1 files changed, 0 insertions, 52 deletions
diff --git a/dts/Bindings/media/i2c/ov7251.txt b/dts/Bindings/media/i2c/ov7251.txt
deleted file mode 100644
index 8281151f74..0000000000
--- a/dts/Bindings/media/i2c/ov7251.txt
+++ /dev/null
@@ -1,52 +0,0 @@
-* Omnivision 1/7.5-Inch B&W VGA CMOS Digital Image Sensor
-
-The Omnivision OV7251 is a 1/7.5-Inch CMOS active pixel digital image sensor
-with an active array size of 640H x 480V. It is programmable through a serial
-I2C interface.
-
-Required Properties:
-- compatible: Value should be "ovti,ov7251".
-- clocks: Reference to the xclk clock.
-- clock-names: Should be "xclk".
-- clock-frequency: Frequency of the xclk clock.
-- enable-gpios: Chip enable GPIO. Polarity is GPIO_ACTIVE_HIGH. This corresponds
-  to the hardware pin XSHUTDOWN which is physically active low.
-- vdddo-supply: Chip digital IO regulator.
-- vdda-supply: Chip analog regulator.
-- vddd-supply: Chip digital core regulator.
-
-The device node shall contain one 'port' child node with a single 'endpoint'
-subnode for its digital output video port, in accordance with the video
-interface bindings defined in
-Documentation/devicetree/bindings/media/video-interfaces.txt.
-
-Example:
-
-	&i2c1 {
-		...
-
-		ov7251: camera-sensor@60 {
-			compatible = "ovti,ov7251";
-			reg = <0x60>;
-
-			enable-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-			pinctrl-names = "default";
-			pinctrl-0 = <&camera_bw_default>;
-
-			clocks = <&clks 200>;
-			clock-names = "xclk";
-			clock-frequency = <24000000>;
-
-			vdddo-supply = <&camera_dovdd_1v8>;
-			vdda-supply = <&camera_avdd_2v8>;
-			vddd-supply = <&camera_dvdd_1v2>;
-
-			port {
-				ov7251_ep: endpoint {
-					clock-lanes = <1>;
-					data-lanes = <0>;
-					remote-endpoint = <&csi0_ep>;
-				};
-			};
-		};
-	};