1 files changed, 0 insertions, 117 deletions
diff --git a/dts/Bindings/mfd/max8998.txt b/dts/Bindings/mfd/max8998.txt
deleted file mode 100644
index 5f2f07c09c..0000000000
--- a/dts/Bindings/mfd/max8998.txt
+++ /dev/null
@@ -1,117 +0,0 @@
-* Maxim MAX8998, National/TI LP3974 multi-function device
-
-The Maxim MAX8998 is a multi-function device which includes voltage/current
-regulators, real time clock, battery charging controller and several
-other sub-blocks. It is interfaced using an I2C interface. Each sub-block
-is addressed by the host system using different i2c slave address.
-
-PMIC sub-block
---------------
-
-The PMIC sub-block contains a number of voltage and current regulators,
-with controllable parameters and dynamic voltage scaling capability.
-In addition, it includes a real time clock and battery charging controller
-as well. It is accessible at I2C address 0x66.
-
-Required properties:
-- compatible: Should be one of the following:
-    - "maxim,max8998" for Maxim MAX8998
-    - "national,lp3974" or "ti,lp3974" for National/TI LP3974.
-- reg: Specifies the i2c slave address of the pmic block. It should be 0x66.
-
-Optional properties:
-- interrupts: Interrupt specifiers for two interrupt sources.
-  - First interrupt specifier is for main interrupt.
-  - Second interrupt specifier is for power-on/-off interrupt.
-- max8998,pmic-buck1-dvs-gpios: GPIO specifiers for two host gpios used
-  for buck 1 dvs. The format of the gpio specifier depends on the gpio
-  controller.
-- max8998,pmic-buck2-dvs-gpio: GPIO specifier for host gpio used
-  for buck 2 dvs. The format of the gpio specifier depends on the gpio
-  controller.
-- max8998,pmic-buck1-default-dvs-idx: Default voltage setting selected from
-  the possible 4 options selectable by the dvs gpios. The value of this
-  property should be 0, 1, 2 or 3. If not specified or out of range,
-  a default value of 0 is taken.
-- max8998,pmic-buck2-default-dvs-idx: Default voltage setting selected from
-  the possible 2 options selectable by the dvs gpios. The value of this
-  property should be 0 or 1. If not specified or out of range, a default
-  value of 0 is taken.
-- max8998,pmic-buck-voltage-lock: If present, disallows changing of
-  preprogrammed buck dvfs voltages.
-
-Additional properties required if max8998,pmic-buck1-dvs-gpios is defined:
-- max8998,pmic-buck1-dvs-voltage: An array of 4 voltage values in microvolts
-  for buck1 regulator that can be selected using dvs gpio.
-
-Additional properties required if max8998,pmic-buck2-dvs-gpio is defined:
-- max8998,pmic-buck2-dvs-voltage: An array of 2 voltage values in microvolts
-  for buck2 regulator that can be selected using dvs gpio.
-
-Regulators: All the regulators of MAX8998 to be instantiated shall be
-listed in a child node named 'regulators'. Each regulator is represented
-by a child node of the 'regulators' node.
-
-	regulator-name {
-		/* standard regulator bindings here */
-	};
-
-Following regulators of the MAX8998 PMIC block are supported. Note that
-the 'n' in regulator name, as in LDOn or BUCKn, represents the LDO or BUCK
-number as described in MAX8998 datasheet.
-
-	- LDOn
-		  - valid values for n are 2 to 17
-		  - Example: LDO2, LDO10, LDO17
-	- BUCKn
-		  - valid values for n are 1 to 4.
-		  - Example: BUCK1, BUCK2, BUCK3, BUCK4
-
-	- ENVICHG: Battery Charging Current Monitor Output. This is a fixed
-		   voltage type regulator
-
-	- ESAFEOUT1: (ldo19)
-	- ESAFEOUT2: (ld020)
-
-Standard regulator bindings are used inside regulator subnodes. Check
-  Documentation/devicetree/bindings/regulator/regulator.txt
-for more details.
-
-Example:
-
-	pmic@66 {
-		compatible = "maxim,max8998-pmic";
-		reg = <0x66>;
-		interrupt-parent = <&wakeup_eint>;
-		interrupts = <4 0>, <3 0>;
-
-		/* Buck 1 DVS settings */
-		max8998,pmic-buck1-default-dvs-idx = <0>;
-		max8998,pmic-buck1-dvs-gpios = <&gpx0 0 1 0 0>, /* SET1 */
-					       <&gpx0 1 1 0 0>; /* SET2 */
-		max8998,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
-						 <1000000>, <950000>;
-
-		/* Buck 2 DVS settings */
-		max8998,pmic-buck2-default-dvs-idx = <0>;
-		max8998,pmic-buck2-dvs-gpio = <&gpx0 0 3 0 0>; /* SET3 */
-		max8998,pmic-buck2-dvs-voltage = <1350000>, <1300000>;
-
-		/* Regulators to instantiate */
-		regulators {
-			ldo2_reg: LDO2 {
-				regulator-name = "VDD_ALIVE_1.1V";
-				regulator-min-microvolt = <1100000>;
-				regulator-max-microvolt = <1100000>;
-				regulator-always-on;
-			};
-
-			buck1_reg: BUCK1 {
-				regulator-name = "VDD_ARM_1.2V";
-				regulator-min-microvolt = <950000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-boot-on;
-			};
-		};
-	};