel/adi,adxl372.yaml index 38b59b6454..62465e36a5 100644 --- a/dts/Bindings/iio/accel/adi,adxl372.yaml +++ b/dts/Bindings/iio/accel/adi,adxl372.yaml @@ -25,43 +25,44 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true - required: - compatible - reg - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | - #include <dt-bindings/gpio/gpio.h> - #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { - #address-cells = <1>; - #size-cells = <0>; + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; - /* Example for a I2C device node */ - accelerometer@53 { - compatible = "adi,adxl372"; - reg = <0x53>; - interrupt-parent = <&gpio>; - interrupts = <25 IRQ_TYPE_EDGE_FALLING>; - }; + /* Example for a I2C device node */ + accelerometer@53 { + compatible = "adi,adxl372"; + reg = <0x53>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; }; + }; - | - #include <dt-bindings/gpio/gpio.h> - #include <dt-bindings/interrupt-controller/irq.h> - spi0 { - #address-cells = <1>; - #size-cells = <0>; + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; - accelerometer@0 { - compatible = "adi,adxl372"; - reg = <0>; - spi-max-frequency = <1000000>; - interrupt-parent = <&gpio>; - interrupts = <25 IRQ_TYPE_EDGE_FALLING>; - }; + accelerometer@0 { + compatible = "adi,adxl372"; + reg = <0>; + spi-max-frequency = <1000000>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; }; + }; diff --git a/dts/Bindings/iio/accel/bosch,bma220.yaml b/dts/Bindings/iio/accel/bosch,bma220.yaml index 942b23ad07..ec643de031 100644 --- a/dts/Bindings/iio/accel/bosch,bma220.yaml +++ b/dts/Bindings/iio/accel/bosch,bma220.yaml @@ -20,8 +20,6 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true - vdda-supply: true vddd-supply: true vddio-supply: true @@ -30,12 +28,15 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | #include <dt-bindings/interrupt-controller/irq.h> - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/Bindings/iio/accel/bosch,bma255.yaml b/dts/Bindings/iio/accel/bosch,bma255.yaml index 478e75ae08..457a709b58 100644 --- a/dts/Bindings/iio/accel/bosch,bma255.yaml +++ b/dts/Bindings/iio/accel/bosch,bma255.yaml @@ -72,7 +72,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/accel/bosch,bmi088.yaml b/dts/Bindings/iio/accel/bosch,bmi088.yaml index 272eb48eef..3cb82576d7 100644 --- a/dts/Bindings/iio/accel/bosch,bmi088.yaml +++ b/dts/Bindings/iio/accel/bosch,bmi088.yaml @@ -24,8 +24,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vdd-supply: true vddio-supply: true @@ -50,7 +48,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/accel/fsl,mma7455.yaml b/dts/Bindings/iio/accel/fsl,mma7455.yaml index 9c7c66feef..cb31e75ba6 100644 --- a/dts/Bindings/iio/accel/fsl,mma7455.yaml +++ b/dts/Bindings/iio/accel/fsl,mma7455.yaml @@ -36,16 +36,17 @@ properties: maxItems: 2 items: enum: - - "INT1" - - "INT2" - - spi-max-frequency: true + - INT1 + - INT2 required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/accel/kionix,kx022a.yaml b/dts/Bindings/iio/accel/kionix,kx022a.yaml new file mode 100644 index 0000000000..66ea894dbe --- /dev/null +++ b/dts/Bindings/iio/accel/kionix,kx022a.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/kionix,kx022a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM/Kionix KX022A, KX132-1211 and KX132ACR-LBZ Accelerometers + +maintainers: + - Matti Vaittinen <mazziesaccount@gmail.com> + +description: | + KX022A, KX132ACR-LBZ and KX132-1211 are 3-axis accelerometers supporting + +/- 2G, 4G, 8G and 16G ranges, variable output data-rates and a + hardware-fifo buffering. These accelerometers can be accessed either + via I2C or SPI. + +properties: + compatible: + enum: + - kionix,kx022a + - kionix,kx132-1211 + - rohm,kx132acr-lbz + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + items: + - enum: [INT1, INT2] + - const: INT2 + + vdd-supply: true + io-vdd-supply: true + + mount-matrix: + description: | + an optional 3x3 mounting rotation matrix. + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + accel@1f { + compatible = "kionix,kx022a"; + reg = <0x1f>; + + interrupt-parent = <&gpio1>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + interrupt-names = "INT1"; + + io-vdd-supply = <&iovdd>; + vdd-supply = <&vdd>; + }; + }; diff --git a/dts/Bindings/iio/accel/kionix,kxcjk1013.yaml b/dts/Bindings/iio/accel/kionix,kxcjk1013.yaml index 714e48e613..6ddb03f61b 100644 --- a/dts/Bindings/iio/accel/kionix,kxcjk1013.yaml +++ b/dts/Bindings/iio/accel/kionix,kxcjk1013.yaml @@ -44,7 +44,7 @@ examples: accel@f { compatible = "kionix,kxtf9"; - reg = <0x0F>; + reg = <0xf>; mount-matrix = "0", "1", "0", "1", "0", "0", "0", "0", "1"; diff --git a/dts/Bindings/iio/accel/kionix,kxsd9.yaml b/dts/Bindings/iio/accel/kionix,kxsd9.yaml index 390b87242f..f64d99b354 100644 --- a/dts/Bindings/iio/accel/kionix,kxsd9.yaml +++ b/dts/Bindings/iio/accel/kionix,kxsd9.yaml @@ -29,13 +29,14 @@ properties: mount-matrix: description: an optional 3x3 mounting rotation matrix. - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/accel/memsensing,msa311.yaml b/dts/Bindings/iio/accel/memsensing,msa311.yaml new file mode 100644 index 0000000000..d530ec041f --- /dev/null +++ b/dts/Bindings/iio/accel/memsensing,msa311.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/accel/memsensing,msa311.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MEMSensing digital 3-Axis accelerometer + +maintainers: + - Dmitry Rokosov <ddrokosov@sberdevices.ru> + +description: | + MSA311 is a tri-axial, low-g accelerometer with I2C digital output for + sensitivity consumer applications. It has dynamical user selectable full + scales range of +-2g/+-4g/+-8g/+-16g and allows acceleration measurements + with output data rates from 1Hz to 1000Hz. + Datasheet can be found at following URL + https://cdn-shop.adafruit.com/product-files/5309/MSA311-V1.1-ENG.pdf + +properties: + compatible: + const: memsensing,msa311 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + accelerometer@62 { + compatible = "memsensing,msa311"; + reg = <0x62>; + interrupt-parent = <&gpio_intc>; + interrupts = <29 IRQ_TYPE_EDGE_RISING>; + vdd-supply = <&vcc_5v>; + }; + }; diff --git a/dts/Bindings/iio/accel/murata,sca3300.yaml b/dts/Bindings/iio/accel/murata,sca3300.yaml index f6e2a16a71..00c990caa1 100644 --- a/dts/Bindings/iio/accel/murata,sca3300.yaml +++ b/dts/Bindings/iio/accel/murata,sca3300.yaml @@ -29,7 +29,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/accel/nxp,fxls8962af.yaml b/dts/Bindings/iio/accel/nxp,fxls8962af.yaml index ad529ab2c6..783c7ddfcd 100644 --- a/dts/Bindings/iio/accel/nxp,fxls8962af.yaml +++ b/dts/Bindings/iio/accel/nxp,fxls8962af.yaml @@ -27,8 +27,6 @@ properties: vdd-supply: description: phandle to the regulator that provides power to the accelerometer - spi-max-frequency: true - interrupts: maxItems: 1 @@ -44,12 +42,15 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; @@ -64,7 +65,7 @@ examples: }; - | #include <dt-bindings/interrupt-controller/irq.h> - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/Bindings/iio/adc/adc.yaml b/dts/Bindings/iio/adc/adc.yaml index db348fcbb5..36775f8f71 100644 --- a/dts/Bindings/iio/adc/adc.yaml +++ b/dts/Bindings/iio/adc/adc.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/iio/adc/adc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Generic IIO bindings for ADC channels +title: IIO Common Properties for ADC Channels maintainers: - Jonathan Cameron <jic23@kernel.org> @@ -22,7 +22,6 @@ properties: maxItems: 1 label: - $ref: /schemas/types.yaml#/definitions/string description: Unique name to identify which channel this is. bipolar: diff --git a/dts/Bindings/iio/adc/adi,ad4130.yaml b/dts/Bindings/iio/adc/adi,ad4130.yaml new file mode 100644 index 0000000000..d00690a8d3 --- /dev/null +++ b/dts/Bindings/iio/adc/adi,ad4130.yaml @@ -0,0 +1,262 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2022 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,ad4130.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD4130 ADC device driver + +maintainers: + - Cosmin Tanislav <cosmin.tanislav@analog.com> + +description: | + Bindings for the Analog Devices AD4130 ADC. Datasheet can be found here: + https://www.analog.com/media/en/technical-documentation/data-sheets/AD4130-8.pdf + +properties: + compatible: + enum: + - adi,ad4130 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: phandle to the master clock (mclk) + + clock-names: + items: + - const: mclk + + interrupts: + maxItems: 1 + + interrupt-names: + description: | + Specify which interrupt pin should be configured as Data Ready / FIFO + interrupt. + Default if not supplied is int. + enum: + - int + - clk + - p2 + - dout + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + '#clock-cells': + const: 0 + + clock-output-names: + maxItems: 1 + + refin1-supply: + description: refin1 supply. Can be used as reference for conversion. + + refin2-supply: + description: refin2 supply. Can be used as reference for conversion. + + avdd-supply: + description: AVDD voltage supply. Can be used as reference for conversion. + + iovdd-supply: + description: IOVDD voltage supply. Used for the chip interface. + + spi-max-frequency: + maximum: 5000000 + + adi,ext-clk-freq-hz: + description: Specify the frequency of the external clock. + enum: [76800, 153600] + default: 76800 + + adi,bipolar: + description: Specify if the device should be used in bipolar mode. + type: boolean + + adi,vbias-pins: + description: Analog inputs to apply a voltage bias of (AVDD − AVSS) / 2 to. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 16 + items: + minimum: 0 + maximum: 15 + +required: + - compatible + - reg + - interrupts + +patternProperties: + "^channel@([0-9a-f])$": + type: object + $ref: adc.yaml + unevaluatedProperties: false + + properties: + reg: + description: The channel number. + minimum: 0 + maximum: 15 + + diff-channels: + description: | + Besides the analog inputs available, internal inputs can be used. + 16: Internal temperature sensor. + 17: AVSS + 18: Internal reference + 19: DGND + 20: (AVDD − AVSS)/6+ + 21: (AVDD − AVSS)/6- + 22: (IOVDD − DGND)/6+ + 23: (IOVDD − DGND)/6- + 24: (ALDO − AVSS)/6+ + 25: (ALDO − AVSS)/6- + 26: (DLDO − DGND)/6+ + 27: (DLDO − DGND)/6- + 28: V_MV_P + 29: V_MV_M + items: + minimum: 0 + maximum: 29 + + adi,reference-select: + description: | + Select the reference source to use when converting on the + specific channel. Valid values are: + 0: REFIN1(+)/REFIN1(−) + 1: REFIN2(+)/REFIN2(−) + 2: REFOUT/AVSS (Internal reference) + 3: AVDD/AVSS + If not specified, REFIN1 is used. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + + adi,excitation-pin-0: + description: | + Analog input to apply excitation current to while the channel + is active. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 0 + + adi,excitation-pin-1: + description: | + Analog input to apply excitation current to while this channel + is active. + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 15 + default: 0 + + adi,excitation-current-0-nanoamp: + description: | + Excitation current in nanoamps to be applied to pin specified in + adi,excitation-pin-0 while this channel is active. + enum: [0, 100, 10000, 20000, 50000, 100000, 150000, 200000] + default: 0 + + adi,excitation-current-1-nanoamp: + description: | + Excitation current in nanoamps to be applied to pin specified in + adi,excitation-pin-1 while this channel is active. + enum: [0, 100, 10000, 20000, 50000, 100000, 150000, 200000] + default: 0 + + adi,burnout-current-nanoamp: + description: | + Burnout current in nanoamps to be applied for this channel. + enum: [0, 500, 2000, 4000] + default: 0 + + adi,buffered-positive: + description: Enable buffered mode for positive input. + type: boolean + + adi,buffered-negative: + description: Enable buffered mode for negative input. + type: boolean + + required: + - reg + - diff-channels + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad4130"; + reg = <0>; + + #address-cells = <1>; + #size-cells = <0>; + + spi-max-frequency = <5000000>; + interrupts = <27 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio>; + + channel@0 { + reg = <0>; + + adi,reference-select = <2>; + + /* AIN8, AIN9 */ + diff-channels = <8 9>; + }; + + channel@1 { + reg = <1>; + + adi,reference-select = <2>; + + /* AIN10, AIN11 */ + diff-channels = <10 11>; + }; + + channel@2 { + reg = <2>; + + adi,reference-select = <2>; + + /* Temperature Sensor, DGND */ + diff-channels = <16 19>; + }; + + channel@3 { + reg = <3>; + + adi,reference-select = <2>; + + /* Internal reference, DGND */ + diff-channels = <18 19>; + }; + + channel@4 { + reg = <4>; + + adi,reference-select = <2>; + + /* DGND, DGND */ + diff-channels = <19 19>; + }; + }; + }; diff --git a/dts/Bindings/iio/adc/adi,ad7091r5.yaml b/dts/Bindings/iio/adc/adi,ad7091r5.yaml index b97559f23b..ddec974743 100644 --- a/dts/Bindings/iio/adc/adi,ad7091r5.yaml +++ b/dts/Bindings/iio/adc/adi,ad7091r5.yaml @@ -4,36 +4,92 @@ $id: http://devicetree.org/schemas/iio/adc/adi,ad7091r5.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Analog Devices AD7091R5 4-Channel 12-Bit ADC +title: Analog Devices AD7091R-2/-4/-5/-8 Multi-Channel 12-Bit ADCs maintainers: - Michael Hennerich <michael.hennerich@analog.com> + - Marcelo Schmitt <marcelo.schmitt@analog.com> description: | - Analog Devices AD7091R5 4-Channel 12-Bit ADC + Analog Devices AD7091R5 4-Channel 12-Bit ADC supporting I2C interface https://www.analog.com/media/en/technical-documentation/data-sheets/ad7091r-5.pdf + Analog Devices AD7091R-2/AD7091R-4/AD7091R-8 2-/4-/8-Channel 12-Bit ADCs + supporting SPI interface + https://www.analog.com/media/en/technical-documentation/data-sheets/AD7091R-2_7091R-4_7091R-8.pdf properties: compatible: enum: + - adi,ad7091r2 + - adi,ad7091r4 - adi,ad7091r5 + - adi,ad7091r8 reg: maxItems: 1 + vdd-supply: + description: + Provide VDD power to the sensor (VDD range is from 2.7V to 5.25V). + + vdrive-supply: + description: + Determines the voltage level at which the interface logic will operate. + The V_drive voltage range is from 1.8V to 5.25V and must not exceed VDD by + more than 0.3V. + vref-supply: description: Phandle to the vref power supply - interrupts: + convst-gpios: + description: + GPIO connected to the CONVST pin. + This logic input is used to initiate conversions on the analog + input channels. maxItems: 1 + reset-gpios: + maxItems: 1 + + interrupts: + description: + Interrupt for signaling when conversion results exceed the high limit for + ADC readings or fall below the low limit for them. Interrupt source must + be attached to ALERT/BUSY/GPO0 pin. + maxItems: 1 required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + + # AD7091R-2 does not have ALERT/BUSY/GPO pin + - if: + properties: + compatible: + contains: + enum: + - adi,ad7091r2 + then: + properties: + interrupts: false + + - if: + properties: + compatible: + contains: + enum: + - adi,ad7091r2 + - adi,ad7091r4 + - adi,ad7091r8 + then: + required: + - convst-gpios + +unevaluatedProperties: false examples: - | @@ -44,11 +100,29 @@ examples: #size-cells = <0>; adc@2f { - compatible = "adi,ad7091r5"; - reg = <0x2f>; + compatible = "adi,ad7091r5"; + reg = <0x2f>; + + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio>; + }; + }; + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; - interrupts = <25 IRQ_TYPE_EDGE_FALLING>; - interrupt-parent = <&gpio>; + adc@0 { + compatible = "adi,ad7091r8"; + reg = <0x0>; + spi-max-frequency = <1000000>; + vref-supply = <&adc_vref>; + convst-gpios = <&gpio 25 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + interrupts = <22 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio>; }; }; ... diff --git a/dts/Bindings/iio/adc/adi,ad7124.yaml b/dts/Bindings/iio/adc/adi,ad7124.yaml index fb3d0dae9b..35ed04350e 100644 --- a/dts/Bindings/iio/adc/adi,ad7124.yaml +++ b/dts/Bindings/iio/adc/adi,ad7124.yaml @@ -52,8 +52,6 @@ properties: avdd-supply: description: avdd supply can be used as reference for conversion. - spi-max-frequency: true - required: - compatible - reg @@ -63,7 +61,7 @@ required: patternProperties: "^channel@([0-9]|1[0-5])$": - $ref: "adc.yaml" + $ref: adc.yaml type: object description: | Represents the external channels which are connected to the ADC. @@ -106,7 +104,10 @@ patternProperties: additionalProperties: false -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/adc/adi,ad7192.yaml b/dts/Bindings/iio/adc/adi,ad7192.yaml index 22b7ed3723..16def2985a 100644 --- a/dts/Bindings/iio/adc/adi,ad7192.yaml +++ b/dts/Bindings/iio/adc/adi,ad7192.yaml @@ -30,8 +30,6 @@ properties: spi-cpha: true - spi-max-frequency: true - clocks: maxItems: 1 description: phandle to the master clock (mclk) @@ -49,6 +47,9 @@ properties: avdd-supply: description: AVdd voltage supply + vref-supply: + description: VRef voltage supply + adi,rejection-60-Hz-enable: description: | This bit enables a notch at 60 Hz when the first notch of the sinc @@ -91,33 +92,38 @@ required: - interrupts - dvdd-supply - avdd-supply + - vref-supply - spi-cpol - spi-cpha -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | - spi0 { - #address-cells = <1>; - #size-cells = <0>; - - adc@0 { - compatible = "adi,ad7192"; - reg = <0>; - spi-max-frequency = <1000000>; - spi-cpol; - spi-cpha; - clocks = <&ad7192_mclk>; - clock-names = "mclk"; - interrupts = <25 0x2>; - interrupt-parent = <&gpio>; - dvdd-supply = <&dvdd>; - avdd-supply = <&avdd>; - - adi,refin2-pins-enable; - adi,rejection-60-Hz-enable; - adi,buffer-enable; - adi,burnout-currents-enable; + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "adi,ad7192"; + reg = <0>; + spi-max-frequency = <1000000>; + spi-cpol; + spi-cpha; + clocks = <&ad7192_mclk>; + clock-names = "mclk"; + interrupts = <25 0x2>; + interrupt-parent = <&gpio>; + dvdd-supply = <&dvdd>; + avdd-supply = <&avdd>; + vref-supply = <&vref>; + + adi,refin2-pins-enable; + adi,rejection-60-Hz-enable; + adi,buffer-enable; + adi,burnout-currents-enable; }; }; diff --git a/dts/Bindings/iio/adc/adi,ad7280a.yaml b/dts/Bindings/iio/adc/adi,ad7280a.yaml index a694d5794d..dfb8f305e2 100644 --- a/dts/Bindings/iio/adc/adi,ad7280a.yaml +++ b/dts/Bindings/iio/adc/adi,ad7280a.yaml @@ -28,8 +28,6 @@ properties: description: IRQ line for the ADC maxItems: 1 - spi-max-frequency: true - adi,voltage-alert-last-chan: $ref: /schemas/types.yaml#/definitions/uint32 description: @@ -55,7 +53,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/adc/adi,ad7292.yaml b/dts/Bindings/iio/adc/adi,ad7292.yaml index a3e39a40c9..2aa1f4b063 100644 --- a/dts/Bindings/iio/adc/adi,ad7292.yaml +++ b/dts/Bindings/iio/adc/adi,ad7292.yaml @@ -30,8 +30,6 @@ properties: spi-cpha: true - spi-max-frequency: true - '#address-cells': const: 1 @@ -45,7 +43,7 @@ required: patternProperties: "^channel@[0-7]$": - $ref: "adc.yaml" + $ref: adc.yaml type: object description: | Represents the external channels which are connected to the ADC. @@ -63,9 +61,12 @@ patternProperties: required: - reg - additionalProperties: true + additionalProperties: false + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/adc/adi,ad7298.yaml b/dts/Bindings/iio/adc/adi,ad7298.yaml index ca414bb396..cd8ac5162d 100644 --- a/dts/Bindings/iio/adc/adi,ad7298.yaml +++ b/dts/Bindings/iio/adc/adi,ad7298.yaml @@ -24,13 +24,15 @@ properties: vref-supply: true vdd-supply: true - spi-max-frequency: true required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/adc/adi,ad7476.yaml b/dts/Bindings/iio/adc/adi,ad7476.yaml index 666414a9c0..44c671eeda 100644 --- a/dts/Bindings/iio/adc/adi,ad7476.yaml +++ b/dts/Bindings/iio/adc/adi,ad7476.yaml @@ -66,8 +66,6 @@ properties: to the other supplies. Needed to be able to establish channel scaling unless there is also an internal reference available (e.g. ad7091r) - spi-max-frequency: true - adi,conversion-start-gpios: description: A GPIO used to trigger the start of a conversion maxItems: 1 @@ -76,9 +74,9 @@ required: - compatible - reg -additionalProperties: false - allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + # Devices where reference is vcc - if: properties: @@ -158,6 +156,8 @@ allOf: properties: adi,conversion-start-gpios: false +unevaluatedProperties: false + examples: - | spi { diff --git a/dts/Bindings/iio/adc/adi,ad7606.yaml b/dts/Bindings/iio/adc/adi,ad7606.yaml index 516fc24d33..7fa46df1f4 100644 --- a/dts/Bindings/iio/adc/adi,ad7606.yaml +++ b/dts/Bindings/iio/adc/adi,ad7606.yaml @@ -32,8 +32,6 @@ properties: spi-cpol: true - spi-max-frequency: true - avcc-supply: true interrupts: @@ -105,36 +103,39 @@ required: - interrupts - adi,conversion-start-gpios -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; adc@0 { - compatible = "adi,ad7606-8"; - reg = <0>; - spi-max-frequency = <1000000>; - spi-cpol; - spi-cpha; - - avcc-supply = <&adc_vref>; - - interrupts = <25 IRQ_TYPE_EDGE_FALLING>; - interrupt-parent = <&gpio>; - - adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>; - adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; - adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>, - <&gpio 23 GPIO_ACTIVE_HIGH>, - <&gpio 26 GPIO_ACTIVE_HIGH>; - standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>; - adi,sw-mode; + compatible = "adi,ad7606-8"; + reg = <0>; + spi-max-frequency = <1000000>; + spi-cpol; + spi-cpha; + + avcc-supply = <&adc_vref>; + + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio>; + + adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>; + reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>; + adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>; + adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH>, + <&gpio 23 GPIO_ACTIVE_HIGH>, + <&gpio 26 GPIO_ACTIVE_HIGH>; + standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>; + adi,sw-mode; }; }; ... diff --git a/dts/Bindings/iio/adc/adi,ad7768-1.yaml b/dts/Bindings/iio/adc/adi,ad7768-1.yaml index a85a28145e..3ce59d4d06 100644 --- a/dts/Bindings/iio/adc/adi,ad7768-1.yaml +++ b/dts/Bindings/iio/adc/adi,ad7768-1.yaml @@ -50,8 +50,6 @@ properties: reset-gpios: maxItems: 1 - spi-max-frequency: true - spi-cpol: true spi-cpha: true @@ -88,7 +86,10 @@ patternProperties: - reg additionalProperties: false -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/adc/adi,ad7780.yaml b/dts/Bindings/iio/adc/adi,ad7780.yaml index a67ba67dab..be2616ff9a 100644 --- a/dts/Bindings/iio/adc/adi,ad7780.yaml +++ b/dts/Bindings/iio/adc/adi,ad7780.yaml @@ -72,7 +72,7 @@ additionalProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; @@ -80,9 +80,9 @@ examples: compatible = "adi,ad7780"; reg = <0>; - avdd-supply = <&vdd_supply>; - powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; - adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; + avdd-supply = <&vdd_supply>; + powerdown-gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + adi,gain-gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; adi,filter-gpios = <&gpio2 15 GPIO_ACTIVE_LOW>; }; }; diff --git a/dts/Bindings/iio/adc/adi,ad7923.yaml b/dts/Bindings/iio/adc/adi,ad7923.yaml index e82194974e..85148338c5 100644 --- a/dts/Bindings/iio/adc/adi,ad7923.yaml +++ b/dts/Bindings/iio/adc/adi,ad7923.yaml @@ -8,11 +8,10 @@ title: Analog Devices AD7923 and similars with 4 and 8 Channel ADCs. maintainers: - Michael Hennerich <michael.hennerich@analog.com> - - Patrick Vasseur <patrick.vasseur@c-s.fr> description: | Analog Devices AD7904, AD7914, AD7923, AD7924 4 Channel ADCs, and AD7908, - AD7918, AD7928 8 Channels ADCs. + AD7918, AD7927, AD7928 8 Channels ADCs. Specifications about the part can be found at: https://www.analog.com/media/en/technical-documentation/data-sheets/AD7923.pdf @@ -21,14 +20,22 @@ description: | properties: compatible: - enum: - - adi,ad7904 - - adi,ad7914 - - adi,ad7923 - - adi,ad7924 - - adi,ad7908 - - adi,ad7918 - - adi,ad7928 + oneOf: + - enum: + - adi,ad7904 + - adi,ad7908 + - adi,ad7914 + - adi,ad7918 + - adi,ad7923 + - adi,ad7928 + - const: adi,ad7924 + deprecated: true + - items: + - const: adi,ad7924 + - const: adi,ad7923 + - items: + - const: adi,ad7927 + - const: adi,ad7928 reg: maxItems: 1 @@ -37,19 +44,24 @@ properties: description: | The regulator supply for ADC reference voltage. + adi,range-double: + description: Sets the analog input range from 0 to 2xVREF. + type: boolean + '#address-cells': const: 1 '#size-cells': const: 0 - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/adc/adi,ad7949.yaml b/dts/Bindings/iio/adc/adi,ad7949.yaml index 0b10ed5f74..9ee4d977c5 100644 --- a/dts/Bindings/iio/adc/adi,ad7949.yaml +++ b/dts/Bindings/iio/adc/adi,ad7949.yaml @@ -49,8 +49,6 @@ properties: default: 4096000 - spi-max-frequency: true - '#io-channel-cells': const: 1 @@ -64,7 +62,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/adc/adi,ad799x.yaml b/dts/Bindings/iio/adc/adi,ad799x.yaml index 29641ce717..433ed2c929 100644 --- a/dts/Bindings/iio/adc/adi,ad799x.yaml +++ b/dts/Bindings/iio/adc/adi,ad799x.yaml @@ -57,17 +57,17 @@ additionalProperties: false examples: - | i2c { - #address-cells = <1>; - #size-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; - adc1: adc@28 { - reg = <0x28>; - compatible = "adi,ad7991"; - interrupts = <13 2>; - interrupt-parent = <&gpio6>; + adc1: adc@28 { + reg = <0x28>; + compatible = "adi,ad7991"; + interrupts = <13 2>; + interrupt-parent = <&gpio6>; - vcc-supply = <&vcc_3v3>; - vref-supply = <&adc_vref>; + vcc-supply = <&vcc_3v3>; + vref-supply = <&adc_vref>; }; }; ... diff --git a/dts/Bindings/iio/adc/adi,ad9467.yaml b/dts/Bindings/iio/adc/adi,ad9467.yaml index 2d72ff6bcb..eecd5fbab6 100644 --- a/dts/Bindings/iio/adc/adi,ad9467.yaml +++ b/dts/Bindings/iio/adc/adi,ad9467.yaml @@ -44,6 +44,9 @@ properties: Pin that controls the powerdown mode of the device. maxItems: 1 + io-backends: + maxItems: 1 + reset-gpios: description: Reset pin for the device. @@ -64,10 +67,11 @@ examples: #size-cells = <0>; adc@0 { - compatible = "adi,ad9467"; - reg = <0>; - clocks = <&adc_clk>; - clock-names = "adc-clk"; + compatible = "adi,ad9467"; + reg = <0>; + clocks = <&adc_clk>; + clock-names = "adc-clk"; + io-backends = <&iio_backend>; }; }; ... diff --git a/dts/Bindings/iio/adc/adi,axi-adc.yaml b/dts/Bindings/iio/adc/adi,axi-adc.yaml index 8e25773d69..3d49d21ad3 100644 --- a/dts/Bindings/iio/adc/adi,axi-adc.yaml +++ b/dts/Bindings/iio/adc/adi,axi-adc.yaml @@ -39,23 +39,25 @@ properties: $ref: /schemas/types.yaml#/definitions/phandle description: A reference to a the actual ADC to which this FPGA ADC interfaces to. + deprecated: true + + '#io-backend-cells': + const: 0 required: - compatible - dmas - reg - - adi,adc-dev additionalProperties: false examples: - | axi-adc@44a00000 { - compatible = "adi,axi-adc-10.0.a"; - reg = <0x44a00000 0x10000>; - dmas = <&rx_dma 0>; - dma-names = "rx"; - - adi,adc-dev = <&spi_adc>; + compatible = "adi,axi-adc-10.0.a"; + reg = <0x44a00000 0x10000>; + dmas = <&rx_dma 0>; + dma-names = "rx"; + #io-backend-cells = <0>; }; ... diff --git a/dts/Bindings/iio/adc/adi,max11410.yaml b/dts/Bindings/iio/adc/adi,max11410.yaml new file mode 100644 index 0000000000..53f9feff13 --- /dev/null +++ b/dts/Bindings/iio/adc/adi,max11410.yaml @@ -0,0 +1,177 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2022 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/adi,max11410.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices MAX11410 ADC device driver + +maintainers: + - Ibrahim Tilki <Ibrahim.Tilki@analog.com> + +description: | + Bindings for the Analog Devices MAX11410 ADC device. Datasheet can be + found here: + https://datasheets.maximintegrated.com/en/ds/MAX11410.pdf + +properties: + compatible: + enum: + - adi,max11410 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + description: Name of the gpio pin of max11410 used for IRQ + minItems: 1 + items: + - enum: [gpio0, gpio1] + - const: gpio1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + + avdd-supply: + description: Optional avdd supply. Used as reference when no explicit reference supplied. + + vref0p-supply: + description: vref0p supply can be used as reference for conversion. + + vref1p-supply: + description: vref1p supply can be used as reference for conversion. + + vref2p-supply: + description: vref2p supply can be used as reference for conversion. + + vref0n-supply: + description: vref0n supply can be used as reference for conversion. + + vref1n-supply: + description: vref1n supply can be used as reference for conversion. + + vref2n-supply: + description: vref2n supply can be used as reference for conversion. + + spi-max-frequency: + maximum: 8000000 + +patternProperties: + "^channel(@[0-9])?