1 files changed, 0 insertions, 66 deletions
diff --git a/dts/Bindings/input/pwm-vibrator.txt b/dts/Bindings/input/pwm-vibrator.txt
deleted file mode 100644
index 88c775a3fe..0000000000
--- a/dts/Bindings/input/pwm-vibrator.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-* PWM vibrator device tree bindings
-
-Registers a PWM device as vibrator. It is expected, that the vibrator's
-strength increases based on the duty cycle of the enable PWM channel
-(100% duty cycle meaning strongest vibration, 0% meaning no vibration).
-
-The binding supports an optional direction PWM channel, that can be
-driven at fixed duty cycle. If available this is can be used to increase
-the vibration effect of some devices.
-
-Required properties:
-- compatible: should contain "pwm-vibrator"
-- pwm-names: Should contain "enable" and optionally "direction"
-- pwms: Should contain a PWM handle for each entry in pwm-names
-
-Optional properties:
-- vcc-supply: Phandle for the regulator supplying power
-- direction-duty-cycle-ns: Duty cycle of the direction PWM channel in
-                           nanoseconds, defaults to 50% of the channel's
-			   period.
-
-Example from Motorola Droid 4:
-
-&omap4_pmx_core {
-	vibrator_direction_pin: pinmux_vibrator_direction_pin {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0x1ce, PIN_OUTPUT | MUX_MODE1) /* dmtimer8_pwm_evt (gpio_27) */
-		>;
-	};
-
-	vibrator_enable_pin: pinmux_vibrator_enable_pin {
-		pinctrl-single,pins = <
-		OMAP4_IOPAD(0X1d0, PIN_OUTPUT | MUX_MODE1) /* dmtimer9_pwm_evt (gpio_28) */
-		>;
-	};
-};
-
-/ {
-	pwm8: dmtimer-pwm {
-		pinctrl-names = "default";
-		pinctrl-0 = <&vibrator_direction_pin>;
-
-		compatible = "ti,omap-dmtimer-pwm";
-		#pwm-cells = <3>;
-		ti,timers = <&timer8>;
-		ti,clock-source = <0x01>;
-	};
-
-	pwm9: dmtimer-pwm {
-		pinctrl-names = "default";
-		pinctrl-0 = <&vibrator_enable_pin>;
-
-		compatible = "ti,omap-dmtimer-pwm";
-		#pwm-cells = <3>;
-		ti,timers = <&timer9>;
-		ti,clock-source = <0x01>;
-	};
-
-	vibrator {
-		compatible = "pwm-vibrator";
-		pwms = <&pwm9 0 1000000000 0>,
-                       <&pwm8 0 1000000000 0>;
-		pwm-names = "enable", "direction";
-		direction-duty-cycle-ns = <1000000000>;
-	};
-};