1 files changed, 0 insertions, 48 deletions
diff --git a/dts/Bindings/mfd/rn5t618.txt b/dts/Bindings/mfd/rn5t618.txt
deleted file mode 100644
index b74e5e94d1..0000000000
--- a/dts/Bindings/mfd/rn5t618.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-* Ricoh RN5T567/RN5T618 PMIC
-
-Ricoh RN5T567/RN5T618/RC5T619 is a power management IC family which
-integrates 3 to 5 step-down DCDC converters, 7 to 10 low-dropout regulators,
-GPIOs, and a watchdog timer. It can be controlled through an I2C interface.
-The RN5T618/RC5T619 provides additionally a Li-ion battery charger,
-fuel gauge, and an ADC.
-The RC5T619 additionnally includes USB charger detection and an RTC.
-
-Required properties:
- - compatible: must be one of
-		"ricoh,rn5t567"
-		"ricoh,rn5t618"
-		"ricoh,rc5t619"
- - reg: the I2C slave address of the device
-
-Optional properties:
- - system-power-controller:
-   See Documentation/devicetree/bindings/power/power-controller.txt
-
-Sub-nodes:
- - regulators: the node is required if the regulator functionality is
-   needed. The valid regulator names are: DCDC1, DCDC2, DCDC3, DCDC4
-   (RN5T567/RC5T619), LDO1, LDO2, LDO3, LDO4, LDO5, LDO6, LDO7, LDO8,
-   LDO9, LDO10, LDORTC1 and LDORTC2.
-   LDO7-10 are specific to RC5T619.
-   The common bindings for each individual regulator can be found in:
-   Documentation/devicetree/bindings/regulator/regulator.txt
-
-Example:
-
-	pmic@32 {
-		compatible = "ricoh,rn5t618";
-		reg = <0x32>;
-		system-power-controller;
-
-		regulators {
-			DCDC1 {
-				regulator-min-microvolt = <1050000>;
-				regulator-max-microvolt = <1050000>;
-			};
-
-			DCDC2 {
-				regulator-min-microvolt = <1175000>;
-				regulator-max-microvolt = <1175000>;
-			};
-		};
-	};