diff options
Diffstat (limited to 'dts/Bindings/media')
| -rw-r--r-- | dts/Bindings/media/aspeed-video.txt | 26 | ||||
| -rw-r--r-- | dts/Bindings/media/cedrus.txt | 4 | ||||
| -rw-r--r-- | dts/Bindings/media/i2c/mt9m111.txt | 13 | ||||
| -rw-r--r-- | dts/Bindings/media/i2c/sony,imx214.txt | 53 | ||||
| -rw-r--r-- | dts/Bindings/media/qcom,venus.txt | 14 | ||||
| -rw-r--r-- | dts/Bindings/media/rcar_vin.txt | 2 | ||||
| -rw-r--r-- | dts/Bindings/media/renesas,rcar-csi2.txt | 2 | ||||
| -rw-r--r-- | dts/Bindings/media/rockchip-vpu.txt | 29 | ||||
| -rw-r--r-- | dts/Bindings/media/spi/sony-cxd2880.txt | 4 | ||||
| -rw-r--r-- | dts/Bindings/media/sun6i-csi.txt | 59 |
10 files changed, 200 insertions, 6 deletions
diff --git a/dts/Bindings/media/aspeed-video.txt b/dts/Bindings/media/aspeed-video.txt new file mode 100644 index 0000000000..78b464ae26 --- /dev/null +++ b/dts/Bindings/media/aspeed-video.txt @@ -0,0 +1,26 @@ +* Device tree bindings for Aspeed Video Engine + +The Video Engine (VE) embedded in the Aspeed AST2400 and AST2500 SOCs can +capture and compress video data from digital or analog sources. + +Required properties: + - compatible: "aspeed,ast2400-video-engine" or + "aspeed,ast2500-video-engine" + - reg: contains the offset and length of the VE memory region + - clocks: clock specifiers for the syscon clocks associated with + the VE (ordering must match the clock-names property) + - clock-names: "vclk" and "eclk" + - resets: reset specifier for the syscon reset associated with + the VE + - interrupts: the interrupt associated with the VE on this platform + +Example: + +video-engine@1e700000 { + compatible = "aspeed,ast2500-video-engine"; + reg = <0x1e700000 0x20000>; + clocks = <&syscon ASPEED_CLK_GATE_VCLK>, <&syscon ASPEED_CLK_GATE_ECLK>; + clock-names = "vclk", "eclk"; + resets = <&syscon ASPEED_RESET_VIDEO>; + interrupts = <7>; +}; diff --git a/dts/Bindings/media/cedrus.txt b/dts/Bindings/media/cedrus.txt index a089a0c1ff..bce0705df9 100644 --- a/dts/Bindings/media/cedrus.txt +++ b/dts/Bindings/media/cedrus.txt @@ -11,6 +11,8 @@ Required properties: - "allwinner,sun7i-a20-video-engine" - "allwinner,sun8i-a33-video-engine" - "allwinner,sun8i-h3-video-engine" + - "allwinner,sun50i-a64-video-engine" + - "allwinner,sun50i-h5-video-engine" - reg : register base and length of VE; - clocks : list of clock specifiers, corresponding to entries in the clock-names property; @@ -31,7 +33,7 @@ reserved-memory { ranges; /* Address must be kept in the lower 256 MiBs of DRAM for VE. */ - cma_pool: cma@4a000000 { + cma_pool: default-pool { compatible = "shared-dma-pool"; size = <0x6000000>; alloc-ranges = <0x4a000000 0x6000000>; diff --git a/dts/Bindings/media/i2c/mt9m111.txt b/dts/Bindings/media/i2c/mt9m111.txt index 6b910036b5..d0bed6fa90 100644 --- a/dts/Bindings/media/i2c/mt9m111.txt +++ b/dts/Bindings/media/i2c/mt9m111.txt @@ -9,8 +9,14 @@ Required Properties: - clocks: reference to the master clock. - clock-names: shall be "mclk". -For further reading on port node refer to -Documentation/devicetree/bindings/media/video-interfaces.txt. +The device node must contain one 'port' child node with one 'endpoint' child +sub-node for its digital output video port, in accordance with the video +interface bindings defined in: +Documentation/devicetree/bindings/media/video-interfaces.txt + +Optional endpoint properties: +- pclk-sample: For information see ../video-interfaces.txt. The value is set to + 0 if it isn't specified. Example: @@ -21,11 +27,10 @@ Example: clocks = <&mclk>; clock-names = "mclk"; - remote = <&pxa_camera>; port { mt9m111_1: endpoint { - bus-width = <8>; remote-endpoint = <&pxa_camera>; + pclk-sample = <1>; }; }; }; diff --git a/dts/Bindings/media/i2c/sony,imx214.txt b/dts/Bindings/media/i2c/sony,imx214.txt new file mode 100644 index 0000000000..f11f28a5fd --- /dev/null +++ b/dts/Bindings/media/i2c/sony,imx214.txt @@ -0,0 +1,53 @@ +* Sony 1/3.06-Inch 