2 files changed, 69 insertions, 0 deletions
diff --git a/dts/Bindings/media/i2c/adp1653.txt b/dts/Bindings/media/i2c/adp1653.txt
new file mode 100644
index 0000000000..5ce66f2104
--- /dev/null
+++ b/dts/Bindings/media/i2c/adp1653.txt
@@ -0,0 +1,37 @@
+* Analog Devices ADP1653 flash LED driver
+
+Required Properties:
+
+  - compatible: Must contain "adi,adp1653"
+
+  - reg: I2C slave address
+
+  - enable-gpios: Specifier of the GPIO connected to EN pin
+
+There are two LED outputs available - flash and indicator. One LED is
+represented by one child node, nodes need to be named "flash" and "indicator".
+
+Required properties of the LED child node:
+- max-microamp : see Documentation/devicetree/bindings/leds/common.txt
+
+Required properties of the flash LED child node:
+
+- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
+- flash-timeout-us : see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+	adp1653: led-controller@30 {
+		compatible = "adi,adp1653";
+		reg = <0x30>;
+		enable-gpios = <&gpio3 24 GPIO_ACTIVE_HIGH>; /* 88 */
+
+		flash {
+			flash-timeout-us = <500000>;
+			flash-max-microamp = <320000>;
+			max-microamp = <50000>;
+		};
+		indicator {
+			max-microamp = <17500>;
+		};
+	};
diff --git a/dts/Bindings/media/st,stih4xx.txt b/dts/Bindings/media/st,stih4xx.txt
new file mode 100644
index 0000000000..df655cd3a4
--- /dev/null
+++ b/dts/Bindings/media/st,stih4xx.txt
@@ -0,0 +1,32 @@
+STMicroelectronics stih4xx platforms
+
+bdisp: 2D blitter for STMicroelectronics SoC.
+
+Required properties:
+- compatible: should be "st,stih407-bdisp".
+- reg: BDISP physical address location and length.
+- interrupts: BDISP interrupt number.
+- clocks: from common clock binding: handle hardware IP needed clocks, the
+  number of clocks may depend on the SoC type.
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: names of the clocks listed in clocks property in the same order.
+
+Example:
+
+	bdisp0:bdisp@9f10000 {
+		compatible = "st,stih407-bdisp";
+		reg = <0x9f10000 0x1000>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_NONE>;
+		clock-names = "bdisp";
+		clocks = <&clk_s_c0_flexgen CLK_IC_BDISP_0>;
+	};
+
+Aliases:
+Each BDISP should have a numbered alias in the aliases node, in the form of
+bdispN, N = 0 or 1.
+
+Example:
+
+	aliases {
+		bdisp0 = &bdisp0;
+	};