diff options
Diffstat (limited to 'dts/Bindings/input')
| -rw-r--r-- | dts/Bindings/input/gpio-vibrator.yaml | 2 | ||||
| -rw-r--r-- | dts/Bindings/input/iqs62x-keys.yaml | 132 | ||||
| -rw-r--r-- | dts/Bindings/input/max77650-onkey.yaml | 3 | ||||
| -rw-r--r-- | dts/Bindings/input/st,stpmic1-onkey.txt | 28 | ||||
| -rw-r--r-- | dts/Bindings/input/touchscreen/edt-ft5x06.txt | 77 | ||||
| -rw-r--r-- | dts/Bindings/input/touchscreen/edt-ft5x06.yaml | 125 | ||||
| -rw-r--r-- | dts/Bindings/input/touchscreen/goodix.yaml | 2 |
7 files changed, 264 insertions, 105 deletions
diff --git a/dts/Bindings/input/gpio-vibrator.yaml b/dts/Bindings/input/gpio-vibrator.yaml index b98bf9363c..2384465eaa 100644 --- a/dts/Bindings/input/gpio-vibrator.yaml +++ b/dts/Bindings/input/gpio-vibrator.yaml @@ -26,6 +26,8 @@ required: - compatible - enable-gpios +additionalProperties: false + examples: - | #include <dt-bindings/gpio/gpio.h> diff --git a/dts/Bindings/input/iqs62x-keys.yaml b/dts/Bindings/input/iqs62x-keys.yaml new file mode 100644 index 0000000000..5625c22290 --- /dev/null +++ b/dts/Bindings/input/iqs62x-keys.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/iqs62x-keys.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Azoteq IQS620A/621/622/624/625 Keys and Switches + +maintainers: + - Jeff LaBundy <jeff@labundy.com> + +description: | + The Azoteq IQS620A, IQS621, IQS622, IQS624 and IQS625 multi-function sensors + feature a variety of self-capacitive, mutual-inductive and Hall-effect sens- + ing capabilities that can facilitate a variety of contactless key and switch + applications. + + These functions are collectively represented by a "keys" child node from the + parent MFD driver. See Documentation/devicetree/bindings/mfd/iqs62x.yaml for + further details and examples. Sensor hardware configuration (self-capacitive + vs. mutual-inductive, etc.) is selected based on the device's firmware. + +properties: + compatible: + enum: + - azoteq,iqs620a-keys + - azoteq,iqs621-keys + - azoteq,iqs622-keys + - azoteq,iqs624-keys + - azoteq,iqs625-keys + + linux,keycodes: + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32-array + - minItems: 1 + maxItems: 16 + description: | + Specifies the numeric keycodes associated with each available touch or + proximity event according to the following table. An 'x' indicates the + event is supported for a given device. Specify 0 for unused events. + + ------------------------------------------------------------------------- + | # | Event | IQS620A | IQS621 | IQS622 | IQS624 | IQS625 | + ------------------------------------------------------------------------- + | 0 | CH0 Touch | x | x | x | x | x | + | | Antenna 1 Touch* | x | | | | | + ------------------------------------------------------------------------- + | 1 | CH0 Proximity | x | x | x | x | x | + | | Antenna 1 Prox.* | x | | | | | + ------------------------------------------------------------------------- + | 2 | CH1 Touch | x | x | x | x | x | + | | Ant. 1 Deep Touch* | x | | | | | + ------------------------------------------------------------------------- + | 3 | CH1 Proximity | x | x | x | x | x | + ------------------------------------------------------------------------- + | 4 | CH2 Touch | x | | | | | + ------------------------------------------------------------------------- + | 5 | CH2 Proximity | x | | | | | + | | Antenna 2 Prox.* | x | | | | | + ------------------------------------------------------------------------- + | 6 | Metal (+) Touch** | x | x | | | | + | | Ant. 2 Deep Touch* | x | | | | | + ------------------------------------------------------------------------- + | 7 | Metal (+) Prox.** | x | x | | | | + | | Antenna 2 Touch* | x | | | | | + ------------------------------------------------------------------------- + | 8 | Metal (-) Touch** | x | x | | | | + ------------------------------------------------------------------------- + | 9 | Metal (-) Prox.** | x | x | | | | + ------------------------------------------------------------------------- + | 10 | SAR Active*** | x | | x | | | + ------------------------------------------------------------------------- + | 11 | SAR Quick Rel.