summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt')
-rw-r--r--dts/Bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt57
1 files changed, 57 insertions, 0 deletions
diff --git a/dts/Bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt b/dts/Bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt
new file mode 100644
index 0000000000..4040905388
--- /dev/null
+++ b/dts/Bindings/interrupt-controller/brcm,bcm6345-l1-intc.txt
@@ -0,0 +1,57 @@
+Broadcom BCM6345-style Level 1 interrupt controller
+
+This block is a first level interrupt controller that is typically connected
+directly to one of the HW INT lines on each CPU.
+
+Key elements of the hardware design include:
+
+- 32, 64 or 128 incoming level IRQ lines
+
+- Most onchip peripherals are wired directly to an L1 input
+
+- A separate instance of the register set for each CPU, allowing individual
+ peripheral IRQs to be routed to any CPU
+
+- Contains one or more enable/status word pairs per CPU
+
+- No atomic set/clear operations
+
+- No polarity/level/edge settings
+
+- No FIFO or priority encoder logic; software is expected to read all
+ 2-4 status words to determine which IRQs are pending
+
+Required properties:
+
+- compatible: should be "brcm,bcm<soc>-l1-intc", "brcm,bcm6345-l1-intc"
+- reg: specifies the base physical address and size of the registers;
+ the number of supported IRQs is inferred from the size argument
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: specifies the number of cells needed to encode an interrupt
+ source, should be 1.
+- interrupt-parent: specifies the phandle to the parent interrupt controller(s)
+ this one is cascaded from
+- interrupts: specifies the interrupt line(s) in the interrupt-parent controller
+ node; valid values depend on the type of parent interrupt controller
+
+If multiple reg ranges and interrupt-parent entries are present on an SMP
+system, the driver will allow IRQ SMP affinity to be set up through the
+/proc/irq/ interface. In the simplest possible configuration, only one
+reg range and one interrupt-parent is needed.
+
+The driver operates in native CPU endian by default, there is no support for
+specifying an alternative endianness.
+
+Example:
+
+periph_intc: interrupt-controller@10000000 {
+ compatible = "brcm,bcm63168-l1-intc", "brcm,bcm6345-l1-intc";
+ reg = <0x10000020 0x20>,
+ <0x10000040 0x20>;
+
+ interrupt-controller;
+ #interrupt-cells = <1>;
+
+ interrupt-parent = <&cpu_intc>;
+ interrupts = <2>, <3>;
+};