diff options
Diffstat (limited to 'dts/Bindings/media')
| -rw-r--r-- | dts/Bindings/media/fsl-vdoa.txt | 21 | ||||
| -rw-r--r-- | dts/Bindings/media/gpio-ir-receiver.txt | 3 | ||||
| -rw-r--r-- | dts/Bindings/media/hix5hd2-ir.txt | 2 | ||||
| -rw-r--r-- | dts/Bindings/media/i2c/toshiba,et8ek8.txt | 48 | ||||
| -rw-r--r-- | dts/Bindings/media/meson-ir.txt | 3 | ||||
| -rw-r--r-- | dts/Bindings/media/mtk-cir.txt | 24 | ||||
| -rw-r--r-- | dts/Bindings/media/rc.txt | 117 | ||||
| -rw-r--r-- | dts/Bindings/media/st,st-delta.txt | 17 | ||||
| -rw-r--r-- | dts/Bindings/media/sunxi-ir.txt | 2 | ||||
| -rw-r--r-- | dts/Bindings/media/ti,da850-vpif.txt | 83 |
10 files changed, 317 insertions, 3 deletions
diff --git a/dts/Bindings/media/fsl-vdoa.txt b/dts/Bindings/media/fsl-vdoa.txt new file mode 100644 index 0000000000..6c5628530b --- /dev/null +++ b/dts/Bindings/media/fsl-vdoa.txt @@ -0,0 +1,21 @@ +Freescale Video Data Order Adapter +================================== + +The Video Data Order Adapter (VDOA) is present on the i.MX6q. Its sole purpose +is to reorder video data from the macroblock tiled order produced by the CODA +960 VPU to the conventional raster-scan order for scanout. + +Required properties: +- compatible: must be "fsl,imx6q-vdoa" +- reg: the register base and size for the device registers +- interrupts: the VDOA interrupt +- clocks: the vdoa clock + +Example: + +vdoa@21e4000 { + compatible = "fsl,imx6q-vdoa"; + reg = <0x021e4000 0x4000>; + interrupts = <0 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks IMX6QDL_CLK_VDOA>; +}; diff --git a/dts/Bindings/media/gpio-ir-receiver.txt b/dts/Bindings/media/gpio-ir-receiver.txt index 56e726ef4b..58261fb7b4 100644 --- a/dts/Bindings/media/gpio-ir-receiver.txt +++ b/dts/Bindings/media/gpio-ir-receiver.txt @@ -5,7 +5,8 @@ Required properties: - gpios: specifies GPIO used for IR signal reception. Optional properties: - - linux,rc-map-name: Linux specific remote control map name. + - linux,rc-map-name: see rc.txt file in the same + directory. Example node: diff --git a/dts/Bindings/media/hix5hd2-ir.txt b/dts/Bindings/media/hix5hd2-ir.txt index 54e1bede62..13ebc0fac9 100644 --- a/dts/Bindings/media/hix5hd2-ir.txt +++ b/dts/Bindings/media/hix5hd2-ir.txt @@ -10,7 +10,7 @@ Required properties: - clocks: clock phandle and specifier pair. Optional properties: - - linux,rc-map-name : Remote control map name. + - linux,rc-map-name: see rc.txt file in the same directory. - hisilicon,power-syscon: DEPRECATED. Don't use this in new dts files. Provide correct clocks instead. diff --git a/dts/Bindings/media/i2c/toshiba,et8ek8.txt b/dts/Bindings/media/i2c/toshiba,et8ek8.txt new file mode 100644 index 0000000000..0b7b6a4d84 --- /dev/null +++ b/dts/Bindings/media/i2c/toshiba,et8ek8.txt @@ -0,0 +1,48 @@ +Toshiba et8ek8 5MP sensor + +Toshiba et8ek8 5MP sensor is an image sensor found in Nokia N900 device + +More detailed documentation can be found in +Documentation/devicetree/bindings/media/video-interfaces.txt . + + +Mandatory properties +-------------------- + +- compatible: "toshiba,et8ek8" +- reg: I2C address (0x3e, or an alternative address) +- vana-supply: Analogue voltage supply (VANA), 2.8 volts +- clocks: External clock to the sensor +- clock-frequency: Frequency of the external clock to the sensor. Camera + driver will set this frequency on the external clock. The clock frequency is + a pre-determined frequency known to be suitable to the board. +- reset-gpios: XSHUTDOWN GPIO. The XSHUTDOWN signal is active low. The sensor + is in hardware standby mode when the signal is in the low state. + + +Endpoint node mandatory properties +---------------------------------- + +- remote-endpoint: A phandle to the bus receiver's endpoint node. + + +Example +------- + +&i2c3 { + clock-frequency = <400000>; + + cam1: camera@3e { + compatible = "toshiba,et8ek8"; + reg = <0x3e>; + vana-supply = <&vaux4>; + clocks = <&isp 0>; + clock-frequency = <9600000>; + reset-gpio = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* 102 */ + port { + csi_cam1: endpoint { + remote-endpoint = <&csi_out1>; + }; + }; + }; +}; diff --git a/dts/Bindings/media/meson-ir.txt b/dts/Bindings/media/meson-ir.txt index e7e3f3c4fc..efd9d29a8f 100644 --- a/dts/Bindings/media/meson-ir.txt +++ b/dts/Bindings/media/meson-ir.txt @@ -8,6 +8,9 @@ Required properties: - reg : physical base address and length of the device registers - interrupts : a single specifier for the interrupt from the device +Optional properties: + - linux,rc-map-name: see rc.txt file in the same directory. + Example: ir-receiver@c8100480 { diff --git a/dts/Bindings/media/mtk-cir.txt b/dts/Bindings/media/mtk-cir.txt new file mode 100644 index 0000000000..2be2005577 --- /dev/null +++ b/dts/Bindings/media/mtk-cir.txt @@ -0,0 +1,24 @@ +Device-Tree bindings for Mediatek consumer IR controller +found in Mediatek SoC family + +Required properties: +- compatible : "mediatek,mt7623-cir" +- clocks : list of clock specifiers, corresponding to + entries in clock-names property; +- clock-names : should contain "clk" entries; +- interrupts : should contain IR IRQ number; +- reg : should contain IO map address for IR. + +Optional properties: +- linux,rc-map-name : see rc.txt file in the same directory. + +Example: + +cir: cir@10013000 { + compatible = "mediatek,mt7623-cir"; + reg = <0 0x10013000 0 0x1000>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_IRRX>; + clock-names = "clk"; + linux,rc-map-name = "rc-rc6-mce"; +}; diff --git a/dts/Bindings/media/rc.txt b/dts/Bindings/media/rc.txt new file mode 100644 index 0000000000..d3e7a012bf --- /dev/null +++ b/dts/Bindings/media/rc.txt @@ -0,0 +1,117 @@ +The following properties are common to the infrared remote controllers: + +- linux,rc-map-name: string, specifies the scancode/key mapping table + defined in-kernel for the remote controller. Support values are: + * "rc-adstech-dvb-t-pci" + * "rc-alink-dtu-m" + * "rc-anysee" + * "rc-apac-viewcomp" + * "rc-asus-pc39" + * "rc-asus-ps3-100" + * "rc-ati-tv-wonder-hd-600" + * "rc-ati-x10" + * "rc-avermedia-a16d" + * "rc-avermedia-cardbus" + * "rc-avermedia-dvbt" + * "rc-avermedia-m135a" + * "rc-avermedia-m733a-rm-k6" + * "rc-avermedia-rm-ks" + * "rc-avermedia" + * "rc-avertv-303" + * "rc-azurewave-ad-tu700" + * "rc-behold-columbus" + * "rc-behold" + * "rc-budget-ci-old" + * "rc-cec" + * "rc-cinergy-1400" + * "rc-cinergy" + * "rc-delock-61959" + * "rc-dib0700-nec" + * "rc-dib0700-rc5" + * "rc-digitalnow-tinytwin" + * "rc-digittrade" + * "rc-dm1105-nec" + * "rc-dntv-live-dvbt-pro" + * "rc-dntv-live-dvb-t" + * "rc-dtt200u" + * "rc-dvbsky" + * "rc-empty" + * "rc-em-terratec" + * "rc-encore-enltv2" + * "rc-encore-enltv-fm53" + * "rc-encore-enltv" + * "rc-evga-indtube" + * "rc-eztv" + * "rc-flydvb" + * "rc-flyvideo" + * "rc-fusionhdtv-mce" + * "rc-gadmei-rm008z" + * "rc-geekbox" + * "rc-genius-tvgo-a11mce" + * "rc-gotview7135" + * "rc-hauppauge" + * "rc-imon-mce" + * "rc-imon-pad" + * "rc-iodata-bctv7e" + * "rc-it913x-v1" + * "rc-it913x-v2" + * "rc-kaiomy" + * "rc-kworld-315u" + * "rc-kworld-pc150u" + * "rc-kworld-plus-tv-analog" + * "rc-leadtek-y04g0051" + * "rc-lirc" + * "rc-lme2510" + * "rc-manli" + * "rc-medion-x10" + * "rc-medion-x10-digitainer" + * "rc-medion-x10-or2x" + * "rc-msi-digivox-ii" + * "rc-msi-digivox-iii" + * "rc-msi-tvanywhere-plus" + * "rc-msi-tvanywhere" + * "rc-nebula" + * "rc-nec-terratec-cinergy-xs" + * "rc-norwood" + * "rc-npgtech" + * "rc-pctv-sedna" + * "rc-pinnacle-color" + * "rc-pinnacle-grey" + * "rc-pinnacle-pctv-hd" + * "rc-pixelview-new" + * "rc-pixelview" + * "rc-pixelview-002t" + * "rc-pixelview-mk12" + * "rc-powercolor-real-angel" + * "rc-proteus-2309" + * "rc-purpletv" + * "rc-pv951" + * "rc-hauppauge" + * "rc-rc5-tv" + * "rc-rc6-mce