diff options
Diffstat (limited to 'dts/Bindings/mfd/aspeed-lpc.yaml')
| -rw-r--r-- | dts/Bindings/mfd/aspeed-lpc.yaml | 199 |
1 files changed, 199 insertions, 0 deletions
diff --git a/dts/Bindings/mfd/aspeed-lpc.yaml b/dts/Bindings/mfd/aspeed-lpc.yaml new file mode 100644 index 0000000000..5dfe77aca1 --- /dev/null +++ b/dts/Bindings/mfd/aspeed-lpc.yaml @@ -0,0 +1,199 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# # Copyright (c) 2021 Aspeed Tehchnology Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/aspeed-lpc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aspeed Low Pin Count (LPC) Bus Controller + +maintainers: + - Andrew Jeffery <andrew@aj.id.au> + - Chia-Wei Wang <chiawei_wang@aspeedtech.com> + +description: + The LPC bus is a means to bridge a host CPU to a number of low-bandwidth + peripheral devices, replacing the use of the ISA bus in the age of PCI[0]. The + primary use case of the Aspeed LPC controller is as a slave on the bus + (typically in a Baseboard Management Controller SoC), but under certain + conditions it can also take the role of bus master. + + The LPC controller is represented as a multi-function device to account for the + mix of functionality, which includes, but is not limited to + + * An IPMI Block Transfer[2] Controller + + * An LPC Host Interface Controller manages functions exposed to the host such + as LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART + management and bus snoop configuration. + + * A set of SuperIO[3] scratch registers enabling implementation of e.g. custom + hardware management protocols for handover between the host and baseboard + management controller. + + Additionally the state of the LPC controller influences the pinmux + configuration, therefore the host portion of the controller is exposed as a + syscon as a means to arbitrate access. + +properties: + compatible: + items: + - enum: + - aspeed,ast2400-lpc-v2 + - aspeed,ast2500-lpc-v2 + - aspeed,ast2600-lpc-v2 + - const: simple-mfd + - const: syscon + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: true + +patternProperties: + "^lpc-ctrl@[0-9a-f]+$": + type: object + additionalProperties: false + + description: | + The LPC Host Interface Controller manages functions exposed to the host such as + LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART management + and bus snoop configuration. + + properties: + compatible: + items: + - enum: + - aspeed,ast2400-lpc-ctrl + - aspeed,ast2500-lpc-ctrl + - aspeed,ast2600-lpc-ctrl + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + memory-region: + maxItems: 1 + description: handle to memory reservation for the LPC to AHB mapping region + + flash: + $ref: /schemas/types.yaml#/definitions/phandle + description: The SPI flash controller containing the flash to be exposed over the LPC to AHB mapping + + required: + - compatible + - clocks + + "^reset-controller@[0-9a-f]+$": + type: object + additionalProperties: false + + description: + The UARTs present in the ASPEED SoC can have their resets tied to the reset + state of the LPC bus. Some systems may chose to modify this configuration + + properties: + compatible: + items: + - enum: + - aspeed,ast2400-lpc-reset + - aspeed,ast2500-lpc-reset + - aspeed,ast2600-lpc-reset + + reg: + maxItems: 1 + + '#reset-cells': + const: 1 + + required: + - compatible + - '#reset-cells' + + "^lpc-snoop@[0-9a-f]+$": + type: object + additionalProperties: false + + description: + The LPC snoop interface allows the BMC to listen on and record the data + bytes written by the Host to the targeted LPC I/O pots. + + properties: + compatible: + items: + - enum: + - aspeed,ast2400-lpc-snoop + - aspeed,ast2500-lpc-snoop + - aspeed,ast2600-lpc-snoop + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + snoop-ports: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: The LPC I/O ports to snoop + + required: + - compatible + - interrupts + - snoop-ports + + "^uart-routing@[0-9a-f]+$": + $ref: /schemas/soc/aspeed/uart-routing.yaml# + description: The UART routing control under LPC register space + +required: + - compatible + - reg + - "#address-cells" + - "#size-cells" + - ranges + +additionalProperties: + type: object + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/ast2600-clock.h> + + lpc: lpc@1e789000 { + compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon"; + reg = <0x1e789000 0x1000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e789000 0x1000>; + + lpc_ctrl: lpc-ctrl@80 { + compatible = "aspeed,ast2600-lpc-ctrl"; + reg = <0x80 0x80>; + clocks = <&syscon ASPEED_CLK_GATE_LCLK>; + memory-region = <&flash_memory>; + flash = <&spi>; + }; + + lpc_reset: reset-controller@98 { + compatible = "aspeed,ast2600-lpc-reset"; + reg = <0x98 0x4>; + #reset-cells = <1>; + }; + + lpc_snoop: lpc-snoop@90 { + compatible = "aspeed,ast2600-lpc-snoop"; + reg = <0x90 0x8>; + interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; + snoop-ports = <0x80>; + }; + }; |