summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/iio
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/iio')
-rw-r--r--dts/Bindings/iio/accel/mma8452.txt4
-rw-r--r--dts/Bindings/iio/adc/adi,ad7606.txt65
-rw-r--r--dts/Bindings/iio/adc/adi,ad7768-1.txt41
-rw-r--r--dts/Bindings/iio/adc/amlogic,meson-saradc.txt4
-rw-r--r--dts/Bindings/iio/adc/ingenic,adc.txt48
-rw-r--r--dts/Bindings/iio/adc/lpc32xx-adc.txt16
-rw-r--r--dts/Bindings/iio/adc/nuvoton,npcm-adc.txt24
-rw-r--r--dts/Bindings/iio/adc/samsung,exynos-adc.txt4
-rw-r--r--dts/Bindings/iio/adc/stmpe-adc.txt21
-rw-r--r--dts/Bindings/iio/adc/ti-ads124s08.txt25
-rw-r--r--dts/Bindings/iio/chemical/bme680.txt11
-rw-r--r--dts/Bindings/iio/chemical/plantower,pms7003.txt20
-rw-r--r--dts/Bindings/iio/chemical/sensirion,sgp30.txt15
-rw-r--r--dts/Bindings/iio/chemical/sensirion,sps30.txt12
-rw-r--r--dts/Bindings/iio/dac/ti,dac7612.txt28
-rw-r--r--dts/Bindings/iio/impedance-analyzer/ad5933.txt26
-rw-r--r--dts/Bindings/iio/imu/bmi160.txt6
-rw-r--r--dts/Bindings/iio/imu/inv_mpu6050.txt1
-rw-r--r--dts/Bindings/iio/light/max44009.txt24
-rw-r--r--dts/Bindings/iio/st-sensors.txt1
20 files changed, 393 insertions, 3 deletions
diff --git a/dts/Bindings/iio/accel/mma8452.txt b/dts/Bindings/iio/accel/mma8452.txt
index 2100e9a..e132394 100644
--- a/dts/Bindings/iio/accel/mma8452.txt
+++ b/dts/Bindings/iio/accel/mma8452.txt
@@ -20,6 +20,10 @@ Optional properties:
- interrupt-names: should contain "INT1" and/or "INT2", the accelerometer's
interrupt line in use.
+ - vdd-supply: phandle to the regulator that provides vdd power to the accelerometer.
+
+ - vddio-supply: phandle to the regulator that provides vddio power to the accelerometer.
+
Example:
mma8453fc@1d {
diff --git a/dts/Bindings/iio/adc/adi,ad7606.txt b/dts/Bindings/iio/adc/adi,ad7606.txt
new file mode 100644
index 0000000..d7b6241
--- /dev/null
+++ b/dts/Bindings/iio/adc/adi,ad7606.txt
@@ -0,0 +1,65 @@
+Analog Devices AD7606 Simultaneous Sampling ADC
+
+Required properties for the AD7606:
+
+- compatible: Must be one of
+ * "adi,ad7605-4"
+ * "adi,ad7606-8"
+ * "adi,ad7606-6"
+ * "adi,ad7606-4"
+- reg: SPI chip select number for the device
+- spi-max-frequency: Max SPI frequency to use
+ see: Documentation/devicetree/bindings/spi/spi-bus.txt
+- spi-cpha: See Documentation/devicetree/bindings/spi/spi-bus.txt
+- avcc-supply: phandle to the Avcc power supply
+- interrupts: IRQ line for the ADC
+ see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+- adi,conversion-start-gpios: must be the device tree identifier of the CONVST pin.
+ This logic input is used to initiate conversions on the analog
+ input channels. As the line is active high, it should be marked
+ GPIO_ACTIVE_HIGH.
+
+Optional properties:
+
+- reset-gpios: must be the device tree identifier of the RESET pin. If specified,
+ it will be asserted during driver probe. As the line is active high,
+ it should be marked GPIO_ACTIVE_HIGH.
