summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/mfd/omap-usb-host.txt
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/mfd/omap-usb-host.txt')
-rw-r--r--dts/Bindings/mfd/omap-usb-host.txt103
1 files changed, 103 insertions, 0 deletions
diff --git a/dts/Bindings/mfd/omap-usb-host.txt b/dts/Bindings/mfd/omap-usb-host.txt
new file mode 100644
index 0000000000..4721b2d521
--- /dev/null
+++ b/dts/Bindings/mfd/omap-usb-host.txt
@@ -0,0 +1,103 @@
+OMAP HS USB Host
+
+Required properties:
+
+- compatible: should be "ti,usbhs-host"
+- reg: should contain one register range i.e. start and length
+- ti,hwmods: must contain "usb_host_hs"
+
+Optional properties:
+
+- num-ports: number of USB ports. Usually this is automatically detected
+ from the IP's revision register but can be overridden by specifying
+ this property. A maximum of 3 ports are supported at the moment.
+
+- portN-mode: String specifying the port mode for port N, where N can be
+ from 1 to 3. If the port mode is not specified, that port is treated
+ as unused. When specified, it must be one of the following.
+ "ehci-phy",
+ "ehci-tll",
+ "ehci-hsic",
+ "ohci-phy-6pin-datse0",
+ "ohci-phy-6pin-dpdm",
+ "ohci-phy-3pin-datse0",
+ "ohci-phy-4pin-dpdm",
+ "ohci-tll-6pin-datse0",
+ "ohci-tll-6pin-dpdm",
+ "ohci-tll-3pin-datse0",
+ "ohci-tll-4pin-dpdm",
+ "ohci-tll-2pin-datse0",
+ "ohci-tll-2pin-dpdm",
+
+- single-ulpi-bypass: Must be present if the controller contains a single
+ ULPI bypass control bit. e.g. OMAP3 silicon <= ES2.1
+
+- clocks: a list of phandles and clock-specifier pairs, one for each entry in
+ clock-names.
+
+- clock-names: should include:
+ For OMAP3
+ * "usbhost_120m_fck" - 120MHz Functional clock.
+
+ For OMAP4+
+ * "refclk_60m_int" - 60MHz internal reference clock for UTMI clock mux
+ * "refclk_60m_ext_p1" - 60MHz external ref. clock for Port 1's UTMI clock mux.
+ * "refclk_60m_ext_p2" - 60MHz external ref. clock for Port 2's UTMI clock mux
+ * "utmi_p1_gfclk" - Port 1 UTMI clock mux.
+ * "utmi_p2_gfclk" - Port 2 UTMI clock mux.
+ * "usb_host_hs_utmi_p1_clk" - Port 1 UTMI clock gate.
+ * "usb_host_hs_utmi_p2_clk" - Port 2 UTMI clock gate.
+ * "usb_host_hs_utmi_p3_clk" - Port 3 UTMI clock gate.
+ * "usb_host_hs_hsic480m_p1_clk" - Port 1 480MHz HSIC clock gate.
+ * "usb_host_hs_hsic480m_p2_clk" - Port 2 480MHz HSIC clock gate.
+ * "usb_host_hs_hsic480m_p3_clk" - Port 3 480MHz HSIC clock gate.
+ * "usb_host_hs_hsic60m_p1_clk" - Port 1 60MHz HSIC clock gate.
+ * "usb_host_hs_hsic60m_p2_clk" - Port 2 60MHz HSIC clock gate.
+ * "usb_host_hs_hsic60m_p3_clk" - Port 3 60MHz HSIC clock gate.
+
+Required properties if child node exists:
+
+- #address-cells: Must be 1
+- #size-cells: Must be 1
+- ranges: must be present
+
+Properties for children:
+
+The OMAP HS USB Host subsystem contains EHCI and OHCI controllers.
+See Documentation/devicetree/bindings/usb/omap-ehci.txt and
+omap3-ohci.txt
+
+Example for OMAP4:
+
+usbhshost: usbhshost@4a064000 {
+ compatible = "ti,usbhs-host";
+ reg = <0x4a064000 0x800>;
+ ti,hwmods = "usb_host_hs";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ usbhsohci: ohci@4a064800 {
+ compatible = "ti,ohci-omap3", "usb-ohci";
+ reg = <0x4a064800 0x400>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 76 0x4>;
+ };
+
+ usbhsehci: ehci@4a064c00 {
+ compatible = "ti,ehci-omap", "usb-ehci";
+ reg = <0x4a064c00 0x400>;
+ interrupt-parent = <&gic>;
+ interrupts = <0 77 0x4>;
+ };
+};
+
+&usbhshost {
+ port1-mode = "ehci-phy";
+ port2-mode = "ehci-tll";
+ port3-mode = "ehci-phy";
+};
+
+&usbhsehci {
+ phys = <&hsusb1_phy 0 &hsusb3_phy>;
+};