1 files changed, 0 insertions, 62 deletions
diff --git a/dts/Bindings/mailbox/mtk-gce.txt b/dts/Bindings/mailbox/mtk-gce.txt
deleted file mode 100644
index 0b5b2a6bcc..0000000000
--- a/dts/Bindings/mailbox/mtk-gce.txt
+++ /dev/null
@@ -1,62 +0,0 @@
-MediaTek GCE
-===============
-
-The Global Command Engine (GCE) is used to help read/write registers with
-critical time limitation, such as updating display configuration during the
-vblank. The GCE can be used to implement the Command Queue (CMDQ) driver.
-
-CMDQ driver uses mailbox framework for communication. Please refer to
-mailbox.txt for generic information about mailbox device-tree bindings.
-
-Required properties:
-- compatible: can be "mediatek,mt8173-gce" or "mediatek,mt8183-gce"
-- reg: Address range of the GCE unit
-- interrupts: The interrupt signal from the GCE block
-- clock: Clocks according to the common clock binding
-- clock-names: Must be "gce" to stand for GCE clock
-- #mbox-cells: Should be 2.
-	<&phandle channel priority>
-	phandle: Label name of a gce node.
-	channel: Channel of mailbox. Be equal to the thread id of GCE.
-	priority: Priority of GCE thread.
-
-Required properties for a client device:
-- mboxes: Client use mailbox to communicate with GCE, it should have this
-  property and list of phandle, mailbox specifiers.
-Optional properties for a client device:
-- mediatek,gce-client-reg: Specify the sub-system id which is corresponding
-  to the register address, it should have this property and list of phandle,
-  sub-system specifiers.
-  <&phandle subsys_number start_offset size>
-  phandle: Label name of a gce node.
-  subsys_number: specify the sub-system id which is corresponding
-                 to the register address.
-  start_offset: the start offset of register address that GCE can access.
-  size: the total size of register address that GCE can access.
-
-Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h'
-or 'dt-binding/gce/mt8183-gce.h'. Such as sub-system ids, thread priority, event ids.
-
-Example:
-
-	gce: gce@10212000 {
-		compatible = "mediatek,mt8173-gce";
-		reg = <0 0x10212000 0 0x1000>;
-		interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>;
-		clocks = <&infracfg CLK_INFRA_GCE>;
-		clock-names = "gce";
-		#mbox-cells = <3>;
-	};
-
-Example for a client device:
-
-	mmsys: clock-controller@14000000 {
-		compatible = "mediatek,mt8173-mmsys";
-		mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST>,
-			 <&gce 1 CMDQ_THR_PRIO_LOWEST>;
-		mutex-event-eof = <CMDQ_EVENT_MUTEX0_STREAM_EOF
-				CMDQ_EVENT_MUTEX1_STREAM_EOF>;
-		mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>,
-					  <&gce SUBSYS_1401XXXX 0x2000 0x100>;
-		...
-	};