1 files changed, 0 insertions, 93 deletions
diff --git a/dts/Bindings/input/touchscreen/cyttsp.txt b/dts/Bindings/input/touchscreen/cyttsp.txt
deleted file mode 100644
index 6ee274aa8b..0000000000
--- a/dts/Bindings/input/touchscreen/cyttsp.txt
+++ /dev/null
@@ -1,93 +0,0 @@
-* Cypress cyttsp touchscreen controller
-
-Required properties:
- - compatible		: must be "cypress,cyttsp-i2c" or "cypress,cyttsp-spi"
- - reg			: Device I2C address or SPI chip select number
- - spi-max-frequency	: Maximum SPI clocking speed of the device (for cyttsp-spi)
- - interrupts		: (gpio) interrupt to which the chip is connected
-			  (see interrupt binding[0]).
- - bootloader-key	: the 8-byte bootloader key that is required to switch
-			  the chip from bootloader mode (default mode) to
-			  application mode.
-			  This property has to be specified as an array of 8
-			  '/bits/ 8' values.
-
-Optional properties:
- - reset-gpios		: the reset gpio the chip is connected to
-			  (see GPIO binding[1] for more details).
- - touchscreen-size-x	: horizontal resolution of touchscreen (in pixels)
- - touchscreen-size-y	: vertical resolution of touchscreen (in pixels)
- - touchscreen-fuzz-x	: horizontal noise value of the absolute input device
-			  (in pixels)
- - touchscreen-fuzz-y	: vertical noise value of the absolute input device
-			  (in pixels)
- - active-distance	: the distance in pixels beyond which a touch must move
-			  before movement is detected and reported by the device.
-			  Valid values: 0-15.
- - active-interval-ms	: the minimum period in ms between consecutive
-			  scanning/processing cycles when the chip is in active mode.
-			  Valid values: 0-255.
- - lowpower-interval-ms	: the minimum period in ms between consecutive
-			  scanning/processing cycles when the chip is in low-power mode.
-			  Valid values: 0-2550
- - touch-timeout-ms	: minimum time in ms spent in the active power state while no
-			  touches are detected before entering low-power mode.
-			  Valid values: 0-2550
- - use-handshake	: enable register-based handshake (boolean). This should
-			  only be used if the chip is configured to use 'blocking
-			  communication with timeout' (in this case the device
-			  generates an interrupt at the end of every
-			  scanning/processing cycle).
-
-[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
-[1]: Documentation/devicetree/bindings/gpio/gpio.txt
-
-Example:
-	&i2c1 {
-		/* ... */
-		cyttsp@a {
-			compatible = "cypress,cyttsp-i2c";
-			reg = <0xa>;
-			interrupt-parent = <&gpio0>;
-			interrupts = <28 0>;
-			reset-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
-
-			touchscreen-size-x = <800>;
-			touchscreen-size-y = <480>;
-			touchscreen-fuzz-x = <4>;
-			touchscreen-fuzz-y = <7>;
-
-			bootloader-key = /bits/ 8 <0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08>;
-			active-distance = <8>;
-			active-interval-ms = <0>;
-			lowpower-interval-ms = <200>;
-			touch-timeout-ms = <100>;
-		};
-
-		/* ... */
-	};
-
-	&mcspi1 {
-		/* ... */
-		cyttsp@0 {
-			compatible = "cypress,cyttsp-spi";
-			spi-max-frequency = <6000000>;
-			reg = <0>;
-			interrupt-parent = <&gpio0>;
-			interrupts = <28 0>;
-			reset-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
-
-			touchscreen-size-x = <800>;
-			touchscreen-size-y = <480>;
-			touchscreen-fuzz-x = <4>;
-			touchscreen-fuzz-y = <7>;
-
-			bootloader-key = /bits/ 8 <0x01 0x02 0x03 0x04 0x05 0x06 0x07 0x08>;
-			active-distance = <8>;
-			active-interval-ms = <0>;
-			lowpower-interval-ms = <200>;
-			touch-timeout-ms = <100>;
-		};
-
-		/* ... */
-	};