diff options
Diffstat (limited to 'dts/Bindings/input')
| -rw-r--r-- | dts/Bindings/input/gpio-vibrator.yaml | 37 | ||||
| -rw-r--r-- | dts/Bindings/input/lpc32xx-key.txt | 5 | ||||
| -rw-r--r-- | dts/Bindings/input/max77650-onkey.txt | 26 | ||||
| -rw-r--r-- | dts/Bindings/input/microchip,qt1050.txt | 78 | ||||
| -rw-r--r-- | dts/Bindings/input/sun4i-lradc-keys.txt | 6 | ||||
| -rw-r--r-- | dts/Bindings/input/touchscreen/goodix.txt | 3 | ||||
| -rw-r--r-- | dts/Bindings/input/touchscreen/iqs5xx.txt | 80 |
7 files changed, 232 insertions, 3 deletions
diff --git a/dts/Bindings/input/gpio-vibrator.yaml b/dts/Bindings/input/gpio-vibrator.yaml new file mode 100644 index 0000000000..903475f52d --- /dev/null +++ b/dts/Bindings/input/gpio-vibrator.yaml @@ -0,0 +1,37 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/bindings/input/gpio-vibrator.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: GPIO vibrator + +maintainers: + - Luca Weiss <luca@z3ntu.xyz> + +description: |+ + Registers a GPIO device as vibrator, where the on/off capability is controlled by a GPIO. + +properties: + compatible: + const: gpio-vibrator + + enable-gpios: + maxItems: 1 + + vcc-supply: + description: Regulator that provides power + +required: + - compatible + - enable-gpios + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + + vibrator { + compatible = "gpio-vibrator"; + enable-gpios = <&msmgpio 86 GPIO_ACTIVE_HIGH>; + vcc-supply = <&pm8941_l18>; + }; diff --git a/dts/Bindings/input/lpc32xx-key.txt b/dts/Bindings/input/lpc32xx-key.txt index bcf62f8563..2b075a080d 100644 --- a/dts/Bindings/input/lpc32xx-key.txt +++ b/dts/Bindings/input/lpc32xx-key.txt @@ -8,6 +8,7 @@ Required Properties: - reg: Physical base address of the controller and length of memory mapped region. - interrupts: The interrupt number to the cpu. +- clocks: phandle to clock controller plus clock-specifier pair - nxp,debounce-delay-ms: Debounce delay in ms - nxp,scan-delay-ms: Repeated scan period in ms - linux,keymap: the key-code to be reported when the key is pressed @@ -22,7 +23,9 @@ Example: key@40050000 { compatible = "nxp,lpc3220-key"; reg = <0x40050000 0x1000>; - interrupts = <54 0>; + clocks = <&clk LPC32XX_CLK_KEY>; + interrupt-parent = <&sic1>; + interrupts = <22 IRQ_TYPE_LEVEL_HIGH>; keypad,num-rows = <1>; keypad,num-columns = <1>; nxp,debounce-delay-ms = <3>; diff --git a/dts/Bindings/input/max77650-onkey.txt b/dts/Bindings/input/max77650-onkey.txt new file mode 100644 index 0000000000..477dc74f45 --- /dev/null +++ b/dts/Bindings/input/max77650-onkey.txt @@ -0,0 +1,26 @@ +Onkey driver for MAX77650 PMIC from Maxim Integrated. + +This module is part of the MAX77650 MFD device. For more details +see Documentation/devicetree/bindings/mfd/max77650.txt. + +The onkey controller is represented as a sub-node of the PMIC node on +the device tree. + +Required properties: +-------------------- +- compatible: Must be "maxim,max77650-onkey". + +Optional properties: +- linux,code: The key-code to be reported when the key is pressed. + Defaults to KEY_POWER. +- maxim,onkey-slide: The system's button is a slide switch, not the default + push button. + +Example: +-------- + + onkey { + compatible = "maxim,max77650-onkey"; + linux,code = <KEY_END>; + maxim,onkey-slide; + }; diff --git a/dts/Bindings/input/microchip,qt1050.txt b/dts/Bindings/input/microchip,qt1050.txt new file mode 100644 index 0000000000..80e75f9625 --- /dev/null +++ b/dts/Bindings/input/microchip,qt1050.txt @@ -0,0 +1,78 @@ +Microchip AT42QT1050 Five-channel Touch Sensor IC + +The AT42QT1050 (QT1050) is a QTouchADC sensor device. The device can sense from +one to five keys, dependent on mode. The QT1050 includes all signal processing +functions necessary to provide stable sensing under a wide variety of changing +conditions, and the outputs are fully debounced. + +The touchkey device node should be placed inside an I2C bus node. + +Required properties: +- compatible: Must be "microchip,qt1050" +- reg: The I2C address of the device +- interrupts: The sink for the touchpad's IRQ output, + see ../interrupt-controller/interrupts.txt + +Optional properties: +- wakeup-source: touch keys can be used as a wakeup source + +Each button (key) is represented as a sub-node: + +Each not specified key or key with linux,code set to KEY_RESERVED gets disabled +in HW. + +Subnode properties: +- linux,code: Keycode to emit. +- reg: The key number. Valid values: 0, 1, 2, 3, 4. + +Optional subnode-properties: + +If a optional property is missing or has a invalid value the default value is +taken. + +- microchip,pre-charge-time-ns: + Each touchpad need some time to precharge. The value depends on the mechanical + layout. + Valid value range: 0 - 637500; values must be a multiple of 2500; + default is 0. +- microchip,average-samples: + Number of data samples which are averaged for each read. + Valid values: 1, 4, 16, 64, 256, 1024, 4096, 16384; default is 1. +- microchip,average-scaling: + The scaling factor which is used to scale the