$": + $ref: adc.yaml + type: object + description: Represents the external channels which are connected to the ADC. + + properties: + reg: + description: The channel number in single-ended mode. + minimum: 0 + maximum: 9 + + adi,reference: + description: | + Select the reference source to use when converting on + the specific channel. Valid values are: + 0: VREF0P/VREF0N + 1: VREF1P/VREF1N + 2: VREF2P/VREF2N + 3: AVDD/AGND + 4: VREF0P/AGND + 5: VREF1P/AGND + 6: VREF2P/AGND + If this field is left empty, AVDD/AGND is selected. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3, 4, 5, 6] + default: 3 + + adi,input-mode: + description: | + Select signal path of input channels. Valid values are: + 0: Buffered, low-power, unity-gain path (default) + 1: Bypass path + 2: PGA path + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + default: 0 + + diff-channels: true + + bipolar: true + + settling-time-us: true + + adi,buffered-vrefp: + description: Enable buffered mode for positive reference. + type: boolean + + adi,buffered-vrefn: + description: Enable buffered mode for negative reference. + type: boolean + + required: + - reg + + additionalProperties: false + +required: + - compatible + - reg + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + reg = <0>; + compatible = "adi,max11410"; + spi-max-frequency = <8000000>; + + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "gpio1"; + + avdd-supply = <&adc_avdd>; + + vref1p-supply = <&adc_vref1p>; + vref1n-supply = <&adc_vref1n>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + }; + + channel@1 { + reg = <1>; + diff-channels = <2 3>; + adi,reference = <1>; + bipolar; + settling-time-us = <100000>; + }; + + channel@2 { + reg = <2>; + diff-channels = <7 9>; + adi,reference = <5>; + adi,input-mode = <2>; + settling-time-us = <50000>; + }; + }; + }; diff --git a/dts/Bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml b/dts/Bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml new file mode 100644 index 0000000000..7ef46c90eb --- /dev/null +++ b/dts/Bindings/iio/adc/allwinner,sun20i-d1-gpadc.yaml @@ -0,0 +1,91 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/allwinner,sun20i-d1-gpadc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner D1 General Purpose ADC + +maintainers: + - Maksim Kiselev <bigunclemax@gmail.com> + +properties: + compatible: + enum: + - allwinner,sun20i-d1-gpadc + + "#io-channel-cells": + const: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + + resets: + maxItems: 1 + +patternProperties: + "^channel@[0-9a-f]+$": + $ref: adc.yaml + type: object + description: + Represents the internal channels of the ADC. + + properties: + reg: + items: + minimum: 0 + maximum: 15 + + required: + - reg + + unevaluatedProperties: false + +required: + - "#io-channel-cells" + - clocks + - compatible + - interrupts + - reg + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sun20i-d1-ccu.h> + #include <dt-bindings/reset/sun20i-d1-ccu.h> + #include <dt-bindings/interrupt-controller/irq.h> + + gpadc: adc@2009000 { + compatible = "allwinner,sun20i-d1-gpadc"; + reg = <0x2009000 0x400>; + clocks = <&ccu CLK_BUS_GPADC>; + resets = <&ccu RST_BUS_GPADC>; + interrupts = <73 IRQ_TYPE_LEVEL_HIGH>; + #io-channel-cells = <1>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + }; + + channel@1 { + reg = <1>; + }; + }; +... diff --git a/dts/Bindings/iio/adc/allwinner,sun8i-a33-ths.yaml b/dts/Bindings/iio/adc/allwinner,sun8i-a33-ths.yaml index 15c514b835..a73a355fc6 100644 --- a/dts/Bindings/iio/adc/allwinner,sun8i-a33-ths.yaml +++ b/dts/Bindings/iio/adc/allwinner,sun8i-a33-ths.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/iio/adc/allwinner,sun8i-a33-ths.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A33 Thermal Sensor Device Tree Bindings +title: Allwinner A33 Thermal Sensor maintainers: - Chen-Yu Tsai <wens@csie.org> diff --git a/dts/Bindings/iio/adc/aspeed,ast2600-adc.yaml b/dts/Bindings/iio/adc/aspeed,ast2600-adc.yaml index b283c8ca2b..5c08d8b6e9 100644 --- a/dts/Bindings/iio/adc/aspeed,ast2600-adc.yaml +++ b/dts/Bindings/iio/adc/aspeed,ast2600-adc.yaml @@ -62,13 +62,6 @@ properties: description: Inform the driver that last channel will be used to sensor battery. - aspeed,trim-data-valid: - type: boolean - description: | - The ADC reference voltage can be calibrated to obtain the trimming - data which will be stored in otp. This property informs the driver that - the data store in the otp is valid. - required: - compatible - reg diff --git a/dts/Bindings/iio/adc/atmel,sama5d2-adc.yaml b/dts/Bindings/iio/adc/atmel,sama5d2-adc.yaml index 31f840d593..4817b84097 100644 --- a/dts/Bindings/iio/adc/atmel,sama5d2-adc.yaml +++ b/dts/Bindings/iio/adc/atmel,sama5d2-adc.yaml @@ -41,7 +41,7 @@ properties: description: Startup time expressed in ms, it depends on SoC. atmel,trigger-edge-type: - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 description: One of possible edge types for the ADTRG hardware trigger pin. When the specific edge type is detected, the conversion will diff --git a/dts/Bindings/iio/adc/atmel,sama9260-adc.yaml b/dts/Bindings/iio/adc/atmel,sama9260-adc.yaml index e6a1f915b5..1f30a85691 100644 --- a/dts/Bindings/iio/adc/atmel,sama9260-adc.yaml +++ b/dts/Bindings/iio/adc/atmel,sama9260-adc.yaml @@ -56,8 +56,8 @@ properties: String corresponding to an identifier from atmel,adc-res-names property. If not specified, the highest resolution will be used. enum: - - "lowres" - - "highres" + - lowres + - highres atmel,adc-sleep-mode: $ref: /schemas/types.yaml#/definitions/flag diff --git a/dts/Bindings/iio/adc/avia-hx711.yaml b/dts/Bindings/iio/adc/avia-hx711.yaml index 77605f1790..9c57eb13f8 100644 --- a/dts/Bindings/iio/adc/avia-hx711.yaml +++ b/dts/Bindings/iio/adc/avia-hx711.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- -$id: "http://devicetree.org/schemas/iio/adc/avia-hx711.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/iio/adc/avia-hx711.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: AVIA HX711 ADC chip for weight cells diff --git a/dts/Bindings/iio/adc/cirrus,ep9301-adc.yaml b/dts/Bindings/iio/adc/cirrus,ep9301-adc.yaml new file mode 100644 index 0000000000..6d4fb3e1d2 --- /dev/null +++ b/dts/Bindings/iio/adc/cirrus,ep9301-adc.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/cirrus,ep9301-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cirrus Logic EP930x internal ADC + +description: | + Cirrus Logic EP9301/EP9302 SoCs' internal ADC block. + + User's manual: + https://cdn.embeddedts.com/resource-attachments/ts-7000_ep9301-ug.pdf + +maintainers: + - Alexander Sverdlin <alexander.sverdlin@gmail.com> + +properties: + compatible: + const: cirrus,ep9301-adc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + maxItems: 1 + +required: + - compatible + - reg + - clocks + +additionalProperties: false + +examples: + - | + adc: adc@80900000 { + compatible = "cirrus,ep9301-adc"; + reg = <0x80900000 0x28>; + clocks = <&syscon 24>; + interrupt-parent = <&vic1>; + interrupts = <30>; + }; +... diff --git a/dts/Bindings/iio/adc/holt,hi8435.yaml b/dts/Bindings/iio/adc/holt,hi8435.yaml index 52490cbb0a..56bcbe5dcd 100644 --- a/dts/Bindings/iio/adc/holt,hi8435.yaml +++ b/dts/Bindings/iio/adc/holt,hi8435.yaml @@ -24,8 +24,6 @@ properties: GPIO used for controlling the reset pin maxItems: 1 - spi-max-frequency: true - "#io-channel-cells": const: 1 @@ -33,7 +31,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/adc/ingenic,adc.yaml b/dts/Bindings/iio/adc/ingenic,adc.yaml index 698beb896f..9cd0fd5397 100644 --- a/dts/Bindings/iio/adc/ingenic,adc.yaml +++ b/dts/Bindings/iio/adc/ingenic,adc.yaml @@ -2,10 +2,10 @@ # Copyright 2019-2020 Artur Rojek %YAML 1.2 --- -$id: "http://devicetree.org/schemas/iio/adc/ingenic,adc.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/iio/adc/ingenic,adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: Ingenic JZ47xx ADC controller IIO bindings +title: Ingenic JZ47xx ADC controller IIO maintainers: - Artur Rojek <contact@artur-rojek.eu> @@ -78,14 +78,14 @@ examples: #include <dt-bindings/iio/adc/ingenic,adc.h> adc@10070000 { - compatible = "ingenic,jz4740-adc"; - #io-channel-cells = <1>; + compatible = "ingenic,jz4740-adc"; + #io-channel-cells = <1>; - reg = <0x10070000 0x30>; + reg = <0x10070000 0x30>; - clocks = <&cgu JZ4740_CLK_ADC>; - clock-names = "adc"; + clocks = <&cgu JZ4740_CLK_ADC>; + clock-names = "adc"; - interrupt-parent = <&intc>; - interrupts = <18>; + interrupt-parent = <&intc>; + interrupts = <18>; }; diff --git a/dts/Bindings/iio/adc/lltc,ltc2496.yaml b/dts/Bindings/iio/adc/lltc,ltc2496.yaml index 0bd2fc0356..5207c919ab 100644 --- a/dts/Bindings/iio/adc/lltc,ltc2496.yaml +++ b/dts/Bindings/iio/adc/lltc,ltc2496.yaml @@ -22,15 +22,15 @@ properties: reg: maxItems: 1 - spi-max-frequency: - description: maximal spi bus frequency supported - required: - compatible - vref-supply - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/adc/lltc,ltc2497.yaml b/dts/Bindings/iio/adc/lltc,ltc2497.yaml index c1772b568c..5cc6a96840 100644 --- a/dts/Bindings/iio/adc/lltc,ltc2497.yaml +++ b/dts/Bindings/iio/adc/lltc,ltc2497.yaml @@ -4,19 +4,33 @@ $id: http://devicetree.org/schemas/iio/adc/lltc,ltc2497.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Linear Technology / Analog Devices LTC2497 ADC +title: Linear Technology / Analog Devices LTC2497 and LTC2309 ADC maintainers: - Michael Hennerich <michael.hennerich@analog.com> + - Liam Beguin <liambeguin@gmail.com> description: | - 16bit ADC supporting up to 16 single ended or 8 differential inputs. - I2C interface. + LTC2309: + low noise, low power, 8-channel, 12-bit successive approximation ADC with an + I2C compatible serial interface. + + https://www.analog.com/media/en/technical-documentation/data-sheets/2309fd.pdf + + LTC2497: + LTC2499: + 16bit ADC supporting up to 16 single ended or 8 differential inputs. + I2C interface. + + https://www.analog.com/media/en/technical-documentation/data-sheets/2497fb.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/2499fe.pdf properties: compatible: - const: - lltc,ltc2497 + enum: + - lltc,ltc2309 + - lltc,ltc2497 + - lltc,ltc2499 reg: true vref-supply: true diff --git a/dts/Bindings/iio/adc/maxim,max1027.yaml b/dts/Bindings/iio/adc/maxim,max1027.yaml index 46b7747076..e4b3621135 100644 --- a/dts/Bindings/iio/adc/maxim,max1027.yaml +++ b/dts/Bindings/iio/adc/maxim,max1027.yaml @@ -45,14 +45,17 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | #include <dt-bindings/interrupt-controller/irq.h> spi { - #address-cells = <1>; - #size-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; maxadc: adc@0 { compatible = "maxim,max1027"; reg = <0>; diff --git a/dts/Bindings/iio/adc/maxim,max11100.yaml b/dts/Bindings/iio/adc/maxim,max11100.yaml index 0cf87556ef..4f74cb3338 100644 --- a/dts/Bindings/iio/adc/maxim,max11100.yaml +++ b/dts/Bindings/iio/adc/maxim,max11100.yaml @@ -26,13 +26,16 @@ properties: minimum: 100000 maximum: 4800000 -additionalProperties: false - required: - compatible - reg - vref-supply +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/dts/Bindings/iio/adc/maxim,max1118.yaml b/dts/Bindings/iio/adc/maxim,max1118.yaml index e948b3e37b..bb336e33eb 100644 --- a/dts/Bindings/iio/adc/maxim,max1118.yaml +++ b/dts/Bindings/iio/adc/maxim,max1118.yaml @@ -28,23 +28,25 @@ properties: vref-supply: description: External reference, needed to establish input scaling -if: - properties: - compatible: - contains: - const: maxim,max1118 -then: - required: - - vref-supply -else: - properties: - vref-supply: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + - if: + properties: + compatible: + contains: + const: maxim,max1118 + then: + required: + - vref-supply + else: + properties: + vref-supply: false required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/adc/maxim,max11205.yaml b/dts/Bindings/iio/adc/maxim,max11205.yaml new file mode 100644 index 0000000000..5f9e043cf5 --- /dev/null +++ b/dts/Bindings/iio/adc/maxim,max11205.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/maxim,max11205.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX11205 ADC + +maintainers: + - Ramona Bolboaca <ramona.bolboaca@analog.com> + +description: | + The MAX11205 is an ultra-low-power (< 300FA max active current), + high-resolution, serial-output ADC. + + https://datasheets.maximintegrated.com/en/ds/MAX11205.pdf + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - maxim,max11205a + - maxim,max11205b + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + spi-max-frequency: + maximum: 5000000 + + spi-cpha: true + + vref-supply: + description: + The regulator supply for the ADC reference voltage. This is a differential + reference. It is equal to the V_REFP - V_REFN. The maximum value is 3.6V. + +required: + - compatible + - reg + - interrupts + - spi-max-frequency + - spi-cpha + - vref-supply + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + adc@0 { + compatible = "maxim,max11205a"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpha; + interrupt-parent = <&gpio>; + interrupts = <19 IRQ_TYPE_EDGE_FALLING>; + vref-supply = <&max11205_vref>; + }; + }; +... diff --git a/dts/Bindings/iio/adc/maxim,max1238.yaml b/dts/Bindings/iio/adc/maxim,max1238.yaml index 50bcd72ac9..60d7b34e32 100644 --- a/dts/Bindings/iio/adc/maxim,max1238.yaml +++ b/dts/Bindings/iio/adc/maxim,max1238.yaml @@ -10,7 +10,7 @@ maintainers: - Jonathan Cameron <jic23@kernel.org> description: | - Family of simple ADCs with i2c inteface and internal references. + Family of simple ADCs with i2c interface and internal references. properties: compatible: diff --git a/dts/Bindings/iio/adc/maxim,max1241.yaml b/dts/Bindings/iio/adc/maxim,max1241.yaml index 4c7e0d94bf..ef8d51e74c 100644 --- a/dts/Bindings/iio/adc/maxim,max1241.yaml +++ b/dts/Bindings/iio/adc/maxim,max1241.yaml @@ -39,22 +39,23 @@ properties: thus enabling power-down mode. maxItems: 1 - spi-max-frequency: true - required: - compatible - reg - vdd-supply - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> spi { - #address-cells = <1>; - #size-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; adc@0 { compatible = "maxim,max1241"; diff --git a/dts/Bindings/iio/adc/maxim,max1363.yaml b/dts/Bindings/iio/adc/maxim,max1363.yaml index e04f09f356..96f3f535fe 100644 --- a/dts/Bindings/iio/adc/maxim,max1363.yaml +++ b/dts/Bindings/iio/adc/maxim,max1363.yaml @@ -10,7 +10,7 @@ maintainers: - Jonathan Cameron <jic23@kernel.org> description: | - Family of ADCs with i2c inteface, internal references and threshold + Family of ADCs with i2c interface, internal references and threshold monitoring. properties: diff --git a/dts/Bindings/iio/adc/maxim,max34408.yaml b/dts/Bindings/iio/adc/maxim,max34408.yaml new file mode 100644 index 0000000000..4cba856e8d --- /dev/null +++ b/dts/Bindings/iio/adc/maxim,max34408.yaml @@ -0,0 +1,139 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/maxim,max34408.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX34408/MAX34409 current monitors with overcurrent control + +maintainers: + - Ivan Mikhaylov <fr0st61te@gmail.com> + +description: | + The MAX34408/MAX34409 are two- and four-channel current monitors that are + configured and monitored with a standard I2C/SMBus serial interface. Each + unidirectional current sensor offers precision high-side operation with a + low full-scale sense voltage. The devices automatically sequence through + two or four channels and collect the current-sense samples and average them + to reduce the effect of impulse noise. The raw ADC samples are compared to + user-programmable digital thresholds to indicate overcurrent conditions. + Overcurrent conditions trigger a hardware output to provide an immediate + indication to shut down any necessary external circuitry. + + Specifications about the devices can be found at: + https://www.analog.com/media/en/technical-documentation/data-sheets/MAX34408-MAX34409.pdf + +properties: + compatible: + enum: + - maxim,max34408 + - maxim,max34409 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + powerdown-gpios: + description: + Shutdown Output. Open-drain output. This output transitions to high impedance + when any of the digital comparator thresholds are exceeded as long as the ENA + pin is high. + maxItems: 1 + + powerdown-status-gpios: + description: + SHTDN Enable Input. CMOS digital input. Connect to GND to clear the latch and + unconditionally deassert (force low) the SHTDN output and reset the shutdown + delay. Connect to VDD to enable normal latch operation of the SHTDN output. + maxItems: 1 + + vdd-supply: true + +patternProperties: + "^channel@[0-3]$": + $ref: adc.yaml + type: object + description: + Represents the internal channels of the ADC. + + properties: + reg: + items: + - minimum: 0 + maximum: 3 + + maxim,rsense-val-micro-ohms: + description: + Adjust the Rsense value to monitor higher or lower current levels for + input. + enum: [250, 500, 1000, 5000, 10000, 50000, 100000, 200000, 500000] + default: 1000 + + required: + - reg + - maxim,rsense-val-micro-ohms + + unevaluatedProperties: false + +required: + - compatible + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: maxim,max34408 + then: + patternProperties: + "^channel@[2-3]$": false + "^channel@[0-1]$": + properties: + reg: + maximum: 1 + else: + patternProperties: + "^channel@[0-3]$": + properties: + reg: + maximum: 3 + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + adc@1e { + compatible = "maxim,max34409"; + reg = <0x1e>; + powerdown-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + powerdown-status-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0x0>; + maxim,rsense-val-micro-ohms = <5000>; + }; + + channel@1 { + reg = <0x1>; + maxim,rsense-val-micro-ohms = <10000>; + }; + }; + }; diff --git a/dts/Bindings/iio/adc/mediatek,mt2701-auxadc.yaml b/dts/Bindings/iio/adc/mediatek,mt2701-auxadc.yaml index 7f79a06e76..6168b44ea7 100644 --- a/dts/Bindings/iio/adc/mediatek,mt2701-auxadc.yaml +++ b/dts/Bindings/iio/adc/mediatek,mt2701-auxadc.yaml @@ -26,6 +26,7 @@ properties: - mediatek,mt2712-auxadc - mediatek,mt6765-auxadc - mediatek,mt7622-auxadc + - mediatek,mt7986-auxadc - mediatek,mt8173-auxadc - items: - enum: diff --git a/dts/Bindings/iio/adc/microchip,mcp3201.yaml b/dts/Bindings/iio/adc/microchip,mcp3201.yaml index fcc1ba53b2..18108f0f37 100644 --- a/dts/Bindings/iio/adc/microchip,mcp3201.yaml +++ b/dts/Bindings/iio/adc/microchip,mcp3201.yaml @@ -32,7 +32,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true spi-cpha: true spi-cpol: true @@ -51,7 +50,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/adc/microchip,mcp3564.yaml b/dts/Bindings/iio/adc/microchip,mcp3564.yaml new file mode 100644 index 0000000000..6753192761 --- /dev/null +++ b/dts/Bindings/iio/adc/microchip,mcp3564.yaml @@ -0,0 +1,205 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/microchip,mcp3564.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip MCP346X and MCP356X ADC Family + +maintainers: + - Marius Cristea <marius.cristea@microchip.com> + +description: | + Bindings for the Microchip family of 153.6 ksps, Low-Noise 16/24-Bit + Delta-Sigma ADCs with an SPI interface. Datasheet can be found here: + Datasheet for MCP3561, MCP3562, MCP3564 can be found here: + https://ww1.microchip.com/downloads/aemDocuments/documents/MSLD/ProductDocuments/DataSheets/MCP3561-2-4-Family-Data-Sheet-DS20006181C.pdf + Datasheet for MCP3561R, MCP3562R, MCP3564R can be found here: + https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3561_2_4R-Data-Sheet-DS200006391C.pdf + Datasheet for MCP3461, MCP3462, MCP3464 can be found here: + https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3461-2-4-Two-Four-Eight-Channel-153.6-ksps-Low-Noise-16-Bit-Delta-Sigma-ADC-Data-Sheet-20006180D.pdf + Datasheet for MCP3461R, MCP3462R, MCP3464R can be found here: + https://ww1.microchip.com/downloads/aemDocuments/documents/APID/ProductDocuments/DataSheets/MCP3461-2-4R-Family-Data-Sheet-DS20006404C.pdf + +properties: + compatible: + enum: + - microchip,mcp3461 + - microchip,mcp3462 + - microchip,mcp3464 + - microchip,mcp3461r + - microchip,mcp3462r + - microchip,mcp3464r + - microchip,mcp3561 + - microchip,mcp3562 + - microchip,mcp3564 + - microchip,mcp3561r + - microchip,mcp3562r + - microchip,mcp3564r + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 20000000 + + spi-cpha: true + + spi-cpol: true + + vdd-supply: true + + avdd-supply: true + + clocks: + description: + Phandle and clock identifier for external sampling clock. + If not specified, the internal crystal oscillator will be used. + maxItems: 1 + + interrupts: + description: IRQ line of the ADC + maxItems: 1 + + drive-open-drain: + description: + Whether to drive the IRQ signal as push-pull (default) or open-drain. Note + that the device requires this pin to become "high", otherwise it will stop + converting. + type: boolean + + vref-supply: + description: + Some devices have a specific reference voltage supplied on a different + pin to the other supplies. Needed to be able to establish channel scaling + unless there is also an internal reference available (e.g. mcp3564r). In + case of "r" devices (e. g. mcp3564r), if it does not exists the internal + reference will be used. + + microchip,hw-device-address: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + description: + The address is set on a per-device basis by fuses in the factory, + configured on request. If not requested, the fuses are set for 0x1. + The device address is part of the device markings to avoid + potential confusion. This address is coded on two bits, so four possible + addresses are available when multiple devices are present on the same + SPI bus with only one Chip Select line for all devices. + Each device communication starts by a CS falling edge, followed by the + clocking of the device address (BITS[7:6] - top two bits of COMMAND BYTE + which is first one on the wire). + + "#io-channel-cells": + const: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "^channel@([0-9]|([1-7][0-9]))$": + $ref: adc.yaml + type: object + unevaluatedProperties: false + description: Represents the external channels which are connected to the ADC. + + properties: + reg: + description: The channel number in single-ended and differential mode. + minimum: 0 + maximum: 79 + + required: + - reg + +dependencies: + spi-cpol: [ spi-cpha ] + spi-cpha: [ spi-cpol ] + +required: + - compatible + - reg + - microchip,hw-device-address + - spi-max-frequency + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + - # External vref, no internal reference + if: + properties: + compatible: + contains: + enum: + - microchip,mcp3461 + - microchip,mcp3462 + - microchip,mcp3464 + - microchip,mcp3561 + - microchip,mcp3562 + - microchip,mcp3564 + then: + required: + - vref-supply + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "microchip,mcp3564r"; + reg = <0>; + vref-supply = <&vref_reg>; + spi-cpha; + spi-cpol; + spi-max-frequency = <10000000>; + microchip,hw-device-address = <1>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + /* CH0 to AGND */ + reg = <0>; + label = "CH0"; + }; + + channel@1 { + /* CH1 to AGND */ + reg = <1>; + label = "CH1"; + }; + + /* diff-channels */ + channel@11 { + reg = <11>; + + /* CN0, CN1 */ + diff-channels = <0 1>; + label = "CH0_CH1"; + }; + + channel@22 { + reg = <0x22>; + + /* CN1, CN2 */ + diff-channels = <1 2>; + label = "CH1_CH3"; + }; + + channel@23 { + reg = <0x23>; + + /* CN1, CN3 */ + diff-channels = <1 3>; + label = "CH1_CH3"; + }; + }; + }; +... diff --git a/dts/Bindings/iio/adc/microchip,mcp3911.yaml b/dts/Bindings/iio/adc/microchip,mcp3911.yaml index 95ab285f4e..06951ec5f5 100644 --- a/dts/Bindings/iio/adc/microchip,mcp3911.yaml +++ b/dts/Bindings/iio/adc/microchip,mcp3911.yaml @@ -2,8 +2,8 @@ # Copyright 2019 Marcus Folkesson <marcus.folkesson@gmail.com> %YAML 1.2 --- -$id: "http://devicetree.org/schemas/iio/adc/microchip,mcp3911.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/iio/adc/microchip,mcp3911.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Microchip MCP3911 Dual channel analog front end (ADC) @@ -18,7 +18,13 @@ description: | properties: compatible: enum: + - microchip,mcp3910 - microchip,mcp3911 + - microchip,mcp3912 + - microchip,mcp3913 + - microchip,mcp3914 + - microchip,mcp3918 + - microchip,mcp3919 reg: maxItems: 1 @@ -36,6 +42,13 @@ properties: description: IRQ line of the ADC maxItems: 1 + microchip,data-ready-hiz: + description: + Data Ready Pin Inactive State Control + true = The DR pin state is high-impedance + false = The DR pin state is logic high + type: boolean + microchip,device-addr: description: Device address when multiple MCP3911 chips are present on the same SPI bus. $ref: /schemas/types.yaml#/definitions/uint32 @@ -51,7 +64,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/adc/microchip,pac1934.yaml b/dts/Bindings/iio/adc/microchip,pac1934.yaml new file mode 100644 index 0000000000..47a11a9ac9 --- /dev/null +++ b/dts/Bindings/iio/adc/microchip,pac1934.yaml @@ -0,0 +1,120 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/microchip,pac1934.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip PAC1934 Power Monitors with Accumulator + +maintainers: + - Marius Cristea <marius.cristea@microchip.com> + +description: | + This device is part of the Microchip family of Power Monitors with + Accumulator. + The datasheet for PAC1931, PAC1932, PAC1933 and PAC1934 can be found here: + https://ww1.microchip.com/downloads/aemDocuments/documents/OTH/ProductDocuments/DataSheets/PAC1931-Family-Data-Sheet-DS20005850E.pdf + +properties: + compatible: + enum: + - microchip,pac1931 + - microchip,pac1932 + - microchip,pac1933 + - microchip,pac1934 + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + interrupts: + maxItems: 1 + + slow-io-gpios: + description: + A GPIO used to trigger a change is sampling rate (lowering the chip power + consumption). If configured in SLOW mode, if this pin is forced high, + sampling rate is forced to eight samples/second. When it is forced low, + the sampling rate is 1024 samples/second unless a different sample rate + has been programmed. + +patternProperties: + "^channel@[1-4]+$": + type: object + $ref: adc.yaml + description: + Represents the external channels which are connected to the ADC. + + properties: + reg: + items: + minimum: 1 + maximum: 4 + + shunt-resistor-micro-ohms: + description: + Value in micro Ohms of the shunt resistor connected between + the SENSE+ and SENSE- inputs, across which the current is measured. + Value is needed to compute the scaling of the measured current. + + required: + - reg + - shunt-resistor-micro-ohms + + unevaluatedProperties: false + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + power-monitor@10 { + compatible = "microchip,pac1934"; + reg = <0x10>; + + #address-cells = <1>; + #size-cells = <0>; + + channel@1 { + reg = <0x1>; + shunt-resistor-micro-ohms = <24900000>; + label = "CPU"; + }; + + channel@2 { + reg = <0x2>; + shunt-resistor-micro-ohms = <49900000>; + label = "GPU"; + }; + + channel@3 { + reg = <0x3>; + shunt-resistor-micro-ohms = <75000000>; + label = "MEM"; + bipolar; + }; + + channel@4 { + reg = <0x4>; + shunt-resistor-micro-ohms = <100000000>; + label = "NET"; + bipolar; + }; + }; + }; + +... diff --git a/dts/Bindings/iio/adc/motorola,cpcap-adc.yaml b/dts/Bindings/iio/adc/motorola,cpcap-adc.yaml index a6cb857a23..9ceb6f18c8 100644 --- a/dts/Bindings/iio/adc/motorola,cpcap-adc.yaml +++ b/dts/Bindings/iio/adc/motorola,cpcap-adc.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/iio/adc/motorola,cpcap-adc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Motorola CPCAP PMIC ADC binding +title: Motorola CPCAP PMIC ADC maintainers: - Tony Lindgren <tony@atomide.com> diff --git a/dts/Bindings/iio/adc/nxp,imx8qxp-adc.yaml b/dts/Bindings/iio/adc/nxp,imx8qxp-adc.yaml index 9c59a20a60..0a192ca192 100644 --- a/dts/Bindings/iio/adc/nxp,imx8qxp-adc.yaml +++ b/dts/Bindings/iio/adc/nxp,imx8qxp-adc.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/iio/adc/nxp,imx8qxp-adc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: NXP IMX8QXP ADC bindings +title: NXP IMX8QXP ADC maintainers: - Cai Huoqing <caihuoqing@baidu.com> @@ -39,6 +39,12 @@ properties: power-domains: maxItems: 1 + vref-supply: + description: | + External ADC reference voltage supply on VREFH pad. If VERID[MVI] is + set, there are additional, internal reference voltages selectable. + VREFH1 is always from VREFH pad. + "#io-channel-cells": const: 1 @@ -72,6 +78,7 @@ examples: assigned-clocks = <&clk IMX_SC_R_ADC_0>; assigned-clock-rates = <24000000>; power-domains = <&pd IMX_SC_R_ADC_0>; + vref-supply = <®_1v8>; #io-channel-cells = <1>; }; }; diff --git a/dts/Bindings/iio/adc/nxp,imx93-adc.yaml b/dts/Bindings/iio/adc/nxp,imx93-adc.yaml new file mode 100644 index 0000000000..dfc3f51291 --- /dev/null +++ b/dts/Bindings/iio/adc/nxp,imx93-adc.