diff options
Diffstat (limited to 'dts/Bindings/input/touchscreen/chipone_icn8318.txt')
| -rw-r--r-- | dts/Bindings/input/touchscreen/chipone_icn8318.txt | 44 |
1 files changed, 0 insertions, 44 deletions
diff --git a/dts/Bindings/input/touchscreen/chipone_icn8318.txt b/dts/Bindings/input/touchscreen/chipone_icn8318.txt deleted file mode 100644 index 38b0603f65..0000000000 --- a/dts/Bindings/input/touchscreen/chipone_icn8318.txt +++ /dev/null @@ -1,44 +0,0 @@ -* ChipOne icn8318 I2C touchscreen controller - -Required properties: - - compatible : "chipone,icn8318" - - reg : I2C slave address of the chip (0x40) - - interrupts : interrupt specification for the icn8318 interrupt - - wake-gpios : GPIO specification for the WAKE input - - touchscreen-size-x : horizontal resolution of touchscreen (in pixels) - - touchscreen-size-y : vertical resolution of touchscreen (in pixels) - -Optional properties: - - pinctrl-names : should be "default" - - pinctrl-0: : a phandle pointing to the pin settings for the - control gpios - - touchscreen-fuzz-x : horizontal noise value of the absolute input - device (in pixels) - - touchscreen-fuzz-y : vertical noise value of the absolute input - device (in pixels) - - touchscreen-inverted-x : X axis is inverted (boolean) - - touchscreen-inverted-y : Y axis is inverted (boolean) - - touchscreen-swapped-x-y : X and Y axis are swapped (boolean) - Swapping is done after inverting the axis - -Example: - -i2c@00000000 { - /* ... */ - - chipone_icn8318@40 { - compatible = "chipone,icn8318"; - reg = <0x40>; - interrupt-parent = <&pio>; - interrupts = <9 IRQ_TYPE_EDGE_FALLING>; /* EINT9 (PG9) */ - pinctrl-names = "default"; - pinctrl-0 = <&ts_wake_pin_p66>; - wake-gpios = <&pio 1 3 GPIO_ACTIVE_HIGH>; /* PB3 */ - touchscreen-size-x = <800>; - touchscreen-size-y = <480>; - touchscreen-inverted-x; - touchscreen-swapped-x-y; - }; - - /* ... */ -}; |