average-samples. + Valid values: 1, 2, 4, 8, 16, 32, 64, 128; default is 1. +- microchip,threshold: + Number of counts to register a touch detection. + Valid value range: 0 - 255; default is 20. + +Example: +QT1050 with 3 non continuous keys, key2 and key4 are disabled. + +touchkeys@41 { + compatible = "microchip,qt1050"; + reg = <0x41>; + interrupt-parent = <&gpio0>; + interrupts = <17 IRQ_TYPE_EDGE_FALLING>; + + up@0 { + reg = <0>; + linux,code = <KEY_UP>; + microchip,average-samples = <64>; + microchip,average-scaling = <16>; + microchip,pre-charge-time-ns = <10000>; + }; + + right@1 { + reg = <1>; + linux,code = <KEY_RIGHT>; + microchip,average-samples = <64>; + microchip,average-scaling = <8>; + }; + + down@3 { + reg = <3>; + linux,code = <KEY_DOWN>; + microchip,average-samples = <256>; + microchip,average-scaling = <16>; + }; +}; diff --git a/dts/Bindings/input/sun4i-lradc-keys.txt b/dts/Bindings/input/sun4i-lradc-keys.txt index 1458c3179a..496125c6bf 100644 --- a/dts/Bindings/input/sun4i-lradc-keys.txt +++ b/dts/Bindings/input/sun4i-lradc-keys.txt @@ -2,12 +2,14 @@ Allwinner sun4i low res adc attached tablet keys ------------------------------------------------ Required properties: - - compatible: "allwinner,sun4i-a10-lradc-keys" + - compatible: should be one of the following string: + "allwinner,sun4i-a10-lradc-keys" + "allwinner,sun8i-a83t-r-lradc" - reg: mmio address range of the chip - interrupts: interrupt to which the chip is connected - vref-supply: powersupply for the lradc reference voltage -Each key is represented as a sub-node of "allwinner,sun4i-a10-lradc-keys": +Each key is represented as a sub-node of the compatible mentioned above: Required subnode-properties: - label: Descriptive name of the key. diff --git a/dts/Bindings/input/touchscreen/goodix.txt b/dts/Bindings/input/touchscreen/goodix.txt index 8cf0b4d38a..fc03ea4cf5 100644 --- a/dts/Bindings/input/touchscreen/goodix.txt +++ b/dts/Bindings/input/touchscreen/goodix.txt @@ -3,6 +3,7 @@ Device tree bindings for Goodix GT9xx series touchscreen controller Required properties: - compatible : Should be "goodix,gt1151" + or "goodix,gt5663" or "goodix,gt5688" or "goodix,gt911" or "goodix,gt9110" @@ -19,6 +20,8 @@ Optional properties: - irq-gpios : GPIO pin used for IRQ. The driver uses the interrupt gpio pin as output to reset the device. - reset-gpios : GPIO pin used for reset + - AVDD28-supply : Analog power supply regulator on AVDD28 pin + - VDDIO-supply : GPIO power supply regulator on VDDIO pin - touchscreen-inverted-x - touchscreen-inverted-y - touchscreen-size-x diff --git a/dts/Bindings/input/touchscreen/iqs5xx.txt b/dts/Bindings/input/touchscreen/iqs5xx.txt new file mode 100644 index 0000000000..efa0820e24 --- /dev/null +++ b/dts/Bindings/input/touchscreen/iqs5xx.txt @@ -0,0 +1,80 @@ +Azoteq IQS550/572/525 Trackpad/Touchscreen Controller + +Required properties: + +- compatible : Must be equal to one of the following: + "azoteq,iqs550" + "azoteq,iqs572" + "azoteq,iqs525" + +- reg : I2C slave address for the device. + +- interrupts : GPIO to which the device's active-high RDY + output is connected (see [0]). + +- reset-gpios : GPIO to which the device's active-low NRST + input is connected (see [1]). + +Optional properties: + +- touchscreen-min-x : See [2]. + +- touchscreen-min-y : See [2]. + +- touchscreen-size-x : See [2]. If this property is omitted, the + maximum x-coordinate is specified by the + device's "X Resolution" register. + +- touchscreen-size-y : See [2]. If this property is omitted, the + maximum y-coordinate is specified by the + device's "Y Resolution" register. + +- touchscreen-max-pressure : See [2]. Pressure is expressed as the sum of + the deltas across all channels impacted by a + touch event. A channel's delta is calculated + as its count value minus a reference, where + the count value is inversely proportional to + the channel's capacitance. + +- touchscreen-fuzz-x : See [2]. + +- touchscreen-fuzz-y : See [2]. + +- touchscreen-fuzz-pressure : See [2]. + +- touchscreen-inverted-x : See [2]. Inversion is applied relative to that + which may already be specified by the device's + FLIP_X and FLIP_Y register fields. + +- touchscreen-inverted-y : See [2]. Inversion is applied relative to that + which may already be specified by the device's + FLIP_X and FLIP_Y register fields. + +- touchscreen-swapped-x-y : See [2]. Swapping is applied relative to that + which may already be specified by the device's + SWITCH_XY_AXIS register field. + +[0]: Documentation/devicetree/bindings/interrupt-controller/interrupts.txt +[1]: Documentation/devicetree/bindings/gpio/gpio.txt +[2]: Documentation/devicetree/bindings/input/touchscreen/touchscreen.txt + +Example: + + &i2c1 { + /* ... */ + + touchscreen@74 { + compatible = "azoteq,iqs550"; + reg = <0x74>; + interrupt-parent = <&gpio>; + interrupts = <17 4>; + reset-gpios = <&gpio 27 1>; + + touchscreen-size-x = <640>; + touchscreen-size-y = <480>; + + touchscreen-max-pressure = <16000>; + }; + + /* ... */ + }; |