13.13Mp CMOS Digital Image Sensor + +The Sony imx214 is a 1/3.06-inch CMOS active pixel digital image sensor with +an active array size of 4224H x 3200V. It is programmable through an I2C +interface. +Image data is sent through MIPI CSI-2, through 2 or 4 lanes at a maximum +throughput of 1.2Gbps/lane. + + +Required Properties: +- compatible: Shall be "sony,imx214". +- reg: I2C bus address of the device. Depending on how the sensor is wired, + it shall be <0x10> or <0x1a>; +- enable-gpios: GPIO descriptor for the enable pin. +- vdddo-supply: Chip digital IO regulator (1.8V). +- vdda-supply: Chip analog regulator (2.7V). +- vddd-supply: Chip digital core regulator (1.12V). +- clocks: Reference to the xclk clock. +- clock-frequency: Frequency of the xclk clock. + +Optional Properties: +- flash-leds: See ../video-interfaces.txt +- lens-focus: See ../video-interfaces.txt + +The imx214 device node shall contain one 'port' child node with +an 'endpoint' subnode. For further reading on port node refer to +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Required Properties on endpoint: +- data-lanes: check ../video-interfaces.txt +- link-frequencies: check ../video-interfaces.txt +- remote-endpoint: check ../video-interfaces.txt + +Example: + + camera-sensor@1a { + compatible = "sony,imx214"; + reg = <0x1a>; + vdddo-supply = <&pm8994_lvs1>; + vddd-supply = <&camera_vddd_1v12>; + vdda-supply = <&pm8994_l17>; + lens-focus = <&ad5820>; + enable-gpios = <&msmgpio 25 GPIO_ACTIVE_HIGH>; + clocks = <&mmcc CAMSS_MCLK0_CLK>; + clock-frequency = <24000000>; + port { + imx214_ep: endpoint { + data-lanes = <1 2 3 4>; + link-frequencies = /bits/ 64 <480000000>; + remote-endpoint = <&csiphy0_ep>; + }; + }; + }; diff --git a/dts/Bindings/media/qcom,venus.txt b/dts/Bindings/media/qcom,venus.txt index 00d0d1bf76..b602c4c025 100644 --- a/dts/Bindings/media/qcom,venus.txt +++ b/dts/Bindings/media/qcom,venus.txt @@ -53,7 +53,8 @@ * Subnodes The Venus video-codec node must contain two subnodes representing -video-decoder and video-encoder. +video-decoder and video-encoder, and one optional firmware subnode. +Firmware subnode is needed when the platform does not have TrustZone. Every of video-encoder or video-decoder subnode should have: @@ -79,6 +80,13 @@ Every of video-encoder or video-decoder subnode should have: power domain which is responsible for collapsing and restoring power to the subcore. +The firmware subnode must have: + +- iommus: + Usage: required + Value type: <prop-encoded-array> + Definition: A list of phandle and IOMMU specifier pairs. + * An Example video-codec@1d00000 { compatible = "qcom,msm8916-venus"; @@ -105,4 +113,8 @@ Every of video-encoder or video-decoder subnode should have: clock-names = "core"; power-domains = <&mmcc VENUS_CORE1_GDSC>; }; + + video-firmware { + iommus = <&apps_iommu 0x10b2 0x0>; + }; }; diff --git a/dts/Bindings/media/rcar_vin.txt b/dts/Bindings/media/rcar_vin.txt index d329a4e8ac..0dd84a183c 100644 --- a/dts/Bindings/media/rcar_vin.txt +++ b/dts/Bindings/media/rcar_vin.txt @@ -24,6 +24,8 @@ on Gen3 platforms to a CSI-2 receiver. - "renesas,vin-r8a7796" for the R8A7796 device - "renesas,vin-r8a77965" for the R8A77965 device - "renesas,vin-r8a77970" for the R8A77970 device + - "renesas,vin-r8a77980" for the R8A77980 device + - "renesas,vin-r8a77990" for the R8A77990 device - "renesas,vin-r8a77995" for the R8A77995 device - "renesas,rcar-gen2-vin" for a generic R-Car Gen2 or RZ/G1 compatible device. diff --git a/dts/Bindings/media/renesas,rcar-csi2.txt b/dts/Bindings/media/renesas,rcar-csi2.txt index 2d385b65b2..541d936b62 100644 --- a/dts/Bindings/media/renesas,rcar-csi2.txt +++ b/dts/Bindings/media/renesas,rcar-csi2.txt @@ -12,6 +12,8 @@ Mandatory properties - "renesas,r8a7796-csi2" for the R8A7796 device. - "renesas,r8a77965-csi2" for the R8A77965 device. - "renesas,r8a77970-csi2" for the R8A77970 device. + - "renesas,r8a77980-csi2" for the