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/nxp,imx93-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP iMX93 ADC + +maintainers: + - Haibo Chen <haibo.chen@nxp.com> + +description: + The ADC on iMX93 is a 8-channel 12-bit 1MS/s ADC with 4 channels + connected to pins. it support normal and inject mode, include + One-Shot and Scan (continuous) conversions. Programmable DMA + enables for each channel Also this ADC contain alternate analog + watchdog thresholds, select threshold through input ports. And + also has Self-test logic and Software-initiated calibration. + +properties: + compatible: + const: nxp,imx93-adc + + reg: + maxItems: 1 + + interrupts: + items: + - description: WDGnL, watchdog threshold interrupt requests. + - description: WDGnH, watchdog threshold interrupt requests. + - description: normal conversion, include EOC (End of Conversion), + ECH (End of Chain), JEOC (End of Injected Conversion) and + JECH (End of injected Chain). + + clocks: + maxItems: 1 + + clock-names: + const: ipg + + vref-supply: + description: + The reference voltage which used to establish channel scaling. + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - vref-supply + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/clock/imx93-clock.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + soc { + #address-cells = <1>; + #size-cells = <1>; + adc@44530000 { + compatible = "nxp,imx93-adc"; + reg = <0x44530000 0x10000>; + interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk IMX93_CLK_ADC1_GATE>; + clock-names = "ipg"; + vref-supply = <®_vref_1v8>; + #io-channel-cells = <1>; + }; + }; +... diff --git a/dts/Bindings/iio/adc/nxp,lpc1850-adc.yaml b/dts/Bindings/iio/adc/nxp,lpc1850-adc.yaml index 43abb300fa..70b38038a0 100644 --- a/dts/Bindings/iio/adc/nxp,lpc1850-adc.yaml +++ b/dts/Bindings/iio/adc/nxp,lpc1850-adc.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/iio/adc/nxp,lpc1850-adc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: NXP LPC1850 ADC bindings +title: NXP LPC1850 ADC maintainers: - Jonathan Cameron <jic23@kernel.org> diff --git a/dts/Bindings/iio/adc/qcom,pm8018-adc.yaml b/dts/Bindings/iio/adc/qcom,pm8018-adc.yaml index d186b713d6..58ea1ca4a5 100644 --- a/dts/Bindings/iio/adc/qcom,pm8018-adc.yaml +++ b/dts/Bindings/iio/adc/qcom,pm8018-adc.yaml @@ -160,7 +160,7 @@ examples: }; ref_muxoff: adc-channel@f { reg = <0x00 0x0f>; - }; + }; }; }; ... diff --git a/dts/Bindings/iio/adc/qcom,spmi-iadc.yaml b/dts/Bindings/iio/adc/qcom,spmi-iadc.yaml index 2a94db6888..5ed893ef5c 100644 --- a/dts/Bindings/iio/adc/qcom,spmi-iadc.yaml +++ b/dts/Bindings/iio/adc/qcom,spmi-iadc.yaml @@ -18,10 +18,14 @@ description: | properties: compatible: - const: qcom,spmi-iadc + items: + - enum: + - qcom,pm8226-iadc + - qcom,pm8941-iadc + - const: qcom,spmi-iadc reg: - description: IADC base address and length in the SPMI PMIC register map + description: IADC base address in the SPMI PMIC register map maxItems: 1 qcom,external-resistor-micro-ohms: @@ -46,15 +50,17 @@ additionalProperties: false examples: - | #include <dt-bindings/interrupt-controller/irq.h> - spmi_bus { + + pmic { #address-cells = <1>; #size-cells = <0>; - pmic_iadc: adc@3600 { - compatible = "qcom,spmi-iadc"; + + adc@3600 { + compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc"; reg = <0x3600>; interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>; qcom,external-resistor-micro-ohms = <10000>; - #io-channel-cells = <1>; + #io-channel-cells = <1>; }; }; ... diff --git a/dts/Bindings/iio/adc/qcom,spmi-rradc.yaml b/dts/Bindings/iio/adc/qcom,spmi-rradc.yaml index c8cbfd3444..f39bc92c2b 100644 --- a/dts/Bindings/iio/adc/qcom,spmi-rradc.yaml +++ b/dts/Bindings/iio/adc/qcom,spmi-rradc.yaml @@ -40,12 +40,12 @@ additionalProperties: false examples: - | pmic { - #address-cells = <1>; - #size-cells = <0>; - - pmic_rradc: adc@4500 { - compatible = "qcom,pmi8998-rradc"; - reg = <0x4500>; - #io-channel-cells = <1>; - }; + #address-cells = <1>; + #size-cells = <0>; + + adc@4500 { + compatible = "qcom,pmi8998-rradc"; + reg = <0x4500>; + #io-channel-cells = <1>; + }; }; diff --git a/dts/Bindings/iio/adc/qcom,spmi-vadc.yaml b/dts/Bindings/iio/adc/qcom,spmi-vadc.yaml index 74a4a9d957..c28db0d635 100644 --- a/dts/Bindings/iio/adc/qcom,spmi-vadc.yaml +++ b/dts/Bindings/iio/adc/qcom,spmi-vadc.yaml @@ -22,13 +22,11 @@ properties: - items: - const: qcom,pms405-adc - const: qcom,spmi-adc-rev2 - - - items: - - enum: - - qcom,spmi-vadc - - qcom,spmi-adc5 - - qcom,spmi-adc-rev2 - - qcom,spmi-adc7 + - enum: + - qcom,spmi-vadc + - qcom,spmi-adc5 + - qcom,spmi-adc-rev2 + - qcom,spmi-adc7 reg: description: VADC base address in the SPMI PMIC register map @@ -56,8 +54,9 @@ required: - '#io-channel-cells' patternProperties: - "^.*@[0-9a-f]+$": + "^channel@[0-9a-f]+$": type: object + additionalProperties: false description: | Represents the external channels which are connected to the ADC. For compatible property "qcom,spmi-vadc" following channels, also known as @@ -76,7 +75,6 @@ patternProperties: in the PMIC-specific files in include/dt-bindings/iio/. label: - $ref: /schemas/types.yaml#/definitions/string description: | ADC input of the platform as seen in the schematics. For thermistor inputs connected to generic AMUX or GPIO inputs @@ -102,7 +100,7 @@ patternProperties: oneOf: - items: - const: 1 - - enum: [ 1, 3, 4, 6, 20, 8, 10 ] + - enum: [ 1, 3, 4, 6, 20, 8, 10, 16 ] - items: - const: 10 - const: 81 @@ -149,7 +147,7 @@ allOf: then: patternProperties: - "^.*@[0-9a-f]+$": + "^channel@[0-9a-f]+$": properties: qcom,decimation: enum: [ 512, 1024, 2048, 4096 ] @@ -172,7 +170,7 @@ allOf: then: patternProperties: - "^.*@[0-9a-f]+$": + "^channel@[0-9a-f]+$": properties: qcom,decimation: enum: [ 256, 512, 1024 ] @@ -195,7 +193,7 @@ allOf: then: patternProperties: - "^.*@[0-9a-f]+$": + "^channel@[0-9a-f]+$": properties: qcom,decimation: enum: [ 250, 420, 840 ] @@ -218,7 +216,7 @@ allOf: then: patternProperties: - "^.*@[0-9a-f]+$": + "^channel@[0-9a-f]+$": properties: qcom,decimation: enum: [ 85, 340, 1360 ] @@ -237,42 +235,75 @@ additionalProperties: false examples: - | - spmi_bus { - #address-cells = <1>; - #size-cells = <0>; - /* VADC node */ - pmic_vadc: adc@3100 { - compatible = "qcom,spmi-vadc"; - reg = <0x3100>; - interrupts = <0x0 0x31 0x0 0x1>; + pmic { #address-cells = <1>; #size-cells = <0>; - #io-channel-cells = <1>; - - /* Channel node */ - adc-chan@39 { - reg = <0x39>; - qcom,decimation = <512>; - qcom,ratiometric; - qcom,hw-settle-time = <200>; - qcom,avg-samples = <1>; - qcom,pre-scaling = <1 3>; - }; - adc-chan@9 { - reg = <0x9>; + adc@3100 { + compatible = "qcom,spmi-vadc"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 0x1>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + /* Channel node */ + channel@39 { + reg = <0x39>; + qcom,decimation = <512>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + qcom,avg-samples = <1>; + qcom,pre-scaling = <1 3>; + }; + + channel@9 { + reg = <0x9>; + }; + + channel@a { + reg = <0xa>; + }; + + channel@e { + reg = <0xe>; + }; + + channel@f { + reg = <0xf>; + }; }; + }; - adc-chan@a { - reg = <0xa>; - }; + - | + #include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h> + #include <dt-bindings/iio/qcom,spmi-adc7-pm8350.h> + #include <dt-bindings/interrupt-controller/irq.h> - adc-chan@e { - reg = <0xe>; - }; + pmic { + #address-cells = <1>; + #size-cells = <0>; - adc-chan@f { - reg = <0xf>; + adc@3100 { + reg = <0x3100>; + compatible = "qcom,spmi-adc7"; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + /* Other properties are omitted */ + channel@44 { + reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + label = "xo_therm"; + }; + + channel@47 { + reg = <PM8350_ADC7_AMUX_THM4_100K_PU(1)>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + label = "conn_therm"; + }; }; - }; }; diff --git a/dts/Bindings/iio/adc/renesas,rcar-gyroadc.yaml b/dts/Bindings/iio/adc/renesas,rcar-gyroadc.yaml index c115e2e99b..36dff3250e 100644 --- a/dts/Bindings/iio/adc/renesas,rcar-gyroadc.yaml +++ b/dts/Bindings/iio/adc/renesas,rcar-gyroadc.yaml @@ -34,9 +34,11 @@ properties: clock-names: const: fck - power-domains: true + power-domains: + maxItems: 1 - resets: true + resets: + maxItems: 1 "#address-cells": const: 1 @@ -51,6 +53,8 @@ required: - reg - clocks - clock-names + - power-domains + - resets - "#address-cells" - "#size-cells" @@ -86,7 +90,7 @@ patternProperties: of the MAX chips to the GyroADC, while MISO line of each Maxim ADC connects to a shared input pin of the GyroADC. enum: - - adi,7476 + - adi,ad7476 - fujitsu,mb88101a - maxim,max1162 - maxim,max11100 @@ -108,36 +112,30 @@ patternProperties: examples: - | - #include <dt-bindings/clock/r8a7791-clock.h> + #include <dt-bindings/clock/r8a7791-cpg-mssr.h> #include <dt-bindings/power/r8a7791-sysc.h> - soc { - #address-cells = <2>; - #size-cells = <2>; - - adc@e6e54000 { - compatible = "renesas,r8a7791-gyroadc", "renesas,rcar-gyroadc"; - reg = <0 0xe6e54000 0 64>; - clocks = <&mstp9_clks R8A7791_CLK_GYROADC>; - clock-names = "fck"; - power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; - - pinctrl-0 = <&adc_pins>; - pinctrl-names = "default"; - - #address-cells = <1>; - #size-cells = <0>; - - adc@0 { - reg = <0>; - compatible = "maxim,max1162"; - vref-supply = <&vref_max1162>; - }; - - adc@1 { - reg = <1>; - compatible = "maxim,max1162"; - vref-supply = <&vref_max1162>; - }; + + adc@e6e54000 { + compatible = "renesas,r8a7791-gyroadc", "renesas,rcar-gyroadc"; + reg = <0xe6e54000 64>; + clocks = <&cpg CPG_MOD 901>; + clock-names = "fck"; + power-domains = <&sysc R8A7791_PD_ALWAYS_ON>; + resets = <&cpg 901>; + + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + reg = <0>; + compatible = "maxim,max1162"; + vref-supply = <&vref_max1162>; + }; + + adc@1 { + reg = <1>; + compatible = "maxim,max1162"; + vref-supply = <&vref_max1162>; }; }; ... diff --git a/dts/Bindings/iio/adc/renesas,rzg2l-adc.yaml b/dts/Bindings/iio/adc/renesas,rzg2l-adc.yaml index 61c6157cf5..ba86c7b7d6 100644 --- a/dts/Bindings/iio/adc/renesas,rzg2l-adc.yaml +++ b/dts/Bindings/iio/adc/renesas,rzg2l-adc.yaml @@ -19,7 +19,7 @@ properties: compatible: items: - enum: - - renesas,r9a07g043-adc # RZ/G2UL + - renesas,r9a07g043-adc # RZ/G2UL and RZ/Five - renesas,r9a07g044-adc # RZ/G2L - renesas,r9a07g054-adc # RZ/V2L - const: renesas,rzg2l-adc @@ -69,7 +69,7 @@ required: patternProperties: "^channel@[0-7]$": - $ref: "adc.yaml" + $ref: adc.yaml type: object description: | Represents the external channels which are connected to the ADC. diff --git a/dts/Bindings/iio/adc/richtek,rtq6056.yaml b/dts/Bindings/iio/adc/richtek,rtq6056.yaml new file mode 100644 index 0000000000..af2c3a67f8 --- /dev/null +++ b/dts/Bindings/iio/adc/richtek,rtq6056.yaml @@ -0,0 +1,63 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/richtek,rtq6056.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RTQ6056 Bi-Directional Current and Power Monitor with 16-bit ADC + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + The RTQ6056 is a high accuracy current-sense monitor with I2C and SMBus + interface, and the device provides full information for system by reading + out the loading current and power. + + The device monitors both of the drops across sense resistor and the BUS + voltage, converts into the current in amperes, and power in watts through + internal analog-to-digital converter ADC. The programmable calibration, + adjustable conversion time, and averaging function are also built in for + more design flexibility. + + Datasheet is available at + https://www.richtek.com/assets/product_file/RTQ6056/DSQ6056-00.pdf + +properties: + compatible: + oneOf: + - enum: + - richtek,rtq6056 + - richtek,rtq6059 + - items: + - enum: + - richtek,rtq6053 + - const: richtek,rtq6056 + + reg: + maxItems: 1 + + "#io-channel-cells": + const: 1 + + shunt-resistor-micro-ohms: + description: Shunt IN+/IN- sensing node resistor + +required: + - compatible + - reg + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + adc@40 { + compatible = "richtek,rtq6056"; + reg = <0x40>; + #io-channel-cells = <1>; + }; + }; diff --git a/dts/Bindings/iio/adc/rockchip-saradc.yaml b/dts/Bindings/iio/adc/rockchip-saradc.yaml index e512a14e41..aa24b84139 100644 --- a/dts/Bindings/iio/adc/rockchip-saradc.yaml +++ b/dts/Bindings/iio/adc/rockchip-saradc.yaml @@ -15,6 +15,7 @@ properties: - const: rockchip,saradc - const: rockchip,rk3066-tsadc - const: rockchip,rk3399-saradc + - const: rockchip,rk3588-saradc - items: - enum: - rockchip,px30-saradc @@ -22,6 +23,7 @@ properties: - rockchip,rk3328-saradc - rockchip,rk3568-saradc - rockchip,rv1108-saradc + - rockchip,rv1126-saradc - const: rockchip,rk3399-saradc reg: diff --git a/dts/Bindings/iio/adc/samsung,exynos-adc.yaml b/dts/Bindings/iio/adc/samsung,exynos-adc.yaml index 81c8729591..4e40f6bed5 100644 --- a/dts/Bindings/iio/adc/samsung,exynos-adc.yaml +++ b/dts/Bindings/iio/adc/samsung,exynos-adc.yaml @@ -11,18 +11,23 @@ maintainers: properties: compatible: - enum: - - samsung,exynos-adc-v1 # Exynos5250 - - samsung,exynos-adc-v2 - - samsung,exynos3250-adc - - samsung,exynos4212-adc # Exynos4212 and Exynos4412 - - samsung,exynos7-adc - - samsung,s3c2410-adc - - samsung,s3c2416-adc - - samsung,s3c2440-adc - - samsung,s3c2443-adc - - samsung,s3c6410-adc - - samsung,s5pv210-adc + oneOf: + - enum: + - samsung,exynos-adc-v1 # Exynos5250 + - samsung,exynos-adc-v2 + - samsung,exynos3250-adc + - samsung,exynos4212-adc # Exynos4212 and Exynos4412 + - samsung,exynos7-adc + - samsung,s3c2410-adc + - samsung,s3c2416-adc + - samsung,s3c2440-adc + - samsung,s3c2443-adc + - samsung,s3c6410-adc + - samsung,s5pv210-adc + - items: + - enum: + - samsung,exynos5433-adc + - const: samsung,exynos7-adc reg: maxItems: 1 @@ -52,7 +57,7 @@ properties: vdd-supply: true samsung,syscon-phandle: - $ref: '/schemas/types.yaml#/definitions/phandle' + $ref: /schemas/types.yaml#/definitions/phandle description: Phandle to the PMU system controller node (to access the ADC_PHY register on Exynos3250/4x12/5250/5420/5800). @@ -142,7 +147,7 @@ examples: pullup-ohm = <47000>; pulldown-ohm = <0>; io-channels = <&adc 4>; - }; + }; }; - | @@ -150,7 +155,7 @@ examples: adc@126c0000 { compatible = "samsung,exynos3250-adc"; - reg = <0x126C0000 0x100>; + reg = <0x126c0000 0x100>; interrupts = <0 137 0>; #io-channel-cells = <1>; diff --git a/dts/Bindings/iio/adc/sigma-delta-modulator.yaml b/dts/Bindings/iio/adc/sigma-delta-modulator.yaml index 2287697f1f..cab0d425ea 100644 --- a/dts/Bindings/iio/adc/sigma-delta-modulator.yaml +++ b/dts/Bindings/iio/adc/sigma-delta-modulator.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/iio/adc/sigma-delta-modulator.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Device-Tree bindings for sigma delta modulator +title: Sigma delta modulator maintainers: - Arnaud Pouliquen <arnaud.pouliquen@foss.st.com> diff --git a/dts/Bindings/iio/adc/sprd,sc2720-adc.yaml b/dts/Bindings/iio/adc/sprd,sc2720-adc.yaml index 44aa28b591..8181cf9a8e 100644 --- a/dts/Bindings/iio/adc/sprd,sc2720-adc.yaml +++ b/dts/Bindings/iio/adc/sprd,sc2720-adc.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/iio/adc/sprd,sc2720-adc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Spreadtrum SC27XX series PMICs ADC binding +title: Spreadtrum SC27XX series PMICs ADC maintainers: - Baolin Wang <baolin.wang7@gmail.com> diff --git a/dts/Bindings/iio/adc/st,stm32-adc.yaml b/dts/Bindings/iio/adc/st,stm32-adc.yaml index fa8da42cb1..995cbf8cef 100644 --- a/dts/Bindings/iio/adc/st,stm32-adc.yaml +++ b/dts/Bindings/iio/adc/st,stm32-adc.yaml @@ -1,10 +1,10 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/iio/adc/st,stm32-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: STMicroelectronics STM32 ADC bindings +title: STMicroelectronics STM32 ADC description: | STM32 ADC is a successive approximation analog-to-digital converter. @@ -27,6 +27,7 @@ properties: - st,stm32f4-adc-core - st,stm32h7-adc-core - st,stm32mp1-adc-core + - st,stm32mp13-adc-core reg: maxItems: 1 @@ -37,6 +38,7 @@ properties: - stm32f4 and stm32h7 share a common ADC interrupt line. - stm32mp1 has two separate interrupt lines, one for each ADC within ADC block. + - stm32mp13 has an interrupt line per ADC block. minItems: 1 maxItems: 2 @@ -78,7 +80,7 @@ properties: description: Phandle to system configuration controller. It can be used to control the analog circuitry on stm32mp1. - $ref: "/schemas/types.yaml#/definitions/phandle-array" + $ref: /schemas/types.yaml#/definitions/phandle-array interrupt-controller: true @@ -180,6 +182,33 @@ allOf: maximum: 36000000 default: 36000000 + - if: + properties: + compatible: + contains: + const: st,stm32mp13-adc-core + + then: + properties: + clocks: + minItems: 1 + maxItems: 2 + + clock-names: + items: + - const: bus + - const: adc + minItems: 1 + + interrupts: + items: + - description: ADC interrupt line + + st,max-clk-rate-hz: + minimum: 150000 + maximum: 75000000 + default: 75000000 + additionalProperties: false required: @@ -208,6 +237,7 @@ patternProperties: - st,stm32f4-adc - st,stm32h7-adc - st,stm32mp1-adc + - st,stm32mp13-adc reg: description: | @@ -229,7 +259,7 @@ patternProperties: interrupts: description: | IRQ Line for the ADC instance. Valid values are: - - 0 for adc@0 + - 0 for adc@0 (single adc for stm32mp13) - 1 for adc@100 - 2 for adc@200 (stm32f4 only) maxItems: 1 @@ -250,13 +280,14 @@ patternProperties: assigned-resolution-bits: description: | Resolution (bits) to use for conversions: - - can be 6, 8, 10 or 12 on stm32f4 + - can be 6, 8, 10 or 12 on stm32f4 and stm32mp13 - can be 8, 10, 12, 14 or 16 on stm32h7 and stm32mp1 st,adc-channels: description: | List of single-ended channels muxed for this ADC. It can have up to: - 16 channels, numbered from 0 to 15 (for in0..in15) on stm32f4 + - 19 channels, numbered from 0 to 18 (for in0..in18) on stm32mp13. - 20 channels, numbered from 0 to 19 (for in0..in19) on stm32h7 and stm32mp1. $ref: /schemas/types.yaml#/definitions/uint32-array @@ -310,7 +341,7 @@ patternProperties: patternProperties: "^channel@([0-9]|1[0-9])$": type: object - $ref: "adc.yaml" + $ref: adc.yaml description: Represents the external channels which are connected to the ADC. properties: @@ -322,7 +353,7 @@ patternProperties: label: description: | Unique name to identify which channel this is. - Reserved label names "vddcore", "vrefint" and "vbat" + Reserved label names "vddcore", "vddcpu", "vddq_ddr", "vrefint" and "vbat" are used to identify internal channels with matching names. diff-channels: @@ -419,6 +450,37 @@ patternProperties: items: minimum: 40 + + - if: + properties: + compatible: + contains: + const: st,stm32mp13-adc + + then: + properties: + reg: + const: 0x0 + + interrupts: + const: 0 + + assigned-resolution-bits: + enum: [6, 8, 10, 12] + default: 12 + + st,adc-channels: + minItems: 1 + maxItems: 19 + items: + minimum: 0 + maximum: 18 + + st,min-sample-time-nsecs: + minItems: 1 + maxItems: 19 + items: + minimum: 40 additionalProperties: false required: diff --git a/dts/Bindings/iio/adc/st,stm32-dfsdm-adc.yaml b/dts/Bindings/iio/adc/st,stm32-dfsdm-adc.yaml index 92f9472a77..1970503389 100644 --- a/dts/Bindings/iio/adc/st,stm32-dfsdm-adc.yaml +++ b/dts/Bindings/iio/adc/st,stm32-dfsdm-adc.yaml @@ -72,6 +72,7 @@ additionalProperties: false patternProperties: "^filter@[0-9]+$": type: object + unevaluatedProperties: false description: child node properties: @@ -225,6 +226,7 @@ patternProperties: patternProperties: "^dfsdm-dai+$": type: object + additionalProperties: false description: child node properties: diff --git a/dts/Bindings/iio/adc/st,stmpe-adc.yaml b/dts/Bindings/iio/adc/st,stmpe-adc.yaml index 9049c69915..474e35c493 100644 --- a/dts/Bindings/iio/adc/st,stmpe-adc.yaml +++ b/dts/Bindings/iio/adc/st,stmpe-adc.yaml @@ -13,8 +13,7 @@ description: This ADC forms part of an ST microelectronics STMPE multifunction device . The ADC is shared with the STMPE touchscreen. As a result some ADC related settings are specified in the parent node. - The node name myst be stmpe_adc and should be a child node of the stmpe node - to which it belongs. + The node should be a child node of the stmpe node to which it belongs. properties: compatible: @@ -36,10 +35,8 @@ additionalProperties: false examples: - | - stmpe { - stmpe_adc { - compatible = "st,stmpe-adc"; - st,norequest-mask = <0x0F>; /* dont use ADC CH3-0 */ - }; + adc { + compatible = "st,stmpe-adc"; + st,norequest-mask = <0x0f>; /* dont use ADC CH3-0 */ }; ... diff --git a/dts/Bindings/iio/adc/ti,adc081c.yaml b/dts/Bindings/iio/adc/ti,adc081c.yaml new file mode 100644 index 0000000000..caaad77758 --- /dev/null +++ b/dts/Bindings/iio/adc/ti,adc081c.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,adc081c.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI Single-channel I2C ADCs + +maintainers: + - Jonathan Cameron <jic23@kernel.org> + - Lars-Peter Clausen <lars@metafoo.de> + +description: | + Single-channel ADC supporting 8, 10, or 12-bit samples and high/low alerts. + +properties: + compatible: + enum: + - ti,adc081c + - ti,adc101c + - ti,adc121c + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vref-supply: + description: + Regulator for the combined power supply and voltage reference + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - vref-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + adc@52 { + compatible = "ti,adc081c"; + reg = <0x52>; + vref-supply = <®_2p5v>; + }; + }; +... diff --git a/dts/Bindings/iio/adc/ti,adc0832.yaml b/dts/Bindings/iio/adc/ti,adc0832.yaml index f5a923cc84..686721176a 100644 --- a/dts/Bindings/iio/adc/ti,adc0832.yaml +++ b/dts/Bindings/iio/adc/ti,adc0832.yaml @@ -24,8 +24,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: description: External reference, needed to establish input scaling @@ -37,7 +35,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/adc/ti,adc084s021.yaml b/dts/Bindings/iio/adc/ti,adc084s021.yaml index 1a113b30a4..726d2cbfa3 100644 --- a/dts/Bindings/iio/adc/ti,adc084s021.yaml +++ b/dts/Bindings/iio/adc/ti,adc084s021.yaml @@ -19,8 +19,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: description: External reference, needed to establish input scaling @@ -37,7 +35,10 @@ required: - spi-cpol - spi-cpha -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/adc/ti,adc108s102.yaml b/dts/Bindings/iio/adc/ti,adc108s102.yaml index ae5ce60987..a60b1e100e 100644 --- a/dts/Bindings/iio/adc/ti,adc108s102.yaml +++ b/dts/Bindings/iio/adc/ti,adc108s102.yaml @@ -19,7 +19,6 @@ properties: reg: true vref-supply: true - spi-max-frequency: true "#io-channel-cells": const: 1 @@ -28,12 +27,15 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | spi { - #address-cells= <1>; + #address-cells = <1>; #size-cells = <0>; adc@0 { diff --git a/dts/Bindings/iio/adc/ti,adc12138.yaml b/dts/Bindings/iio/adc/ti,adc12138.yaml index ec3b2edf1f..076088a328 100644 --- a/dts/Bindings/iio/adc/ti,adc12138.yaml +++ b/dts/Bindings/iio/adc/ti,adc12138.yaml @@ -31,8 +31,6 @@ properties: maxItems: 1 description: Conversion clock input. - spi-max-frequency: true - vref-p-supply: description: The regulator supply for positive analog voltage reference @@ -62,7 +60,10 @@ required: - clocks - vref-p-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/adc/ti,adc128s052.yaml b/dts/Bindings/iio/adc/ti,adc128s052.yaml index d54a0183f0..775eee972b 100644 --- a/dts/Bindings/iio/adc/ti,adc128s052.yaml +++ b/dts/Bindings/iio/adc/ti,adc128s052.yaml @@ -27,8 +27,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: true "#io-channel-cells": @@ -39,7 +37,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/adc/ti,adc161s626.yaml b/dts/Bindings/iio/adc/ti,adc161s626.yaml index 3f4f334d6f..afe7825229 100644 --- a/dts/Bindings/iio/adc/ti,adc161s626.yaml +++ b/dts/Bindings/iio/adc/ti,adc161s626.yaml @@ -21,8 +21,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vdda-supply: true "#io-channel-cells": @@ -32,7 +30,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/adc/ti,ads1015.yaml b/dts/Bindings/iio/adc/ti,ads1015.yaml index a3b79438a1..d605999ffe 100644 --- a/dts/Bindings/iio/adc/ti,ads1015.yaml +++ b/dts/Bindings/iio/adc/ti,ads1015.yaml @@ -23,6 +23,9 @@ properties: reg: maxItems: 1 + interrupts: + maxItems: 1 + "#address-cells": const: 1 @@ -43,6 +46,7 @@ additionalProperties: false patternProperties: "^channel@[0-7]+$": type: object + additionalProperties: false description: Child nodes needed for each channel that the platform uses. @@ -77,9 +81,9 @@ patternProperties: ti,datarate: $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 - maximum: 6 + maximum: 7 description: | - Data acquisition rate in samples per second + Data acquisition rate in samples per second for ADS1015, TLA2024 0: 128 1: 250 2: 490 @@ -87,6 +91,17 @@ patternProperties: 4: 1600 (default) 5: 2400 6: 3300 + 7: 3300 + + Data acquisition rate in samples per second for ADS1115 + 0: 8 + 1: 16 + 2: 32 + 3: 64 + 4: 128 (default) + 5: 250 + 6: 475 + 7: 860 required: - reg @@ -103,12 +118,12 @@ examples: #address-cells = <1>; #size-cells = <0>; channel@0 { - reg = <0>; + reg = <0>; }; channel@4 { - reg = <4>; - ti,gain = <3>; - ti,datarate = <5>; + reg = <4>; + ti,gain = <3>; + ti,datarate = <5>; }; }; }; diff --git a/dts/Bindings/iio/adc/ti,ads1100.yaml b/dts/Bindings/iio/adc/ti,ads1100.yaml new file mode 100644 index 0000000000..970ccab15e --- /dev/null +++ b/dts/Bindings/iio/adc/ti,ads1100.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,ads1100.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI ADS1100/ADS1000 single channel I2C analog to digital converter + +maintainers: + - Mike Looijmans <mike.looijmans@topic.nl> + +description: | + Datasheet at: https://www.ti.com/lit/gpn/ads1100 + +properties: + compatible: + enum: + - ti,ads1100 + - ti,ads1000 + + reg: + maxItems: 1 + + vdd-supply: true + + "#io-channel-cells": + const: 0 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + adc@49 { + compatible = "ti,ads1100"; + reg = <0x49>; + }; + }; +... diff --git a/dts/Bindings/iio/adc/ti,ads124s08.yaml b/dts/Bindings/iio/adc/ti,ads124s08.yaml index 2e6abc9d74..56a3f1766a 100644 --- a/dts/Bindings/iio/adc/ti,ads124s08.yaml +++ b/dts/Bindings/iio/adc/ti,ads124s08.yaml @@ -18,8 +18,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - spi-cpha: true reset-gpios: @@ -32,7 +30,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/adc/ti,ads1298.yaml b/dts/Bindings/iio/adc/ti,ads1298.yaml new file mode 100644 index 0000000000..bf5a43a81d --- /dev/null +++ b/dts/Bindings/iio/adc/ti,ads1298.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,ads1298.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments' ads1298 medical ADC chips + +description: | + Datasheet at: https://www.ti.com/product/ADS1298 + Bindings for this chip aren't complete. + +maintainers: + - Mike Looijmans <mike.looijmans@topic.nl> + +properties: + compatible: + enum: + - ti,ads1298 + + reg: + maxItems: 1 + + spi-cpha: true + + reset-gpios: + maxItems: 1 + + avdd-supply: + description: + Analog power supply, voltage between AVDD and AVSS. When providing a + symmetric +/- 2.5V, the regulator should report 5V. + + vref-supply: + description: + Optional reference voltage. If omitted, internal reference is used, + which is 2.4V when analog supply is below 4.4V, 4V otherwise. + + clocks: + description: Optional 2.048 MHz external source clock on CLK pin + maxItems: 1 + + interrupts: + description: Interrupt on DRDY pin, triggers on falling edge + maxItems: 1 + + label: true + +required: + - compatible + - reg + - avdd-supply + - interrupts + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@1 { + reg = <1>; + compatible = "ti,ads1298"; + label = "ads1298-1-ecg"; + avdd-supply = <®_iso_5v_a>; + clocks = <&clk_ads1298>; + interrupt-parent = <&gpio0>; + interrupts = <78 IRQ_TYPE_EDGE_FALLING>; + spi-max-frequency = <20000000>; + spi-cpha; + }; + }; +... diff --git a/dts/Bindings/iio/adc/ti,ads131e08.yaml b/dts/Bindings/iio/adc/ti,ads131e08.yaml index e0670e3fbb..890f125d42 100644 --- a/dts/Bindings/iio/adc/ti,ads131e08.yaml +++ b/dts/Bindings/iio/adc/ti,ads131e08.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Texas Instruments ADS131E0x 4-, 6- and 8-Channel ADCs maintainers: - - Tomislav Denis <tomislav.denis@avl.com> + - Jonathan Cameron <jic23@kernel.org> description: | The ADS131E0x are a family of multichannel, simultaneous sampling, @@ -28,8 +28,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - spi-cpha: true clocks: @@ -79,7 +77,7 @@ required: patternProperties: "^channel@([0-7])$": - $ref: "adc.yaml" + $ref: adc.yaml type: object description: | Represents the external channels which are connected to the ADC. @@ -120,7 +118,10 @@ patternProperties: additionalProperties: false -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/adc/ti,ads7924.yaml b/dts/Bindings/iio/adc/ti,ads7924.yaml new file mode 100644 index 0000000000..0d8d06afed --- /dev/null +++ b/dts/Bindings/iio/adc/ti,ads7924.