*** | x | | x | | | + ------------------------------------------------------------------------- + | 12 | SAR Movement*** | x | | x | | | + ------------------------------------------------------------------------- + | 13 | SAR Filter Halt*** | x | | x | | | + ------------------------------------------------------------------------- + | 14 | Wheel Up | | | | x | | + ------------------------------------------------------------------------- + | 15 | Wheel Down | | | | x | | + ------------------------------------------------------------------------- + * Two-channel SAR. Replaces CH0-2 plus metal touch and proximity events + if enabled via firmware. + ** "+" and "-" refer to the polarity of a channel's delta (LTA - counts), + where "LTA" is defined as the channel's long-term average. + *** One-channel SAR. Replaces CH0-2 touch and proximity events if enabled + via firmware. + +patternProperties: + "^hall-switch-(north|south)$": + type: object + description: + Represents north/south-field Hall-effect sensor touch or proximity + events. Note that north/south-field orientation is reversed on the + IQS620AXzCSR device due to its flip-chip package. + + properties: + linux,code: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Numeric switch code associated with the event. + + azoteq,use-prox: + $ref: /schemas/types.yaml#/definitions/flag + description: + If present, specifies that Hall-effect sensor reporting should + use the device's wide-range proximity threshold instead of its + close-range touch threshold (default). + + required: + - linux,code + + additionalProperties: false + +if: + properties: + compatible: + contains: + enum: + - azoteq,iqs624-keys + - azoteq,iqs625-keys +then: + patternProperties: + "^hall-switch-(north|south)$": false + +required: + - compatible + - linux,keycodes + +additionalProperties: false + +... diff --git a/dts/Bindings/input/max77650-onkey.yaml b/dts/Bindings/input/max77650-onkey.yaml index 2f2e0b6ebb..3a2ad6ec64 100644 --- a/dts/Bindings/input/max77650-onkey.yaml +++ b/dts/Bindings/input/max77650-onkey.yaml @@ -33,3 +33,6 @@ properties: required: - compatible +additionalProperties: false + +... diff --git a/dts/Bindings/input/st,stpmic1-onkey.txt b/dts/Bindings/input/st,stpmic1-onkey.txt deleted file mode 100644 index eb8e83736c..0000000000 --- a/dts/Bindings/input/st,stpmic1-onkey.txt +++ /dev/null @@ -1,28 +0,0 @@ -STMicroelectronics STPMIC1 Onkey - -Required properties: - -- compatible = "st,stpmic1-onkey"; -- interrupts: interrupt line to use -- interrupt-names = "onkey-falling", "onkey-rising" - onkey-falling: happens when onkey is pressed; IT_PONKEY_F of pmic - onkey-rising: happens when onkey is released; IT_PONKEY_R of pmic - -Optional properties: - -- st,onkey-clear-cc-flag: onkey is able power on after an - over-current shutdown event. -- st,onkey-pu-inactive: onkey pull up is not active -- power-off-time-sec: Duration in seconds which the key should be kept - pressed for device to power off automatically (from 1 to 16 seconds). - see See Documentation/devicetree/bindings/input/input.yaml - -Example: - -onkey { - compatible = "st,stpmic1-onkey"; - interrupt-parent = <&pmic>; - interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>; - interrupt-names = "onkey-falling", "onkey-rising"; - power-off-time-sec = <10>; -}; diff --git a/dts/Bindings/input/touchscreen/edt-ft5x06.txt b/dts/Bindings/input/touchscreen/edt-ft5x06.txt deleted file mode 100644 index 0e57315e9c..0000000000 --- a/dts/Bindings/input/touchscreen/edt-ft5x06.txt +++ /dev/null @@ -1,77 +0,0 @@ -FocalTech EDT-FT5x06 Polytouch driver -===================================== - -There are 5 variants of the chip for various touch panel sizes -FT5206GE1 2.8" .. 3.8" -FT5306DE4 4.3" .. 7" -FT5406EE8 7" .. 8.9" -FT5506EEG 7" .. 8.9" -FT5726NEI 5.7” .. 11.6" - -The software interface is identical for all those chips, so that -currently there is no need for the driver to distinguish between the -different chips. Nevertheless distinct compatible strings are used so -that a distinction can be added if necessary without changing the DT -bindings. - - -Required properties: - - compatible: "edt,edt-ft5206" - or: "edt,edt-ft5306" - or: "edt,edt-ft5406" - or: "edt,edt-ft5506" - or: "evervision,ev-ft5726" - or: "focaltech,ft6236" - - - reg: I2C slave address of the chip (0x38) - - interrupts: interrupt specification for the touchdetect - interrupt - -Optional properties: - - reset-gpios: GPIO specification for the RESET input - - wake-gpios: GPIO specification for the WAKE input - - vcc-supply: Regulator that supplies the touchscreen - - - pinctrl-names: should