diff options
Diffstat (limited to 'dts/Bindings/leds/backlight/pm8941-wled.txt')
| -rw-r--r-- | dts/Bindings/leds/backlight/pm8941-wled.txt | 42 |
1 files changed, 42 insertions, 0 deletions
diff --git a/dts/Bindings/leds/backlight/pm8941-wled.txt b/dts/Bindings/leds/backlight/pm8941-wled.txt new file mode 100644 index 0000000000..e5b294dafc --- /dev/null +++ b/dts/Bindings/leds/backlight/pm8941-wled.txt @@ -0,0 +1,42 @@ +Binding for Qualcomm PM8941 WLED driver + +Required properties: +- compatible: should be "qcom,pm8941-wled" +- reg: slave address + +Optional properties: +- default-brightness: brightness value on boot, value from: 0-4095 + default: 2048 +- label: The name of the backlight device +- qcom,cs-out: bool; enable current sink output +- qcom,cabc: bool; enable content adaptive backlight control +- qcom,ext-gen: bool; use externally generated modulator signal to dim +- qcom,current-limit: mA; per-string current limit; value from 0 to 25 + default: 20mA +- qcom,current-boost-limit: mA; boost current limit; one of: + 105, 385, 525, 805, 980, 1260, 1400, 1680 + default: 805mA +- qcom,switching-freq: kHz; switching frequency; one of: + 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, + 1600, 1920, 2400, 3200, 4800, 9600, + default: 1600kHz +- qcom,ovp: V; Over-voltage protection limit; one of: + 27, 29, 32, 35 + default: 29V +- qcom,num-strings: #; number of led strings attached; value from 1 to 3 + default: 2 + +Example: + +pm8941-wled@d800 { + compatible = "qcom,pm8941-wled"; + reg = <0xd800>; + label = "backlight"; + + qcom,cs-out; + qcom,current-limit = <20>; + qcom,current-boost-limit = <805>; + qcom,switching-freq = <1600>; + qcom,ovp = <29>; + qcom,num-strings = <2>; +}; |