1 files changed, 0 insertions, 44 deletions
diff --git a/dts/Bindings/memory-controllers/renesas,dbsc.txt b/dts/Bindings/memory-controllers/renesas,dbsc.txt
deleted file mode 100644
index 9f78e6c827..0000000000
--- a/dts/Bindings/memory-controllers/renesas,dbsc.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-DT bindings for Renesas R-Mobile and SH-Mobile memory controllers
-=================================================================
-
-Renesas R-Mobile and SH-Mobile SoCs contain one or more memory controllers.
-These memory controllers differ from one SoC variant to another, and are called
-by different names ("DDR Bus Controller (DBSC)", "DDR3 Bus State Controller
-(DBSC3)", "SDRAM Bus State Controller (SBSC)").
-
-Currently memory controller device nodes are used only to reference PM
-domains, and prevent these PM domains from being powered down, which would
-crash the system.
-
-As there exist no actual drivers for these controllers yet, these bindings
-should be considered EXPERIMENTAL for now.
-
-Required properties:
-  - compatible: Must be one of the following SoC-specific values:
-		  - "renesas,dbsc-r8a73a4" (R-Mobile APE6)
-		  - "renesas,dbsc3-r8a7740" (R-Mobile A1)
-		  - "renesas,sbsc-sh73a0" (SH-Mobile AG5)
-  - reg: Must contain the base address and length of the memory controller's
-	 registers.
-
-Optional properties:
-  - interrupts: Must contain a list of interrupt specifiers for memory
-		controller interrupts, if available.
-  - interrupt-names: Must contain a list of interrupt names corresponding to
-		     the interrupts in the interrupts property, if available.
-		     Valid interrupt names are:
-			- "sec" (secure interrupt)
-			- "temp" (normal (temperature) interrupt)
-  - power-domains: Must contain a reference to the PM domain that the memory
-		   controller belongs to, if available.
-
-Example:
-
-	sbsc1: memory-controller@fe400000 {
-		compatible = "renesas,sbsc-sh73a0";
-		reg = <0xfe400000 0x400>;
-		interrupts = <0 35 IRQ_TYPE_LEVEL_HIGH>,
-			     <0 36 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-names = "sec", "temp";
-		power-domains = <&pd_a4bc0>;
-	};