be "default" - - pinctrl-0: a phandle pointing to the pin settings for the - control gpios - - - wakeup-source: If present the device will act as wakeup-source - - - threshold: allows setting the "click"-threshold in the range - from 0 to 80. - - - gain: allows setting the sensitivity in the range from 0 to - 31. Note that lower values indicate higher - sensitivity. - - - offset: allows setting the edge compensation in the range from - 0 to 31. - - - offset-x: Same as offset, but applies only to the horizontal position. - Range from 0 to 80, only supported by evervision,ev-ft5726 - devices. - - - offset-y: Same as offset, but applies only to the vertical position. - Range from 0 to 80, only supported by evervision,ev-ft5726 - devices. - - - touchscreen-size-x : See touchscreen.txt - - touchscreen-size-y : See touchscreen.txt - - touchscreen-fuzz-x : See touchscreen.txt - - touchscreen-fuzz-y : See touchscreen.txt - - touchscreen-inverted-x : See touchscreen.txt - - touchscreen-inverted-y : See touchscreen.txt - - touchscreen-swapped-x-y : See touchscreen.txt - -Example: - polytouch: edt-ft5x06@38 { - compatible = "edt,edt-ft5406", "edt,edt-ft5x06"; - reg = <0x38>; - pinctrl-names = "default"; - pinctrl-0 = <&edt_ft5x06_pins>; - interrupt-parent = <&gpio2>; - interrupts = <5 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; - wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>; - }; diff --git a/dts/Bindings/input/touchscreen/edt-ft5x06.yaml b/dts/Bindings/input/touchscreen/edt-ft5x06.yaml new file mode 100644 index 0000000000..8d58709d4b --- /dev/null +++ b/dts/Bindings/input/touchscreen/edt-ft5x06.yaml @@ -0,0 +1,125 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/input/touchscreen/edt-ft5x06.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: FocalTech EDT-FT5x06 Polytouch Bindings + +description: | + There are 5 variants of the chip for various touch panel sizes + FT5206GE1 2.8" .. 3.8" + FT5306DE4 4.3" .. 7" + FT5406EE8 7" .. 8.9" + FT5506EEG 7" .. 8.9" + FT5726NEI 5.7” .. 11.6" + +maintainers: + - Dmitry Torokhov <dmitry.torokhov@gmail.com> + +allOf: + - $ref: touchscreen.yaml# + - if: + properties: + compatible: + contains: + enum: + - evervision,ev-ft5726 + + then: + properties: + offset-x: true + offset-y: true + +properties: + compatible: + enum: + - edt,edt-ft5206 + - edt,edt-ft5306 + - edt,edt-ft5406 + - edt,edt-ft5506 + - evervision,ev-ft5726 + - focaltech,ft6236 + + reg: + const: 0x38 + + interrupts: + maxItems: 1 + + reset-gpios: + maxItems: 1 + + wake-gpios: + maxItems: 1 + + wakeup-source: true + + vcc-supply: + maxItems: 1 + + gain: + description: Allows setting the sensitivity in the range from 0 to 31. + Note that lower values indicate higher sensitivity. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + - maximum: 31 + + offset: + description: Allows setting the edge compensation in the range from 0 to 31. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + - maximum: 31 + + offset-x: + description: Same as offset, but applies only to the horizontal position. + Range from 0 to 80, only supported by evervision,ev-ft5726 devices. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + - maximum: 80 + + offset-y: + description: Same as offset, but applies only to the vertical position. + Range from 0 to 80, only supported by evervision,ev-ft5726 devices. + allOf: + - $ref: /schemas/types.yaml#/definitions/uint32 + - minimum: 0 + - maximum: 80 + + touchscreen-size-x: true + touchscreen-size-y: true + touchscreen-fuzz-x: true + touchscreen-fuzz-y: true + touchscreen-inverted-x: true + touchscreen-inverted-y: true + touchscreen-swapped-x-y: true + interrupt-controller: true + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c@00000000 { + #address-cells = <1>; + #size-cells = <0>; + edt-ft5x06@38 { + compatible = "edt,edt-ft5406"; + reg = <0x38>; + interrupt-parent = <&gpio2>; + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; + wake-gpios = <&gpio4 9 GPIO_ACTIVE_HIGH>; + }; + }; + +... diff --git a/dts/Bindings/input/touchscreen/goodix.yaml b/dts/Bindings/input/touchscreen/goodix.yaml index c99ed3934d..c8ea9434c9 100644 --- a/dts/Bindings/input/touchscreen/goodix.yaml +++ b/dts/Bindings/input/touchscreen/goodix.yaml @@ -21,6 +21,8 @@ properties: - goodix,gt911 - goodix,gt9110 - goodix,gt912 + - goodix,gt9147 + - goodix,gt917s - goodix,gt927 - goodix,gt9271 - goodix,gt928 |