" + * "rc-real-audio-220-32-keys" + * "rc-reddo" + * "rc-snapstream-firefly" + * "rc-streamzap" + * "rc-tbs-nec" + * "rc-technisat-ts35" + * "rc-technisat-usb2" + * "rc-terratec-cinergy-c-pci" + * "rc-terratec-cinergy-s2-hd" + * "rc-terratec-cinergy-xs" + * "rc-terratec-slim" + * "rc-terratec-slim-2" + * "rc-tevii-nec" + * "rc-tivo" + * "rc-total-media-in-hand" + * "rc-total-media-in-hand-02" + * "rc-trekstor" + * "rc-tt-1500" + * "rc-twinhan-dtv-cab-ci" + * "rc-twinhan1027" + * "rc-videomate-k100" + * "rc-videomate-s350" + * "rc-videomate-tv-pvr" + * "rc-winfast" + * "rc-winfast-usbii-deluxe" + * "rc-su3000" diff --git a/dts/Bindings/media/st,st-delta.txt b/dts/Bindings/media/st,st-delta.txt new file mode 100644 index 0000000000..a538ab30a6 --- /dev/null +++ b/dts/Bindings/media/st,st-delta.txt @@ -0,0 +1,17 @@ +* STMicroelectronics DELTA multi-format video decoder + +Required properties: +- compatible: should be "st,st-delta". +- clocks: from common clock binding: handle hardware IP needed clocks, the + number of clocks may depend on the SoC type. + See ../clock/clock-bindings.txt for details. +- clock-names: names of the clocks listed in clocks property in the same order. + +Example: + delta0 { + compatible = "st,st-delta"; + clock-names = "delta", "delta-st231", "delta-flash-promip"; + clocks = <&clk_s_c0_flexgen CLK_VID_DMU>, + <&clk_s_c0_flexgen CLK_ST231_DMU>, + <&clk_s_c0_flexgen CLK_FLASH_PROMIP>; + }; diff --git a/dts/Bindings/media/sunxi-ir.txt b/dts/Bindings/media/sunxi-ir.txt index 1811a067c7..302a0b183c 100644 --- a/dts/Bindings/media/sunxi-ir.txt +++ b/dts/Bindings/media/sunxi-ir.txt @@ -9,7 +9,7 @@ Required properties: - reg : should contain IO map address for IR. Optional properties: -- linux,rc-map-name : Remote control map name. +- linux,rc-map-name: see rc.txt file in the same directory. - resets : phandle + reset specifier pair Example: diff --git a/dts/Bindings/media/ti,da850-vpif.txt b/dts/Bindings/media/ti,da850-vpif.txt new file mode 100644 index 0000000000..6d25d7f23d --- /dev/null +++ b/dts/Bindings/media/ti,da850-vpif.txt @@ -0,0 +1,83 @@ +Texas Instruments VPIF +---------------------- + +The TI Video Port InterFace (VPIF) is the primary component for video +capture and display on the DA850/AM18x family of TI DaVinci/Sitara +SoCs. + +TI Document reference: SPRUH82C, Chapter 35 +http://www.ti.com/lit/pdf/spruh82 + +Required properties: +- compatible: must be "ti,da850-vpif" +- reg: physical base address and length of the registers set for the device; +- interrupts: should contain IRQ line for the VPIF + +Video Capture: + +VPIF has a 16-bit parallel bus input, supporting 2 8-bit channels or a +single 16-bit channel. It should contain at least one port child node +with child 'endpoint' node. Please refer to the bindings defined in +Documentation/devicetree/bindings/media/video-interfaces.txt. + +Example using 2 8-bit input channels, one of which is connected to an +I2C-connected TVP5147 decoder: + + vpif: vpif@217000 { + compatible = "ti,da850-vpif"; + reg = <0x217000 0x1000>; + interrupts = <92>; + + port { + vpif_ch0: endpoint@0 { + reg = <0>; + bus-width = <8>; + remote-endpoint = <&composite>; + }; + + vpif_ch1: endpoint@1 { + reg = <1>; + bus-width = <8>; + data-shift = <8>; + }; + }; + }; + +[ ... ] + +&i2c0 { + + tvp5147@5d { + compatible = "ti,tvp5147"; + reg = <0x5d>; + status = "okay"; + + port { + composite: endpoint { + hsync-active = <1>; + vsync-active = <1>; + pclk-sample = <0>; + + /* VPIF channel 0 (lower 8-bits) */ + remote-endpoint = <&vpif_ch0>; + bus-width = <8>; + }; + }; + }; +}; + + +Alternatively, an example when the bus is configured as a single +16-bit input (e.g. for raw-capture mode): + + vpif: vpif@217000 { + compatible = "ti,da850-vpif"; + reg = <0x217000 0x1000>; + interrupts = <92>; + + port { + vpif_ch0: endpoint { + bus-width = <16>; + }; + }; + }; |