1 files changed, 0 insertions, 60 deletions
diff --git a/dts/Bindings/media/video-mux.txt b/dts/Bindings/media/video-mux.txt
deleted file mode 100644
index 63b9dc913e..0000000000
--- a/dts/Bindings/media/video-mux.txt
+++ /dev/null
@@ -1,60 +0,0 @@
-Video Multiplexer
-=================
-
-Video multiplexers allow to select between multiple input ports. Video received
-on the active input port is passed through to the output port. Muxes described
-by this binding are controlled by a multiplexer controller that is described by
-the bindings in Documentation/devicetree/bindings/mux/mux-controller.txt
-
-Required properties:
-- compatible : should be "video-mux"
-- mux-controls : mux controller node to use for operating the mux
-- #address-cells: should be <1>
-- #size-cells: should be <0>
-- port@*: at least three port nodes containing endpoints connecting to the
-  source and sink devices according to of_graph bindings. The last port is
-  the output port, all others are inputs.
-
-Optionally, #address-cells, #size-cells, and port nodes can be grouped under a
-ports node as described in Documentation/devicetree/bindings/graph.txt.
-
-Example:
-
-	mux: mux-controller {
-		compatible = "gpio-mux";
-		#mux-control-cells = <0>;
-
-		mux-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>;
-	};
-
-	video-mux {
-		compatible = "video-mux";
-		mux-controls = <&mux>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
-			mux_in0: endpoint {
-				remote-endpoint = <&video_source0_out>;
-			};
-		};
-
-		port@1 {
-			reg = <1>;
-
-			mux_in1: endpoint {
-				remote-endpoint = <&video_source1_out>;
-			};
-		};
-
-		port@2 {
-			reg = <2>;
-
-			mux_out: endpoint {
-				remote-endpoint = <&capture_interface_in>;
-			};
-		};
-	};
-};