diff options
Diffstat (limited to 'dts/Bindings/mfd/max77686.txt')
| -rw-r--r-- | dts/Bindings/mfd/max77686.txt | 65 |
1 files changed, 5 insertions, 60 deletions
diff --git a/dts/Bindings/mfd/max77686.txt b/dts/Bindings/mfd/max77686.txt index 163bd81a46..741e76688c 100644 --- a/dts/Bindings/mfd/max77686.txt +++ b/dts/Bindings/mfd/max77686.txt @@ -7,8 +7,9 @@ different i2c slave address,presently for which we are statically creating i2c client while probing.This document describes the binding for mfd device and PMIC submodule. -Binding for the built-in 32k clock generator block is defined separately -in bindings/clk/maxim,max77686.txt file. +Bindings for the built-in 32k clock generator block and +regulators are defined in ../clk/maxim,max77686.txt and +../regulator/max77686.txt respectively. Required properties: - compatible : Must be "maxim,max77686"; @@ -16,67 +17,11 @@ Required properties: - interrupts : This i2c device has an IRQ line connected to the main SoC. - interrupt-parent : The parent interrupt controller. -Optional node: -- voltage-regulators : The regulators of max77686 have to be instantiated - under subnode named "voltage-regulators" using the following format. - - regulator_name { - regulator-compatible = LDOn/BUCKn - standard regulator constraints.... - }; - refer Documentation/devicetree/bindings/regulator/regulator.txt - - The regulator-compatible property of regulator should initialized with string -to get matched with their hardware counterparts as follow: - - -LDOn : for LDOs, where n can lie in range 1 to 26. - example: LDO1, LDO2, LDO26. - -BUCKn : for BUCKs, where n can lie in range 1 to 9. - example: BUCK1, BUCK5, BUCK9. - - Regulators which can be turned off during system suspend: - -LDOn : 2, 6-8, 10-12, 14-16, - -BUCKn : 1-4. - Use standard regulator bindings for it ('regulator-off-in-suspend'). - - LDO20, LDO21, LDO22, BUCK8 and BUCK9 can be configured to GPIO enable - control. To turn this feature on this property must be added to the regulator - sub-node: - - maxim,ena-gpios : one GPIO specifier enable control (the gpio - flags are actually ignored and always - ACTIVE_HIGH is used) - Example: - max77686@09 { + max77686: pmic@09 { compatible = "maxim,max77686"; interrupt-parent = <&wakeup_eint>; interrupts = <26 0>; reg = <0x09>; - - voltage-regulators { - ldo11_reg { - regulator-compatible = "LDO11"; - regulator-name = "vdd_ldo11"; - regulator-min-microvolt = <1900000>; - regulator-max-microvolt = <1900000>; - regulator-always-on; - }; - - buck1_reg { - regulator-compatible = "BUCK1"; - regulator-name = "vdd_mif"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1300000>; - regulator-always-on; - regulator-boot-on; - }; - - buck9_reg { - regulator-compatible = "BUCK9"; - regulator-name = "CAM_ISP_CORE_1.2V"; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <1200000>; - maxim,ena-gpios = <&gpm0 3 GPIO_ACTIVE_HIGH>; - }; - } + }; |