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,ads7924.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI ADS7924 4 channels 12 bits I2C analog to digital converter + +maintainers: + - Hugo Villeneuve <hvilleneuve@dimonoff.com> + +description: | + Texas Instruments ADS7924 4 channels 12 bits I2C analog to digital converter + + Specifications: + https://www.ti.com/lit/gpn/ads7924 + +properties: + compatible: + const: ti,ads7924 + + reg: + maxItems: 1 + + vref-supply: + description: + The regulator supply for the ADC reference voltage (AVDD) + + reset-gpios: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + "#io-channel-cells": + const: 1 + +patternProperties: + "^channel@[0-3]+$": + $ref: adc.yaml + + description: | + Represents the external channels which are connected to the ADC. + + properties: + reg: + description: | + The channel number. It can have up to 4 channels numbered from 0 to 3. + items: + - minimum: 0 + maximum: 3 + + label: true + + required: + - reg + + additionalProperties: false + +additionalProperties: false + +required: + - compatible + - reg + - vref-supply + - "#address-cells" + - "#size-cells" + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + adc@48 { + compatible = "ti,ads7924"; + reg = <0x48>; + vref-supply = <&ads7924_reg>; + reset-gpios = <&gpio 5 GPIO_ACTIVE_LOW>; + interrupts = <25 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio>; + #address-cells = <1>; + #size-cells = <0>; + channel@0 { + reg = <0>; + label = "CH0"; + }; + channel@1 { + reg = <1>; + label = "CH1"; + }; + channel@2 { + reg = <2>; + label = "CH2"; + }; + channel@3 { + reg = <3>; + label = "CH3"; + }; + }; + }; +... diff --git a/dts/Bindings/iio/adc/ti,ads8344.yaml b/dts/Bindings/iio/adc/ti,ads8344.yaml index b8c398187d..f75b2c7029 100644 --- a/dts/Bindings/iio/adc/ti,ads8344.yaml +++ b/dts/Bindings/iio/adc/ti,ads8344.yaml @@ -19,8 +19,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: description: Supply the 2.5V or 5V reference voltage @@ -32,7 +30,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/adc/ti,ads8688.yaml b/dts/Bindings/iio/adc/ti,ads8688.yaml index a0af4b2487..f26fdbc15f 100644 --- a/dts/Bindings/iio/adc/ti,ads8688.yaml +++ b/dts/Bindings/iio/adc/ti,ads8688.yaml @@ -25,13 +25,14 @@ properties: description: Optional external reference. If not supplied, assume REFSEL input tied low to enable the internal reference. - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/adc/ti,am3359-adc.yaml b/dts/Bindings/iio/adc/ti,am3359-adc.yaml index d6f21d5ccc..b32be24a9f 100644 --- a/dts/Bindings/iio/adc/ti,am3359-adc.yaml +++ b/dts/Bindings/iio/adc/ti,am3359-adc.yaml @@ -11,9 +11,14 @@ maintainers: properties: compatible: - enum: - - ti,am3359-adc - - ti,am4372-adc + oneOf: + - enum: + - ti,am3359-adc + - ti,am4372-adc + - items: + - enum: + - ti,am654-adc + - const: ti,am3359-adc '#io-channel-cells': const: 1 diff --git a/dts/Bindings/iio/adc/ti,lmp92064.yaml b/dts/Bindings/iio/adc/ti,lmp92064.yaml new file mode 100644 index 0000000000..5fb65bf774 --- /dev/null +++ b/dts/Bindings/iio/adc/ti,lmp92064.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,lmp92064.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments LMP92064 Precision Current and Voltage Sensor. + +maintainers: + - Leonard Göhrs <l.goehrs@pengutronix.de> + +description: | + The LMP92064 is a two channel ADC intended for combined voltage and current + measurements. + + The device contains two ADCs to allow simultaneous sampling of voltage and + current and thus of instantaneous power consumption. + +properties: + compatible: + enum: + - ti,lmp92064 + + reg: + maxItems: 1 + + vdd-supply: + description: Regulator that provides power to the main part of the chip + + vdig-supply: + description: | + Regulator that provides power to the digital I/O part of the chip + + shunt-resistor-micro-ohms: + description: | + Value of the shunt resistor (in µΩ) connected between INCP and INCN, + across which current is measured. Used to provide correct scaling of the + raw ADC measurement. + + reset-gpios: + maxItems: 1 + +required: + - compatible + - reg + - shunt-resistor-micro-ohms + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + adc@0 { + compatible = "ti,lmp92064"; + reg = <0>; + vdd-supply = <&vdd>; + vdig-supply = <&vdd>; + spi-max-frequency = <20000000>; + shunt-resistor-micro-ohms = <15000>; + reset-gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; + }; + }; +... diff --git a/dts/Bindings/iio/adc/ti,palmas-gpadc.yaml b/dts/Bindings/iio/adc/ti,palmas-gpadc.yaml index 57a3135608..f94057d8f6 100644 --- a/dts/Bindings/iio/adc/ti,palmas-gpadc.yaml +++ b/dts/Bindings/iio/adc/ti,palmas-gpadc.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/iio/adc/ti,palmas-gpadc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Palmas general purpose ADC IP block devicetree bindings +title: Palmas general purpose ADC IP block maintainers: - Tony Lindgren <tony@atomide.com> @@ -67,19 +67,4 @@ required: - compatible - "#io-channel-cells" -examples: - - | - #include <dt-bindings/clock/mt8183-clk.h> - pmic { - compatible = "ti,twl6035-pmic", "ti,palmas-pmic"; - adc { - compatible = "ti,palmas-gpadc"; - interrupts = <18 0>, - <16 0>, - <17 0>; - #io-channel-cells = <1>; - ti,channel0-current-microamp = <5>; - ti,channel3-current-microamp = <10>; - }; - }; ... diff --git a/dts/Bindings/iio/adc/ti,tlc4541.yaml b/dts/Bindings/iio/adc/ti,tlc4541.yaml index 6c2539b3d7..314d1d99bf 100644 --- a/dts/Bindings/iio/adc/ti,tlc4541.yaml +++ b/dts/Bindings/iio/adc/ti,tlc4541.yaml @@ -21,8 +21,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: true "#io-channel-cells": @@ -33,7 +31,10 @@ required: - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/adc/ti,tsc2046.yaml b/dts/Bindings/iio/adc/ti,tsc2046.yaml index 601d69971d..866a05c9db 100644 --- a/dts/Bindings/iio/adc/ti,tsc2046.yaml +++ b/dts/Bindings/iio/adc/ti,tsc2046.yaml @@ -23,7 +23,8 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true + vref-supply: + description: Optional supply of the reference voltage "#io-channel-cells": const: 1 @@ -40,7 +41,7 @@ required: patternProperties: "^channel@[0-7]$": - $ref: "adc.yaml" + $ref: adc.yaml type: object properties: @@ -59,7 +60,10 @@ patternProperties: additionalProperties: false -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | @@ -79,36 +83,36 @@ examples: #size-cells = <0>; channel@0 { - reg = <0>; + reg = <0>; }; channel@1 { - reg = <1>; - settling-time-us = <700>; - oversampling-ratio = <5>; + reg = <1>; + settling-time-us = <700>; + oversampling-ratio = <5>; }; channel@2 { - reg = <2>; + reg = <2>; }; channel@3 { - reg = <3>; - settling-time-us = <700>; - oversampling-ratio = <5>; + reg = <3>; + settling-time-us = <700>; + oversampling-ratio = <5>; }; channel@4 { - reg = <4>; - settling-time-us = <700>; - oversampling-ratio = <5>; + reg = <4>; + settling-time-us = <700>; + oversampling-ratio = <5>; }; channel@5 { - reg = <5>; - settling-time-us = <700>; - oversampling-ratio = <5>; + reg = <5>; + settling-time-us = <700>; + oversampling-ratio = <5>; }; channel@6 { - reg = <6>; + reg = <6>; }; channel@7 { - reg = <7>; + reg = <7>; }; }; }; diff --git a/dts/Bindings/iio/adc/ti,twl6030-gpadc.yaml b/dts/Bindings/iio/adc/ti,twl6030-gpadc.yaml new file mode 100644 index 0000000000..e779a8986e --- /dev/null +++ b/dts/Bindings/iio/adc/ti,twl6030-gpadc.yaml @@ -0,0 +1,43 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/ti,twl6030-gpadc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPADC subsystem in the TWL6030 power module + +maintainers: + - Andreas Kemnade <andreas@kemnade.info> + +description: + The GPADC subsystem in the TWL603X consists of a 10-bit ADC + combined with a 15-input analog multiplexer in the TWL6030 resp. a + 19-input analog muliplexer in the TWL6032. + +properties: + compatible: + enum: + - ti,twl6030-gpadc + - ti,twl6032-gpadc + + interrupts: + maxItems: 1 + + "#io-channel-cells": + const: 1 + +required: + - compatible + - interrupts + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + gpadc { + compatible = "ti,twl6030-gpadc"; + interrupts = <3>; + #io-channel-cells = <1>; + }; +... diff --git a/dts/Bindings/iio/adc/x-powers,axp209-adc.yaml b/dts/Bindings/iio/adc/x-powers,axp209-adc.yaml index d6d3d85901..d40689f233 100644 --- a/dts/Bindings/iio/adc/x-powers,axp209-adc.yaml +++ b/dts/Bindings/iio/adc/x-powers,axp209-adc.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/iio/adc/x-powers,axp209-adc.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: X-Powers AXP ADC bindings +title: X-Powers AXP ADC maintainers: - Chen-Yu Tsai <wens@csie.org> diff --git a/dts/Bindings/iio/adc/xlnx,zynqmp-ams.yaml b/dts/Bindings/iio/adc/xlnx,zynqmp-ams.yaml index 3698b4b090..8cbad7e792 100644 --- a/dts/Bindings/iio/adc/xlnx,zynqmp-ams.yaml +++ b/dts/Bindings/iio/adc/xlnx,zynqmp-ams.yaml @@ -57,7 +57,7 @@ description: | |27 |FPD Internal voltage measurement, VCC_PSINTFP (supply5). |Voltage |28 |PS Auxiliary voltage measurement (supply6). |Voltage |29 |PL VCCADC voltage measurement (vccams). |Voltage - |30 |Differential analog input signal voltage measurment. |Voltage + |30 |Differential analog input signal voltage measurement. |Voltage |31 |VUser0 voltage measurement (supply7). |Voltage |32 |VUser1 voltage measurement (supply8). |Voltage |33 |VUser2 voltage measurement (supply9). |Voltage @@ -134,6 +134,7 @@ properties: ams-pl@400: type: object + additionalProperties: false description: PL-SYSMON is capable of monitoring off chip voltage and temperature. PL-SYSMON block has DRP, JTAG and I2C interface to enable monitoring diff --git a/dts/Bindings/iio/addac/adi,ad74115.yaml b/dts/Bindings/iio/addac/adi,ad74115.yaml new file mode 100644 index 0000000000..2a04906531 --- /dev/null +++ b/dts/Bindings/iio/addac/adi,ad74115.yaml @@ -0,0 +1,371 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/addac/adi,ad74115.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD74115H device + +maintainers: + - Cosmin Tanislav <cosmin.tanislav@analog.com> + +description: | + The AD74115H is a single-channel software configurable input/output + device for industrial control applications. It contains functionality for + analog output, analog input, digital output, digital input, resistance + temperature detector, and thermocouple measurements integrated into a single + chip solution with an SPI interface. The device features a 16-bit ADC and a + 14-bit DAC. + + https://www.analog.com/en/products/ad74115h.html + +properties: + compatible: + enum: + - adi,ad74115h + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 24000000 + + spi-cpol: true + + reset-gpios: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + maxItems: 2 + items: + enum: + - adc_rdy + - alert + + avdd-supply: true + avcc-supply: true + dvcc-supply: true + dovdd-supply: true + refin-supply: true + + adi,ch-func: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Channel function. + 0 - High impedance + 1 - Voltage output + 2 - Current output + 3 - Voltage input + 4 - Current input, externally-powered + 5 - Current input, loop-powered + 6 - Resistance input + 7 - RTD measure + 8 - Digital input logic + 9 - Digital input, loop-powered + 10 - Current output with HART + 11 - Current input, externally-powered, with HART + 12 - Current input, loop-powered, with HART + minimum: 0 + maximum: 12 + default: 0 + + adi,conv2-mux: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + Input node for ADC conversion 2. + 0 - SENSE_EXT1 to AGND_SENSE + 1 - SENSE_EXT2 to AGND_SENSE + 2 - SENSE_EXT2 to SENSE_EXT1 + 3 - AGND to AGND + minimum: 0 + maximum: 3 + default: 0 + + adi,conv2-range-microvolt: + description: Conversion range for ADC conversion 2. + oneOf: + - items: + - enum: [-2500000, 0] + - const: 2500000 + - items: + - enum: [-12000000, 0] + - const: 12000000 + - items: + - const: -2500000 + - const: 0 + - items: + - const: -104000 + - const: 104000 + - items: + - const: 0 + - const: 625000 + + adi,sense-agnd-buffer-low-power: + type: boolean + description: + Whether to enable low-power buffered mode for the AGND sense pin. + + adi,lf-buffer-low-power: + type: boolean + description: + Whether to enable low-power buffered mode for the low-side filtered + sense pin. + + adi,hf-buffer-low-power: + type: boolean + description: + Whether to enable low-power buffered mode for the high-side filtered + sense pin. + + adi,ext2-buffer-low-power: + type: boolean + description: Whether to enable low-power buffered mode for the EXT2 pin. + + adi,ext1-buffer-low-power: + type: boolean + description: Whether to enable low-power buffered mode for the EXT1 pin. + + adi,comparator-invert: + type: boolean + description: Whether to invert the comparator output. + + adi,digital-input-sink-range-high: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + When not present, the digital input range is from 0 to 3700uA in steps + of 120uA, with a ~2k series resistance. + When present, the digital input range is from 0 to 7400uA in steps + of 240uA, with a ~1k series resistance. + + adi,digital-input-sink-microamp: + description: Sink current in digital input mode. + minimum: 0 + maximum: 3700 + default: 0 + + adi,digital-input-debounce-mode-counter-reset: + type: boolean + description: | + When not present, a counter increments when the signal is asserted + and decrements when the signal is de-asserted. + When present, a counter increments while the signal is asserted and + resets when the signal de-asserts + + adi,digital-input-unbuffered: + type: boolean + description: Whether to buffer digital input signals. + + adi,digital-input-short-circuit-detection: + type: boolean + description: Whether to detect digital input short circuits. + + adi,digital-input-open-circuit-detection: + type: boolean + description: Whether to detect digital input open circuits. + + adi,digital-input-threshold-mode-fixed: + type: boolean + description: | + When not present, the digital input threshold range is -0.96 * AVDD + to AVDD. + When present, the threshold range is fixed from -19V to 30V. + + adi,dac-bipolar: + type: boolean + description: | + When not present, the DAC operates in the 0V to 12V range. + When present, the DAC operates in the -12V to 12V range. + + adi,charge-pump: + type: boolean + description: Whether to enable the internal charge pump. + + adi,dac-hart-slew: + type: boolean + description: Whether to use a HART-compatible slew rate. + + adi,dac-current-limit-low: + type: boolean + description: | + When not present, the DAC short-circuit current limit is 32mA in + either source or sink for VOUT and 4mA sink for IOUT. + When present, the limit is 16mA in either source or sink for VOUT, + 1mA sink for IOUT. + + adi,4-wire-rtd: + type: boolean + description: | + When not present, the ADC should be used for measuring 3-wire RTDs. + When present, the ADC should be used for measuring 4-wire RTDs. + + adi,3-wire-rtd-excitation-swap: + type: boolean + description: Whether to swap the excitation for 3-wire RTD. + + adi,rtd-excitation-current-microamp: + description: Excitation current to apply to RTD. + enum: [250, 500, 750, 1000] + default: 250 + + adi,ext1-burnout: + type: boolean + description: Whether to enable burnout current for EXT1. + + adi,ext1-burnout-current-nanoamp: + description: + Burnout current in nanoamps to be applied to EXT1. + enum: [0, 50, 500, 1000, 10000] + default: 0 + + adi,ext1-burnout-current-polarity-sourcing: + type: boolean + description: | + When not present, the burnout current polarity for EXT1 is sinking. + When present, the burnout current polarity for EXT1 is sourcing. + + adi,ext2-burnout: + type: boolean + description: Whether to enable burnout current for EXT2. + + adi,ext2-burnout-current-nanoamp: + description: Burnout current in nanoamps to be applied to EXT2. + enum: [0, 50, 500, 1000, 10000] + default: 0 + + adi,ext2-burnout-current-polarity-sourcing: + type: boolean + description: | + When not present, the burnout current polarity for EXT2 is sinking. + When present, the burnout current polarity for EXT2 is sourcing. + + adi,viout-burnout: + type: boolean + description: Whether to enable burnout current for VIOUT. + + adi,viout-burnout-current-nanoamp: + description: Burnout current in nanoamps to be applied to VIOUT. + enum: [0, 1000, 10000] + default: 0 + + adi,viout-burnout-current-polarity-sourcing: + type: boolean + description: | + When not present, the burnout current polarity for VIOUT is sinking. + When present, the burnout current polarity for VIOUT is sourcing. + + adi,gpio0-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + GPIO functions. + 0 - Disabled + 1 - Logic I/O + 2 - Comparator output + 3 - Control HART CD + 4 - Monitor HART CD + 5 - Monitor HART EOM status + minimum: 0 + maximum: 5 + default: 0 + + adi,gpio1-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + GPIO functions. + 0 - Disabled + 1 - Logic I/O + 2 - Drive external digital output FET + 3 - Control HART RXD + 4 - Monitor HART RXD + 5 - Monitor HART SOM status + minimum: 0 + maximum: 5 + default: 0 + + adi,gpio2-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + GPIO functions. + 0 - Disabled + 1 - Logic I/O + 2 - Drive internal digital output FET + 3 - Control HART TXD + 4 - Monitor HART TXD + 5 - Monitor HART TX complete status + minimum: 0 + maximum: 5 + default: 0 + + adi,gpio3-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + description: | + GPIO functions. + 0 - Disabled + 1 - Logic I/O + 2 - High impedance + 3 - Control HART RTS + 4 - Monitor HART RTS + 5 - Monitor HART CD complete status + minimum: 0 + maximum: 5 + default: 0 + +required: + - compatible + - reg + - spi-cpol + - avdd-supply + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + - if: + required: + - adi,digital-input-sink-range-high + then: + properties: + adi,digital-input-sink-microamp: + maximum: 7400 + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + addac@0 { + compatible = "adi,ad74115h"; + reg = <0>; + + spi-max-frequency = <12000000>; + spi-cpol; + + reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>; + + interrupt-parent = <&gpio>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + interrupt-names = "adc_rdy"; + + avdd-supply = <&ad74115_avdd>; + + adi,ch-func = <1>; + adi,conv2-mux = <2>; + adi,conv2-range-microvolt = <(-12000000) 12000000>; + + adi,gpio0-mode = <1>; + adi,gpio1-mode = <1>; + adi,gpio2-mode = <1>; + adi,gpio3-mode = <1>; + + adi,dac-bipolar; + }; + }; +... diff --git a/dts/Bindings/iio/addac/adi,ad74413r.yaml b/dts/Bindings/iio/addac/adi,ad74413r.yaml index baa65a521b..590ea7936a 100644 --- a/dts/Bindings/iio/addac/adi,ad74413r.yaml +++ b/dts/Bindings/iio/addac/adi,ad74413r.yaml @@ -51,6 +51,9 @@ properties: Shunt (sense) resistor value in micro-Ohms. default: 100000000 + reset-gpios: + maxItems: 1 + required: - compatible - reg @@ -58,11 +61,10 @@ required: - spi-cpol - refin-supply -additionalProperties: false - patternProperties: "^channel@[0-3]$": type: object + additionalProperties: false description: Represents the external channels which are connected to the device. properties: @@ -99,9 +101,23 @@ patternProperties: When not configured as a comparator, the GPO will be treated as an output-only GPIO. + drive-strength-microamp: + description: | + For channels configured as digital input, this configures the sink + current. + minimum: 0 + maximum: 1800 + default: 0 + multipleOf: 120 + required: - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> @@ -112,10 +128,7 @@ examples: #address-cells = <1>; #size-cells = <0>; - cs-gpios = <&gpio 17 GPIO_ACTIVE_LOW>; - status = "okay"; - - ad74413r@0 { + addac@0 { compatible = "adi,ad74413r"; reg = <0>; spi-max-frequency = <1000000>; @@ -128,6 +141,7 @@ examples: interrupts = <26 IRQ_TYPE_EDGE_FALLING>; refin-supply = <&ad74413r_refin>; + reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; channel@0 { reg = <0>; diff --git a/dts/Bindings/iio/afe/voltage-divider.yaml b/dts/Bindings/iio/afe/voltage-divider.yaml index df2589f214..4151f99b42 100644 --- a/dts/Bindings/iio/afe/voltage-divider.yaml +++ b/dts/Bindings/iio/afe/voltage-divider.yaml @@ -13,7 +13,7 @@ description: | When an io-channel measures the midpoint of a voltage divider, the interesting voltage is often the voltage over the full resistance of the divider. This binding describes the voltage divider in such - a curcuit. + a circuit. Vin ----. | @@ -39,6 +39,17 @@ properties: description: | Channel node of a voltage io-channel. + '#io-channel-cells': + description: + In addition to consuming the measurement services of a voltage + output channel, the voltage divider can act as a provider of + measurement services to other devices. This is particularly + useful in scenarios wherein an ADC has an analog frontend, + such as a voltage divider, and then consuming its raw value + isn't interesting. In this case, the voltage before the divider + is desired. + const: 1 + output-ohms: description: Resistance Rout over which the output voltage is measured. See full-ohms. diff --git a/dts/Bindings/iio/amplifiers/adi,ada4250.yaml b/dts/Bindings/iio/amplifiers/adi,ada4250.yaml index 5277479be3..c15da155d3 100644 --- a/dts/Bindings/iio/amplifiers/adi,ada4250.yaml +++ b/dts/Bindings/iio/amplifiers/adi,ada4250.yaml @@ -27,14 +27,15 @@ properties: Enable internal buffer to drive the reference pin. type: boolean - spi-max-frequency: true - required: - compatible - reg - avdd-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/amplifiers/adi,hmc425a.yaml b/dts/Bindings/iio/amplifiers/adi,hmc425a.yaml index 9fda56fa49..3a470459b9 100644 --- a/dts/Bindings/iio/amplifiers/adi,hmc425a.yaml +++ b/dts/Bindings/iio/amplifiers/adi,hmc425a.yaml @@ -4,30 +4,81 @@ $id: http://devicetree.org/schemas/iio/amplifiers/adi,hmc425a.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: HMC425A 6-bit Digital Step Attenuator +title: Analog Devices HMC425A and similar Digital Step Attenuators maintainers: - Michael Hennerich <michael.hennerich@analog.com> description: | - Digital Step Attenuator IIO device with gpio interface. + Digital Step Attenuator IIO devices with gpio interface. + Offer various frequency and attenuation ranges. + ADRF5750 2 dB LSB, 4-Bit, Silicon Digital Attenuator, 10 MHz to 60 GHz + https://www.analog.com/media/en/technical-documentation/data-sheets/adrf5740.pdf + HMC425A 0.5 dB LSB GaAs MMIC 6-BIT DIGITAL POSITIVE CONTROL ATTENUATOR, 2.2 - 8.0 GHz - https://www.analog.com/media/en/technical-documentation/data-sheets/hmc425A.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/hmc425A.pdf + + HMC540S 1 dB LSB Silicon MMIC 4-Bit Digital Positive Control Attenuator, 0.1 - 8 GHz + https://www.analog.com/media/en/technical-documentation/data-sheets/hmc540s.pdf + + LTC6373 is a 3-Bit precision instrumentation amplifier with fully differential outputs + https://www.analog.com/media/en/technical-documentation/data-sheets/ltc6373.pdf properties: compatible: enum: + - adi,adrf5740 - adi,hmc425a + - adi,hmc540s + - adi,ltc6373 vcc-supply: true ctrl-gpios: description: - Must contain an array of 6 GPIO specifiers, referring to the GPIO pins - connected to the control pins V1-V6. - minItems: 6 + Must contain an array of GPIO specifiers, referring to the GPIO pins + connected to the control pins. + ADRF5740 - 4 GPIO connected to D2-D5 + HMC540S - 4 GPIO connected to V1-V4 + HMC425A - 6 GPIO connected to V1-V6 + LTC6373 - 3 GPIO connected to A0-A2 + minItems: 1 maxItems: 6 +allOf: + - if: + properties: + compatible: + contains: + const: adi,hmc425a + then: + properties: + ctrl-gpios: + minItems: 6 + maxItems: 6 + - if: + properties: + compatible: + contains: + anyOf: + - const: adi,adrf5740 + - const: adi,hmc540s + then: + properties: + ctrl-gpios: + minItems: 4 + maxItems: 4 + - if: + properties: + compatible: + contains: + const: adi,ltc6373 + then: + properties: + ctrl-gpios: + minItems: 3 + maxItems: 3 + required: - compatible - ctrl-gpios diff --git a/dts/Bindings/iio/cdc/adi,ad7150.yaml b/dts/Bindings/iio/cdc/adi,ad7150.yaml index 2155d3f566..3d7074fd17 100644 --- a/dts/Bindings/iio/cdc/adi,ad7150.yaml +++ b/dts/Bindings/iio/cdc/adi,ad7150.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/iio/cdc/adi,ad7150.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Analog device AD7150 and similar capacitance to digital convertors. +title: Analog device AD7150 and similar capacitance to digital converters. maintainers: - Jonathan Cameron <jic23@kernel.org> diff --git a/dts/Bindings/iio/chemical/aosong,ags02ma.yaml b/dts/Bindings/iio/chemical/aosong,ags02ma.yaml new file mode 100644 index 0000000000..35e7b094e8 --- /dev/null +++ b/dts/Bindings/iio/chemical/aosong,ags02ma.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/chemical/aosong,ags02ma.