+- standby-gpios: must be the device tree identifier of the STBY pin. This pin is used
+ to place the AD7606 into one of two power-down modes, Standby mode or
+ Shutdown mode. As the line is active low, it should be marked
+ GPIO_ACTIVE_LOW.
+- adi,first-data-gpios: must be the device tree identifier of the FRSTDATA pin.
+ The FRSTDATA output indicates when the first channel, V1, is
+ being read back on either the parallel, byte or serial interface.
+ As the line is active high, it should be marked GPIO_ACTIVE_HIGH.
+- adi,range-gpios: must be the device tree identifier of the RANGE pin. The polarity on
+ this pin determines the input range of the analog input channels. If
+ this pin is tied to a logic high, the analog input range is ±10V for
+ all channels. If this pin is tied to a logic low, the analog input range
+ is ±5V for all channels. As the line is active high, it should be marked
+ GPIO_ACTIVE_HIGH.
+- adi,oversampling-ratio-gpios: must be the device tree identifier of the over-sampling
+ mode pins. As the line is active high, it should be marked
+ GPIO_ACTIVE_HIGH.
+
+Example:
+
+ adc@0 {
+ compatible = "adi,ad7606-8";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ spi-cpol;
+
+ avcc-supply = <&adc_vref>;
+
+ interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+ interrupt-parent = <&gpio>;
+
+ adi,conversion-start-gpios = <&gpio 17 GPIO_ACTIVE_HIGH>;
+ reset-gpios = <&gpio 27 GPIO_ACTIVE_HIGH>;
+ adi,first-data-gpios = <&gpio 22 GPIO_ACTIVE_HIGH>;
+ adi,oversampling-ratio-gpios = <&gpio 18 GPIO_ACTIVE_HIGH
+ &gpio 23 GPIO_ACTIVE_HIGH
+ &gpio 26 GPIO_ACTIVE_HIGH>;
+ standby-gpios = <&gpio 24 GPIO_ACTIVE_LOW>;
+ };
diff --git a/dts/Bindings/iio/adc/adi,ad7768-1.txt b/dts/Bindings/iio/adc/adi,ad7768-1.txt
new file mode 100644
index 0000000..9f5b88c
--- /dev/null
+++ b/dts/Bindings/iio/adc/adi,ad7768-1.txt
@@ -0,0 +1,41 @@
+Analog Devices AD7768-1 ADC device driver
+
+Required properties for the AD7768-1:
+
+- compatible: Must be "adi,ad7768-1"
+- reg: SPI chip select number for the device
+- spi-max-frequency: Max SPI frequency to use
+ see: Documentation/devicetree/bindings/spi/spi-bus.txt
+- clocks: phandle to the master clock (mclk)
+ see: Documentation/devicetree/bindings/clock/clock-bindings.txt
+- clock-names: Must be "mclk".
+- interrupts: IRQ line for the ADC
+ see: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+- vref-supply: vref supply can be used as reference for conversion
+- adi,sync-in-gpios: must be the device tree identifier of the SYNC-IN pin. Enables
+ synchronization of multiple devices that require simultaneous sampling.
+ A pulse is always required if the configuration is changed in any way, for example
+ if the filter decimation rate changes. As the line is active low, it should
+ be marked GPIO_ACTIVE_LOW.
+
+Optional properties:
+
+ - reset-gpios : GPIO spec for the RESET pin. If specified, it will be asserted during
+ driver probe. As the line is active low, it should be marked GPIO_ACTIVE_LOW.
