summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/interrupt-controller
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/interrupt-controller')
-rw-r--r--dts/Bindings/interrupt-controller/atmel,aic.txt42
-rw-r--r--dts/Bindings/interrupt-controller/opencores,or1k-pic.txt23
2 files changed, 65 insertions, 0 deletions
diff --git a/dts/Bindings/interrupt-controller/atmel,aic.txt b/dts/Bindings/interrupt-controller/atmel,aic.txt
new file mode 100644
index 0000000..2742e9c
--- /dev/null
+++ b/dts/Bindings/interrupt-controller/atmel,aic.txt
@@ -0,0 +1,42 @@
+* Advanced Interrupt Controller (AIC)
+
+Required properties:
+- compatible: Should be "atmel,<chip>-aic"
+ <chip> can be "at91rm9200" or "sama5d3"
+- interrupt-controller: Identifies the node as an interrupt controller.
+- interrupt-parent: For single AIC system, it is an empty property.
+- #interrupt-cells: The number of cells to define the interrupts. It should be 3.
+ The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet).
+ The second cell is used to specify flags:
+ bits[3:0] trigger type and level flags:
+ 1 = low-to-high edge triggered.
+ 2 = high-to-low edge triggered.
+ 4 = active high level-sensitive.
+ 8 = active low level-sensitive.
+ Valid combinations are 1, 2, 3, 4, 8.
+ Default flag for internal sources should be set to 4 (active high).
+ The third cell is used to specify the irq priority from 0 (lowest) to 7
+ (highest).
+- reg: Should contain AIC registers location and length
+- atmel,external-irqs: u32 array of external irqs.
+
+Examples:
+ /*
+ * AIC
+ */
+ aic: interrupt-controller@fffff000 {
+ compatible = "atmel,at91rm9200-aic";
+ interrupt-controller;
+ interrupt-parent;
+ #interrupt-cells = <3>;
+ reg = <0xfffff000 0x200>;
+ };
+
+ /*
+ * An interrupt generating device that is wired to an AIC.
+ */
+ dma: dma-controller@ffffec00 {
+ compatible = "atmel,at91sam9g45-dma";
+ reg = <0xffffec00 0x200>;
+ interrupts = <21 4 5>;
+ };
diff --git a/dts/Bindings/interrupt-controller/opencores,or1k-pic.txt b/dts/Bindings/interrupt-controller/opencores,or1k-pic.txt
new file mode 100644
index 0000000..55c04fa
--- /dev/null
+++ b/dts/Bindings/interrupt-controller/opencores,or1k-pic.txt
@@ -0,0 +1,23 @@
+OpenRISC 1000 Programmable Interrupt Controller
+
+Required properties:
+
+- compatible : should be "opencores,or1k-pic-level" for variants with
+ level triggered interrupt lines, "opencores,or1k-pic-edge" for variants with
+ edge triggered interrupt lines or "opencores,or1200-pic" for machines
+ with the non-spec compliant or1200 type implementation.
+
+ "opencores,or1k-pic" is also provided as an alias to "opencores,or1200-pic",
+ but this is only for backwards compatibility.
+
+- interrupt-controller : Identifies the node as an interrupt controller
+- #interrupt-cells : Specifies the number of cells needed to encode an
+ interrupt source. The value shall be 1.
+
+Example:
+
+intc: interrupt-controller {
+ compatible = "opencores,or1k-pic-level";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+};