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aosong AGS02MA VOC Sensor + +description: | + AGS02MA is an TVOC (Total Volatile Organic Compounds) i2c sensor with default + address of 0x1a. + + Datasheet: + https://asairsensors.com/wp-content/uploads/2021/09/AGS02MA.pdf + +maintainers: + - Anshul Dalal <anshulusr@gmail.com> + +properties: + compatible: + enum: + - aosong,ags02ma + + reg: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + - vdd-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + voc-sensor@1a { + compatible = "aosong,ags02ma"; + reg = <0x1a>; + vdd-supply = <&vdd_regulator>; + }; + }; diff --git a/dts/Bindings/iio/common.yaml b/dts/Bindings/iio/common.yaml index f845b41d74..b3a10af86d 100644 --- a/dts/Bindings/iio/common.yaml +++ b/dts/Bindings/iio/common.yaml @@ -12,7 +12,7 @@ maintainers: description: | This document defines device tree properties common to several iio - sensors. It doesn't constitue a device tree binding specification by itself but + sensors. It doesn't constitute a device tree binding specification by itself but is meant to be referenced by device tree bindings. When referenced from sensor tree bindings the properties defined in this diff --git a/dts/Bindings/iio/dac/adi,ad3552r.yaml b/dts/Bindings/iio/dac/adi,ad3552r.yaml index 9c48c76993..96340a0575 100644 --- a/dts/Bindings/iio/dac/adi,ad3552r.yaml +++ b/dts/Bindings/iio/dac/adi,ad3552r.yaml @@ -78,6 +78,7 @@ patternProperties: custom-output-range-config: type: object + additionalProperties: false description: Configuration of custom range when adi,output-range-microvolt is not present. The formulas for calculation the output voltages are @@ -191,26 +192,26 @@ additionalProperties: false examples: - | spi { - #address-cells = <1>; - #size-cells = <0>; - ad3552r@0 { - compatible = "adi,ad3552r"; - reg = <0>; - spi-max-frequency = <20000000>; - #address-cells = <1>; - #size-cells = <0>; - channel@0 { - reg = <0>; - adi,output-range-microvolt = <0 10000000>; - }; - channel@1 { - reg = <1>; - custom-output-range-config { - adi,gain-offset = <5>; - adi,gain-scaling-p-inv-log2 = <1>; - adi,gain-scaling-n-inv-log2 = <2>; - adi,rfb-ohms = <1>; - }; + #address-cells = <1>; + #size-cells = <0>; + ad3552r@0 { + compatible = "adi,ad3552r"; + reg = <0>; + spi-max-frequency = <20000000>; + #address-cells = <1>; + #size-cells = <0>; + channel@0 { + reg = <0>; + adi,output-range-microvolt = <0 10000000>; + }; + channel@1 { + reg = <1>; + custom-output-range-config { + adi,gain-offset = <5>; + adi,gain-scaling-p-inv-log2 = <1>; + adi,gain-scaling-n-inv-log2 = <2>; + adi,rfb-ohms = <1>; + }; }; }; }; diff --git a/dts/Bindings/iio/dac/adi,ad5064.yaml b/dts/Bindings/iio/dac/adi,ad5064.yaml index 05ed4e0ec3..c04165fa92 100644 --- a/dts/Bindings/iio/dac/adi,ad5064.yaml +++ b/dts/Bindings/iio/dac/adi,ad5064.yaml @@ -95,15 +95,12 @@ properties: vrefD-supply: true vref-supply: true - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - # Shared external vref, no internal reference if: properties: @@ -232,6 +229,8 @@ allOf: - vrefA-supply - vrefB-supply +unevaluatedProperties: false + examples: - | spi { diff --git a/dts/Bindings/iio/dac/adi,ad5360.yaml b/dts/Bindings/iio/dac/adi,ad5360.yaml index 65f86f2694..86e2884cdf 100644 --- a/dts/Bindings/iio/dac/adi,ad5360.yaml +++ b/dts/Bindings/iio/dac/adi,ad5360.yaml @@ -28,10 +28,6 @@ properties: vref1-supply: true vref2-supply: true - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg @@ -39,6 +35,7 @@ required: - vref1-supply allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible: @@ -63,6 +60,8 @@ allOf: required: - vref2-supply +unevaluatedProperties: false + examples: - | spi { diff --git a/dts/Bindings/iio/dac/adi,ad5380.yaml b/dts/Bindings/iio/dac/adi,ad5380.yaml index d599b418a0..9eb9928500 100644 --- a/dts/Bindings/iio/dac/adi,ad5380.yaml +++ b/dts/Bindings/iio/dac/adi,ad5380.yaml @@ -12,6 +12,7 @@ maintainers: description: | DAC devices supporting both SPI and I2C interfaces. + properties: compatible: enum: @@ -39,14 +40,15 @@ properties: description: If not supplied devices will use internal regulators. - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/dts/Bindings/iio/dac/adi,ad5421.yaml b/dts/Bindings/iio/dac/adi,ad5421.yaml index 188f656617..52d089ebde 100644 --- a/dts/Bindings/iio/dac/adi,ad5421.yaml +++ b/dts/Bindings/iio/dac/adi,ad5421.yaml @@ -26,13 +26,14 @@ properties: maxItems: 1 description: Fault signal. - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/dac/adi,ad5449.yaml b/dts/Bindings/iio/dac/adi,ad5449.yaml index 044332c977..d2af2d4919 100644 --- a/dts/Bindings/iio/dac/adi,ad5449.yaml +++ b/dts/Bindings/iio/dac/adi,ad5449.yaml @@ -27,19 +27,16 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - VREF-supply: true VREFA-supply: true VREFB-supply: true -additionalProperties: false - required: - compatible - reg allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible: @@ -72,6 +69,8 @@ allOf: - VREFA-supply - VREFB-supply +unevaluatedProperties: false + examples: - | spi { diff --git a/dts/Bindings/iio/dac/adi,ad5624r.yaml b/dts/Bindings/iio/dac/adi,ad5624r.yaml index 330383b85e..4d5111a5f9 100644 --- a/dts/Bindings/iio/dac/adi,ad5624r.yaml +++ b/dts/Bindings/iio/dac/adi,ad5624r.yaml @@ -22,17 +22,18 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: description: If not present, internal reference will be used. -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/dts/Bindings/iio/dac/adi,ad5686.yaml b/dts/Bindings/iio/dac/adi,ad5686.yaml index 5c26441eae..b4400c52be 100644 --- a/dts/Bindings/iio/dac/adi,ad5686.yaml +++ b/dts/Bindings/iio/dac/adi,ad5686.yaml @@ -33,6 +33,7 @@ properties: - description: I2C devices enum: - adi,ad5311r + - adi,ad5337r - adi,ad5338r - adi,ad5671r - adi,ad5675r @@ -53,14 +54,15 @@ properties: vcc-supply: description: If not supplied the internal reference is used. - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/dts/Bindings/iio/dac/adi,ad5755.yaml b/dts/Bindings/iio/dac/adi,ad5755.yaml index f866b88e14..9a3c2926bf 100644 --- a/dts/Bindings/iio/dac/adi,ad5755.yaml +++ b/dts/Bindings/iio/dac/adi,ad5755.yaml @@ -25,8 +25,6 @@ properties: description: Either this or spi-cpol but not both. spi-cpol: true - spi-max-frequency: true - adi,ext-dc-dc-compenstation-resistor: $ref: /schemas/types.yaml#/definitions/flag description: @@ -67,8 +65,6 @@ required: - compatible - reg -additionalProperties: false - patternProperties: "^channel@[0-7]$": type: object @@ -123,6 +119,11 @@ oneOf: - required: - spi-cpol +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/dts/Bindings/iio/dac/adi,ad5758.yaml b/dts/Bindings/iio/dac/adi,ad5758.yaml index fd4edca34a..5121685337 100644 --- a/dts/Bindings/iio/dac/adi,ad5758.yaml +++ b/dts/Bindings/iio/dac/adi,ad5758.yaml @@ -16,7 +16,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true spi-cpha: true adi,dc-dc-mode: @@ -79,7 +78,8 @@ properties: - const: -1000 - const: 22000 - reset-gpios: true + reset-gpios: + maxItems: 1 adi,dc-dc-ilim-microamp: enum: [150000, 200000, 250000, 300000, 350000, 400000] @@ -99,11 +99,11 @@ required: - adi,dc-dc-mode allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: adi,dc-dc-mode: - contains: - enum: [1, 3] + enum: [1, 3] then: properties: adi,range-microvolt: false @@ -115,7 +115,7 @@ allOf: required: - adi,range-microvolt -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/dac/adi,ad5761.yaml b/dts/Bindings/iio/dac/adi,ad5761.yaml index 7f95a9ed55..df550b5af2 100644 --- a/dts/Bindings/iio/dac/adi,ad5761.yaml +++ b/dts/Bindings/iio/dac/adi,ad5761.yaml @@ -22,18 +22,15 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: description: If not supplied, internal reference will be used. -additionalProperties: false - required: - compatible - reg allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible: @@ -45,6 +42,8 @@ allOf: required: - vref-supply +unevaluatedProperties: false + examples: - | spi { diff --git a/dts/Bindings/iio/dac/adi,ad5764.yaml b/dts/Bindings/iio/dac/adi,ad5764.yaml index 8e893d52bf..0b409a727a 100644 --- a/dts/Bindings/iio/dac/adi,ad5764.yaml +++ b/dts/Bindings/iio/dac/adi,ad5764.yaml @@ -22,18 +22,15 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vrefAB-supply: true vrefCD-supply: true -additionalProperties: false - required: - compatible - reg allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible: @@ -46,6 +43,8 @@ allOf: - vrefAB-supply - vrefCD-supply +unevaluatedProperties: false + examples: - | spi { diff --git a/dts/Bindings/iio/dac/adi,ad5766.yaml b/dts/Bindings/iio/dac/adi,ad5766.yaml index 29bd16dab5..212c936bab 100644 --- a/dts/Bindings/iio/dac/adi,ad5766.yaml +++ b/dts/Bindings/iio/dac/adi,ad5766.yaml @@ -8,7 +8,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Analog Devices AD5766 DAC device driver maintainers: - - Cristian Pop <cristian.pop@analog.com> + - Nuno Sá <nuno.sa@analog.com> description: | Bindings for the Analog Devices AD5766 current DAC device. Datasheet can be @@ -51,15 +51,15 @@ additionalProperties: false examples: - | spi { - #address-cells = <1>; - #size-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; - ad5766@0 { - compatible = "adi,ad5766"; - output-range-microvolts = <(-5000000) 5000000>; - reg = <0>; - spi-cpol; - spi-max-frequency = <1000000>; - reset-gpios = <&gpio 22 0>; - }; - }; + ad5766@0 { + compatible = "adi,ad5766"; + output-range-microvolts = <(-5000000) 5000000>; + reg = <0>; + spi-cpol; + spi-max-frequency = <1000000>; + reset-gpios = <&gpio 22 0>; + }; + }; diff --git a/dts/Bindings/iio/dac/adi,ad5770r.yaml b/dts/Bindings/iio/dac/adi,ad5770r.yaml index 24ac40180a..82b0eed6a7 100644 --- a/dts/Bindings/iio/dac/adi,ad5770r.yaml +++ b/dts/Bindings/iio/dac/adi,ad5770r.yaml @@ -49,8 +49,6 @@ properties: asserted during driver probe. maxItems: 1 - spi-max-frequency: true - '#address-cells': const: 1 @@ -62,6 +60,7 @@ properties: connected to the DAC. Channel 0 can act both as a current source and sink. type: object + additionalProperties: false properties: reg: @@ -85,6 +84,7 @@ properties: description: Represents an external channel which are connected to the DAC. type: object + additionalProperties: false properties: reg: @@ -101,6 +101,7 @@ properties: description: Represents an external channel which are connected to the DAC. type: object + additionalProperties: false properties: reg: @@ -116,6 +117,7 @@ properties: patternProperties: "^channel@([3-5])$": type: object + additionalProperties: false description: Represents the external channels which are connected to the DAC. properties: reg: @@ -138,53 +140,56 @@ required: - channel@4 - channel@5 -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | - spi { - #address-cells = <1>; - #size-cells = <0>; - - ad5770r@0 { - compatible = "adi,ad5770r"; - reg = <0>; - spi-max-frequency = <1000000>; - vref-supply = <&vref>; - adi,external-resistor; - reset-gpios = <&gpio 22 0>; - #address-cells = <1>; - #size-cells = <0>; - - channel@0 { - reg = <0>; - adi,range-microamp = <0 300000>; - }; - - channel@1 { - reg = <1>; - adi,range-microamp = <0 140000>; - }; - - channel@2 { - reg = <2>; - adi,range-microamp = <0 55000>; - }; - - channel@3 { - reg = <3>; - adi,range-microamp = <0 45000>; - }; - - channel@4 { - reg = <4>; - adi,range-microamp = <0 45000>; - }; - - channel@5 { - reg = <5>; - adi,range-microamp = <0 45000>; - }; - }; + spi { + #address-cells = <1>; + #size-cells = <0>; + + ad5770r@0 { + compatible = "adi,ad5770r"; + reg = <0>; + spi-max-frequency = <1000000>; + vref-supply = <&vref>; + adi,external-resistor; + reset-gpios = <&gpio 22 0>; + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + adi,range-microamp = <0 300000>; + }; + + channel@1 { + reg = <1>; + adi,range-microamp = <0 140000>; + }; + + channel@2 { + reg = <2>; + adi,range-microamp = <0 55000>; + }; + + channel@3 { + reg = <3>; + adi,range-microamp = <0 45000>; + }; + + channel@4 { + reg = <4>; + adi,range-microamp = <0 45000>; + }; + + channel@5 { + reg = <5>; + adi,range-microamp = <0 45000>; + }; }; + }; ... diff --git a/dts/Bindings/iio/dac/adi,ad5791.yaml b/dts/Bindings/iio/dac/adi,ad5791.yaml index 650d1ebdce..c81285d84d 100644 --- a/dts/Bindings/iio/dac/adi,ad5791.yaml +++ b/dts/Bindings/iio/dac/adi,ad5791.yaml @@ -23,12 +23,13 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vdd-supply: true vss-supply: true -additionalProperties: false + adi,rbuf-gain2-en: + description: Specify to allow an external amplifier to be connected in a + gain of two configuration. + type: boolean required: - compatible @@ -36,6 +37,11 @@ required: - vdd-supply - vss-supply +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/dts/Bindings/iio/dac/adi,ad8801.yaml b/dts/Bindings/iio/dac/adi,ad8801.yaml index 6a3990a8d0..1849a2ff05 100644 --- a/dts/Bindings/iio/dac/adi,ad8801.yaml +++ b/dts/Bindings/iio/dac/adi,ad8801.yaml @@ -19,19 +19,16 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vrefh-supply: true vrefl-supply: true -additionalProperties: false - required: - compatible - reg - vrefh-supply allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible: @@ -44,6 +41,8 @@ allOf: properties: vrefl-supply: false +unevaluatedProperties: false + examples: - | spi { diff --git a/dts/Bindings/iio/dac/adi,ltc2688.yaml b/dts/Bindings/iio/dac/adi,ltc2688.yaml index 48f9e7d294..f22ef710ec 100644 --- a/dts/Bindings/iio/dac/adi,ltc2688.yaml +++ b/dts/Bindings/iio/dac/adi,ltc2688.yaml @@ -48,6 +48,7 @@ properties: patternProperties: "^channel@([0-9]|1[0-5])$": type: object + additionalProperties: false properties: reg: @@ -115,32 +116,32 @@ examples: - | spi { - #address-cells = <1>; - #size-cells = <0>; - ltc2688: ltc2688@0 { - compatible = "adi,ltc2688"; - reg = <0>; - - vcc-supply = <&vcc>; - iovcc-supply = <&vcc>; - vref-supply = <&vref>; - - #address-cells = <1>; - #size-cells = <0>; - channel@0 { - reg = <0>; - adi,toggle-mode; - adi,overrange; - }; - - channel@1 { - reg = <1>; - adi,output-range-microvolt = <0 10000000>; - - clocks = <&clock_tgp3>; - adi,toggle-dither-input = <2>; - }; - }; + #address-cells = <1>; + #size-cells = <0>; + ltc2688: ltc2688@0 { + compatible = "adi,ltc2688"; + reg = <0>; + + vcc-supply = <&vcc>; + iovcc-supply = <&vcc>; + vref-supply = <&vref>; + + #address-cells = <1>; + #size-cells = <0>; + channel@0 { + reg = <0>; + adi,toggle-mode; + adi,overrange; + }; + + channel@1 { + reg = <1>; + adi,output-range-microvolt = <0 10000000>; + + clocks = <&clock_tgp3>; + adi,toggle-dither-input = <2>; + }; + }; }; ... diff --git a/dts/Bindings/iio/dac/lltc,ltc1660.yaml b/dts/Bindings/iio/dac/lltc,ltc1660.yaml index 133b0f8679..c9f51d00fa 100644 --- a/dts/Bindings/iio/dac/lltc,ltc1660.yaml +++ b/dts/Bindings/iio/dac/lltc,ltc1660.yaml @@ -2,8 +2,8 @@ # Copyright 2019 Marcus Folkesson <marcus.folkesson@gmail.com> %YAML 1.2 --- -$id: "http://devicetree.org/schemas/iio/dac/lltc,ltc1660.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/iio/dac/lltc,ltc1660.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Linear Technology Micropower octal 8-Bit and 10-Bit DACs diff --git a/dts/Bindings/iio/dac/lltc,ltc2632.yaml b/dts/Bindings/iio/dac/lltc,ltc2632.yaml index b1eb77335d..733edc7d6d 100644 --- a/dts/Bindings/iio/dac/lltc,ltc2632.yaml +++ b/dts/Bindings/iio/dac/lltc,ltc2632.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause %YAML 1.2 --- -$id: "http://devicetree.org/schemas/iio/dac/lltc,ltc2632.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/iio/dac/lltc,ltc2632.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Linear Technology LTC263x 12-/10-/8-Bit Rail-to-Rail DAC @@ -64,14 +64,14 @@ examples: }; spi { - #address-cells = <1>; - #size-cells = <0>; + #address-cells = <1>; + #size-cells = <0>; - dac@0 { - compatible = "lltc,ltc2632-l12"; - reg = <0>; /* CS0 */ - spi-max-frequency = <1000000>; - vref-supply = <&vref>; - }; + dac@0 { + compatible = "lltc,ltc2632-l12"; + reg = <0>; /* CS0 */ + spi-max-frequency = <1000000>; + vref-supply = <&vref>; + }; }; ... diff --git a/dts/Bindings/iio/dac/maxim,max5522.yaml b/dts/Bindings/iio/dac/maxim,max5522.yaml new file mode 100644 index 0000000000..24830f56c5 --- /dev/null +++ b/dts/Bindings/iio/dac/maxim,max5522.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/dac/maxim,max5522.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim Integrated MAX5522 Dual 10-bit Voltage-Output SPI DACs + +maintainers: + - Angelo Dureghello <angelo.dureghello@timesys.com> + - Jonathan Cameron <jic23@kernel.org> + +description: | + Datasheet available at: + https://www.analog.com/en/products/max5522.html + +properties: + compatible: + const: maxim,max5522 + + reg: + maxItems: 1 + + vdd-supply: true + vrefin-supply: true + +required: + - compatible + - reg + - vrefin-supply + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + dac@0 { + compatible = "maxim,max5522"; + reg = <0>; + vrefin-supply = <&vref>; + }; + }; +... diff --git a/dts/Bindings/iio/dac/microchip,mcp4728.yaml b/dts/Bindings/iio/dac/microchip,mcp4728.yaml new file mode 100644 index 0000000000..99831d7f1c --- /dev/null +++ b/dts/Bindings/iio/dac/microchip,mcp4728.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- + +$id: http://devicetree.org/schemas/iio/dac/microchip,mcp4728.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip MCP4728 DAC + +maintainers: + - Andrea Collamati <andrea.collamati@gmail.com> + +description: | + MCP4728 is a quad channel, 12-bit voltage output + Digital-to-Analog Converter with non-volatile + memory and I2C compatible Serial Interface. + https://www.microchip.com/en-us/product/mcp4728 + +properties: + compatible: + const: microchip,mcp4728 + + reg: + maxItems: 1 + + vdd-supply: + description: | + Provides both power and acts as the reference supply on the MCP4728 + when Internal Vref is not selected. + +required: + - compatible + - reg + - vdd-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + dac@60 { + compatible = "microchip,mcp4728"; + reg = <0x60>; + vdd-supply = <&vdac_vdd>; + }; + }; diff --git a/dts/Bindings/iio/dac/microchip,mcp4821.yaml b/dts/Bindings/iio/dac/microchip,mcp4821.yaml new file mode 100644 index 0000000000..0dc577c339 --- /dev/null +++ b/dts/Bindings/iio/dac/microchip,mcp4821.yaml @@ -0,0 +1,86 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/dac/microchip,mcp4821.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip MCP4821 and similar DACs + +description: | + Supports MCP48x1 (single channel) and MCP48x2 (dual channel) series of DACs. + Device supports simplex communication over SPI in Mode 0 and Mode 3. + + +---------+--------------+-------------+ + | Device | Resolution | Channels | + |---------|--------------|-------------| + | MCP4801 | 8-bit | 1 | + | MCP4802 | 8-bit | 2 | + | MCP4811 | 10-bit | 1 | + | MCP4812 | 10-bit | 2 | + | MCP4821 | 12-bit | 1 | + | MCP4822 | 12-bit | 2 | + +---------+--------------+-------------+ + + Datasheet: + MCP48x1: https://ww1.microchip.com/downloads/en/DeviceDoc/22244B.pdf + MCP48x2: https://ww1.microchip.com/downloads/en/DeviceDoc/20002249B.pdf + +maintainers: + - Anshul Dalal <anshulusr@gmail.com> + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - microchip,mcp4801 + - microchip,mcp4802 + - microchip,mcp4811 + - microchip,mcp4812 + - microchip,mcp4821 + - microchip,mcp4822 + + reg: + maxItems: 1 + + vdd-supply: true + + ldac-gpios: + description: | + Active Low LDAC (Latch DAC Input) pin used to update the DAC output. + maxItems: 1 + + powerdown-gpios: + description: | + Active Low SHDN pin used to enter the shutdown mode. + maxItems: 1 + + spi-cpha: true + spi-cpol: true + +required: + - compatible + - reg + - vdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + dac@0 { + compatible = "microchip,mcp4821"; + reg = <0>; + vdd-supply = <&vdd_regulator>; + ldac-gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>; + powerdown-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>; + spi-cpha; + spi-cpol; + }; + }; diff --git a/dts/Bindings/iio/dac/microchip,mcp4922.yaml b/dts/Bindings/iio/dac/microchip,mcp4922.yaml index 4c430abcdb..19374401e5 100644 --- a/dts/Bindings/iio/dac/microchip,mcp4922.yaml +++ b/dts/Bindings/iio/dac/microchip,mcp4922.yaml @@ -21,17 +21,18 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - vref-supply: true -additionalProperties: false - required: - compatible - reg - vref-supply +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/dts/Bindings/iio/dac/nxp,lpc1850-dac.yaml b/dts/Bindings/iio/dac/nxp,lpc1850-dac.yaml index 595f481c54..9c8afe3f1b 100644 --- a/dts/Bindings/iio/dac/nxp,lpc1850-dac.yaml +++ b/dts/Bindings/iio/dac/nxp,lpc1850-dac.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/iio/dac/nxp,lpc1850-dac.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: NXP LPC1850 DAC bindings +title: NXP LPC1850 DAC maintainers: - Jonathan Cameron <jic23@kernel.org> diff --git a/dts/Bindings/iio/dac/st,stm32-dac.yaml b/dts/Bindings/iio/dac/st,stm32-dac.yaml index 6adeda4087..04045b932b 100644 --- a/dts/Bindings/iio/dac/st,stm32-dac.yaml +++ b/dts/Bindings/iio/dac/st,stm32-dac.yaml @@ -1,10 +1,10 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/iio/dac/st,stm32-dac.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/iio/dac/st,stm32-dac.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: STMicroelectronics STM32 DAC bindings +title: STMicroelectronics STM32 DAC description: | The STM32 DAC is a 12-bit voltage output digital-to-analog converter. The DAC diff --git a/dts/Bindings/iio/dac/ti,dac082s085.yaml b/dts/Bindings/iio/dac/ti,dac082s085.yaml index b0157050f1..201b04af2b 100644 --- a/dts/Bindings/iio/dac/ti,dac082s085.yaml +++ b/dts/Bindings/iio/dac/ti,dac082s085.yaml @@ -33,21 +33,22 @@ properties: vref-supply: description: Needed to provide output scaling. - spi-max-frequency: true - required: - compatible - reg - vref-supply -additionalProperties: false - oneOf: - required: - spi-cpha - required: - spi-cpol +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | vref_2v5_reg: regulator-vref { diff --git a/dts/Bindings/iio/dac/ti,dac5571.yaml b/dts/Bindings/iio/dac/ti,dac5571.yaml index 88298bc43b..79da0323c3 100644 --- a/dts/Bindings/iio/dac/ti,dac5571.yaml +++ b/dts/Bindings/iio/dac/ti,dac5571.yaml @@ -46,7 +46,7 @@ examples: dac@4c { compatible = "ti,dac5571"; - reg = <0x4C>; + reg = <0x4c>; vref-supply = <&vdd_supply>; }; }; diff --git a/dts/Bindings/iio/dac/ti,dac7311.yaml b/dts/Bindings/iio/dac/ti,dac7311.yaml index 10be98d1f1..a6814587db 100644 --- a/dts/Bindings/iio/dac/ti,dac7311.yaml +++ b/dts/Bindings/iio/dac/ti,dac7311.yaml @@ -24,14 +24,15 @@ properties: Reference voltage must be supplied to establish the scaling of the output voltage. - spi-max-frequency: true - required: - compatible - reg - vref-supply -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/dac/ti,dac7612.yaml b/dts/Bindings/iio/dac/ti,dac7612.yaml index d172b142f6..20dd137066 100644 --- a/dts/Bindings/iio/dac/ti,dac7612.yaml +++ b/dts/Bindings/iio/dac/ti,dac7612.yaml @@ -29,13 +29,14 @@ properties: DACs are loaded when the pin connected to this GPIO is pulled low. maxItems: 1 - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/frequency/adf4371.yaml b/dts/Bindings/iio/frequency/adf4371.yaml index 6b3a611e1c..1cb2adaf66 100644 --- a/dts/Bindings/iio/frequency/adf4371.yaml +++ b/dts/Bindings/iio/frequency/adf4371.yaml @@ -40,28 +40,29 @@ properties: output stage will shut down until the ADF4371/ADF4372 achieves lock as measured by the digital lock detect circuitry. - spi-max-frequency: true - required: - compatible - reg - clocks - clock-names -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; frequency@0 { - compatible = "adi,adf4371"; - reg = <0>; - spi-max-frequency = <1000000>; - clocks = <&adf4371_clkin>; - clock-names = "clkin"; + compatible = "adi,adf4371"; + reg = <0>; + spi-max-frequency = <1000000>; + clocks = <&adf4371_clkin>; + clock-names = "clkin"; }; }; ... diff --git a/dts/Bindings/iio/frequency/adi,adf4350.yaml b/dts/Bindings/iio/frequency/adi,adf4350.yaml index d7f20b8518..43cbf27114 100644 --- a/dts/Bindings/iio/frequency/adi,adf4350.yaml +++ b/dts/Bindings/iio/frequency/adi,adf4350.yaml @@ -160,13 +160,16 @@ properties: 2: +2dBm 3: +5dBm -additionalProperties: false - required: - compatible - reg - clocks +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/dts/Bindings/iio/frequency/adi,adf4377.yaml b/dts/Bindings/iio/frequency/adi,adf4377.yaml new file mode 100644 index 0000000000..aa6a3193b4 --- /dev/null +++ b/dts/Bindings/iio/frequency/adi,adf4377.yaml @@ -0,0 +1,92 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/frequency/adi,adf4377.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADF4377 Microwave Wideband Synthesizer with Integrated VCO + +maintainers: + - Antoniu Miclaus <antoniu.miclaus@analog.com> + - Dragos Bogdan <dragos.bogdan@analog.com> + +description: | + The ADF4377 is a high performance, ultralow jitter, dual output integer-N + phased locked loop (PLL) with integrated voltage controlled oscillator (VCO) + ideally suited for data converter and mixed signal front end (MxFE) clock + applications. + + https://www.analog.com/en/products/adf4377.html + +properties: + compatible: + enum: + - adi,adf4377 + - adi,adf4378 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 10000000 + + clocks: + maxItems: 1 + + clock-names: + description: + External clock that provides reference input frequency. + items: + - const: ref_in + + chip-enable-gpios: + description: + GPIO that controls the Chip Enable Pin. + maxItems: 1 + + clk1-enable-gpios: + description: + GPIO that controls the Enable Clock 1 Output Buffer Pin. + maxItems: 1 + + clk2-enable-gpios: + description: + GPIO that controls the Enable Clock 2 Output Buffer Pin. + maxItems: 1 + + adi,muxout-select: + description: + On chip multiplexer output selection. + high_z - MUXOUT Pin set to high-Z. + lock_detect - MUXOUT Pin set to lock detector output. + muxout_low - MUXOUT Pin set to low. + f_div_rclk_2 - MUXOUT Pin set to fDIV_RCLK/2. + f_div_nclk_2 - MUXOUT Pin set to fDIV_NCLK/2. + muxout_high - MUXOUT Pin set to high. + enum: [high_z, lock_detect, muxout_low, f_div_rclk_2, f_div_nclk_2, muxout_high] + +required: + - compatible + - reg + - clocks + - clock-names + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + frequency@0 { + compatible = "adi,adf4377"; + reg = <0>; + spi-max-frequency = <10000000>; + clocks = <&adf4377_ref_in>; + clock-names = "ref_in"; + }; + }; +... diff --git a/dts/Bindings/iio/frequency/adi,admfm2000.yaml b/dts/Bindings/iio/frequency/adi,admfm2000.yaml new file mode 100644 index 0000000000..2bcf4bbc12 --- /dev/null +++ b/dts/Bindings/iio/frequency/adi,admfm2000.yaml @@ -0,0 +1,127 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2024 Analog Devices Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/frequency/adi,admfm2000.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADMFM2000 Dual Microwave Down Converter + +maintainers: + - Kim Seer Paller <kimseer.paller@analog.com> + +description: + Dual microwave down converter module with input RF and LO frequency ranges + from 0.5 to 32 GHz and an output IF frequency range from 0.1 to 8 GHz. + It consists of a LNA, mixer, IF filter, DSA, and IF amplifier for each down + conversion path. + +properties: + compatible: + enum: + - adi,admfm2000 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + "^channel@[0-1]$": + type: object + description: Represents a channel of the device. + + additionalProperties: false + + properties: + reg: + description: + The channel number. + minimum: 0 + maximum: 1 + + adi,mixer-mode: + description: + Enable mixer mode for the channel. It downconverts RF between 5 GHz + and 32 GHz to IF between 0.5 GHz and 8 GHz. If not present, the channel + is in direct IF mode which bypasses the mixer and downconverts RF + between 2 GHz and 8 GHz to IF between 0.5 GHz and 8 GHz. + type: boolean + + switch-gpios: + description: | + GPIOs to select the RF path for the channel. The same state of CTRL-A + and CTRL-B GPIOs is not permitted. + CTRL-A CTRL-B CH1 Status CH2 Status + 1 0 Direct IF mode Mixer mode + 0 1 Mixer mode Direct IF mode + + items: + - description: CTRL-A GPIO + - description: CTRL-B GPIO + + attenuation-gpios: + description: | + Choice of attenuation: + DSA-V4 DSA-V3 DSA-V2 DSA-V1 DSA-V0 + 1 1 1 1 1 0 dB + 1 1 1 1 0 -1 dB + 1 1 1 0 1 -2 dB + 1 1 0 1 1 -4 dB + 1 0 1 1 1 -8 dB + 0 1 1 1 1 -16 dB + 0 0 0 0 0 -31 dB + + items: + - description: DSA-V0 GPIO + - description: DSA-V1 GPIO + - description: DSA-V2 GPIO + - description: DSA-V3 GPIO + - description: DSA-V4 GPIO + + required: + - reg + - switch-gpios + - attenuation-gpios + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + converter { + compatible = "adi,admfm2000"; + + #address-cells = <1>; + #size-cells = <0>; + + channel@0 { + reg = <0>; + switch-gpios = <&gpio 1 GPIO_ACTIVE_LOW>, + <&gpio 2 GPIO_ACTIVE_HIGH>; + + attenuation-gpios = <&gpio 17 GPIO_ACTIVE_LOW>, + <&gpio 22 GPIO_ACTIVE_LOW>, + <&gpio 23 GPIO_ACTIVE_LOW>, + <&gpio 24 GPIO_ACTIVE_LOW>, + <&gpio 25 GPIO_ACTIVE_LOW>; + }; + + channel@1 { + reg = <1>; + adi,mixer-mode; + switch-gpios = <&gpio 3 GPIO_ACTIVE_LOW>, + <&gpio 4 GPIO_ACTIVE_HIGH>; + + attenuation-gpios = <&gpio 0 GPIO_ACTIVE_LOW>, + <&gpio 5 GPIO_ACTIVE_LOW>, + <&gpio 6 GPIO_ACTIVE_LOW>, + <&gpio 16 GPIO_ACTIVE_LOW>, + <&gpio 26 GPIO_ACTIVE_LOW>; + }; + }; +... diff --git a/dts/Bindings/iio/frequency/adi,admv1013.yaml b/dts/Bindings/iio/frequency/adi,admv1013.yaml index 23f1f3b55a..f2eb2287ed 100644 --- a/dts/Bindings/iio/frequency/adi,admv1013.yaml +++ b/dts/Bindings/iio/frequency/adi,admv1013.yaml @@ -39,6 +39,46 @@ properties: description: Analog voltage regulator. + vcc-drv-supply: + description: + RF Driver voltage regulator. + + vcc2-drv-supply: + description: + RF predriver voltage regulator. + + vcc-vva-supply: + description: + VVA Control Circuit voltage regulator. + + vcc-amp1-supply: + description: + RF Amplifier 1 voltage regulator. + + vcc-amp2-supply: + description: + RF Amplifier 2 voltage regulator. + + vcc-env-supply: + description: + Envelope Detector voltage regulator. + + vcc-bg-supply: + description: + Mixer Chip Band Gap Circuit voltage regulator. + + vcc-bg2-supply: + description: + VGA Chip Band Gap Circuit voltage regulator. + + vcc-mixer-supply: + description: + Mixer voltage regulator. + + vcc-quad-supply: + description: + Quadruppler voltage regulator. + adi,detector-enable: description: Enable the Envelope Detector available at output pins VENV_P and @@ -69,8 +109,21 @@ required: - clocks - clock-names - vcm-supply - -additionalProperties: false + - vcc-drv-supply + - vcc2-drv-supply + - vcc-vva-supply + - vcc-amp1-supply + - vcc-amp2-supply + - vcc-env-supply + - vcc-bg-supply + - vcc-bg2-supply + - vcc-mixer-supply + - vcc-quad-supply + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | @@ -84,6 +137,16 @@ examples: clocks = <&admv1013_lo>; clock-names = "lo_in"; vcm-supply = <&vcm>; + vcc-drv-supply = <&vcc_drv>; + vcc2-drv-supply = <&vcc2_drv>; + vcc-vva-supply = <&vcc_vva>; + vcc-amp1-supply = <&vcc_amp1>; + vcc-amp2-supply = <&vcc_amp2>; + vcc-env-supply = <&vcc_env>; + vcc-bg-supply = <&vcc_bg>; + vcc-bg2-supply = <&vcc_bg2>; + vcc-mixer-supply = <&vcc_mixer>; + vcc-quad-supply = <&vcc_quad>; adi,quad-se-mode = "diff"; adi,detector-enable; }; diff --git a/dts/Bindings/iio/frequency/adi,admv1014.yaml b/dts/Bindings/iio/frequency/adi,admv1014.yaml index 2716c1e8fe..39cc63a117 100644 --- a/dts/Bindings/iio/frequency/adi,admv1014.yaml +++ b/dts/Bindings/iio/frequency/adi,admv1014.yaml @@ -33,7 +33,7 @@ properties: items: - const: lo_in description: - External clock that provides the Local Oscilator input. + External clock that provides the Local Oscillator input. vcm-supply: description: @@ -103,8 +103,19 @@ required: - clocks - clock-names - vcm-supply - -additionalProperties: false + - vcc-if-bb-supply + - vcc-vga-supply + - vcc-vva-supply + - vcc-lna-3p3-supply + - vcc-lna-1p5-supply + - vcc-bg-supply + - vcc-quad-supply + - vcc-mixer-supply + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/frequency/adi,admv4420.yaml b/dts/Bindings/iio/frequency/adi,admv4420.yaml index da7fe85ec9..64f2352aac 100644 --- a/dts/Bindings/iio/frequency/adi,admv4420.yaml +++ b/dts/Bindings/iio/frequency/adi,admv4420.