+
+Example:
+
+ adc@0 {
+ compatible = "adi,ad7768-1";
+ reg = <0>;
+ spi-max-frequency = <2000000>;
+ spi-cpol;
+ spi-cpha;
+ vref-supply = <&adc_vref>;
+ interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+ interrupt-parent = <&gpio>;
+ adi,sync-in-gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ reset-gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
+ clocks = <&ad7768_mclk>;
+ clock-names = "mclk";
+ };
diff --git a/dts/Bindings/iio/adc/amlogic,meson-saradc.txt b/dts/Bindings/iio/adc/amlogic,meson-saradc.txt
index 325090e..75c7759 100644
--- a/dts/Bindings/iio/adc/amlogic,meson-saradc.txt
+++ b/dts/Bindings/iio/adc/amlogic,meson-saradc.txt
@@ -23,6 +23,10 @@ Required properties:
- #io-channel-cells: must be 1, see ../iio-bindings.txt
Optional properties:
+- amlogic,hhi-sysctrl: phandle to the syscon which contains the 5th bit
+ of the TSC (temperature sensor coefficient) on
+ Meson8b and Meson8m2 (which used to calibrate the
+ temperature sensor)
- nvmem-cells: phandle to the temperature_calib eFuse cells
- nvmem-cell-names: if present (to enable the temperature sensor
calibration) this must contain "temperature_calib"
diff --git a/dts/Bindings/iio/adc/ingenic,adc.txt b/dts/Bindings/iio/adc/ingenic,adc.txt
new file mode 100644
index 0000000..f01159f
--- /dev/null
+++ b/dts/Bindings/iio/adc/ingenic,adc.txt
@@ -0,0 +1,48 @@
+* Ingenic JZ47xx ADC controller IIO bindings
+
+Required properties:
+
+- compatible: Should be one of:
+ * ingenic,jz4725b-adc
+ * ingenic,jz4740-adc
+- reg: ADC controller registers location and length.
+- clocks: phandle to the SoC's ADC clock.
+- clock-names: Must be set to "adc".
+- #io-channel-cells: Must be set to <1> to indicate channels are selected
+ by index.
+
+ADC clients must use the format described in iio-bindings.txt, giving
+a phandle and IIO specifier pair ("io-channels") to the ADC controller.
+
+Example:
+
+#include <dt-bindings/iio/adc/ingenic,adc.h>
+
+adc: adc@10070000 {
+ compatible = "ingenic,jz4740-adc";
+ #io-channel-cells = <1>;
+
+ reg = <0x10070000 0x30>;
+
+ clocks = <&cgu JZ4740_CLK_ADC>;
+ clock-names = "adc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <18>;
+};
+
+adc-keys {
+ ...
+ compatible = "adc-keys";
+ io-channels = <&adc INGENIC_ADC_AUX>;
+ io-channel-names = "buttons";
+ ...
+};
+
+battery {
+ ...
+ compatible = "ingenic,jz4740-battery";
+ io-channels = <&adc INGENIC_ADC_BATTERY>;
+ io-channel-names = "battery";
+ ...
+};
diff --git a/dts/Bindings/iio/adc/lpc32xx-adc.txt b/dts/Bindings/iio/adc/lpc32xx-adc.txt
new file mode 100644
index 0000000..b3629d3
--- /dev/null
+++ b/dts/Bindings/iio/adc/lpc32xx-adc.txt
@@ -0,0 +1,16 @@
+* NXP LPC32xx SoC ADC controller
+
+Required properties:
+- compatible: must be "nxp,lpc3220-adc"
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: The ADC interrupt
+
+Example:
+
+ adc@40048000 {
+ compatible = "nxp,lpc3220-adc";
+ reg = <0x40048000 0x1000>;
+ interrupt-parent = <&mic>;
+ interrupts = <39 0>;
+ };
diff --git a/dts/Bindings/iio/adc/nuvoton,npcm-adc.txt b/dts/Bindings/iio/adc/nuvoton,npcm-adc.txt
new file mode 100644
index 0000000..eb939fe
--- /dev/null
+++ b/dts/Bindings/iio/adc/nuvoton,npcm-adc.txt
@@ -0,0 +1,24 @@
+Nuvoton NPCM Analog to Digital Converter (ADC)
+
+The NPCM ADC is a 10-bit converter for eight channel inputs.
+
+Required properties:
+- compatible: "nuvoton,npcm750-adc" for the NPCM7XX BMC.
+- reg: specifies physical base address and size of the registers.
+- interrupts: Contain the ADC interrupt with flags for falling edge.
+
+Optional properties:
+- clocks: phandle of ADC reference clock, in case the clock is not
+ added the ADC will use the default ADC sample rate.
+- vref-supply: The regulator supply ADC reference voltage, in case the
+ vref-supply is not added the ADC will use internal voltage
+ reference.