R8A77980 device. + - "renesas,r8a77990-csi2" for the R8A77990 device. - reg: the register base and size for the device registers - interrupts: the interrupt for the device diff --git a/dts/Bindings/media/rockchip-vpu.txt b/dts/Bindings/media/rockchip-vpu.txt new file mode 100644 index 0000000000..35dc464ad7 --- /dev/null +++ b/dts/Bindings/media/rockchip-vpu.txt @@ -0,0 +1,29 @@ +device-tree bindings for rockchip VPU codec + +Rockchip (Video Processing Unit) present in various Rockchip platforms, +such as RK3288 and RK3399. + +Required properties: +- compatible: value should be one of the following + "rockchip,rk3288-vpu"; + "rockchip,rk3399-vpu"; +- interrupts: encoding and decoding interrupt specifiers +- interrupt-names: should be "vepu" and "vdpu" +- clocks: phandle to VPU aclk, hclk clocks +- clock-names: should be "aclk" and "hclk" +- power-domains: phandle to power domain node +- iommus: phandle to a iommu node + +Example: +SoC-specific DT entry: + vpu: video-codec@ff9a0000 { + compatible = "rockchip,rk3288-vpu"; + reg = <0x0 0xff9a0000 0x0 0x800>; + interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "vepu", "vdpu"; + clocks = <&cru ACLK_VCODEC>, <&cru HCLK_VCODEC>; + clock-names = "aclk", "hclk"; + power-domains = <&power RK3288_PD_VIDEO>; + iommus = <&vpu_mmu>; + }; diff --git a/dts/Bindings/media/spi/sony-cxd2880.txt b/dts/Bindings/media/spi/sony-cxd2880.txt index fc5aa263ab..98a72c0b3c 100644 --- a/dts/Bindings/media/spi/sony-cxd2880.txt +++ b/dts/Bindings/media/spi/sony-cxd2880.txt @@ -5,6 +5,10 @@ Required properties: - reg: SPI chip select number for the device. - spi-max-frequency: Maximum bus speed, should be set to <55000000> (55MHz). +Optional properties: +- vcc-supply: Optional phandle to the vcc regulator to power the adapter, + as described in the file ../regulator/regulator.txt + Example: cxd2880@0 { diff --git a/dts/Bindings/media/sun6i-csi.txt b/dts/Bindings/media/sun6i-csi.txt new file mode 100644 index 0000000000..d4ab34f224 --- /dev/null +++ b/dts/Bindings/media/sun6i-csi.txt @@ -0,0 +1,59 @@ +Allwinner V3s Camera Sensor Interface +------------------------------------- + +Allwinner V3s SoC features a CSI module(CSI1) with parallel interface. + +Required properties: + - compatible: value must be one of: + * "allwinner,sun6i-a31-csi" + * "allwinner,sun8i-h3-csi", "allwinner,sun6i-a31-csi" + * "allwinner,sun8i-v3s-csi" + - reg: base address and size of the memory-mapped region. + - interrupts: interrupt associated to this IP + - clocks: phandles to the clocks feeding the CSI + * bus: the CSI interface clock + * mod: the CSI module clock + * ram: the CSI DRAM clock + - clock-names: the clock names mentioned above + - resets: phandles to the reset line driving the CSI + +The CSI node should contain one 'port' child node with one child 'endpoint' +node, according to the bindings defined in +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Endpoint node properties for CSI +--------------------------------- +See the video-interfaces.txt for a detailed description of these properties. +- remote-endpoint : (required) a phandle to the bus receiver's endpoint + node +- bus-width: : (required) must be 8, 10, 12 or 16 +- pclk-sample : (optional) (default: sample on falling edge) +- hsync-active : (required; parallel-only) +- vsync-active : (required; parallel-only) + +Example: + +csi1: csi@1cb4000 { + compatible = "allwinner,sun8i-v3s-csi"; + reg = <0x01cb4000 0x1000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI1_SCLK>, + <&ccu CLK_DRAM_CSI>; + clock-names = "bus", "mod", "ram"; + resets = <&ccu RST_BUS_CSI>; + + port { + /* Parallel bus endpoint */ + csi1_ep: endpoint { + remote-endpoint = <&adv7611_ep>; + bus-width = <16>; + + /* If hsync-active/vsync-active are missing, + embedded BT.656 sync is used */ + hsync-active = <0>; /* Active low */ + vsync-active = <0>; /* Active low */ + pclk-sample = <1>; /* Rising */ + }; + }; +}; |