diff options
Diffstat (limited to 'dts/Bindings/memory-controllers')
15 files changed, 434 insertions, 234 deletions
diff --git a/dts/Bindings/memory-controllers/ath79-ddr-controller.txt b/dts/Bindings/memory-controllers/ath79-ddr-controller.txt deleted file mode 100644 index c81af75bcd..0000000000 --- a/dts/Bindings/memory-controllers/ath79-ddr-controller.txt +++ /dev/null @@ -1,35 +0,0 @@ -Binding for Qualcomm Atheros AR7xxx/AR9xxx DDR controller - -The DDR controller of the AR7xxx and AR9xxx families provides an interface -to flush the FIFO between various devices and the DDR. This is mainly used -by the IRQ controller to flush the FIFO before running the interrupt handler -of such devices. - -Required properties: - -- compatible: has to be "qca,<soc-type>-ddr-controller", - "qca,[ar7100|ar7240]-ddr-controller" as fallback. - On SoC with PCI support "qca,ar7100-ddr-controller" should be used as - fallback, otherwise "qca,ar7240-ddr-controller" should be used. -- reg: Base address and size of the controller's memory area -- #qca,ddr-wb-channel-cells: Specifies the number of cells needed to encode - the write buffer channel index, should be 1. - -Example: - - ddr_ctrl: memory-controller@18000000 { - compatible = "qca,ar9132-ddr-controller", - "qca,ar7240-ddr-controller"; - reg = <0x18000000 0x100>; - - #qca,ddr-wb-channel-cells = <1>; - }; - - ... - - interrupt-controller { - ... - qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>; - qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>, - <&ddr_ctrl 0>, <&ddr_ctrl 1>; - }; diff --git a/dts/Bindings/memory-controllers/brcm,dpfe-cpu.txt b/dts/Bindings/memory-controllers/brcm,dpfe-cpu.txt deleted file mode 100644 index 82d923ef41..0000000000 --- a/dts/Bindings/memory-controllers/brcm,dpfe-cpu.txt +++ /dev/null @@ -1,27 +0,0 @@ -DDR PHY Front End (DPFE) for Broadcom STB -========================================= - -DPFE and the DPFE firmware provide an interface for the host CPU to -communicate with the DCPU, which resides inside the DDR PHY. - -There are three memory regions for interacting with the DCPU. These are -specified in a single reg property. - -Required properties: - - compatible: must be "brcm,bcm7271-dpfe-cpu", "brcm,bcm7268-dpfe-cpu" - or "brcm,dpfe-cpu" - - reg: must reference three register ranges - - start address and length of the DCPU register space - - start address and length of the DCPU data memory space - - start address and length of the DCPU instruction memory space - - reg-names: must contain "dpfe-cpu", "dpfe-dmem", and "dpfe-imem"; - they must be in the same order as the register declarations - -Example: - dpfe_cpu0: dpfe-cpu@f1132000 { - compatible = "brcm,bcm7271-dpfe-cpu", "brcm,dpfe-cpu"; - reg = <0xf1132000 0x180 - 0xf1134000 0x1000 - 0xf1138000 0x4000>; - reg-names = "dpfe-cpu", "dpfe-dmem", "dpfe-imem"; - }; diff --git a/dts/Bindings/memory-controllers/brcm,dpfe-cpu.yaml b/dts/Bindings/memory-controllers/brcm,dpfe-cpu.yaml new file mode 100644 index 0000000000..769f132500 --- /dev/null +++ b/dts/Bindings/memory-controllers/brcm,dpfe-cpu.yaml @@ -0,0 +1,48 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/brcm,dpfe-cpu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: DDR PHY Front End (DPFE) for Broadcom STB + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Markus Mayer <mmayer@broadcom.com> + +properties: + compatible: + items: + - enum: + - brcm,bcm7271-dpfe-cpu + - brcm,bcm7268-dpfe-cpu + - const: brcm,dpfe-cpu + + reg: + items: + - description: DCPU register space + - description: DCPU data memory space + - description: DCPU instruction memory space + + reg-names: + items: + - const: dpfe-cpu + - const: dpfe-dmem + - const: dpfe-imem + +required: + - compatible + - reg + - reg-names + +additionalProperties: false + +examples: + - | + dpfe-cpu@f1132000 { + compatible = "brcm,bcm7271-dpfe-cpu", "brcm,dpfe-cpu"; + reg = <0xf1132000 0x180>, + <0xf1134000 0x1000>, + <0xf1138000 0x4000>; + reg-names = "dpfe-cpu", "dpfe-dmem", "dpfe-imem"; + }; diff --git a/dts/Bindings/memory-controllers/exynos5422-dmc.txt b/dts/Bindings/memory-controllers/exynos5422-dmc.txt deleted file mode 100644 index 02e4a1f862..0000000000 --- a/dts/Bindings/memory-controllers/exynos5422-dmc.txt +++ /dev/null @@ -1,84 +0,0 @@ -* Exynos5422 frequency and voltage scaling for Dynamic Memory Controller device - -The Samsung Exynos5422 SoC has DMC (Dynamic Memory Controller) to which the DRAM -memory chips are connected. The driver is to monitor the controller in runtime -and switch frequency and voltage. To monitor the usage of the controller in -runtime, the driver uses the PPMU (Platform Performance Monitoring Unit), which -is able to measure the current load of the memory. -When 'userspace' governor is used for the driver, an application is able to -switch the DMC and memory frequency. - -Required properties for DMC device for Exynos5422: -- compatible: Should be "samsung,exynos5422-dmc". -- clocks : list of clock specifiers, must contain an entry for each - required entry in clock-names for CLK_FOUT_SPLL, CLK_MOUT_SCLK_SPLL, - CLK_FF_DOUT_SPLL2, CLK_FOUT_BPLL, CLK_MOUT_BPLL, CLK_SCLK_BPLL, - CLK_MOUT_MX_MSPLL_CCORE, CLK_MOUT_MX_MSPLL_CCORE_PHY, CLK_MOUT_MCLK_CDREX, -- clock-names : should include "fout_spll", "mout_sclk_spll", "ff_dout_spll2", - "fout_bpll", "mout_bpll", "sclk_bpll", "mout_mx_mspll_ccore", - "mout_mclk_cdrex" entries -- devfreq-events : phandles for PPMU devices connected to this DMC. -- vdd-supply : phandle for voltage regulator which is connected. -- reg : registers of two CDREX controllers. -- operating-points-v2 : phandle for OPPs described in v2 definition. -- device-handle : phandle of the connected DRAM memory device. For more - information please refer to documentation file: - Documentation/devicetree/bindings/ddr/lpddr3.txt -- devfreq-events : phandles of the PPMU events used by the controller. -- samsung,syscon-clk : phandle of the clock register set used by the controller, - these registers are used for enabling a 'pause' feature and are not - exposed by clock framework but they must be used in a safe way. - The register offsets are in the driver code and specyfic for this SoC - type. - -Optional properties for DMC device for Exynos5422: -- interrupt-parent : The parent interrupt controller. -- interrupts : Contains the IRQ line numbers for the DMC internal performance - event counters in DREX0 and DREX1 channels. Align with specification of the - interrupt line(s) in the interrupt-parent controller. -- interrupt-names : IRQ names "drex_0" and "drex_1", the order should be the - same as in the 'interrupts' list above. - -Example: - - ppmu_dmc0_0: ppmu@10d00000 { - compatible = "samsung,exynos-ppmu"; - reg = <0x10d00000 0x2000>; - clocks = <&clock CLK_PCLK_PPMU_DREX0_0>; - clock-names = "ppmu"; - events { - ppmu_event_dmc0_0: ppmu-event3-dmc0_0 { - event-name = "ppmu-event3-dmc0_0"; - }; - }; - }; - - dmc: memory-controller@10c20000 { - compatible = "samsung,exynos5422-dmc"; - reg = <0x10c20000 0x10000>, <0x10c30000 0x10000>; - clocks = <&clock CLK_FOUT_SPLL>, - <&clock CLK_MOUT_SCLK_SPLL>, - <&clock CLK_FF_DOUT_SPLL2>, - <&clock CLK_FOUT_BPLL>, - <&clock CLK_MOUT_BPLL>, - <&clock CLK_SCLK_BPLL>, - <&clock CLK_MOUT_MX_MSPLL_CCORE>, - <&clock