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: ADMV4420 K Band Downconverter maintainers: - - Cristian Pop <cristian.pop@analog.com> + - Nuno Sá <nuno.sa@analog.com> description: The ADMV4420 is a highly integrated, double balanced, active @@ -37,7 +37,11 @@ required: - compatible - reg -additionalProperties: false + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/frequency/adi,adrf6780.yaml b/dts/Bindings/iio/frequency/adi,adrf6780.yaml index 3a8ea93f4e..f11391ab4b 100644 --- a/dts/Bindings/iio/frequency/adi,adrf6780.yaml +++ b/dts/Bindings/iio/frequency/adi,adrf6780.yaml @@ -113,7 +113,10 @@ required: - clocks - clock-names -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/gyroscope/adi,adxrs290.yaml b/dts/Bindings/iio/gyroscope/adi,adxrs290.yaml index 662ec59ca0..3d94dd4612 100644 --- a/dts/Bindings/iio/gyroscope/adi,adxrs290.yaml +++ b/dts/Bindings/iio/gyroscope/adi,adxrs290.yaml @@ -38,7 +38,10 @@ required: - spi-cpol - spi-cpha -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | @@ -47,13 +50,13 @@ examples: #address-cells = <1>; #size-cells = <0>; gyro@0 { - compatible = "adi,adxrs290"; - reg = <0>; - spi-max-frequency = <5000000>; - spi-cpol; - spi-cpha; - interrupt-parent = <&gpio>; - interrupts = <25 IRQ_TYPE_EDGE_RISING>; + compatible = "adi,adxrs290"; + reg = <0>; + spi-max-frequency = <5000000>; + spi-cpol; + spi-cpha; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; }; }; ... diff --git a/dts/Bindings/iio/gyroscope/bosch,bmg160.yaml b/dts/Bindings/iio/gyroscope/bosch,bmg160.yaml index 1414ba9977..3c6fe74af0 100644 --- a/dts/Bindings/iio/gyroscope/bosch,bmg160.yaml +++ b/dts/Bindings/iio/gyroscope/bosch,bmg160.yaml @@ -22,6 +22,9 @@ properties: vdd-supply: true vddio-supply: true + spi-max-frequency: + maximum: 10000000 + interrupts: minItems: 1 maxItems: 2 @@ -33,7 +36,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/gyroscope/nxp,fxas21002c.yaml b/dts/Bindings/iio/gyroscope/nxp,fxas21002c.yaml index 3f57a1b813..297d519d68 100644 --- a/dts/Bindings/iio/gyroscope/nxp,fxas21002c.yaml +++ b/dts/Bindings/iio/gyroscope/nxp,fxas21002c.yaml @@ -56,40 +56,43 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; gyroscope@20 { - compatible = "nxp,fxas21002c"; - reg = <0x20>; + compatible = "nxp,fxas21002c"; + reg = <0x20>; - vdd-supply = <®_peri_3p15v>; - vddio-supply = <®_peri_3p15v>; + vdd-supply = <®_peri_3p15v>; + vddio-supply = <®_peri_3p15v>; - interrupt-parent = <&gpio1>; - interrupts = <7 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "INT1"; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT1"; }; }; - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; gyroscope@0 { - compatible = "nxp,fxas21002c"; - reg = <0x0>; + compatible = "nxp,fxas21002c"; + reg = <0x0>; - spi-max-frequency = <2000000>; + spi-max-frequency = <2000000>; - interrupt-parent = <&gpio2>; - interrupts = <7 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "INT2"; + interrupt-parent = <&gpio2>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT2"; }; }; diff --git a/dts/Bindings/iio/health/ti,afe4403.yaml b/dts/Bindings/iio/health/ti,afe4403.yaml index d861526c5c..5b6cde86b5 100644 --- a/dts/Bindings/iio/health/ti,afe4403.yaml +++ b/dts/Bindings/iio/health/ti,afe4403.yaml @@ -23,16 +23,18 @@ properties: maxItems: 1 description: Connected to ADC_RDY pin. - reset-gpios: true - - spi-max-frequency: true - -additionalProperties: false + reset-gpios: + maxItems: 1 required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> @@ -41,7 +43,7 @@ examples: #address-cells = <1>; #size-cells = <0>; - heart_mon@0 { + heart-mon@0 { compatible = "ti,afe4403"; reg = <0>; spi-max-frequency = <10000000>; diff --git a/dts/Bindings/iio/health/ti,afe4404.yaml b/dts/Bindings/iio/health/ti,afe4404.yaml index c0e815d999..167d10bd60 100644 --- a/dts/Bindings/iio/health/ti,afe4404.yaml +++ b/dts/Bindings/iio/health/ti,afe4404.yaml @@ -23,7 +23,8 @@ properties: maxItems: 1 description: Connected to ADC_RDY pin. - reset-gpios: true + reset-gpios: + maxItems: 1 additionalProperties: false @@ -39,7 +40,7 @@ examples: #address-cells = <1>; #size-cells = <0>; - heart_mon@58 { + heart-mon@58 { compatible = "ti,afe4404"; reg = <0x58>; tx-supply = <&vbat>; diff --git a/dts/Bindings/iio/humidity/dht11.yaml b/dts/Bindings/iio/humidity/dht11.yaml index 2247481d02..0103f42389 100644 --- a/dts/Bindings/iio/humidity/dht11.yaml +++ b/dts/Bindings/iio/humidity/dht11.yaml @@ -34,7 +34,7 @@ additionalProperties: false examples: - | - humidity_sensor { + humidity-sensor { compatible = "dht11"; gpios = <&gpio0 6 0>; }; diff --git a/dts/Bindings/iio/humidity/ti,hdc2010.yaml b/dts/Bindings/iio/humidity/ti,hdc2010.yaml index 88384b69f9..e3eca89175 100644 --- a/dts/Bindings/iio/humidity/ti,hdc2010.yaml +++ b/dts/Bindings/iio/humidity/ti,hdc2010.yaml @@ -10,7 +10,7 @@ maintainers: - Eugene Zaikonnikov <ez@norophonic.com> description: | - Relative humidity and tempereature sensors on I2C bus + Relative humidity and temperature sensors on I2C bus Datasheets are available at: http://www.ti.com/product/HDC2010/datasheet @@ -27,6 +27,9 @@ properties: reg: maxItems: 1 + interrupts: + maxItems: 1 + required: - compatible - reg @@ -35,12 +38,12 @@ additionalProperties: false examples: - | - i2c0 { - #address-cells = <1>; - #size-cells = <0>; - - humidity@40 { - compatible = "ti,hdc2010"; - reg = <0x40>; - }; + i2c { + #address-cells = <1>; + #size-cells = <0>; + + humidity@40 { + compatible = "ti,hdc2010"; + reg = <0x40>; + }; }; diff --git a/dts/Bindings/iio/humidity/ti,hdc3020.yaml b/dts/Bindings/iio/humidity/ti,hdc3020.yaml new file mode 100644 index 0000000000..8b5dedd1a5 --- /dev/null +++ b/dts/Bindings/iio/humidity/ti,hdc3020.yaml @@ -0,0 +1,58 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/humidity/ti,hdc3020.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: HDC3020/HDC3021/HDC3022 humidity and temperature iio sensors + +maintainers: + - Li peiyu <579lpy@gmail.com> + - Javier Carrasco <javier.carrasco.cruz@gmail.com> + +description: + https://www.ti.com/lit/ds/symlink/hdc3020.pdf + + The HDC302x is an integrated capacitive based relative humidity (RH) + and temperature sensor. + +properties: + compatible: + oneOf: + - items: + - enum: + - ti,hdc3021 + - ti,hdc3022 + - const: ti,hdc3020 + - const: ti,hdc3020 + + interrupts: + maxItems: 1 + + vdd-supply: true + + reg: + maxItems: 1 + +required: + - compatible + - reg + - vdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + humidity-sensor@47 { + compatible = "ti,hdc3021", "ti,hdc3020"; + reg = <0x47>; + vdd-supply = <&vcc_3v3>; + interrupt-parent = <&gpio3>; + interrupts = <23 IRQ_TYPE_EDGE_RISING>; + }; + }; diff --git a/dts/Bindings/iio/imu/adi,adis16460.yaml b/dts/Bindings/iio/imu/adi,adis16460.yaml index 340be256f2..4cacc99487 100644 --- a/dts/Bindings/iio/imu/adi,adis16460.yaml +++ b/dts/Bindings/iio/imu/adi,adis16460.yaml @@ -25,7 +25,9 @@ properties: spi-cpol: true - spi-max-frequency: true + spi-cs-inactive-delay-ns: + minimum: 16000 + default: 16000 interrupts: maxItems: 1 @@ -35,13 +37,16 @@ required: - reg - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/Bindings/iio/imu/adi,adis16475.yaml b/dts/Bindings/iio/imu/adi,adis16475.yaml index a757421017..9b7ad609f7 100644 --- a/dts/Bindings/iio/imu/adi,adis16475.yaml +++ b/dts/Bindings/iio/imu/adi,adis16475.yaml @@ -47,6 +47,10 @@ properties: spi-max-frequency: maximum: 2000000 + spi-cs-inactive-delay-ns: + minimum: 16000 + default: 16000 + interrupts: maxItems: 1 @@ -79,6 +83,7 @@ required: - spi-cpol allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible: @@ -107,23 +112,23 @@ allOf: dependencies: adi,sync-mode: [ clocks ] -additionalProperties: false +unevaluatedProperties: false examples: - | #include <dt-bindings/interrupt-controller/irq.h> spi { - #address-cells = <1>; - #size-cells = <0>; - - adis16475: adis16475-3@0 { - compatible = "adi,adis16475-3"; - reg = <0>; - spi-cpha; - spi-cpol; - spi-max-frequency = <2000000>; - interrupts = <4 IRQ_TYPE_EDGE_RISING>; - interrupt-parent = <&gpio>; - }; + #address-cells = <1>; + #size-cells = <0>; + + adis16475: adis16475-3@0 { + compatible = "adi,adis16475-3"; + reg = <0>; + spi-cpha; + spi-cpol; + spi-max-frequency = <2000000>; + interrupts = <4 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpio>; + }; }; ... diff --git a/dts/Bindings/iio/imu/adi,adis16480.yaml b/dts/Bindings/iio/imu/adi,adis16480.yaml index dd29dc6c4c..56e0dc20f5 100644 --- a/dts/Bindings/iio/imu/adi,adis16480.yaml +++ b/dts/Bindings/iio/imu/adi,adis16480.yaml @@ -47,8 +47,6 @@ properties: - DIO3 - DIO4 - spi-max-frequency: true - spi-cpha: true spi-cpol: true @@ -96,8 +94,6 @@ properties: - DIO3 - DIO4 -additionalProperties: false - required: - compatible - reg @@ -106,6 +102,11 @@ required: - spi-cpol - spi-max-frequency +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/dts/Bindings/iio/imu/bosch,bmi160.yaml b/dts/Bindings/iio/imu/bosch,bmi160.yaml index 6e73cd889b..47cfba939c 100644 --- a/dts/Bindings/iio/imu/bosch,bmi160.yaml +++ b/dts/Bindings/iio/imu/bosch,bmi160.yaml @@ -46,13 +46,14 @@ properties: mount-matrix: description: an optional 3x3 mounting rotation matrix - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | @@ -63,16 +64,16 @@ examples: #size-cells = <0>; bmi160@68 { - compatible = "bosch,bmi160"; - reg = <0x68>; - vdd-supply = <&pm8916_l17>; - vddio-supply = <&pm8916_l6>; - interrupt-parent = <&gpio4>; - interrupts = <12 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "INT1"; - mount-matrix = "0", "1", "0", - "-1", "0", "0", - "0", "0", "1"; + compatible = "bosch,bmi160"; + reg = <0x68>; + vdd-supply = <&pm8916_l17>; + vddio-supply = <&pm8916_l6>; + interrupt-parent = <&gpio4>; + interrupts = <12 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT1"; + mount-matrix = "0", "1", "0", + "-1", "0", "0", + "0", "0", "1"; }; }; - | @@ -83,11 +84,11 @@ examples: #size-cells = <0>; bmi160@0 { - compatible = "bosch,bmi160"; - reg = <0>; - spi-max-frequency = <10000000>; - interrupt-parent = <&gpio2>; - interrupts = <12 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "INT2"; + compatible = "bosch,bmi160"; + reg = <0>; + spi-max-frequency = <10000000>; + interrupt-parent = <&gpio2>; + interrupts = <12 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT2"; }; }; diff --git a/dts/Bindings/iio/imu/bosch,bmi323.yaml b/dts/Bindings/iio/imu/bosch,bmi323.yaml new file mode 100644 index 0000000000..64ef26e196 --- /dev/null +++ b/dts/Bindings/iio/imu/bosch,bmi323.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/imu/bosch,bmi323.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bosch BMI323 6-Axis IMU + +maintainers: + - Jagath Jog J <jagathjog1996@gmail.com> + +description: + BMI323 is a 6-axis inertial measurement unit that supports acceleration and + gyroscopic measurements with hardware fifo buffering. Sensor also provides + events information such as motion, steps, orientation, single and double + tap detection. + +properties: + compatible: + const: bosch,bmi323 + + reg: + maxItems: 1 + + vdd-supply: true + vddio-supply: true + + interrupts: + minItems: 1 + maxItems: 2 + + interrupt-names: + minItems: 1 + maxItems: 2 + items: + enum: + - INT1 + - INT2 + + drive-open-drain: + description: + set if the specified interrupt pin should be configured as + open drain. If not set, defaults to push-pull. + + mount-matrix: + description: + an optional 3x3 mounting rotation matrix. + +required: + - compatible + - reg + - vdd-supply + - vddio-supply + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + // Example for I2C + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + imu@68 { + compatible = "bosch,bmi323"; + reg = <0x68>; + vddio-supply = <&vddio>; + vdd-supply = <&vdd>; + interrupt-parent = <&gpio1>; + interrupts = <29 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT1"; + }; + }; diff --git a/dts/Bindings/iio/imu/bosch,bno055.yaml b/dts/Bindings/iio/imu/bosch,bno055.yaml new file mode 100644 index 0000000000..e0d06db161 --- /dev/null +++ b/dts/Bindings/iio/imu/bosch,bno055.yaml @@ -0,0 +1,59 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/imu/bosch,bno055.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Bosch BNO055 + +maintainers: + - Andrea Merello <andrea.merello@iit.it> + +description: | + Inertial Measurement Unit with Accelerometer, Gyroscope, Magnetometer and + internal MCU for sensor fusion + https://www.bosch-sensortec.com/products/smart-sensors/bno055/ + +properties: + compatible: + enum: + - bosch,bno055 + + reg: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + clocks: + maxItems: 1 + +required: + - compatible + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + serial { + imu { + compatible = "bosch,bno055"; + reset-gpios = <&gpio0 54 GPIO_ACTIVE_LOW>; + clocks = <&imu_clk>; + }; + }; + + - | + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + imu@28 { + compatible = "bosch,bno055"; + reg = <0x28>; + reset-gpios = <&gpio0 54 GPIO_ACTIVE_LOW>; + clocks = <&imu_clk>; + }; + }; diff --git a/dts/Bindings/iio/imu/invensense,icm42600.yaml b/dts/Bindings/iio/imu/invensense,icm42600.yaml index 4c1c083d0e..7cd05bcbee 100644 --- a/dts/Bindings/iio/imu/invensense,icm42600.yaml +++ b/dts/Bindings/iio/imu/invensense,icm42600.yaml @@ -31,6 +31,7 @@ properties: - invensense,icm42602 - invensense,icm42605 - invensense,icm42622 + - invensense,icm42631 reg: maxItems: 1 @@ -47,7 +48,6 @@ properties: vddio-supply: description: Regulator that provides power to the bus - spi-max-frequency: true spi-cpha: true spi-cpol: true @@ -56,41 +56,44 @@ required: - reg - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; icm42605@68 { - compatible = "invensense,icm42605"; - reg = <0x68>; - interrupt-parent = <&gpio2>; - interrupts = <7 IRQ_TYPE_EDGE_FALLING>; - vdd-supply = <&vdd>; - vddio-supply = <&vddio>; + compatible = "invensense,icm42605"; + reg = <0x68>; + interrupt-parent = <&gpio2>; + interrupts = <7 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&vdd>; + vddio-supply = <&vddio>; }; }; - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; icm42602@0 { - compatible = "invensense,icm42602"; - reg = <0>; - spi-max-frequency = <24000000>; - spi-cpha; - spi-cpol; - interrupt-parent = <&gpio1>; - interrupts = <2 IRQ_TYPE_EDGE_FALLING>; - vdd-supply = <&vdd>; - vddio-supply = <&vddio>; + compatible = "invensense,icm42602"; + reg = <0>; + spi-max-frequency = <24000000>; + spi-cpha; + spi-cpol; + interrupt-parent = <&gpio1>; + interrupts = <2 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&vdd>; + vddio-supply = <&vddio>; }; }; diff --git a/dts/Bindings/iio/imu/invensense,mpu6050.yaml b/dts/Bindings/iio/imu/invensense,mpu6050.yaml index 3ebc6526d8..297b8a1a7f 100644 --- a/dts/Bindings/iio/imu/invensense,mpu6050.yaml +++ b/dts/Bindings/iio/imu/invensense,mpu6050.yaml @@ -31,6 +31,9 @@ properties: - invensense,mpu9250 - invensense,mpu9255 - items: + - const: invensense,icm20600 + - const: invensense,icm20602 + - items: - const: invensense,icm20608d - const: invensense,icm20608 @@ -40,13 +43,16 @@ properties: interrupts: maxItems: 1 - spi-max-frequency: true - vdd-supply: true vddio-supply: true mount-matrix: true + invensense,level-shifter: + type: boolean + description: | + From ancient platform data struct: false: VLogic, true: VDD + i2c-gate: $ref: /schemas/i2c/i2c-controller.yaml unevaluatedProperties: false @@ -54,6 +60,7 @@ properties: These devices also support an auxiliary i2c bus via an i2c-gate. allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: not: properties: @@ -67,7 +74,7 @@ allOf: properties: i2c-gate: false -additionalProperties: false +unevaluatedProperties: false required: - compatible diff --git a/dts/Bindings/iio/imu/nxp,fxos8700.yaml b/dts/Bindings/iio/imu/nxp,fxos8700.yaml index 0203b83b85..688100b240 100644 --- a/dts/Bindings/iio/imu/nxp,fxos8700.yaml +++ b/dts/Bindings/iio/imu/nxp,fxos8700.yaml @@ -36,45 +36,46 @@ properties: drive-open-drain: type: boolean - spi-max-frequency: true - required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; fxos8700@1e { - compatible = "nxp,fxos8700"; - reg = <0x1e>; + compatible = "nxp,fxos8700"; + reg = <0x1e>; - interrupt-parent = <&gpio2>; - interrupts = <7 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "INT1"; + interrupt-parent = <&gpio2>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT1"; }; }; - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; fxos8700@0 { - compatible = "nxp,fxos8700"; - reg = <0>; + compatible = "nxp,fxos8700"; + reg = <0>; - spi-max-frequency = <1000000>; - interrupt-parent = <&gpio1>; - interrupts = <7 IRQ_TYPE_EDGE_RISING>; - interrupt-names = "INT2"; + spi-max-frequency = <1000000>; + interrupt-parent = <&gpio1>; + interrupts = <7 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "INT2"; }; }; diff --git a/dts/Bindings/iio/imu/st,lsm6dsx.yaml b/dts/Bindings/iio/imu/st,lsm6dsx.yaml index 5d4839f008..c48a96d17f 100644 --- a/dts/Bindings/iio/imu/st,lsm6dsx.yaml +++ b/dts/Bindings/iio/imu/st,lsm6dsx.yaml @@ -32,9 +32,25 @@ properties: - st,lsm6dsrx - st,lsm6dst - st,lsm6dsop + - st,lsm6dsv + - st,lsm6dso16is - items: - - const: st,asm330lhhx + - enum: + - st,asm330lhhx + - st,asm330lhhxg1 - const: st,lsm6dsr + - items: + - const: st,lsm6dstx + - const: st,lsm6dst + - items: + - const: st,lsm6dsv16x + - const: st,lsm6dsv + - items: + - const: st,ism330is + - const: st,lsm6dso16is + - items: + - const: st,asm330lhb + - const: st,asm330lhh reg: maxItems: 1 @@ -45,8 +61,6 @@ properties: description: Supports up to 2 interrupt lines via the INT1 and INT2 pins. - spi-max-frequency: true - vdd-supply: description: if defined provides VDD power to the sensor. @@ -54,7 +68,7 @@ properties: description: if defined provides VDD IO power to the sensor. st,drdy-int-pin: - $ref: '/schemas/types.yaml#/definitions/uint32' + $ref: /schemas/types.yaml#/definitions/uint32 description: | The pin on the package that will be used to signal data ready enum: @@ -81,12 +95,19 @@ properties: wakeup-source: $ref: /schemas/types.yaml#/definitions/flag -additionalProperties: false + mount-matrix: + description: an optional 3x3 mounting rotation matrix required: - compatible - reg +allOf: + - $ref: /schemas/iio/iio.yaml# + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> diff --git a/dts/Bindings/iio/light/ams,as73211.yaml b/dts/Bindings/iio/light/ams,as73211.yaml index 0e8cd02759..062a038aa0 100644 --- a/dts/Bindings/iio/light/ams,as73211.yaml +++ b/dts/Bindings/iio/light/ams,as73211.yaml @@ -4,19 +4,22 @@ $id: http://devicetree.org/schemas/iio/light/ams,as73211.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: AMS AS73211 JENCOLOR(R) Digital XYZ Sensor +title: AMS AS73211 JENCOLOR(R) Digital XYZ Sensor and AMS AS7331 UV Sensor maintainers: - Christian Eggers <ceggers@arri.de> description: | - XYZ True Color Sensor with I2C Interface + AMS AS73211 XYZ True Color Sensor with I2C Interface https://ams.com/documents/20143/36005/AS73211_DS000556_3-01.pdf/a65474c0-b302-c2fd-e30a-c98df87616df + AMS AS7331 UVA, UVB and UVC Sensor with I2C Interface + https://ams.com/documents/20143/9106314/AS7331_DS001047_4-00.pdf properties: compatible: enum: - ams,as73211 + - ams,as7331 reg: description: diff --git a/dts/Bindings/iio/light/liteon,ltr390.yaml b/dts/Bindings/iio/light/liteon,ltr390.yaml new file mode 100644 index 0000000000..5d98ef2af7 --- /dev/null +++ b/dts/Bindings/iio/light/liteon,ltr390.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/liteon,ltr390.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Lite-On LTR390 ALS and UV Sensor + +description: | + The Lite-On LTR390 is an ALS (Ambient Light Sensor) and a UV sensor in a + single package with i2c address of 0x53. + + Datasheet: + https://optoelectronics.liteon.com/upload/download/DS86-2015-0004/LTR-390UV_Final_%20DS_V1%201.pdf + +maintainers: + - Anshul Dalal <anshulusr@gmail.com> + +properties: + compatible: + enum: + - liteon,ltr390 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + description: | + Level interrupt pin with open drain output. + The sensor pulls this pin low when the measured reading is greater than + some configured threshold. + + vdd-supply: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@53 { + compatible = "liteon,ltr390"; + reg = <0x53>; + interrupts = <18 IRQ_TYPE_EDGE_FALLING>; + vdd-supply = <&vdd_regulator>; + }; + }; diff --git a/dts/Bindings/iio/light/liteon,ltrf216a.yaml b/dts/Bindings/iio/light/liteon,ltrf216a.yaml new file mode 100644 index 0000000000..7de1b0e721 --- /dev/null +++ b/dts/Bindings/iio/light/liteon,ltrf216a.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/liteon,ltrf216a.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: LTRF216A Ambient Light Sensor + +maintainers: + - Shreeya Patel <shreeya.patel@collabora.com> + +description: + Ambient light sensing with an i2c interface. + +properties: + compatible: + const: liteon,ltrf216a + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: + description: Regulator that provides power to the sensor. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@53 { + compatible = "liteon,ltrf216a"; + reg = <0x53>; + vdd-supply = <&vdd_regulator>; + interrupt-parent = <&gpio0>; + interrupts = <5 IRQ_TYPE_LEVEL_LOW>; + }; + }; diff --git a/dts/Bindings/iio/light/rohm,bu27008.yaml b/dts/Bindings/iio/light/rohm,bu27008.yaml new file mode 100644 index 0000000000..4f66fd47b0 --- /dev/null +++ b/dts/Bindings/iio/light/rohm,bu27008.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/rohm,bu27008.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BU27008 color sensor + +maintainers: + - Matti Vaittinen <mazziesaccount@gmail.com> + +description: + The ROHM BU27008 is a sensor with 5 photodiodes (red, green, blue, clear + and IR) with four configurable channels. Red and green being always + available and two out of the rest three (blue, clear, IR) can be + selected to be simultaneously measured. Typical application is adjusting + LCD backlight of TVs, mobile phones and tablet PCs. + +properties: + compatible: + const: rohm,bu27008 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@38 { + compatible = "rohm,bu27008"; + reg = <0x38>; + }; + }; + +... diff --git a/dts/Bindings/iio/light/rohm,bu27010.yaml b/dts/Bindings/iio/light/rohm,bu27010.yaml new file mode 100644 index 0000000000..bed42d5d0d --- /dev/null +++ b/dts/Bindings/iio/light/rohm,bu27010.yaml @@ -0,0 +1,50 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/rohm,bu27010.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BU27010 color sensor + +maintainers: + - Matti Vaittinen <mazziesaccount@gmail.com> + +description: | + The ROHM BU27010 is a sensor with 6 photodiodes (red, green, blue, clear, + IR and flickering detection) with five configurable channels. Red, green + and flickering detection being always available and two out of the rest + three (blue, clear, IR) can be selected to be simultaneously measured. + Typical application is adjusting LCD/OLED backlight of TVs, mobile phones + and tablet PCs. + +properties: + compatible: + const: rohm,bu27010 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + - vdd-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@38 { + compatible = "rohm,bu27010"; + reg = <0x38>; + vdd-supply = <&vdd>; + }; + }; diff --git a/dts/Bindings/iio/light/rohm,bu27034.yaml b/dts/Bindings/iio/light/rohm,bu27034.yaml new file mode 100644 index 0000000000..30a109a1bf --- /dev/null +++ b/dts/Bindings/iio/light/rohm,bu27034.yaml @@ -0,0 +1,46 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/rohm,bu27034.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BU27034 ambient light sensor + +maintainers: + - Matti Vaittinen <mazziesaccount@gmail.com> + +description: | + ROHM BU27034 is an ambient light sesnor with 3 channels and 3 photo diodes + capable of detecting a very wide range of illuminance. Typical application + is adjusting LCD and backlight power of TVs and mobile phones. + https://fscdn.rohm.com/en/products/databook/datasheet/ic/sensor/light/bu27034nuc-e.pdf + +properties: + compatible: + const: rohm,bu27034 + + reg: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@38 { + compatible = "rohm,bu27034"; + reg = <0x38>; + vdd-supply = <&vdd>; + }; + }; + +... diff --git a/dts/Bindings/iio/light/ti,opt4001.yaml b/dts/Bindings/iio/light/ti,opt4001.yaml new file mode 100644 index 0000000000..12b0c7ed5d --- /dev/null +++ b/dts/Bindings/iio/light/ti,opt4001.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/ti,opt4001.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments OPT4001 Ambient Light Sensor + +maintainers: + - Stefan Windfeldt-Prytz <stefan.windfeldt-prytz@axis.com> + +description: + Ambient light sensor with an i2c interface. + Last part of compatible is for the packaging used. + Picostar is a 4 pinned SMT and sot-5x3 is a 8 pinned SOT. + https://www.ti.com/lit/gpn/opt4001 + +properties: + compatible: + enum: + - ti,opt4001-picostar + - ti,opt4001-sot-5x3 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: + description: Regulator that provides power to the sensor + +required: + - compatible + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: ti,opt4001-sot-5x3 + then: + properties: + interrupts: + maxItems: 1 + else: + properties: + interrupts: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + light-sensor@44 { + compatible = "ti,opt4001-sot-5x3"; + reg = <0x44>; + vdd-supply = <&vdd_reg>; + interrupt-parent = <&gpio1>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; + }; + }; +... diff --git a/dts/Bindings/iio/light/vishay,veml6075.yaml b/dts/Bindings/iio/light/vishay,veml6075.yaml new file mode 100644 index 0000000000..91c318746b --- /dev/null +++ b/dts/Bindings/iio/light/vishay,veml6075.yaml @@ -0,0 +1,40 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/light/vishay,veml6075.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Vishay VEML6075 UVA and UVB sensor + +maintainers: + - Javier Carrasco <javier.carrasco.cruz@gmail.com> + +properties: + compatible: + const: vishay,veml6075 + + reg: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + - vdd-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + uv-sensor@10 { + compatible = "vishay,veml6075"; + reg = <0x10>; + vdd-supply = <&vdd_reg>; + }; + }; +... diff --git a/dts/Bindings/iio/magnetometer/ti,tmag5273.yaml b/dts/Bindings/iio/magnetometer/ti,tmag5273.yaml new file mode 100644 index 0000000000..121d540b7b --- /dev/null +++ b/dts/Bindings/iio/magnetometer/ti,tmag5273.yaml @@ -0,0 +1,75 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/magnetometer/ti,tmag5273.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TMAG5273 Low-Power Linear 3D Hall-Effect Sensor + +maintainers: + - Gerald Loacker <gerald.loacker@wolfvision.net> + +description: + The TI TMAG5273 is a low-power linear 3D Hall-effect sensor. This device + integrates three independent Hall-effect sensors in the X, Y, and Z axes. + The device has an integrated temperature sensor available. The TMAG5273 + can be configured through the I2C interface to enable any combination of + magnetic axes and temperature measurements. An integrated angle calculation + engine (CORDIC) provides full 360° angular position information for both + on-axis and off-axis angle measurement topologies. The angle calculation is + performed using two user-selected magnetic axes. + +properties: + compatible: + const: ti,tmag5273 + + reg: + maxItems: 1 + + "#io-channel-cells": + const: 1 + + ti,angle-measurement: + $ref: /schemas/types.yaml#/definitions/string + description: + Enables angle measurement in the selected plane. + If not specified, "x-y" will be anables as default. + enum: + - off + - x-y + - y-z + - x-z + + vcc-supply: + description: + A regulator providing 1.7 V to 3.6 V supply voltage on the VCC pin, + typically 3.3 V. + + interrupts: + description: + The low active interrupt can be configured to be fixed width or latched. + Interrupt events can be configured to be generated from magnetic + thresholds or when a conversion is completed. + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + magnetometer@35 { + compatible = "ti,tmag5273"; + reg = <0x35>; + #io-channel-cells = <1>; + ti,angle-measurement = "x-z"; + vcc-supply = <&vcc3v3>; + }; + }; +... diff --git a/dts/Bindings/iio/magnetometer/voltafield,af8133j.yaml b/dts/Bindings/iio/magnetometer/voltafield,af8133j.yaml new file mode 100644 index 0000000000..b6ab01a691 --- /dev/null +++ b/dts/Bindings/iio/magnetometer/voltafield,af8133j.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/magnetometer/voltafield,af8133j.