+
+Example:
+
+adc: adc@f000c000 {
+ compatible = "nuvoton,npcm750-adc";
+ reg = <0xf000c000 0x8>;
+ interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clk NPCM7XX_CLK_ADC>;
+};
diff --git a/dts/Bindings/iio/adc/samsung,exynos-adc.txt b/dts/Bindings/iio/adc/samsung,exynos-adc.txt
index a10c1f8..e1fe02f 100644
--- a/dts/Bindings/iio/adc/samsung,exynos-adc.txt
+++ b/dts/Bindings/iio/adc/samsung,exynos-adc.txt
@@ -11,11 +11,13 @@ New driver handles the following
Required properties:
- compatible: Must be "samsung,exynos-adc-v1"
- for exynos4412/5250 controllers.
+ for Exynos5250 controllers.
Must be "samsung,exynos-adc-v2" for
future controllers.
Must be "samsung,exynos3250-adc" for
controllers compatible with ADC of Exynos3250.
+ Must be "samsung,exynos4212-adc" for
+ controllers compatible with ADC of Exynos4212 and Exynos4412.
Must be "samsung,exynos7-adc" for
the ADC in Exynos7 and compatibles
Must be "samsung,s3c2410-adc" for
diff --git a/dts/Bindings/iio/adc/stmpe-adc.txt b/dts/Bindings/iio/adc/stmpe-adc.txt
new file mode 100644
index 0000000..480e664
--- /dev/null
+++ b/dts/Bindings/iio/adc/stmpe-adc.txt
@@ -0,0 +1,21 @@
+STMPE ADC driver
+----------------
+
+Required properties:
+ - compatible: "st,stmpe-adc"
+
+Optional properties:
+Note that the ADC is shared with the STMPE touchscreen. ADC related settings
+have to be done in the mfd.
+- st,norequest-mask: bitmask specifying which ADC channels should _not_ be
+ requestable due to different usage (e.g. touch)
+
+Node name must be stmpe_adc and should be child node of stmpe node to
+which it belongs.
+
+Example:
+
+ stmpe_adc {
+ compatible = "st,stmpe-adc";
+ st,norequest-mask = <0x0F>; /* dont use ADC CH3-0 */
+ };
diff --git a/dts/Bindings/iio/adc/ti-ads124s08.txt b/dts/Bindings/iio/adc/ti-ads124s08.txt
new file mode 100644
index 0000000..ecf807b
--- /dev/null
+++ b/dts/Bindings/iio/adc/ti-ads124s08.txt
@@ -0,0 +1,25 @@
+* Texas Instruments' ads124s08 and ads124s06 ADC chip
+
+Required properties:
+ - compatible :
+ "ti,ads124s08"
+ "ti,ads124s06"
+ - reg : spi chip select number for the device
+
+Recommended properties:
+ - spi-max-frequency : Definition as per
+ Documentation/devicetree/bindings/spi/spi-bus.txt
+ - spi-cpha : Definition as per
+ Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Optional properties:
+ - reset-gpios : GPIO pin used to reset the device.
+
+Example:
+adc@0 {
+ compatible = "ti,ads124s08";
+ reg = <0>;
+ spi-max-frequency = <1000000>;
+ spi-cpha;
+ reset-gpios = <&gpio1 16 GPIO_ACTIVE_LOW>;
+};
diff --git a/dts/Bindings/iio/chemical/bme680.txt b/dts/Bindings/iio/chemical/bme680.txt
new file mode 100644
index 0000000..7f3827c
--- /dev/null
+++ b/dts/Bindings/iio/chemical/bme680.txt
@@ -0,0 +1,11 @@
+Bosch Sensortec BME680 pressure/temperature/humidity/voc sensors
+
+Required properties:
+- compatible: must be "bosch,bme680"
+
+Example:
+
+bme680@76 {
+ compatible = "bosch,bme680";
+ reg = <0x76>;
+};
diff --git a/dts/Bindings/iio/chemical/plantower,pms7003.txt b/dts/Bindings/iio/chemical/plantower,pms7003.txt
new file mode 100644
index 0000000..7b5f06f
--- /dev/null
+++ b/dts/Bindings/iio/chemical/plantower,pms7003.txt
@@ -0,0 +1,20 @@
+* Plantower PMS7003 particulate matter sensor
+
+Required properties:
+- compatible: must be "plantower,pms7003"
+- vcc-supply: phandle to the regulator that provides power to the sensor
+
+Optional properties:
+- plantower,set-gpios: phandle to the GPIO connected to the SET line
+- reset-gpios: phandle to the GPIO connected to the RESET line
+
+Refer to serial/slave-device.txt for generic serial attached device bindings.
