summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/interrupt-controller/mrvl,intc.txt
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/interrupt-controller/mrvl,intc.txt')
-rw-r--r--dts/Bindings/interrupt-controller/mrvl,intc.txt60
1 files changed, 60 insertions, 0 deletions
diff --git a/dts/Bindings/interrupt-controller/mrvl,intc.txt b/dts/Bindings/interrupt-controller/mrvl,intc.txt
new file mode 100644
index 0000000..8b53273
--- /dev/null
+++ b/dts/Bindings/interrupt-controller/mrvl,intc.txt
@@ -0,0 +1,60 @@
+* Marvell MMP Interrupt controller
+
+Required properties:
+- compatible : Should be "mrvl,mmp-intc", "mrvl,mmp2-intc" or
+ "mrvl,mmp2-mux-intc"
+- reg : Address and length of the register set of the interrupt controller.
+ If the interrupt controller is intc, address and length means the range
+ of the whold interrupt controller. If the interrupt controller is mux-intc,
+ address and length means one register. Since address of mux-intc is in the
+ range of intc. mux-intc is secondary interrupt controller.
+- reg-names : Name of the register set of the interrupt controller. It's
+ only required in mux-intc interrupt controller.
+- interrupts : Should be the port interrupt shared by mux interrupts. It's
+ only required in mux-intc interrupt controller.
+- interrupt-controller : Identifies the node as an interrupt controller.
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source.
+- mrvl,intc-nr-irqs : Specifies the number of interrupts in the interrupt
+ controller.
+- mrvl,clr-mfp-irq : Specifies the interrupt that needs to clear MFP edge
+ detection first.
+
+Example:
+ intc: interrupt-controller@d4282000 {
+ compatible = "mrvl,mmp2-intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xd4282000 0x1000>;
+ mrvl,intc-nr-irqs = <64>;
+ };
+
+ intcmux4@d4282150 {
+ compatible = "mrvl,mmp2-mux-intc";
+ interrupts = <4>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x150 0x4>, <0x168 0x4>;
+ reg-names = "mux status", "mux mask";
+ mrvl,intc-nr-irqs = <2>;
+ };
+
+* Marvell Orion Interrupt controller
+
+Required properties
+- compatible : Should be "marvell,orion-intc".
+- #interrupt-cells: Specifies the number of cells needed to encode an
+ interrupt source. Supported value is <1>.
+- interrupt-controller : Declare this node to be an interrupt controller.
+- reg : Interrupt mask address. A list of 4 byte ranges, one per controller.
+ One entry in the list represents 32 interrupts.
+
+Example:
+
+ intc: interrupt-controller {
+ compatible = "marvell,orion-intc", "marvell,intc";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0xfed20204 0x04>,
+ <0xfed20214 0x04>;
+ };