diff options
Diffstat (limited to 'dts/Bindings/media/renesas,drif.yaml')
| -rw-r--r-- | dts/Bindings/media/renesas,drif.yaml | 279 |
1 files changed, 279 insertions, 0 deletions
diff --git a/dts/Bindings/media/renesas,drif.yaml b/dts/Bindings/media/renesas,drif.yaml new file mode 100644 index 0000000000..f1bdaeab40 --- /dev/null +++ b/dts/Bindings/media/renesas,drif.yaml @@ -0,0 +1,279 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/renesas,drif.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Renesas R-Car Gen3 Digital Radio Interface Controller (DRIF) + +maintainers: + - Ramesh Shanmugasundaram <rashanmu@gmail.com> + - Fabrizio Castro <fabrizio.castro.jz@renesas.com> + +description: | + R-Car Gen3 DRIF is a SPI like receive only slave device. A general + representation of DRIF interfacing with a master device is shown below. + + +---------------------+ +---------------------+ + | |-----SCK------->|CLK | + | Master |-----SS-------->|SYNC DRIFn (slave) | + | |-----SD0------->|D0 | + | |-----SD1------->|D1 | + +---------------------+ +---------------------+ + + As per datasheet, each DRIF channel (drifn) is made up of two internal + channels (drifn0 & drifn1). These two internal channels share the common + CLK & SYNC. Each internal channel has its own dedicated resources like + irq, dma channels, address space & clock. This internal split is not + visible to the external master device. + + The device tree model represents each internal channel as a separate node. + The internal channels sharing the CLK & SYNC are tied together by their + phandles using a property called "renesas,bonding". For the rest of + the documentation, unless explicitly stated, the word channel implies an + internal channel. + + When both internal channels are enabled they need to be managed together + as one (i.e.) they cannot operate alone as independent devices. Out of the + two, one of them needs to act as a primary device that accepts common + properties of both the internal channels. This channel is identified by a + property called "renesas,primary-bond". + + To summarize, + * When both the internal channels that are bonded together are enabled, + the zeroth channel is selected as primary-bond. This channels accepts + properties common to all the members of the bond. + * When only one of the bonded channels need to be enabled, the property + "renesas,bonding" or "renesas,primary-bond" will have no effect. That + enabled channel can act alone as any other independent device. + +properties: + compatible: + items: + - enum: + - renesas,r8a7795-drif # R-Car H3 + - renesas,r8a7796-drif # R-Car M3-W + - renesas,r8a77965-drif # R-Car M3-N + - renesas,r8a77990-drif # R-Car E3 + - const: renesas,rcar-gen3-drif # Generic R-Car Gen3 compatible device + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + maxItems: 1 + items: + - const: fck + + resets: + maxItems: 1 + + dmas: + minItems: 1 + maxItems: 2 + + dma-names: + minItems: 1 + maxItems: 2 + items: + - const: rx + - const: rx + + renesas,bonding: + $ref: /schemas/types.yaml#/definitions/phandle + description: + The phandle to the other internal channel of DRIF + + power-domains: + maxItems: 1 + + renesas,primary-bond: + type: boolean + description: + Indicates that the channel acts as primary among the bonded channels. + + port: + type: object + description: + Child port node corresponding to the data input, in accordance with the + video interface bindings defined in + Documentation/devicetree/bindings/media/video-interfaces.txt. + The port node must contain at least one endpoint. + + properties: + endpoint: + type: object + + properties: + remote-endpoint: + description: + A phandle to the remote tuner endpoint subnode in remote node + port. + + sync-active: + enum: [0, 1] + description: + Indicates sync signal polarity, 0/1 for low/high respectively. + This property maps to SYNCAC bit in the hardware manual. The + default is 1 (active high). + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - resets + - dmas + - dma-names + - renesas,bonding + - power-domains + +allOf: + - if: + required: + - renesas,primary-bond + then: + required: + - pinctrl-0 + - pinctrl-names + - port + + - if: + required: + - port + then: + required: + - pinctrl-0 + - pinctrl-names + else: + properties: + pinctrl-0: false + pinctrl-names: false + +additionalProperties: false + +examples: + # Example with both internal channels enabled. + # + # When interfacing with a third party tuner device with two data pins as shown + # below. + # + # +---------------------+ +---------------------+ + # | |-----SCK------->|CLK | + # | Master |-----SS-------->|SYNC DRIFn (slave) | + # | |-----SD0------->|D0 | + # | |-----SD1------->|D1 | + # +---------------------+ +---------------------+ + - | + #include <dt-bindings/clock/r8a7795-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + drif00: rif@e6f40000 { + compatible = "renesas,r8a7795-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f40000 0 0x64>; + interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 515>; + clock-names = "fck"; + dmas = <&dmac1 0x20>, <&dmac2 0x20>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + renesas,bonding = <&drif01>; + resets = <&cpg 515>; + renesas,primary-bond; + pinctrl-0 = <&drif0_pins>; + pinctrl-names = "default"; + port { + drif0_ep: endpoint { + remote-endpoint = <&tuner_ep>; + }; + }; + }; + + drif01: rif@e6f50000 { + compatible = "renesas,r8a7795-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f50000 0 0x64>; + interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 514>; + clock-names = "fck"; + dmas = <&dmac1 0x22>, <&dmac2 0x22>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + renesas,bonding = <&drif00>; + resets = <&cpg 514>; + }; + }; + + # Example with internal channel 1 alone enabled. + # + # When interfacing with a third party tuner device with one data pin as shown + # below. + # + # +---------------------+ +---------------------+ + # | |-----SCK------->|CLK | + # | Master |-----SS-------->|SYNC DRIFn (slave) | + # | | |D0 (unused) | + # | |-----SD-------->|D1 | + # +---------------------+ +---------------------+ + - | + #include <dt-bindings/clock/r8a7795-cpg-mssr.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/power/r8a7795-sysc.h> + + soc { + #address-cells = <2>; + #size-cells = <2>; + + drif10: rif@e6f60000 { + compatible = "renesas,r8a7795-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f60000 0 0x64>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 513>; + clock-names = "fck"; + dmas = <&dmac1 0x24>, <&dmac2 0x24>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 513>; + renesas,bonding = <&drif11>; + status = "disabled"; + }; + + drif11: rif@e6f70000 { + compatible = "renesas,r8a7795-drif", + "renesas,rcar-gen3-drif"; + reg = <0 0xe6f70000 0 0x64>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 512>; + clock-names = "fck"; + dmas = <&dmac1 0x26>, <&dmac2 0x26>; + dma-names = "rx", "rx"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 512>; + renesas,bonding = <&drif10>; + pinctrl-0 = <&drif1_pins>; + pinctrl-names = "default"; + port { + drif1_ep: endpoint { + remote-endpoint = <&tuner_ep1>; + sync-active = <0>; + }; + }; + }; + }; +... |