+
+Example:
+
+&uart0 {
+ air-pollution-sensor {
+ compatible = "plantower,pms7003";
+ vcc-supply = <&reg_vcc5v0>;
+ };
+};
diff --git a/dts/Bindings/iio/chemical/sensirion,sgp30.txt b/dts/Bindings/iio/chemical/sensirion,sgp30.txt
new file mode 100644
index 0000000..5844ed5
--- /dev/null
+++ b/dts/Bindings/iio/chemical/sensirion,sgp30.txt
@@ -0,0 +1,15 @@
+* Sensirion SGP30/SGPC3 multi-pixel Gas Sensor
+
+Required properties:
+
+ - compatible: must be one of
+ "sensirion,sgp30"
+ "sensirion,sgpc3"
+ - reg: the I2C address of the sensor
+
+Example:
+
+gas@58 {
+ compatible = "sensirion,sgp30";
+ reg = <0x58>;
+};
diff --git a/dts/Bindings/iio/chemical/sensirion,sps30.txt b/dts/Bindings/iio/chemical/sensirion,sps30.txt
new file mode 100644
index 0000000..6eee270
--- /dev/null
+++ b/dts/Bindings/iio/chemical/sensirion,sps30.txt
@@ -0,0 +1,12 @@
+* Sensirion SPS30 particulate matter sensor
+
+Required properties:
+- compatible: must be "sensirion,sps30"
+- reg: the I2C address of the sensor
+
+Example:
+
+sps30@69 {
+ compatible = "sensirion,sps30";
+ reg = <0x69>;
+};
diff --git a/dts/Bindings/iio/dac/ti,dac7612.txt b/dts/Bindings/iio/dac/ti,dac7612.txt
new file mode 100644
index 0000000..639c94e
--- /dev/null
+++ b/dts/Bindings/iio/dac/ti,dac7612.txt
@@ -0,0 +1,28 @@
+* Texas Instruments Dual, 12-Bit Serial Input Digital-to-Analog Converter
+
+The DAC7612 is a dual, 12-bit digital-to-analog converter (DAC) with guaranteed
+12-bit monotonicity performance over the industrial temperature range.
+Is is programmable through an SPI interface.
+
+The internal DACs are loaded when the LOADDACS pin is pulled down.
+
+http://www.ti.com/lit/ds/sbas106/sbas106.pdf
+
+Required Properties:
+- compatible: Should be one of:
+ "ti,dac7612"
+ "ti,dac7612u"
+ "ti,dac7612ub"
+- reg: Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Optional Properties:
+- ti,loaddacs-gpios: GPIO descriptor for the LOADDACS pin.
+- spi-*: Definition as per Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Example:
+
+ dac@1 {
+ compatible = "ti,dac7612";
+ reg = <0x1>;
+ ti,loaddacs-gpios = <&msmgpio 25 GPIO_ACTIVE_LOW>;
+ };
diff --git a/dts/Bindings/iio/impedance-analyzer/ad5933.txt b/dts/Bindings/iio/impedance-analyzer/ad5933.txt
new file mode 100644
index 0000000..5ff3872
--- /dev/null
+++ b/dts/Bindings/iio/impedance-analyzer/ad5933.txt
@@ -0,0 +1,26 @@
+Analog Devices AD5933/AD5934 Impedance Converter, Network Analyzer
+
+https://www.analog.com/media/en/technical-documentation/data-sheets/AD5933.pdf
+https://www.analog.com/media/en/technical-documentation/data-sheets/AD5934.pdf
+
+Required properties:
+ - compatible : should be one of
+ "adi,ad5933"
+ "adi,ad5934"
+ - reg : the I2C address.