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Voltafield AF8133J magnetometer sensor + +maintainers: + - Ondřej Jirman <megi@xff.cz> + +properties: + compatible: + const: voltafield,af8133j + + reg: + maxItems: 1 + + reset-gpios: + description: + A signal for active low reset input of the sensor. (optional; if not + used, software reset over I2C will be used instead) + + avdd-supply: + description: + A regulator that provides AVDD power (Working power, usually 3.3V) to + the sensor. + + dvdd-supply: + description: + A regulator that provides DVDD power (Digital IO power, 1.8V - AVDD) + to the sensor. + + mount-matrix: + description: An optional 3x3 mounting rotation matrix. + +required: + - compatible + - reg + - avdd-supply + - dvdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + magnetometer@1c { + compatible = "voltafield,af8133j"; + reg = <0x1c>; + avdd-supply = <®_dldo1>; + dvdd-supply = <®_dldo1>; + reset-gpios = <&pio 1 1 GPIO_ACTIVE_LOW>; + }; + }; diff --git a/dts/Bindings/iio/magnetometer/yamaha,yas530.yaml b/dts/Bindings/iio/magnetometer/yamaha,yas530.yaml index 9438fffaf0..877226e921 100644 --- a/dts/Bindings/iio/magnetometer/yamaha,yas530.yaml +++ b/dts/Bindings/iio/magnetometer/yamaha,yas530.yaml @@ -91,12 +91,12 @@ examples: #size-cells = <0>; magnetometer@2e { - compatible = "yamaha,yas530"; - reg = <0x2e>; - vdd-supply = <&ldo1_reg>; - iovdd-supply = <&ldo2_reg>; - reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>; - interrupts = <13 IRQ_TYPE_EDGE_RISING>; + compatible = "yamaha,yas530"; + reg = <0x2e>; + vdd-supply = <&ldo1_reg>; + iovdd-supply = <&ldo2_reg>; + reset-gpios = <&gpio6 12 GPIO_ACTIVE_LOW>; + interrupts = <13 IRQ_TYPE_EDGE_RISING>; }; }; @@ -105,8 +105,8 @@ examples: #size-cells = <0>; magnetometer@2e { - compatible = "yamaha,yas539"; - reg = <0x2e>; - vdd-supply = <&ldo1_reg>; + compatible = "yamaha,yas539"; + reg = <0x2e>; + vdd-supply = <&ldo1_reg>; }; }; diff --git a/dts/Bindings/iio/multiplexer/io-channel-mux.yaml b/dts/Bindings/iio/multiplexer/io-channel-mux.yaml index 611ad4444c..c55831b60e 100644 --- a/dts/Bindings/iio/multiplexer/io-channel-mux.yaml +++ b/dts/Bindings/iio/multiplexer/io-channel-mux.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/iio/multiplexer/io-channel-mux.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: I/O channel multiplexer bindings +title: I/O channel multiplexer maintainers: - Peter Rosin <peda@axentia.se> diff --git a/dts/Bindings/iio/potentiometer/adi,ad5272.yaml b/dts/Bindings/iio/potentiometer/adi,ad5272.yaml index 0ebb6725a1..b8d7083c97 100644 --- a/dts/Bindings/iio/potentiometer/adi,ad5272.yaml +++ b/dts/Bindings/iio/potentiometer/adi,ad5272.yaml @@ -44,7 +44,7 @@ examples: potentiometer@2f { compatible = "adi,ad5272-020"; - reg = <0x2F>; + reg = <0x2f>; reset-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; }; }; diff --git a/dts/Bindings/iio/potentiometer/microchip,mcp41010.yaml b/dts/Bindings/iio/potentiometer/microchip,mcp41010.yaml index 567697d996..87e88f2a99 100644 --- a/dts/Bindings/iio/potentiometer/microchip,mcp41010.yaml +++ b/dts/Bindings/iio/potentiometer/microchip,mcp41010.yaml @@ -25,14 +25,15 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/dts/Bindings/iio/potentiometer/microchip,mcp4131.yaml b/dts/Bindings/iio/potentiometer/microchip,mcp4131.yaml index 32e92bced8..896fe0b5ed 100644 --- a/dts/Bindings/iio/potentiometer/microchip,mcp4131.yaml +++ b/dts/Bindings/iio/potentiometer/microchip,mcp4131.yaml @@ -80,14 +80,15 @@ properties: reg: maxItems: 1 - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/dts/Bindings/iio/potentiometer/renesas,x9250.yaml b/dts/Bindings/iio/potentiometer/renesas,x9250.yaml new file mode 100644 index 0000000000..ab5c09c00f --- /dev/null +++ b/dts/Bindings/iio/potentiometer/renesas,x9250.yaml @@ -0,0 +1,78 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/potentiometer/renesas,x9250.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas X9250 quad potentiometers + +maintainers: + - Herve Codina <herve.codina@bootlin.com> + +description: + The Renesas X9250 integrates four digitally controlled potentiometers. + On each potentiometer, the X9250T has a 100 kOhms total resistance and the + X9250U has a 50 kOhms total resistance. + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml + +properties: + compatible: + enum: + - renesas,x9250t + - renesas,x9250u + + reg: + maxItems: 1 + + vcc-supply: + description: + Regulator for the VCC power supply. + + avp-supply: + description: + Regulator for the analog V+ power supply. + + avn-supply: + description: + Regulator for the analog V- power supply. + + '#io-channel-cells': + const: 1 + + spi-max-frequency: + maximum: 2000000 + + wp-gpios: + maxItems: 1 + description: + GPIO connected to the write-protect pin. + +required: + - compatible + - reg + - vcc-supply + - avp-supply + - avn-supply + - '#io-channel-cells' + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + potentiometer@0 { + compatible = "renesas,x9250t"; + reg = <0>; + vcc-supply = <&vcc_regulator>; + avp-supply = <&avp_regulator>; + avn-supply = <&avp_regulator>; + wp-gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + spi-max-frequency = <2000000>; + #io-channel-cells = <1>; + }; + }; diff --git a/dts/Bindings/iio/pressure/asc,dlhl60d.yaml b/dts/Bindings/iio/pressure/asc,dlhl60d.yaml index be2be4b556..9fb8d773ef 100644 --- a/dts/Bindings/iio/pressure/asc,dlhl60d.yaml +++ b/dts/Bindings/iio/pressure/asc,dlhl60d.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: All Sensors DLH series low voltage digital pressure sensors maintainers: - - Tomislav Denis <tomislav.denis@avl.com> + - Jonathan Cameron <jic23@kernel.org> description: | Bindings for the All Sensors DLH series pressure sensors. @@ -39,7 +39,7 @@ examples: - | #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/Bindings/iio/pressure/bmp085.yaml b/dts/Bindings/iio/pressure/bmp085.yaml index 49257f9251..6fda887ee9 100644 --- a/dts/Bindings/iio/pressure/bmp085.yaml +++ b/dts/Bindings/iio/pressure/bmp085.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/iio/pressure/bmp085.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: BMP085/BMP180/BMP280/BME280 pressure iio sensors +title: BMP085/BMP180/BMP280/BME280/BMP380 pressure iio sensors maintainers: - Andreas Klinger <ak@it-klinger.de> @@ -16,6 +16,8 @@ description: | https://www.bosch-sensortec.com/bst/products/all_products/bmp180 https://www.bosch-sensortec.com/bst/products/all_products/bmp280 https://www.bosch-sensortec.com/bst/products/all_products/bme280 + https://www.bosch-sensortec.com/bst/products/all_products/bmp380 + https://www.bosch-sensortec.com/bst/products/all_products/bmp580 properties: compatible: @@ -24,6 +26,8 @@ properties: - bosch,bmp180 - bosch,bmp280 - bosch,bme280 + - bosch,bmp380 + - bosch,bmp580 reg: maxItems: 1 @@ -58,16 +62,16 @@ examples: - | #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { - #address-cells = <1>; - #size-cells = <0>; - pressure@77 { - compatible = "bosch,bmp085"; - reg = <0x77>; - interrupt-parent = <&gpio0>; - interrupts = <25 IRQ_TYPE_EDGE_RISING>; - reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; - vddd-supply = <&foo>; - vdda-supply = <&bar>; - }; + i2c { + #address-cells = <1>; + #size-cells = <0>; + pressure@77 { + compatible = "bosch,bmp085"; + reg = <0x77>; + interrupt-parent = <&gpio0>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; + vddd-supply = <&foo>; + vdda-supply = <&bar>; + }; }; diff --git a/dts/Bindings/iio/pressure/honeywell,hsc030pa.yaml b/dts/Bindings/iio/pressure/honeywell,hsc030pa.yaml new file mode 100644 index 0000000000..89977b9f01 --- /dev/null +++ b/dts/Bindings/iio/pressure/honeywell,hsc030pa.yaml @@ -0,0 +1,145 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/honeywell,hsc030pa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Honeywell TruStability HSC and SSC pressure sensor series + +description: | + support for Honeywell TruStability HSC and SSC digital pressure sensor + series. + + These sensors have either an I2C, an SPI or an analog interface. Only the + digital versions are supported by this driver. + + There are 118 models with different pressure ranges available in each family. + The vendor calls them "HSC series" and "SSC series". All of them have an + identical programming model but differ in pressure range, unit and transfer + function. + + To support different models one needs to specify the pressure range as well + as the transfer function. Pressure range can either be provided via + pressure-triplet (directly extracted from the part number) or in case it's + a custom chip via numerical range limits converted to pascals. + + The transfer function defines the ranges of raw conversion values delivered + by the sensor. pmin-pascal and pmax-pascal corespond to the minimum and + maximum pressure that can be measured. + + Please note that in case of an SPI-based sensor, the clock signal should not + exceed 800kHz and the MOSI signal is not required. + + Specifications about the devices can be found at: + https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-hsc-series/documents/sps-siot-trustability-hsc-series-high-accuracy-board-mount-pressure-sensors-50099148-a-en-ciid-151133.pdf + https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/products/sensors/pressure-sensors/board-mount-pressure-sensors/trustability-ssc-series/documents/sps-siot-trustability-ssc-series-standard-accuracy-board-mount-pressure-sensors-50099533-a-en-ciid-151134.pdf + +maintainers: + - Petre Rodan <petre.rodan@subdimension.ro> + +properties: + compatible: + const: honeywell,hsc030pa + + reg: + maxItems: 1 + + honeywell,transfer-function: + description: | + Transfer function which defines the range of valid values delivered by + the sensor. + 0 - A, 10% to 90% of 2^14 + 1 - B, 5% to 95% of 2^14 + 2 - C, 5% to 85% of 2^14 + 3 - F, 4% to 94% of 2^14 + enum: [0, 1, 2, 3] + $ref: /schemas/types.yaml#/definitions/uint32 + + honeywell,pressure-triplet: + description: | + Case-sensitive five character string that defines pressure range, unit + and type as part of the device nomenclature. In the unlikely case of a + custom chip, set to "NA" and provide pmin-pascal and pmax-pascal. + enum: [001BA, 1.6BA, 2.5BA, 004BA, 006BA, 010BA, 1.6MD, 2.5MD, 004MD, + 006MD, 010MD, 016MD, 025MD, 040MD, 060MD, 100MD, 160MD, 250MD, + 400MD, 600MD, 001BD, 1.6BD, 2.5BD, 004BD, 2.5MG, 004MG, 006MG, + 010MG, 016MG, 025MG, 040MG, 060MG, 100MG, 160MG, 250MG, 400MG, + 600MG, 001BG, 1.6BG, 2.5BG, 004BG, 006BG, 010BG, 100KA, 160KA, + 250KA, 400KA, 600KA, 001GA, 160LD, 250LD, 400LD, 600LD, 001KD, + 1.6KD, 2.5KD, 004KD, 006KD, 010KD, 016KD, 025KD, 040KD, 060KD, + 100KD, 160KD, 250KD, 400KD, 250LG, 400LG, 600LG, 001KG, 1.6KG, + 2.5KG, 004KG, 006KG, 010KG, 016KG, 025KG, 040KG, 060KG, 100KG, + 160KG, 250KG, 400KG, 600KG, 001GG, 015PA, 030PA, 060PA, 100PA, + 150PA, 0.5ND, 001ND, 002ND, 004ND, 005ND, 010ND, 020ND, 030ND, + 001PD, 005PD, 015PD, 030PD, 060PD, 001NG, 002NG, 004NG, 005NG, + 010NG, 020NG, 030NG, 001PG, 005PG, 015PG, 030PG, 060PG, 100PG, + 150PG, NA] + $ref: /schemas/types.yaml#/definitions/string + + honeywell,pmin-pascal: + description: | + Minimum pressure value the sensor can measure in pascal. + To be specified only if honeywell,pressure-triplet is set to "NA". + + honeywell,pmax-pascal: + description: | + Maximum pressure value the sensor can measure in pascal. + To be specified only if honeywell,pressure-triplet is set to "NA". + + vdd-supply: + description: + Provide VDD power to the sensor (either 3.3V or 5V depending on the chip) + + spi-max-frequency: + maximum: 800000 + +required: + - compatible + - reg + - honeywell,transfer-function + - honeywell,pressure-triplet + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml + +additionalProperties: false + +dependentSchemas: + honeywell,pmin-pascal: + properties: + honeywell,pressure-triplet: + const: NA + honeywell,pmax-pascal: + properties: + honeywell,pressure-triplet: + const: NA + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pressure@28 { + compatible = "honeywell,hsc030pa"; + reg = <0x28>; + honeywell,transfer-function = <0>; + honeywell,pressure-triplet = "030PA"; + }; + }; + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + pressure@0 { + compatible = "honeywell,hsc030pa"; + reg = <0>; + spi-max-frequency = <800000>; + honeywell,transfer-function = <0>; + honeywell,pressure-triplet = "NA"; + honeywell,pmin-pascal = <0>; + honeywell,pmax-pascal = <200000>; + }; + }; +... diff --git a/dts/Bindings/iio/pressure/honeywell,mprls0025pa.yaml b/dts/Bindings/iio/pressure/honeywell,mprls0025pa.yaml new file mode 100644 index 0000000000..6994b30015 --- /dev/null +++ b/dts/Bindings/iio/pressure/honeywell,mprls0025pa.yaml @@ -0,0 +1,158 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/honeywell,mprls0025pa.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Honeywell mprls0025pa pressure sensor + +maintainers: + - Andreas Klinger <ak@it-klinger.de> + - Petre Rodan <petre.rodan@subdimension.ro> + +description: | + Honeywell pressure sensor of model mprls0025pa. + + This sensor has an I2C and SPI interface. + + There are many models with different pressure ranges available. The vendor + calls them "mpr series". All of them have the identical programming model and + differ in the pressure range, unit and transfer function. + + To support different models one need to specify its pressure triplet as well + as the transfer function. + + For custom silicon chips not covered by the Honeywell MPR series datasheet, + the pressure values can be specified manually via honeywell,pmin-pascal and + honeywell,pmax-pascal. + The minimal range value stands for the minimum pressure and the maximum value + also for the maximum pressure with linear relation inside the range. + + The transfer function defines the ranges of numerical values delivered by the + sensor. + + Specifications about the devices can be found at: + https://prod-edam.honeywell.com/content/dam/honeywell-edam/sps/siot/en-us/ + products/sensors/pressure-sensors/board-mount-pressure-sensors/ + micropressure-mpr-series/documents/ + sps-siot-mpr-series-datasheet-32332628-ciid-172626.pdf + +properties: + compatible: + const: honeywell,mprls0025pa + + reg: + maxItems: 1 + + interrupts: + description: + Optional interrupt for indicating End-of-conversion. + If not present, the driver loops for a while until the received status + byte indicates correct measurement. + maxItems: 1 + + reset-gpios: + description: + Optional GPIO for resetting the device. + If not present the device is not reset during the probe. + maxItems: 1 + + honeywell,transfer-function: + description: | + Transfer function which defines the range of valid values delivered by the + sensor. + 1 - A, 10% to 90% of 2^24 (1677722 .. 15099494) + 2 - B, 2.5% to 22.5% of 2^24 (419430 .. 3774874) + 3 - C, 20% to 80% of 2^24 (3355443 .. 13421773) + enum: [1, 2, 3] + $ref: /schemas/types.yaml#/definitions/uint32 + + honeywell,pressure-triplet: + description: | + Case-sensitive five character string that defines pressure range, unit + and type as part of the device nomenclature. In the unlikely case of a + custom chip, unset and provide pmin-pascal and pmax-pascal instead. + enum: [0001BA, 01.6BA, 02.5BA, 0060MG, 0100MG, 0160MG, 0250MG, 0400MG, + 0600MG, 0001BG, 01.6BG, 02.5BG, 0100KA, 0160KA, 0250KA, 0006KG, + 0010KG, 0016KG, 0025KG, 0040KG, 0060KG, 0100KG, 0160KG, 0250KG, + 0015PA, 0025PA, 0030PA, 0001PG, 0005PG, 0015PG, 0030PG, 0300YG] + $ref: /schemas/types.yaml#/definitions/string + + honeywell,pmin-pascal: + description: + Minimum pressure value the sensor can measure in pascal. + + honeywell,pmax-pascal: + description: + Maximum pressure value the sensor can measure in pascal. + + spi-max-frequency: + maximum: 800000 + + vdd-supply: + description: provide VDD power to the sensor. + +required: + - compatible + - reg + - honeywell,transfer-function + - vdd-supply + +oneOf: + - required: + - honeywell,pressure-triplet + - required: + - honeywell,pmin-pascal + - honeywell,pmax-pascal + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml + - if: + required: + - honeywell,pressure-triplet + then: + properties: + honeywell,pmin-pascal: false + honeywell,pmax-pascal: false + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pressure@18 { + compatible = "honeywell,mprls0025pa"; + reg = <0x18>; + reset-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio3>; + interrupts = <21 IRQ_TYPE_EDGE_RISING>; + + honeywell,pressure-triplet = "0025PA"; + honeywell,transfer-function = <1>; + vdd-supply = <&vcc_3v3>; + }; + }; + - | + spi { + #address-cells = <1>; + #size-cells = <0>; + + pressure@0 { + compatible = "honeywell,mprls0025pa"; + reg = <0>; + spi-max-frequency = <800000>; + reset-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>; + interrupt-parent = <&gpio0>; + interrupts = <30 IRQ_TYPE_EDGE_RISING>; + + honeywell,pressure-triplet = "0015PA"; + honeywell,transfer-function = <1>; + vdd-supply = <&vcc_3v3>; + }; + }; +... diff --git a/dts/Bindings/iio/pressure/meas,ms5611.yaml b/dts/Bindings/iio/pressure/meas,ms5611.yaml index 4f06707450..21e6ddb7f4 100644 --- a/dts/Bindings/iio/pressure/meas,ms5611.yaml +++ b/dts/Bindings/iio/pressure/meas,ms5611.yaml @@ -30,7 +30,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | @@ -52,6 +55,7 @@ examples: compatible = "meas,ms5611"; reg = <0>; vdd-supply = <&ldo_3v3_gnss>; + spi-max-frequency = <20000000>; }; }; ... diff --git a/dts/Bindings/iio/pressure/murata,zpa2326.yaml b/dts/Bindings/iio/pressure/murata,zpa2326.yaml index d6103be034..c33640ddde 100644 --- a/dts/Bindings/iio/pressure/murata,zpa2326.yaml +++ b/dts/Bindings/iio/pressure/murata,zpa2326.yaml @@ -33,7 +33,10 @@ required: - compatible - reg -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/pressure/rohm,bm1390.yaml b/dts/Bindings/iio/pressure/rohm,bm1390.yaml new file mode 100644 index 0000000000..7c4ca6322b --- /dev/null +++ b/dts/Bindings/iio/pressure/rohm,bm1390.yaml @@ -0,0 +1,52 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/pressure/rohm,bm1390.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ROHM BM1390 pressure sensor + +maintainers: + - Matti Vaittinen <mazziesaccount@gmail.com> + +description: + BM1390GLV-Z is a pressure sensor which performs internal temperature + compensation for the MEMS. Pressure range is from 300 hPa to 1300 hPa + and sample averaging and IIR filtering is built in. Temperature + measurement is also supported. + +properties: + compatible: + const: rohm,bm1390glv-z + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vdd-supply: true + +required: + - compatible + - reg + - vdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + pressure-sensor@5d { + compatible = "rohm,bm1390glv-z"; + reg = <0x5d>; + + interrupt-parent = <&gpio1>; + interrupts = <29 IRQ_TYPE_LEVEL_LOW>; + + vdd-supply = <&vdd>; + }; + }; diff --git a/dts/Bindings/iio/proximity/ams,as3935.yaml b/dts/Bindings/iio/proximity/ams,as3935.yaml index 7fcba5d6d5..9567993ce4 100644 --- a/dts/Bindings/iio/proximity/ams,as3935.yaml +++ b/dts/Bindings/iio/proximity/ams,as3935.yaml @@ -10,7 +10,7 @@ maintainers: - Matt Ranostay <matt.ranostay@konsulko.com> description: - This lightening distance sensor uses an I2C or SPI interface. The + This lightning distance sensor uses an I2C or SPI interface. The binding currently only covers the SPI option. properties: @@ -49,7 +49,10 @@ required: - spi-cpha - interrupts -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | @@ -57,7 +60,7 @@ examples: #address-cells = <1>; #size-cells = <0>; - lightning@0 { + lightning@0 { compatible = "ams,as3935"; reg = <0>; spi-max-frequency = <400000>; diff --git a/dts/Bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml b/dts/Bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml index 00e3b59641..d4e09d2dcd 100644 --- a/dts/Bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml +++ b/dts/Bindings/iio/proximity/google,cros-ec-mkbp-proximity.yaml @@ -1,7 +1,6 @@ # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2 --- - $id: http://devicetree.org/schemas/iio/proximity/google,cros-ec-mkbp-proximity.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# diff --git a/dts/Bindings/iio/proximity/murata,irsd200.yaml b/dts/Bindings/iio/proximity/murata,irsd200.yaml new file mode 100644 index 0000000000..67f5389ece --- /dev/null +++ b/dts/Bindings/iio/proximity/murata,irsd200.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/proximity/murata,irsd200.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Murata IRS-D200 PIR sensor + +maintainers: + - Waqar Hameed <waqar.hameed@axis.com> + +description: + PIR sensor for human detection. + +properties: + compatible: + const: murata,irsd200 + + reg: + items: + - enum: + - 0x48 + - 0x49 + description: | + When the AD pin is connected to GND, the slave address is 0x48. + When the AD pin is connected to VDD, the slave address is 0x49. + + interrupts: + maxItems: 1 + description: + Type should be IRQ_TYPE_EDGE_RISING. + + vdd-supply: + description: + 3.3 V supply voltage. + +required: + - compatible + - reg + - interrupts + - vdd-supply + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + proximity@48 { + compatible = "murata,irsd200"; + reg = <0x48>; + interrupts = <24 IRQ_TYPE_EDGE_RISING>; + vdd-supply = <®ulator_3v3>; + }; + }; +... diff --git a/dts/Bindings/iio/proximity/semtech,sx9310.yaml b/dts/Bindings/iio/proximity/semtech,sx9310.yaml index 5de0bb2180..775555d147 100644 --- a/dts/Bindings/iio/proximity/semtech,sx9310.yaml +++ b/dts/Bindings/iio/proximity/semtech,sx9310.yaml @@ -15,6 +15,9 @@ description: | Specifications about the devices can be found at: https://www.semtech.com/products/smart-sensing/sar-sensors/sx9310 +allOf: + - $ref: /schemas/iio/iio.yaml# + properties: compatible: enum: @@ -102,7 +105,7 @@ required: - reg - "#io-channel-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/proximity/semtech,sx9324.yaml b/dts/Bindings/iio/proximity/semtech,sx9324.yaml index b3aa2ebf96..48f2214631 100644 --- a/dts/Bindings/iio/proximity/semtech,sx9324.yaml +++ b/dts/Bindings/iio/proximity/semtech,sx9324.yaml @@ -13,6 +13,9 @@ maintainers: description: | Semtech's SX9324 proximity sensor. +allOf: + - $ref: /schemas/iio/iio.yaml# + properties: compatible: const: semtech,sx9324 @@ -167,7 +170,7 @@ required: - reg - "#io-channel-cells" -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/proximity/semtech,sx9360.yaml b/dts/Bindings/iio/proximity/semtech,sx9360.yaml index f088c5d2be..ad0bb44f41 100644 --- a/dts/Bindings/iio/proximity/semtech,sx9360.yaml +++ b/dts/Bindings/iio/proximity/semtech,sx9360.yaml @@ -36,7 +36,7 @@ properties: const: 1 semtech,resolution: - $ref: /schemas/types.yaml#/definitions/uint32-array + $ref: /schemas/types.yaml#/definitions/uint32 enum: [8, 16, 32, 64, 128, 256, 512, 1024] description: Capacitance measurement resolution. For both phases, "reference" and diff --git a/dts/Bindings/iio/resolver/adi,ad2s1210.yaml b/dts/Bindings/iio/resolver/adi,ad2s1210.yaml new file mode 100644 index 0000000000..8980b3cd83 --- /dev/null +++ b/dts/Bindings/iio/resolver/adi,ad2s1210.yaml @@ -0,0 +1,177 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/resolver/adi,ad2s1210.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Analog Devices AD2S1210 Resolver-to-Digital Converter + +maintainers: + - Michael Hennerich <michael.hennerich@analog.com> + +description: | + The AD2S1210 is a complete 10-bit to 16-bit resolution tracking + resolver-to-digital converter, integrating an on-board programmable + sinusoidal oscillator that provides sine wave excitation for + resolvers. + + The AD2S1210 allows the user to read the angular position or the + angular velocity data directly from the parallel outputs or through + the serial interface. + + The mode of operation of the communication channel (parallel or serial) is + selected by the A0 and A1 input pins. In normal mode, data is latched by + toggling the SAMPLE line and can then be read directly. In configuration mode, + data is read or written using a register access scheme (address byte with + read/write flag and data byte). + + A1 A0 Result + 0 0 Normal mode - position output + 0 1 Normal mode - velocity output + 1 0 Reserved + 1 1 Configuration mode + + In normal mode, the resolution of the digital output is selected using + the RES0 and RES1 input pins. In configuration mode, the resolution is + selected by setting the RES0 and RES1 bits in the control register. + + RES1 RES0 Resolution (Bits) + 0 0 10 + 0 1 12 + 1 0 14 + 1 1 16 + + Note on SPI connections: The CS line on the AD2S1210 should hard-wired to + logic low and the WR/FSYNC line on the AD2S1210 should be connected to the + SPI CSn output of the SPI controller. + + Datasheet: + https://www.analog.com/media/en/technical-documentation/data-sheets/ad2s1210.pdf + +properties: + compatible: + const: adi,ad2s1210 + + reg: + maxItems: 1 + + spi-max-frequency: + maximum: 25000000 + + spi-cpha: true + + avdd-supply: + description: + A 4.75 to 5.25 V regulator that powers the Analog Supply Voltage (AVDD) + pin. + + dvdd-supply: + description: + A 4.75 to 5.25 V regulator that powers the Digital Supply Voltage (DVDD) + pin. + + vdrive-supply: + description: + A 2.3 to 5.25 V regulator that powers the Logic Power Supply Input + (VDrive) pin. + + clocks: + maxItems: 1 + description: External oscillator clock (CLKIN). + + reset-gpios: + description: + GPIO connected to the /RESET pin. As the line needs to be low for the + reset to be active, it should be configured as GPIO_ACTIVE_LOW. + maxItems: 1 + + sample-gpios: + description: + GPIO connected to the /SAMPLE pin. As the line needs to be low to trigger + a sample, it should be configured as GPIO_ACTIVE_LOW. + maxItems: 1 + + mode-gpios: + description: + GPIO lines connected to the A0 and A1 pins. These pins select the data + transfer mode. + minItems: 2 + maxItems: 2 + + resolution-gpios: + description: + GPIO lines connected to the RES0 and RES1 pins. These pins select the + resolution of the digital output. If omitted, it is assumed that the + RES0 and RES1 pins are hard-wired to match the assigned-resolution-bits + property. + minItems: 2 + maxItems: 2 + + fault-gpios: + description: + GPIO lines connected to the LOT and DOS pins. These pins combined indicate + the type of fault present, if any. As these pins a pulled low to indicate + a fault condition, they should be configured as GPIO_ACTIVE_LOW. + minItems: 2 + maxItems: 2 + + adi,fixed-mode: + description: + This is used to indicate the selected mode if A0 and A1 are hard-wired + instead of connected to GPIOS (i.e. mode-gpios is omitted). + $ref: /schemas/types.yaml#/definitions/string + enum: [config, velocity, position] + + assigned-resolution-bits: + description: + Resolution of the digital output required by the application. This + determines the precision of the angle and/or the maximum speed that can + be measured. If resolution-gpios is omitted, it is assumed that RES0 and + RES1 are hard-wired to match this value. + enum: [10, 12, 14, 16] + +required: + - compatible + - reg + - spi-cpha + - avdd-supply + - dvdd-supply + - vdrive-supply + - clocks + - sample-gpios + - assigned-resolution-bits + +oneOf: + - required: + - mode-gpios + - required: + - adi,fixed-mode + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + spi { + #address-cells = <1>; + #size-cells = <0>; + + resolver@0 { + compatible = "adi,ad2s1210"; + reg = <0>; + spi-max-frequency = <20000000>; + spi-cpha; + avdd-supply = <&avdd_regulator>; + dvdd-supply = <&dvdd_regulator>; + vdrive-supply = <&vdrive_regulator>; + clocks = <&ext_osc>; + sample-gpios = <&gpio0 90 GPIO_ACTIVE_LOW>; + mode-gpios = <&gpio0 86 0>, <&gpio0 87 0>; + resolution-gpios = <&gpio0 88 0>, <&gpio0 89 0>; + assigned-resolution-bits = <16>; + }; + }; diff --git a/dts/Bindings/iio/resolver/adi,ad2s90.yaml b/dts/Bindings/iio/resolver/adi,ad2s90.yaml index 81e4bdfc17..b24e5a202a 100644 --- a/dts/Bindings/iio/resolver/adi,ad2s90.yaml +++ b/dts/Bindings/iio/resolver/adi,ad2s90.yaml @@ -33,8 +33,6 @@ properties: spi-cpha: true -additionalProperties: false - required: - compatible - reg @@ -43,6 +41,11 @@ dependencies: spi-cpol: [ spi-cpha ] spi-cpha: [ spi-cpol ] +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/dts/Bindings/iio/samsung,sensorhub-rinato.yaml b/dts/Bindings/iio/samsung,sensorhub-rinato.yaml index a88b3b14d6..dd2ae2bd1a 100644 --- a/dts/Bindings/iio/samsung,sensorhub-rinato.yaml +++ b/dts/Bindings/iio/samsung,sensorhub-rinato.yaml @@ -40,10 +40,6 @@ properties: description: Reset the sensorhub. - spi-max-frequency: true - -additionalProperties: false - required: - compatible - reg @@ -52,6 +48,11 @@ required: - mcu-ap-gpios - mcu-reset-gpios +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false + examples: - | spi { diff --git a/dts/Bindings/iio/st,st-sensors.yaml b/dts/Bindings/iio/st,st-sensors.yaml index fcb2902683..fff7e3d83a 100644 --- a/dts/Bindings/iio/st,st-sensors.yaml +++ b/dts/Bindings/iio/st,st-sensors.yaml @@ -11,9 +11,6 @@ description: The STMicroelectronics sensor devices are pretty straight-forward what type of sensor it is. Note that whilst this covers many STMicro MEMs sensors, some more complex IMUs need their own bindings. - The STMicroelectronics sensor devices are pretty straight-forward I2C or - SPI devices, all sharing the same device tree descriptions no matter what - type of sensor it is. maintainers: - Denis Ciocca <denis.ciocca@st.com> @@ -39,6 +36,7 @@ properties: - st,lis3lv02dl-accel - st,lng2dm-accel - st,lsm303agr-accel + - st,lsm303c-accel - st,lsm303dl-accel - st,lsm303dlh-accel - st,lsm303dlhc-accel @@ -47,6 +45,9 @@ properties: - st,lsm330d-accel - st,lsm330dl-accel - st,lsm330dlc-accel + - items: + - const: st,iis328dq + - const: st,h3lis331dl-accel - description: Silan Accelerometers enum: - silan,sc7a20 @@ -66,6 +67,7 @@ properties: - st,lis2mdl - st,lis3mdl-magn - st,lsm303agr-magn + - st,lsm303c-magn - st,lsm303dlh-magn - st,lsm303dlhc-magn - st,lsm303dlm-magn @@ -73,6 +75,7 @@ properties: - description: STMicroelectronics Pressure Sensors enum: - st,lps001wp-press + - st,lps22df - st,lps22hb-press - st,lps22hh - st,lps25h-press @@ -81,6 +84,7 @@ properties: - st,lps35hw - description: IMUs enum: + - st,lsm303d-imu - st,lsm9ds0-imu - description: Deprecated bindings enum: @@ -93,7 +97,7 @@ properties: interrupts: description: interrupt line(s) connected to the DRDY line(s) and/or the - Intertial interrupt lines INT1 and INT2 if these exist. This means up to + Inertial interrupt lines INT1 and INT2 if these exist. This means up to three interrupts, and the DRDY must be the first one if it exists on the package. The trigger edge of the interrupts is sometimes software configurable in the hardware so the operating system should parse this @@ -141,6 +145,7 @@ allOf: - st,lis2mdl - st,lis3l02dq - st,lis3lv02dl-accel + - st,lps22df - st,lps22hb-press - st,lps22hh - st,lps25h-press diff --git a/dts/Bindings/iio/temperature/adi,ltc2983.yaml b/dts/Bindings/iio/temperature/adi,ltc2983.yaml index 722781aa46..dbb85135fd 100644 --- a/dts/Bindings/iio/temperature/adi,ltc2983.yaml +++ b/dts/Bindings/iio/temperature/adi,ltc2983.yaml @@ -4,19 +4,52 @@ $id: http://devicetree.org/schemas/iio/temperature/adi,ltc2983.