CLK_MOUT_MCLK_CDREX>; - clock-names = "fout_spll", - "mout_sclk_spll", - "ff_dout_spll2", - "fout_bpll", - "mout_bpll", - "sclk_bpll", - "mout_mx_mspll_ccore", - "mout_mclk_cdrex"; - operating-points-v2 = <&dmc_opp_table>; - devfreq-events = <&ppmu_event3_dmc0_0>, <&ppmu_event3_dmc0_1>, - <&ppmu_event3_dmc1_0>, <&ppmu_event3_dmc1_1>; - device-handle = <&samsung_K3QF2F20DB>; - vdd-supply = <&buck1_reg>; - samsung,syscon-clk = <&clock>; - interrupt-parent = <&combiner>; - interrupts = <16 0>, <16 1>; - interrupt-names = "drex_0", "drex_1"; - }; diff --git a/dts/Bindings/memory-controllers/marvell,mvebu-sdram-controller.yaml b/dts/Bindings/memory-controllers/marvell,mvebu-sdram-controller.yaml new file mode 100644 index 0000000000..14a6bc8f42 --- /dev/null +++ b/dts/Bindings/memory-controllers/marvell,mvebu-sdram-controller.yaml @@ -0,0 +1,31 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/marvell,mvebu-sdram-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Marvell MVEBU SDRAM controller + +maintainers: + - Jan Luebbe <jlu@pengutronix.de> + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +properties: + compatible: + const: marvell,armada-xp-sdram-controller + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + memory-controller@1400 { + compatible = "marvell,armada-xp-sdram-controller"; + reg = <0x1400 0x500>; + }; diff --git a/dts/Bindings/memory-controllers/mvebu-sdram-controller.txt b/dts/Bindings/memory-controllers/mvebu-sdram-controller.txt deleted file mode 100644 index 89657d1d4c..0000000000 --- a/dts/Bindings/memory-controllers/mvebu-sdram-controller.txt +++ /dev/null @@ -1,21 +0,0 @@ -Device Tree bindings for MVEBU SDRAM controllers - -The Marvell EBU SoCs all have a SDRAM controller. The SDRAM controller -differs from one SoC variant to another, but they also share a number -of commonalities. - -For now, this Device Tree binding documentation only documents the -Armada XP SDRAM controller. - -Required properties: - - - compatible: for Armada XP, "marvell,armada-xp-sdram-controller" - - reg: a resource specifier for the register space, which should - include all SDRAM controller registers as per the datasheet. - -Example: - -sdramc@1400 { - compatible = "marvell,armada-xp-sdram-controller"; - reg = <0x1400 0x500>; -}; diff --git a/dts/Bindings/memory-controllers/qca,ath79-ddr-controller.yaml b/dts/Bindings/memory-controllers/qca,ath79-ddr-controller.yaml new file mode 100644 index 0000000000..9566b3421f --- /dev/null +++ b/dts/Bindings/memory-controllers/qca,ath79-ddr-controller.yaml @@ -0,0 +1,61 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/qca,ath79-ddr-controller.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Atheros AR7xxx/AR9xxx DDR controller + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: | + The DDR controller of the AR7xxx and AR9xxx families provides an interface to + flush the FIFO between various devices and the DDR. This is mainly used by + the IRQ controller to flush the FIFO before running the interrupt handler of + such devices. + +properties: + compatible: + oneOf: + - items: + - const: qca,ar9132-ddr-controller + - const: qca,ar7240-ddr-controller + - items: + - enum: + - qca,ar7100-ddr-controller + - qca,ar7240-ddr-controller + + "#qca,ddr-wb-channel-cells": + description: | + Specifies the number of cells needed to encode the write buffer channel + index. + $ref: /schemas/types.yaml#/definitions/uint32 + const: 1 + + reg: + maxItems: 1 + +required: + - compatible + - "#qca,ddr-wb-channel-cells" + - reg + +additionalProperties: false + +examples: + - | + ddr_ctrl: memory-controller@18000000 { + compatible = "qca,ar9132-ddr-controller", + "qca,ar7240-ddr-controller"; + reg = <0x18000000 0x100>; + + #qca,ddr-wb-channel-cells = <1>; + }; + + interrupt-controller { + // ... + qca,ddr-wb-channel-interrupts = <2>, <3>, <4>, <5>; + qca,ddr-wb-channels = <&ddr_ctrl 3>, <&ddr_ctrl 2>, + <&ddr_ctrl 0>, <&ddr_ctrl 1>; + }; diff --git a/dts/Bindings/memory-controllers/renesas,h8300-bsc.txt b/dts/Bindings/memory-controllers/renesas,h8300-bsc.txt deleted file mode 100644 index cdf406c902..0000000000 --- a/dts/Bindings/memory-controllers/renesas,h8300-bsc.txt +++ /dev/null @@ -1,12 +0,0 @@ -* H8/300 bus controller - -Required properties: - - compatible: Must be "renesas,h8300-bsc". - - reg: Base address and length of BSC registers. - -Example. - bsc: memory-controller@fee01e { - compatible = "renesas,h8300h-bsc", "renesas,h8300-bsc"; - reg = <0xfee01e 8>; - }; - diff --git a/dts/Bindings/memory-controllers/renesas,h8300-bsc.yaml b/dts/Bindings/memory-controllers/renesas,h8300-bsc.yaml new file mode 100644 index 0000000000..2b18cef995 --- /dev/null +++ b/dts/Bindings/memory-controllers/renesas,h8300-bsc.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/renesas,h8300-bsc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: H8/300 bus controller + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Yoshinori Sato <ysato@users.sourceforge.jp> + +properties: + compatible: + items: + - enum: + - renesas,h8300h-bsc + - renesas,h8s-bsc + - const: renesas,h8300-bsc + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + memory-controller@fee01e { + compatible = "renesas,h8300h-bsc", "renesas,h8300-bsc"; + reg = <0xfee01e 8>; + }; diff --git a/dts/Bindings/memory-controllers/renesas,rpc-if.yaml b/dts/Bindings/memory-controllers/renesas,rpc-if.yaml index 990489fdd2..d25072c414 100644 --- a/dts/Bindings/memory-controllers/renesas,rpc-if.yaml +++ b/dts/Bindings/memory-controllers/renesas,rpc-if.yaml @@ -61,12 +61,23 @@ patternProperties: type: object properties: compatible: - enum: - - cfi-flash - - jedec,spi-nor + contains: + enum: + - cfi-flash + - jedec,spi-nor unevaluatedProperties: false +required: + - compatible + - reg + - reg-names + - clocks + - power-domains + - resets + - '#address-cells' + - '#size-cells' + examples: - | #include <dt-bindings/clock/renesas-cpg-mssr.h> diff --git a/dts/Bindings/memory-controllers/samsung,exynos5422-dmc.yaml b/dts/Bindings/memory-controllers/samsung,exynos5422-dmc.yaml new file mode 100644 index 0000000000..6f4fd5814b --- /dev/null +++ b/dts/Bindings/memory-controllers/samsung,exynos5422-dmc.yaml @@ -0,0 +1,137 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/samsung,exynos5422-dmc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: | + Samsung Exynos5422 SoC frequency and voltage scaling for Dynamic Memory + Controller device + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Lukasz Luba <lukasz.luba@arm.com> + +description: | + The Samsung Exynos5422 SoC has DMC (Dynamic Memory Controller) to which the + DRAM memory chips are connected. The driver is to monitor the controller in + runtime and switch frequency and voltage. To monitor the usage of the + controller in runtime, the driver uses the PPMU (Platform Performance + Monitoring Unit), which is able to measure the current load of the memory. + When 'userspace' governor is used for the driver, an application is able to + switch the DMC and memory frequency. + +properties: + compatible: + items: + - const: samsung,exynos5422-dmc + + clock-names: + items: + - const: fout_spll + - const: mout_sclk_spll + - const: ff_dout_spll2 + - const: fout_bpll + - const: mout_bpll + - const: sclk_bpll + - const: mout_mx_mspll_ccore + - const: mout_mclk_cdrex + + clocks: + minItems: 8 + maxItems: 8 + + devfreq-events: + $ref: '/schemas/types.yaml#/definitions/phandle-array' + minItems: 1 + maxItems: 16 + description: phandles of the PPMU events used by the controller. + + device-handle: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + phandle of the connected DRAM memory device. For more information please + refer to documentation file: Documentation/devicetree/bindings/ddr/lpddr3.txt + + operating-points-v2: true + + interrupts: + items: + - description: DMC internal performance event counters in DREX0 + - description: DMC internal performance event counters in DREX1 + + interrupt-names: + items: + - const: drex_0 + - const: drex_1 + + reg: + items: + - description: registers of DREX0 + - description: registers of DREX1 + + samsung,syscon-clk: + $ref: '/schemas/types.yaml#/definitions/phandle' + description: | + Phandle of the clock register set used by the controller, these registers + are used for enabling a 'pause' feature and are not exposed by clock + framework but they must be used in a safe way. The register offsets are + in the driver code and specyfic for this SoC type. + + vdd-supply: true + +required: + - compatible + - clock-names + - clocks + - devfreq-events + - device-handle + - reg + - samsung,syscon-clk + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/exynos5420.h> + ppmu_dmc0_0: ppmu@10d00000 { + compatible = "samsung,exynos-ppmu"; + reg = <0x10d00000 0x2000>; + clocks = <&clock CLK_PCLK_PPMU_DREX0_0>; + clock-names = "ppmu"; + events { + ppmu_event_dmc0_0: ppmu-event3-dmc0-0 { + event-name = "ppmu-event3-dmc0_0"; + }; + }; + }; + + memory-controller@10c20000 { + compatible = "samsung,exynos5422-dmc"; + reg = <0x10c20000 0x10000>, <0x10c30000 0x10000>; + clocks = <&clock CLK_FOUT_SPLL>, + <&clock CLK_MOUT_SCLK_SPLL>, + <&clock CLK_FF_DOUT_SPLL2>, + <&clock CLK_FOUT_BPLL>, + <&clock CLK_MOUT_BPLL>, + <&clock CLK_SCLK_BPLL>, + <&clock CLK_MOUT_MX_MSPLL_CCORE>, + <&clock CLK_MOUT_MCLK_CDREX>; + clock-names = "fout_spll", + "mout_sclk_spll", + "ff_dout_spll2", + "fout_bpll", + "mout_bpll", + "sclk_bpll", + "mout_mx_mspll_ccore", + "mout_mclk_cdrex"; + operating-points-v2 = <&dmc_opp_table>; + devfreq-events = <&ppmu_event3_dmc0_0>, <&ppmu_event3_dmc0_1>, + <&ppmu_event3_dmc1_0>, <&ppmu_event3_dmc1_1>; + device-handle = <&samsung_K3QF2F20DB>; + vdd-supply = <&buck1_reg>; + samsung,syscon-clk = <&clock>; + interrupt-parent = <&combiner>; + interrupts = <16 0>, <16 1>; + interrupt-names = "drex_0", "drex_1"; + }; diff --git a/dts/Bindings/memory-controllers/synopsys,ddrc-ecc.yaml b/dts/Bindings/memory-controllers/synopsys,ddrc-ecc.yaml new file mode 100644 index 0000000000..a245884746 --- /dev/null +++ b/dts/Bindings/memory-controllers/synopsys,ddrc-ecc.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/synopsys,ddrc-ecc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synopsys IntelliDDR Multi Protocol memory controller + +maintainers: + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + - Manish Narani <manish.narani@xilinx.com> + - Michal Simek <michal.simek@xilinx.com> + +description: | + The ZynqMP DDR ECC controller has an optional ECC support in 64-bit and + 32-bit bus width configurations. + + The Zynq DDR ECC controller has an optional ECC support in half-bus width + (16-bit) configuration. + + These both ECC controllers correct single bit ECC errors and detect double bit + ECC errors. + +properties: + compatible: + enum: + - xlnx,zynq-ddrc-a05 + - xlnx,zynqmp-ddrc-2.40a + + interrupts: + maxItems: 1 + + reg: + maxItems: 1 + +required: + - compatible + - reg + +allOf: + - if: + properties: + compatible: + contains: + const: xlnx,zynqmp-ddrc-2.40a + then: + required: + - interrupts + else: + properties: + interrupts: false + +additionalProperties: false + +examples: + - | + memory-controller@f8006000 { + compatible = "xlnx,zynq-ddrc-a05"; + reg = <0xf8006000 0x1000>; + }; + + - | + axi { + #address-cells = <2>; + #size-cells = <2>; + + memory-controller@fd070000 { + compatible = "xlnx,zynqmp-ddrc-2.40a"; + reg = <0x0 0xfd070000 0x0 0x30000>; + interrupt-parent = <&gic>; + interrupts = <0 112 4>; + }; + }; diff --git a/dts/Bindings/memory-controllers/synopsys.txt b/dts/Bindings/memory-controllers/synopsys.txt deleted file mode 100644 index 9d32762c47..0000000000 --- a/dts/Bindings/memory-controllers/synopsys.txt +++ /dev/null @@ -1,32 +0,0 @@ -Binding for Synopsys IntelliDDR Multi Protocol Memory Controller - -The ZynqMP DDR ECC controller has an optional ECC support in 64-bit and 32-bit -bus width configurations. - -The Zynq DDR ECC controller has an optional ECC support in half-bus width -(16-bit) configuration. - -These both ECC controllers correct single bit ECC errors and detect double bit -ECC errors. - -Required properties: - - compatible: One of: - - 'xlnx,zynq-ddrc-a05' : Zynq DDR ECC controller - - 'xlnx,zynqmp-ddrc-2.40a' : ZynqMP DDR ECC controller - - reg: Should contain DDR controller registers location and length. - -Required properties for "xlnx,zynqmp-ddrc-2.40a": - - interrupts: Property with a value describing the interrupt number. - -Example: - memory-controller@f8006000 { - compatible = "xlnx,zynq-ddrc-a05"; - reg = <0xf8006000 0x1000>; - }; - - mc: memory-controller@fd070000 { - compatible = "xlnx,zynqmp-ddrc-2.40a"; - reg = <0x0 0xfd070000 0x0 0x30000>; - interrupt-parent = <&gic>; - interrupts = <0 112 4>; - }; diff --git a/dts/Bindings/memory-controllers/ti,da8xx-ddrctl.yaml b/dts/Bindings/memory-controllers/ti,da8xx-ddrctl.yaml new file mode 100644 index 0000000000..9ed51185ff --- /dev/null +++ b/dts/Bindings/memory-controllers/ti,da8xx-ddrctl.yaml @@ -0,0 +1,35 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/memory-controllers/ti,da8xx-ddrctl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments da8xx DDR2/mDDR memory controller + +maintainers: + - Bartosz Golaszewski <bgolaszewski@baylibre.com> + - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com> + +description: | + Documentation: + OMAP-L138 (DA850) - http://www.ti.com/lit/ug/spruh82c/spruh82c.pdf + +properties: + compatible: + const: ti,da850-ddr-controller + + reg: + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + memory-controller@b0000000 { + compatible = "ti,da850-ddr-controller"; + reg = <0xb0000000 0xe8>; + }; diff --git a/dts/Bindings/memory-controllers/ti-da8xx-ddrctl.txt b/dts/Bindings/memory-controllers/ti-da8xx-ddrctl.txt deleted file mode 100644 index ec1dd408d5..0000000000 --- a/dts/Bindings/memory-controllers/ti-da8xx-ddrctl.txt +++ /dev/null @@ -1,20 +0,0 @@ -* Device tree bindings for Texas Instruments da8xx DDR2/mDDR memory controller - -The DDR2/mDDR memory controller present on Texas Instruments da8xx SoCs features -a set of registers which allow to tweak the controller's behavior. - -Documentation: -OMAP-L138 (DA850) - http://www.ti.com/lit/ug/spruh82c/spruh82c.pdf - -Required properties: - -- compatible: "ti,da850-ddr-controller" - for da850 SoC based boards -- reg: a tuple containing the base address of the memory - controller and the size of the memory area to map - -Example for da850 shown below. - -ddrctl { - compatible = "ti,da850-ddr-controller"; - reg = <0xb0000000 0xe8>; -}; |