+ - vdd-supply : The regulator supply for DVDD, AVDD1 and AVDD2 when they
+ are connected together.
+
+Optional properties:
+- clocks : external clock reference.
+- clock-names : must be "mclk" if clocks is set.
+
+Example for a I2C device node:
+
+ impedance-analyzer@0d {
+ compatible = "adi,adxl345";
+ reg = <0x0d>;
+ vdd-supply = <&vdd_supply>;
+ clocks = <&ref_clk>;
+ clock-names = "mclk";
+ };
diff --git a/dts/Bindings/iio/imu/bmi160.txt b/dts/Bindings/iio/imu/bmi160.txt
index 0c1c105..900c169 100644
--- a/dts/Bindings/iio/imu/bmi160.txt
+++ b/dts/Bindings/iio/imu/bmi160.txt
@@ -9,9 +9,11 @@ Required properties:
- spi-max-frequency : set maximum clock frequency (only for SPI)
Optional properties:
- - interrupts : interrupt mapping for IRQ, must be IRQ_TYPE_LEVEL_LOW
+ - interrupts : interrupt mapping for IRQ
- interrupt-names : set to "INT1" if INT1 pin should be used as interrupt
input, set to "INT2" if INT2 pin should be used instead
+ - drive-open-drain : set if the specified interrupt pin should be configured as
+ open drain. If not set, defaults to push-pull.
Examples:
@@ -20,7 +22,7 @@ bmi160@68 {
reg = <0x68>;
interrupt-parent = <&gpio4>;
- interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <12 IRQ_TYPE_EDGE_RISING>;
interrupt-names = "INT1";
};
diff --git a/dts/Bindings/iio/imu/inv_mpu6050.txt b/dts/Bindings/iio/imu/inv_mpu6050.txt
index 6ab9a9d..268bf75 100644
--- a/dts/Bindings/iio/imu/inv_mpu6050.txt
+++ b/dts/Bindings/iio/imu/inv_mpu6050.txt
@@ -11,6 +11,7 @@ Required properties:
"invensense,mpu9250"
"invensense,mpu9255"
"invensense,icm20608"
+ "invensense,icm20602"
- reg : the I2C address of the sensor
- interrupts: interrupt mapping for IRQ. It should be configured with flags
IRQ_TYPE_LEVEL_HIGH, IRQ_TYPE_EDGE_RISING, IRQ_TYPE_LEVEL_LOW or
diff --git a/dts/Bindings/iio/light/max44009.txt b/dts/Bindings/iio/light/max44009.txt
new file mode 100644
index 0000000..4a98848
--- /dev/null
+++ b/dts/Bindings/iio/light/max44009.txt
@@ -0,0 +1,24 @@
+* MAX44009 Ambient Light Sensor
+
+Required properties:
+
+- compatible: should be "maxim,max44009"
+- reg: the I2C address of the device (default is <0x4a>)
+
+Optional properties:
+
+- interrupts: interrupt mapping for GPIO IRQ. Should be configured with
+ IRQ_TYPE_EDGE_FALLING.
+
+Refer to interrupt-controller/interrupts.txt for generic interrupt client
+node bindings.
+
+Example:
+
+light-sensor@4a {
+ compatible = "maxim,max44009";
+ reg = <0x4a>;
+
+ interrupt-parent = <&gpio1>;
+ interrupts = <17 IRQ_TYPE_EDGE_FALLING>;
+};
diff --git a/dts/Bindings/iio/st-sensors.txt b/dts/Bindings/iio/st-sensors.txt
index ddcb955..52ee4ba 100644
--- a/dts/Bindings/iio/st-sensors.txt
+++ b/dts/Bindings/iio/st-sensors.txt
@@ -77,3 +77,4 @@ Pressure sensors:
- st,lps22hb-press
- st,lps33hw
- st,lps35hw
+- st,lps22hh