1 files changed, 63 insertions, 0 deletions
diff --git a/dts/Bindings/media/i2c/nokia,smia.txt b/dts/Bindings/media/i2c/nokia,smia.txt
new file mode 100644
index 0000000000..855e1faf73
--- /dev/null
+++ b/dts/Bindings/media/i2c/nokia,smia.txt
@@ -0,0 +1,63 @@
+SMIA/SMIA++ sensor
+
+SMIA (Standard Mobile Imaging Architecture) is an image sensor standard
+defined jointly by Nokia and ST. SMIA++, defined by Nokia, is an extension
+of that. These definitions are valid for both types of sensors.
+
+More detailed documentation can be found in
+Documentation/devicetree/bindings/media/video-interfaces.txt .
+
+
+Mandatory properties
+--------------------
+
+- compatible: "nokia,smia"
+- reg: I2C address (0x10, or an alternative address)
+- vana-supply: Analogue voltage supply (VANA), typically 2,8 volts (sensor
+  dependent).
+- clocks: External clock to the sensor
+- clock-frequency: Frequency of the external clock to the sensor
+- link-frequencies: List of allowed data link frequencies. An array of
+  64-bit elements.
+
+
+Optional properties
+-------------------
+
+- nokia,nvm-size: The size of the NVM, in bytes. If the size is not given,
+  the NVM contents will not be read.
+- reset-gpios: XSHUTDOWN GPIO
+
+
+Endpoint node mandatory properties
+----------------------------------
+
+- clock-lanes: <0>
+- data-lanes: <1..n>
+- remote-endpoint: A phandle to the bus receiver's endpoint node.
+
+
+Example
+-------
+
+&i2c2 {
+	clock-frequency = <400000>;
+
+	smiapp_1: camera@10 {
+		compatible = "nokia,smia";
+		reg = <0x10>;
+		reset-gpios = <&gpio3 20 0>;
+		vana-supply = <&vaux3>;
+		clocks = <&omap3_isp 0>;
+		clock-frequency = <9600000>;
+		nokia,nvm-size = <512>; /* 8 * 64 */
+		link-frequencies = /bits/ 64 <199200000 210000000 499200000>;
+		port {
+			smiapp_1_1: endpoint {
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&csi2a_ep>;
+			};
+		};
+	};
+};