diff options
Diffstat (limited to 'dts/Bindings/mailbox/mtk-gce.txt')
| -rw-r--r-- | dts/Bindings/mailbox/mtk-gce.txt | 23 |
1 files changed, 15 insertions, 8 deletions
diff --git a/dts/Bindings/mailbox/mtk-gce.txt b/dts/Bindings/mailbox/mtk-gce.txt index 7d72b21c9e..7b13787ab1 100644 --- a/dts/Bindings/mailbox/mtk-gce.txt +++ b/dts/Bindings/mailbox/mtk-gce.txt @@ -9,7 +9,7 @@ CMDQ driver uses mailbox framework for communication. Please refer to mailbox.txt for generic information about mailbox device-tree bindings. Required properties: -- compatible: Must be "mediatek,mt8173-gce" +- compatible: can be "mediatek,mt8173-gce" or "mediatek,mt8183-gce" - reg: Address range of the GCE unit - interrupts: The interrupt signal from the GCE block - clock: Clocks according to the common clock binding @@ -25,11 +25,19 @@ Required properties: Required properties for a client device: - mboxes: Client use mailbox to communicate with GCE, it should have this property and list of phandle, mailbox specifiers. -- mediatek,gce-subsys: u32, specify the sub-system id which is corresponding - to the register address. +Optional properties for a client device: +- mediatek,gce-client-reg: Specify the sub-system id which is corresponding + to the register address, it should have this property and list of phandle, + sub-system specifiers. + <&phandle subsys_number start_offset size> + phandle: Label name of a gce node. + subsys_number: specify the sub-system id which is corresponding + to the register address. + start_offset: the start offset of register address that GCE can access. + size: the total size of register address that GCE can access. -Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h'. Such as -sub-system ids, thread priority, event ids. +Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h' +or 'dt-binding/gce/mt8183-gce.h'. Such as sub-system ids, thread priority, event ids. Example: @@ -39,7 +47,6 @@ Example: interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>; clocks = <&infracfg CLK_INFRA_GCE>; clock-names = "gce"; - thread-num = CMDQ_THR_MAX_COUNT; #mbox-cells = <3>; }; @@ -49,9 +56,9 @@ Example for a client device: compatible = "mediatek,mt8173-mmsys"; mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>, <&gce 1 CMDQ_THR_PRIO_LOWEST 1>; - mediatek,gce-subsys = <SUBSYS_1400XXXX>; mutex-event-eof = <CMDQ_EVENT_MUTEX0_STREAM_EOF CMDQ_EVENT_MUTEX1_STREAM_EOF>; - + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>, + <&gce SUBSYS_1401XXXX 0x2000 0x100>; ... }; |