summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/leds/leds-is31fl319x.txt
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/leds/leds-is31fl319x.txt')
-rw-r--r--dts/Bindings/leds/leds-is31fl319x.txt61
1 files changed, 0 insertions, 61 deletions
diff --git a/dts/Bindings/leds/leds-is31fl319x.txt b/dts/Bindings/leds/leds-is31fl319x.txt
deleted file mode 100644
index 676d43ec81..0000000000
--- a/dts/Bindings/leds/leds-is31fl319x.txt
+++ /dev/null
@@ -1,61 +0,0 @@
-LEDs connected to is31fl319x LED controller chip
-
-Required properties:
-- compatible : Should be any of
- "issi,is31fl3190"
- "issi,is31fl3191"
- "issi,is31fl3193"
- "issi,is31fl3196"
- "issi,is31fl3199"
- "si-en,sn3199".
-- #address-cells: Must be 1.
-- #size-cells: Must be 0.
-- reg: 0x64, 0x65, 0x66, or 0x67.
-
-Optional properties:
-- audio-gain-db : audio gain selection for external analog modulation input.
- Valid values: 0 - 21, step by 3 (rounded down)
- Default: 0
-- shutdown-gpios : Specifier of the GPIO connected to SDB pin of the chip.
-
-Each led is represented as a sub-node of the issi,is31fl319x device.
-There can be less leds subnodes than the chip can support but not more.
-
-Required led sub-node properties:
-- reg : number of LED line
- Valid values: 1 - number of leds supported by the chip variant.
-
-Optional led sub-node properties:
-- label : see Documentation/devicetree/bindings/leds/common.txt.
-- linux,default-trigger :
- see Documentation/devicetree/bindings/leds/common.txt.
-- led-max-microamp : (optional)
- Valid values: 5000 - 40000, step by 5000 (rounded down)
- Default: 20000 (20 mA)
- Note: a driver will take the lowest of all led limits since the
- chip has a single global setting. The lowest value will be chosen
- due to the PWM specificity, where lower brightness is achieved
- by reducing the dury-cycle of pulses and not the current, which
- will always have its peak value equal to led-max-microamp.
-
-Examples:
-
-fancy_leds: leds@65 {
- compatible = "issi,is31fl3196";
- #address-cells = <1>;
- #size-cells = <0>;
- reg = <0x65>;
- shutdown-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
-
- red_aux: led@1 {
- label = "red:aux";
- reg = <1>;
- led-max-microamp = <10000>;
- };
-
- green_power: led@5 {
- label = "green:power";
- reg = <5>;
- linux,default-trigger = "default-on";
- };
-};