1 files changed, 0 insertions, 94 deletions
diff --git a/dts/Bindings/input/ads7846.txt b/dts/Bindings/input/ads7846.txt
deleted file mode 100644
index 9fc47b006f..0000000000
--- a/dts/Bindings/input/ads7846.txt
+++ /dev/null
@@ -1,94 +0,0 @@
-Device tree bindings for TI's ADS7843, ADS7845, ADS7846, ADS7873, TSC2046
-SPI driven touch screen controllers.
-
-The node for this driver must be a child node of a SPI controller, hence
-all mandatory properties described in
-
-	Documentation/devicetree/bindings/spi/spi-bus.txt
-
-must be specified.
-
-Additional required properties:
-
-	compatible		Must be one of the following, depending on the
-				model:
-					"ti,tsc2046"
-					"ti,ads7843"
-					"ti,ads7845"
-					"ti,ads7846"
-					"ti,ads7873"
-
-	interrupt-parent
-	interrupts		An interrupt node describing the IRQ line the chip's
-				!PENIRQ pin is connected to.
-	vcc-supply		A regulator node for the supply voltage.
-
-
-Optional properties:
-
-	ti,vref-delay-usecs		vref supply delay in usecs, 0 for
-					external vref (u16).
-	ti,vref-mv			The VREF voltage, in millivolts (u16).
-					Set to 0 to use internal references
-					(ADS7846).
-	ti,keep-vref-on			set to keep vref on for differential
-					measurements as well
-	ti,swap-xy			swap x and y axis
-	ti,settle-delay-usec		Settling time of the analog signals;
-					a function of Vcc and the capacitance
-					on the X/Y drivers.  If set to non-zero,
-					two samples are taken with settle_delay
-					us apart, and the second one is used.
-					~150 uSec with 0.01uF caps (u16).
-	ti,penirq-recheck-delay-usecs	If set to non-zero, after samples are
-					taken this delay is applied and penirq
-					is rechecked, to help avoid false
-					events.  This value is affected by the
-					material used to build the touch layer
-					(u16).
-	ti,x-plate-ohms			Resistance of the X-plate,
-					in Ohms (u16).
-	ti,y-plate-ohms			Resistance of the Y-plate,
-					in Ohms (u16).
-	ti,x-min			Minimum value on the X axis (u16).
-	ti,y-min			Minimum value on the Y axis (u16).
-	ti,x-max			Maximum value on the X axis (u16).
-	ti,y-max			Minimum value on the Y axis (u16).
-	ti,pressure-min			Minimum reported pressure value
-					(threshold) - u16.
-	ti,pressure-max			Maximum reported pressure value (u16).
-	ti,debounce-max			Max number of additional readings per
-					sample (u16).
-	ti,debounce-tol			Tolerance used for filtering (u16).
-	ti,debounce-rep			Additional consecutive good readings
-					required after the first two (u16).
-	ti,pendown-gpio-debounce	Platform specific debounce time for the
-					pendown-gpio (u32).
-	pendown-gpio			GPIO handle describing the pin the !PENIRQ
-					line is connected to.
-	wakeup-source			use any event on touchscreen as wakeup event.
-					(Legacy property support: "linux,wakeup")
-
-
-Example for a TSC2046 chip connected to an McSPI controller of an OMAP SoC::
-
-	spi_controller {
-		tsc2046@0 {
-			reg = <0>;	/* CS0 */
-			compatible = "ti,tsc2046";
-			interrupt-parent = <&gpio1>;
-			interrupts = <8 0>;	/* BOOT6 / GPIO 8 */
-			spi-max-frequency = <1000000>;
-			pendown-gpio = <&gpio1 8 0>;
-			vcc-supply = <&reg_vcc3>;
-
-			ti,x-min = /bits/ 16 <0>;
-			ti,x-max = /bits/ 16 <8000>;
-			ti,y-min = /bits/ 16 <0>;
-			ti,y-max = /bits/ 16 <4800>;
-			ti,x-plate-ohms = /bits/ 16 <40>;
-			ti,pressure-max = /bits/ 16 <255>;
-
-			wakeup-source;
-		};
-	};