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Analog Devices LTC2983 Multi-sensor Temperature system +title: Analog Devices LTC2983, LTC2986, LTM2985 Multi-sensor Temperature system maintainers: - Nuno Sá <nuno.sa@analog.com> description: | - Analog Devices LTC2983 Multi-Sensor Digital Temperature Measurement System + Analog Devices LTC2983, LTC2984, LTC2986, LTM2985 Multi-Sensor Digital + Temperature Measurement Systems + https://www.analog.com/media/en/technical-documentation/data-sheets/2983fc.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/2984fb.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/29861fa.pdf + https://www.analog.com/media/en/technical-documentation/data-sheets/ltm2985.pdf + +$defs: + sensor-node: + type: object + description: Sensor node common constraints + + properties: + reg: + description: + Channel number. Connects the sensor to the channel with this number + of the device. + minimum: 1 + maximum: 20 + + adi,sensor-type: + description: Type of sensor connected to the device. + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - reg + - adi,sensor-type + properties: compatible: - enum: - - adi,ltc2983 + oneOf: + - enum: + - adi,ltc2983 + - adi,ltc2986 + - adi,ltm2985 + - items: + - const: adi,ltc2984 + - const: adi,ltc2983 reg: maxItems: 1 @@ -25,26 +58,26 @@ properties: maxItems: 1 adi,mux-delay-config-us: - description: - The LTC2983 performs 2 or 3 internal conversion cycles per temperature - result. Each conversion cycle is performed with different excitation and - input multiplexer configurations. Prior to each conversion, these - excitation circuits and input switch configurations are changed and an - internal 1ms delay ensures settling prior to the conversion cycle in most - cases. An extra delay can be configured using this property. The value is - rounded to nearest 100us. + description: | + Extra delay prior to each conversion, in addition to the internal 1ms + delay, for the multiplexer to switch input configurations and + excitation values. + + This property is supposed to be in microseconds, but to maintain + compatibility, this value will be multiplied by 100 before usage. maximum: 255 + default: 0 adi,filter-notch-freq: description: - Set's the default setting of the digital filter. The default is - simultaneous 50/60Hz rejection. + Notch frequency of the digital filter. 0 - 50/60Hz rejection 1 - 60Hz rejection 2 - 50Hz rejection $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 2 + default: 0 '#address-cells': const: 1 @@ -53,30 +86,11 @@ properties: const: 0 patternProperties: - "@([1-9]|1[0-9]|20)$": - type: object - - properties: - reg: - description: - The channel number. It can be connected to one of the 20 channels of - the device. - minimum: 1 - maximum: 20 - - adi,sensor-type: - description: Identifies the type of sensor connected to the device. - $ref: /schemas/types.yaml#/definitions/uint32 - - required: - - reg - - adi,sensor-type - "^thermocouple@": - type: object - description: - Represents a thermocouple sensor which is connected to one of the device - channels. + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false + + description: Thermocouple sensor. properties: adi,sensor-type: @@ -95,86 +109,90 @@ patternProperties: maximum: 9 adi,single-ended: - description: - Boolean property which set's the thermocouple as single-ended. + description: Whether the sensor is single-ended. type: boolean adi,sensor-oc-current-microamp: - description: - This property set's the pulsed current value applied during - open-circuit detect. + description: Pulsed current value applied during open-circuit detect. enum: [10, 100, 500, 1000] + default: 10 adi,cold-junction-handle: description: - Phandle which points to a sensor object responsible for measuring - the thermocouple cold junction temperature. - $ref: "/schemas/types.yaml#/definitions/phandle" + Sensor responsible for measuring the thermocouple cold junction + temperature. + $ref: /schemas/types.yaml#/definitions/phandle adi,custom-thermocouple: description: - This is a table, where each entry should be a pair of - voltage(mv)-temperature(K). The entries must be given in nv and uK - so that, the original values must be multiplied by 1000000. For - more details look at table 69 and 70. - Note should be signed, but dtc doesn't currently maintain the - sign. - $ref: /schemas/types.yaml#/definitions/uint64-matrix + Used for digitizing custom thermocouples. + See Page 59 of the datasheet. + $ref: /schemas/types.yaml#/definitions/int64-matrix minItems: 3 maxItems: 64 items: - minItems: 2 - maxItems: 2 + items: + - description: Voltage point in nV, signed. + - description: Temperature point in uK. + + allOf: + - if: + properties: + adi,sensor-type: + const: 9 + then: + required: + - adi,custom-thermocouple "^diode@": - type: object - description: - Represents a diode sensor which is connected to one of the device - channels. + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false + + description: Diode sensor. properties: adi,sensor-type: - description: Identifies the sensor as a diode. + description: Sensor type for diodes. $ref: /schemas/types.yaml#/definitions/uint32 const: 28 adi,single-ended: - description: Boolean property which set's the diode as single-ended. + description: Whether the sensor is single-ended. type: boolean adi,three-conversion-cycles: description: - Boolean property which set's three conversion cycles removing - parasitic resistance effects between the LTC2983 and the diode. + Whether to use three conversion cycles to remove parasitic + resistance between the device and the diode. type: boolean adi,average-on: description: - Boolean property which enables a running average of the diode - temperature reading. This reduces the noise when the diode is used - as a cold junction temperature element on an isothermal block - where temperatures change slowly. + Whether to use a running average of the diode temperature + reading to reduce the noise when the diode is used as a cold + junction temperature element on an isothermal block where + temperatures change slowly. type: boolean adi,excitation-current-microamp: description: - This property controls the magnitude of the excitation current - applied to the diode. Depending on the number of conversions - cycles, this property will assume different predefined values on - each cycle. Just set the value of the first cycle (1l). + Magnitude of the 1l excitation current applied to the diode. + 4l excitation current will be 4 times this value, and 8l + excitation current will be 8 times value. enum: [10, 20, 40, 80] + default: 10 adi,ideal-factor-value: description: - This property sets the diode ideality factor. The real value must - be multiplied by 1000000 to remove the fractional part. For more - information look at table 20 of the datasheet. + Diode ideality factor. + Set this property to 1000000 times the real value. $ref: /schemas/types.yaml#/definitions/uint32 + default: 0 "^rtd@": - type: object - description: - Represents a rtd sensor which is connected to one of the device channels. + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false + description: RTD sensor. properties: reg: @@ -197,68 +215,83 @@ patternProperties: maximum: 18 adi,rsense-handle: - description: - Phandle pointing to a rsense object associated with this RTD. - $ref: "/schemas/types.yaml#/definitions/phandle" + description: Associated sense resistor sensor. + $ref: /schemas/types.yaml#/definitions/phandle adi,number-of-wires: description: - Identifies the number of wires used by the RTD. Setting this - property to 5 means 4 wires with Kelvin Rsense. + Number of wires used by the RTD. + 5 means 4 wires with Kelvin sense resistor. $ref: /schemas/types.yaml#/definitions/uint32 enum: [2, 3, 4, 5] + default: 2 adi,rsense-share: description: - Boolean property which enables Rsense sharing, where one sense - resistor is used for multiple 2-, 3-, and/or 4-wire RTDs. - type: boolean - - adi,current-rotate: - description: - Boolean property which enables excitation current rotation to - automatically remove parasitic thermocouple effects. Note that - this property is not allowed for 2- and 3-wire RTDs. + Whether to enable sense resistor sharing, where one sense + resistor is used by multiple sensors. type: boolean adi,excitation-current-microamp: - description: - This property controls the magnitude of the excitation current - applied to the RTD. + description: Excitation current applied to the RTD. enum: [5, 10, 25, 50, 100, 250, 500, 1000] + default: 5 adi,rtd-curve: - description: - This property set the RTD curve used and the corresponding - Callendar-VanDusen constants. Look at table 30 of the datasheet. + description: | + RTD curve and the corresponding Callendar-VanDusen constants. + 0 - European + 1 - American + 2 - Japanese + 3 - ITS-90 $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 3 + default: 0 adi,custom-rtd: description: - This is a table, where each entry should be a pair of - resistance(ohm)-temperature(K). The entries added here are in uohm - and uK. For more details values look at table 74 and 75. + Used for digitizing custom RTDs. + See Page 62 of the datasheet. $ref: /schemas/types.yaml#/definitions/uint64-matrix + minItems: 3 + maxItems: 64 items: - minItems: 3 - maxItems: 64 items: - minItems: 2 - maxItems: 2 + - description: Resistance point in uOhms. + - description: Temperature point in uK. required: - adi,rsense-handle - dependencies: - adi,current-rotate: [ "adi,rsense-share" ] + allOf: + - if: + properties: + adi,number-of-wires: + const: 4 + then: + properties: + adi,current-rotate: + description: + Whether to enable excitation current rotation to automatically + remove parasitic thermocouple effects. + type: boolean + + dependencies: + adi,current-rotate: [ "adi,rsense-share" ] + + - if: + properties: + adi,sensor-type: + const: 18 + then: + required: + - adi,custom-rtd "^thermistor@": - type: object - description: - Represents a thermistor sensor which is connected to one of the device - channels. + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false + description: Thermistor sensor. properties: adi,sensor-type: @@ -277,61 +310,53 @@ patternProperties: maximum: 27 adi,rsense-handle: - description: - Phandle pointing to a rsense object associated with this - thermistor. - $ref: "/schemas/types.yaml#/definitions/phandle" + description: Associated sense resistor sensor. + $ref: /schemas/types.yaml#/definitions/phandle adi,single-ended: - description: - Boolean property which set's the thermistor as single-ended. + description: Whether the sensor is single-ended. type: boolean adi,rsense-share: description: - Boolean property which enables Rsense sharing, where one sense - resistor is used for multiple thermistors. Note that this property - is ignored if adi,single-ended is set. + Whether to enable sense resistor sharing, where one sense + resistor is used by multiple sensors. type: boolean adi,current-rotate: description: - Boolean property which enables excitation current rotation to - automatically remove parasitic thermocouple effects. + Whether to enable excitation current rotation to automatically + remove parasitic thermocouple effects. type: boolean adi,excitation-current-nanoamp: description: - This property controls the magnitude of the excitation current - applied to the thermistor. Value 0 set's the sensor in auto-range - mode. - $ref: /schemas/types.yaml#/definitions/uint32 + Excitation current applied to the thermistor. + 0 sets the sensor in auto-range mode. enum: [0, 250, 500, 1000, 5000, 10000, 25000, 50000, 100000, 250000, 500000, 1000000] + default: 0 adi,custom-thermistor: description: - This is a table, where each entry should be a pair of - resistance(ohm)-temperature(K). The entries added here are in uohm - and uK only for custom thermistors. For more details look at table - 78 and 79. + Used for digitizing custom thermistors. + See Page 65 of the datasheet. $ref: /schemas/types.yaml#/definitions/uint64-matrix minItems: 3 maxItems: 64 items: - minItems: 2 - maxItems: 2 + items: + - description: Resistance point in uOhms. + - description: Temperature point in uK. adi,custom-steinhart: description: - Steinhart-Hart coefficients are also supported and can - be programmed into the device memory using this property. For - Steinhart sensors the coefficients are given in the raw - format. Look at table 82 for more information. + Steinhart-Hart coefficients in raw format, used for digitizing + custom thermistors. + See Page 68 of the datasheet. $ref: /schemas/types.yaml#/definitions/uint32-array - items: - minItems: 6 - maxItems: 6 + minItems: 6 + maxItems: 6 required: - adi,rsense-handle @@ -339,25 +364,81 @@ patternProperties: dependencies: adi,current-rotate: [ "adi,rsense-share" ] + allOf: + - if: + properties: + adi,sensor-type: + const: 26 + then: + properties: + adi,excitation-current-nanoamp: + enum: [250, 500, 1000, 5000, 10000, 25000, 50000, 100000, + 250000, 500000, 1000000] + default: 1000 + required: + - adi,custom-steinhart + - if: + properties: + adi,sensor-type: + const: 27 + then: + properties: + adi,excitation-current-nanoamp: + enum: [250, 500, 1000, 5000, 10000, 25000, 50000, 100000, + 250000, 500000, 1000000] + default: 1000 + required: + - adi,custom-thermistor + "^adc@": - type: object - description: Represents a channel which is being used as a direct adc. + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false + description: Direct ADC sensor. properties: adi,sensor-type: - description: Identifies the sensor as a direct adc. + description: Sensor type for direct ADC sensors. $ref: /schemas/types.yaml#/definitions/uint32 const: 30 adi,single-ended: - description: Boolean property which set's the adc as single-ended. + description: Whether the sensor is single-ended. type: boolean + "^temp@": + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false + description: Active analog temperature sensor. + + properties: + adi,sensor-type: + description: Sensor type for active analog temperature sensors. + $ref: /schemas/types.yaml#/definitions/uint32 + const: 31 + + adi,single-ended: + description: Whether the sensor is single-ended. + type: boolean + + adi,custom-temp: + description: + Used for digitizing active analog temperature sensors. + See Page 67 of the LTM2985 datasheet. + $ref: /schemas/types.yaml#/definitions/uint64-matrix + minItems: 3 + maxItems: 64 + items: + items: + - description: Voltage point in nV, signed. + - description: Temperature point in uK. + + required: + - adi,custom-temp + "^rsense@": - type: object - description: - Represents a rsense which is connected to one of the device channels. - Rsense are used by thermistors and RTD's. + $ref: '#/$defs/sensor-node' + unevaluatedProperties: false + description: Sense resistor sensor. properties: reg: @@ -365,14 +446,12 @@ patternProperties: maximum: 20 adi,sensor-type: - description: Identifies the sensor as a rsense. + description: Sensor type sense resistor sensors. $ref: /schemas/types.yaml#/definitions/uint32 const: 29 adi,rsense-val-milli-ohms: - description: - Sets the value of the sense resistor. Look at table 20 of the - datasheet for information. + description: Value of the sense resistor. required: - adi,rsense-val-milli-ohms @@ -384,6 +463,18 @@ required: additionalProperties: false +allOf: + - if: + properties: + compatible: + contains: + enum: + - adi,ltc2983 + - adi,ltc2984 + then: + patternProperties: + "^temp@": false + examples: - | #include <dt-bindings/interrupt-controller/irq.h> @@ -391,76 +482,75 @@ examples: #address-cells = <1>; #size-cells = <0>; - sensor_ltc2983: ltc2983@0 { - compatible = "adi,ltc2983"; - reg = <0>; - - #address-cells = <1>; - #size-cells = <0>; - - interrupts = <20 IRQ_TYPE_EDGE_RISING>; - interrupt-parent = <&gpio>; - - thermocouple@18 { - reg = <18>; - adi,sensor-type = <8>; //Type B - adi,sensor-oc-current-microamp = <10>; - adi,cold-junction-handle = <&diode5>; - }; - - diode5: diode@5 { - reg = <5>; - adi,sensor-type = <28>; - }; - - rsense2: rsense@2 { - reg = <2>; - adi,sensor-type = <29>; - adi,rsense-val-milli-ohms = <1200000>; //1.2Kohms - }; - - rtd@14 { - reg = <14>; - adi,sensor-type = <15>; //PT1000 - /*2-wire, internal gnd, no current rotation*/ - adi,number-of-wires = <2>; - adi,rsense-share; - adi,excitation-current-microamp = <500>; - adi,rsense-handle = <&rsense2>; - }; - - adc@10 { - reg = <10>; - adi,sensor-type = <30>; - adi,single-ended; - }; - - thermistor@12 { - reg = <12>; - adi,sensor-type = <26>; //Steinhart - adi,rsense-handle = <&rsense2>; - adi,custom-steinhart = <0x00F371EC 0x12345678 - 0x2C0F8733 0x10018C66 0xA0FEACCD - 0x90021D99>; //6 entries - }; - - thermocouple@20 { - reg = <20>; - adi,sensor-type = <9>; //custom thermocouple - adi,single-ended; - adi,custom-thermocouple = - /bits/ 64 <(-50220000) 0>, - /bits/ 64 <(-30200000) 99100000>, - /bits/ 64 <(-5300000) 135400000>, - /bits/ 64 <0 273150000>, - /bits/ 64 <40200000 361200000>, - /bits/ 64 <55300000 522100000>, - /bits/ 64 <88300000 720300000>, - /bits/ 64 <132200000 811200000>, - /bits/ 64 <188700000 922500000>, - /bits/ 64 <460400000 1000000000>; //10 pairs - }; - + temperature-sensor@0 { + compatible = "adi,ltc2983"; + reg = <0>; + + #address-cells = <1>; + #size-cells = <0>; + + interrupts = <20 IRQ_TYPE_EDGE_RISING>; + interrupt-parent = <&gpio>; + + thermocouple@18 { + reg = <18>; + adi,sensor-type = <8>; //Type B + adi,sensor-oc-current-microamp = <10>; + adi,cold-junction-handle = <&diode5>; + }; + + diode5: diode@5 { + reg = <5>; + adi,sensor-type = <28>; + }; + + rsense2: rsense@2 { + reg = <2>; + adi,sensor-type = <29>; + adi,rsense-val-milli-ohms = <1200000>; //1.2Kohms + }; + + rtd@14 { + reg = <14>; + adi,sensor-type = <15>; //PT1000 + /*2-wire, internal gnd, no current rotation*/ + adi,number-of-wires = <2>; + adi,rsense-share; + adi,excitation-current-microamp = <500>; + adi,rsense-handle = <&rsense2>; + }; + + adc@10 { + reg = <10>; + adi,sensor-type = <30>; + adi,single-ended; + }; + + thermistor@12 { + reg = <12>; + adi,sensor-type = <26>; //Steinhart + adi,rsense-handle = <&rsense2>; + adi,custom-steinhart = <0x00f371ec 0x12345678 + 0x2c0f8733 0x10018c66 0xa0feaccd + 0x90021d99>; //6 entries + }; + + thermocouple@20 { + reg = <20>; + adi,sensor-type = <9>; //custom thermocouple + adi,single-ended; + adi,custom-thermocouple = + /bits/ 64 <(-50220000) 0>, + /bits/ 64 <(-30200000) 99100000>, + /bits/ 64 <(-5300000) 135400000>, + /bits/ 64 <0 273150000>, + /bits/ 64 <40200000 361200000>, + /bits/ 64 <55300000 522100000>, + /bits/ 64 <88300000 720300000>, + /bits/ 64 <132200000 811200000>, + /bits/ 64 <188700000 922500000>, + /bits/ 64 <460400000 1000000000>; //10 pairs + }; }; }; ... diff --git a/dts/Bindings/iio/temperature/maxim,max31855k.yaml b/dts/Bindings/iio/temperature/maxim,max31855k.yaml index 9969bac66a..0805ed7e21 100644 --- a/dts/Bindings/iio/temperature/maxim,max31855k.yaml +++ b/dts/Bindings/iio/temperature/maxim,max31855k.yaml @@ -32,7 +32,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true spi-cpha: true required: @@ -40,6 +39,7 @@ required: - reg allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# - if: properties: compatible: @@ -53,7 +53,7 @@ allOf: properties: spi-cpha: false -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/temperature/maxim,max31856.yaml b/dts/Bindings/iio/temperature/maxim,max31856.yaml index 873b347666..228a941654 100644 --- a/dts/Bindings/iio/temperature/maxim,max31856.yaml +++ b/dts/Bindings/iio/temperature/maxim,max31856.yaml @@ -19,7 +19,6 @@ properties: reg: maxItems: 1 - spi-max-frequency: true spi-cpha: true thermocouple-type: @@ -34,7 +33,10 @@ required: - reg - spi-cpha -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/iio/temperature/maxim,max31865.yaml b/dts/Bindings/iio/temperature/maxim,max31865.yaml index aafb33b165..7cc365e0eb 100644 --- a/dts/Bindings/iio/temperature/maxim,max31865.yaml +++ b/dts/Bindings/iio/temperature/maxim,max31865.yaml @@ -25,7 +25,6 @@ properties: enables 3-wire RTD connection. Else 2-wire or 4-wire RTD connection. type: boolean - spi-max-frequency: true spi-cpha: true required: @@ -33,7 +32,10 @@ required: - reg - spi-cpha -additionalProperties: false +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +unevaluatedProperties: false examples: - | @@ -41,12 +43,12 @@ examples: #address-cells = <1>; #size-cells = <0>; - temp_sensor@0 { - compatible = "maxim,max31865"; - reg = <0>; - spi-max-frequency = <400000>; - spi-cpha; - maxim,3-wire; + temperature-sensor@0 { + compatible = "maxim,max31865"; + reg = <0>; + spi-max-frequency = <400000>; + spi-cpha; + maxim,3-wire; }; }; ... diff --git a/dts/Bindings/iio/temperature/melexis,mlx90614.yaml b/dts/Bindings/iio/temperature/melexis,mlx90614.yaml index d6965a0c1c..654d31f65d 100644 --- a/dts/Bindings/iio/temperature/melexis,mlx90614.yaml +++ b/dts/Bindings/iio/temperature/melexis,mlx90614.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/iio/temperature/melexis,mlx90614.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Melexis MLX90614 contactless IR temperature sensor +title: Melexis MLX90614/MLX90615 contactless IR temperature sensor maintainers: - Peter Meerwald <pmeerw@pmeerw.net> @@ -15,7 +15,9 @@ description: | properties: compatible: - const: melexis,mlx90614 + enum: + - melexis,mlx90614 + - melexis,mlx90615 reg: maxItems: 1 diff --git a/dts/Bindings/iio/temperature/melexis,mlx90632.yaml b/dts/Bindings/iio/temperature/melexis,mlx90632.yaml index b547ddcd54..03bb5d4fa8 100644 --- a/dts/Bindings/iio/temperature/melexis,mlx90632.yaml +++ b/dts/Bindings/iio/temperature/melexis,mlx90632.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/iio/temperature/melexis,mlx90632.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Melexis MLX90632 contactless Infra Red temperature sensor +title: Melexis MLX90632 and MLX90635 contactless Infra Red temperature sensor maintainers: - Crt Mori <cmo@melexis.com> @@ -27,14 +27,32 @@ description: | Since measured object emissivity effects Infra Red energy emitted, emissivity should be set before requesting the object temperature. + https://www.melexis.com/en/documents/documentation/datasheets/datasheet-mlx90635 + + MLX90635 is most suitable for consumer applications where + measured object temperature is in range between -20 to 100 degrees + Celsius with relative error of measurement 2 degree Celsius in + object temperature range for industrial applications, while just 0.2 + degree Celsius for human body measurement applications. Since it can + operate and measure ambient temperature in range of -20 to 85 degrees + Celsius it is suitable also for outdoor use. + + Since measured object emissivity effects Infra Red energy emitted, + emissivity should be set before requesting the object temperature. + properties: compatible: - const: melexis,mlx90632 + enum: + - melexis,mlx90632 + - melexis,mlx90635 reg: maxItems: 1 description: Default is 0x3a, but can be reprogrammed. + vdd-supply: + description: provide VDD power to the sensor. + required: - compatible - reg @@ -50,6 +68,7 @@ examples: temp-sensor@3a { compatible = "melexis,mlx90632"; reg = <0x3a>; + vdd-supply = <&ldo4_reg>; }; }; ... diff --git a/dts/Bindings/iio/temperature/microchip,mcp9600.yaml b/dts/Bindings/iio/temperature/microchip,mcp9600.yaml new file mode 100644 index 0000000000..d2cafa38a5 --- /dev/null +++ b/dts/Bindings/iio/temperature/microchip,mcp9600.yaml @@ -0,0 +1,70 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/temperature/microchip,mcp9600.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip MCP9600 thermocouple EMF converter + +maintainers: + - Andrew Hepp <andrew.hepp@ahepp.dev> + +description: + https://ww1.microchip.com/downloads/en/DeviceDoc/MCP960X-Data-Sheet-20005426.pdf + +properties: + compatible: + const: microchip,mcp9600 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + maxItems: 6 + + interrupt-names: + minItems: 1 + maxItems: 6 + items: + enum: + - open-circuit + - short-circuit + - alert1 + - alert2 + - alert3 + - alert4 + + thermocouple-type: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Type of thermocouple (THERMOCOUPLE_TYPE_K if omitted). + Use defines in dt-bindings/iio/temperature/thermocouple.h. + Supported types are B, E, J, K, N, R, S, T. + + vdd-supply: true + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/iio/temperature/thermocouple.h> + #include <dt-bindings/interrupt-controller/irq.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + temperature-sensor@60 { + compatible = "microchip,mcp9600"; + reg = <0x60>; + interrupt-parent = <&gpio>; + interrupts = <25 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "open-circuit"; + thermocouple-type = <THERMOCOUPLE_TYPE_K>; + vdd-supply = <&vdd>; + }; + }; diff --git a/dts/Bindings/iio/temperature/ti,tmp006.yaml b/dts/Bindings/iio/temperature/ti,tmp006.yaml new file mode 100644 index 0000000000..d43002b9bf --- /dev/null +++ b/dts/Bindings/iio/temperature/ti,tmp006.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/temperature/ti,tmp006.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TMP006 IR thermopile sensor + +maintainers: + - Peter Meerwald <pmeerw@pmeerw.net> + +description: | + TI TMP006 - Infrared Thermopile Sensor in Chip-Scale Package. + https://cdn.sparkfun.com/datasheets/Sensors/Temp/tmp006.pdf + +properties: + compatible: + const: ti,tmp006 + + reg: + maxItems: 1 + + vdd-supply: + description: provide VDD power to the sensor. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + temperature-sensor@40 { + compatible = "ti,tmp006"; + reg = <0x40>; + vdd-supply = <&ldo4_reg>; + }; + }; diff --git a/dts/Bindings/iio/temperature/ti,tmp117.yaml b/dts/Bindings/iio/temperature/ti,tmp117.yaml index 347bc16a46..58aa154277 100644 --- a/dts/Bindings/iio/temperature/ti,tmp117.yaml +++ b/dts/Bindings/iio/temperature/ti,tmp117.yaml @@ -1,15 +1,16 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: "http://devicetree.org/schemas/iio/temperature/ti,tmp117.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/iio/temperature/ti,tmp117.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: "TI TMP117 - Digital temperature sensor with integrated NV memory" +title: TI TMP117 - Digital temperature sensor with integrated NV memory description: | - TI TMP117 - Digital temperature sensor with integrated NV memory that supports - I2C interface. - https://www.ti.com/lit/gpn/tmp1 + TI TMP116/117 - Digital temperature sensor with integrated NV memory that + supports I2C interface. + https://www.ti.com/lit/gpn/tmp116 + https://www.ti.com/lit/gpn/tmp117 maintainers: - Puranjay Mohan <puranjay12@gmail.com> @@ -17,14 +18,22 @@ maintainers: properties: compatible: enum: + - ti,tmp116 - ti,tmp117 reg: maxItems: 1 + vcc-supply: + description: provide VCC power to the sensor. + + label: + description: Unique name to identify which device this is. + required: - compatible - reg + - vcc-supply additionalProperties: false @@ -37,5 +46,6 @@ examples: tmp117@48 { compatible = "ti,tmp117"; reg = <0x48>; + vcc-supply = <&pmic_reg_3v3>; }; }; |