diff options
Diffstat (limited to 'dts/Bindings/mfd/x-powers,axp152.yaml')
| -rw-r--r-- | dts/Bindings/mfd/x-powers,axp152.yaml | 400 |
1 files changed, 400 insertions, 0 deletions
diff --git a/dts/Bindings/mfd/x-powers,axp152.yaml b/dts/Bindings/mfd/x-powers,axp152.yaml new file mode 100644 index 0000000000..3a53bae611 --- /dev/null +++ b/dts/Bindings/mfd/x-powers,axp152.yaml @@ -0,0 +1,400 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/x-powers,axp152.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: X-Powers AXP PMIC Device Tree Bindings + +maintainers: + - Chen-Yu Tsai <wens@csie.org> + +allOf: + - if: + properties: + compatible: + contains: + enum: + - x-powers,axp152 + - x-powers,axp202 + - x-powers,axp209 + + then: + properties: + regulators: + properties: + x-powers,dcdc-freq: + minimum: 750 + maximum: 1875 + default: 1500 + + else: + properties: + regulators: + properties: + x-powers,dcdc-freq: + minimum: 1800 + maximum: 4050 + default: 3000 + + - if: + properties: + compatible: + contains: + enum: + - x-powers,axp152 + - x-powers,axp202 + - x-powers,axp209 + + then: + not: + required: + - x-powers,drive-vbus-en + + - if: + not: + properties: + compatible: + contains: + const: x-powers,axp806 + + then: + allOf: + - not: + required: + - x-powers,self-working-mode + + - not: + required: + - x-powers,master-mode + + - if: + not: + properties: + compatible: + contains: + const: x-powers,axp305 + + then: + required: + - interrupts + +properties: + compatible: + oneOf: + - enum: + - x-powers,axp152 + - x-powers,axp202 + - x-powers,axp209 + - x-powers,axp221 + - x-powers,axp223 + - x-powers,axp803 + - x-powers,axp806 + - x-powers,axp809 + - x-powers,axp813 + - items: + - const: x-powers,axp805 + - const: x-powers,axp806 + - items: + - const: x-powers,axp305 + - const: x-powers,axp805 + - const: x-powers,axp806 + - items: + - const: x-powers,axp818 + - const: x-powers,axp813 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + x-powers,drive-vbus-en: + type: boolean + description: > + Set this when the N_VBUSEN pin is used as an output pin to control an + external regulator to drive the OTG VBus, rather then as an input pin + which signals whether the board is driving OTG VBus or not. + + x-powers,self-working-mode: + type: boolean + description: > + Set this when the PMIC is wired for self-working mode through the MODESET + pin. + + x-powers,master-mode: + type: boolean + description: > + Set this when the PMIC is wired for master mode through the MODESET pin. + + vin1-supply: + description: > + DCDC1 power supply node, if present. + + vin2-supply: + description: > + DCDC2 power supply node, if present. + + vin3-supply: + description: > + DCDC3 power supply node, if present. + + vin4-supply: + description: > + DCDC4 power supply node, if present. + + vin5-supply: + description: > + DCDC5 power supply node, if present. + + vin6-supply: + description: > + DCDC6 power supply node, if present. + + vin7-supply: + description: > + DCDC7 power supply node, if present. + + vina-supply: + description: > + DCDCA power supply node, if present. + + vinb-supply: + description: > + DCDCB power supply node, if present. + + vinc-supply: + description: > + DCDCC power supply node, if present. + + vind-supply: + description: > + DCDCD power supply node, if present. + + vine-supply: + description: > + DCDCE power supply node, if present. + + acin-supply: + description: > + LDO1 power supply node, if present. + + ldo24in-supply: + description: > + LDO2 and LDO4 power supply node, if present. + + ldo3in-supply: + description: > + LDO3 power supply node, if present. + + ldo5in-supply: + description: > + LDO5 power supply node, if present. + + aldoin-supply: + description: > + ALDO* power supply node, if present. + + bldoin-supply: + description: > + BLDO* power supply node, if present. + + cldoin-supply: + description: > + CLDO* power supply node, if present. + + dldoin-supply: + description: > + DLDO* power supply node, if present. + + eldoin-supply: + description: > + ELDO* power supply node, if present. + + fldoin-supply: + description: > + FLDO* power supply node, if present. + + ips-supply: + description: > + LDO_IO0, LDO_IO1 and RTC_LDO power supply node, if present. + + drivevbus-supply: + description: > + DRIVEVBUS power supply node, if present. + + swin-supply: + description: > + SW power supply node, if present. + + adc: + $ref: /schemas/iio/adc/x-powers,axp209-adc.yaml# + + gpio: + $ref: /schemas/gpio/x-powers,axp209-gpio.yaml# + + ac-power: + $ref: /schemas/power/supply/x-powers,axp20x-ac-power-supply.yaml# + + battery-power: + $ref: /schemas/power/supply/x-powers,axp20x-battery-power-supply.yaml# + + usb-power: + $ref: /schemas/power/supply/x-powers,axp20x-usb-power-supply.yaml# + + regulators: + type: object + + properties: + x-powers,dcdc-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + description: > + Defines the work frequency of DC-DC in kHz. + + patternProperties: + "^(([a-f])?ldo[0-9]|dcdc[0-7a-e]|ldo(_|-)io(0|1)|(dc1)?sw|rtc(_|-)ldo|drivevbus|dc5ldo)$": + $ref: /schemas/regulator/regulator.yaml# + type: object + + properties: + regulator-ramp-delay: + description: > + Only 800 and 1600 are valid for the DCDC2 and LDO3 regulators on + the AXP209. + + regulator-soft-start: + description: > + Only valid for the LDO3 regulator. + + x-powers,dcdc-workmode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + description: > + Only valid for DCDC regulators. Setup 1 for PWM mode, 0 + for AUTO (PWM/PFM) mode. The DCDC regulators work in a + mixed PWM/PFM mode, using PFM under light loads and + switching to PWM for heavier loads. Forcing PWM mode + trades efficiency under light loads for lower output + noise. This probably makes sense for HiFi audio related + applications that aren't battery constrained. + + additionalProperties: false + +required: + - compatible + - reg + - "#interrupt-cells" + - interrupt-controller + +additionalProperties: false + +examples: + - | + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + pmic@30 { + compatible = "x-powers,axp152"; + reg = <0x30>; + interrupts = <0>; + interrupt-controller; + #interrupt-cells = <1>; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c0 { + #address-cells = <1>; + #size-cells = <0>; + + pmic@34 { + compatible = "x-powers,axp209"; + reg = <0x34>; + interrupt-parent = <&nmi_intc>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + + ac_power_supply: ac-power { + compatible = "x-powers,axp202-ac-power-supply"; + }; + + axp_adc: adc { + compatible = "x-powers,axp209-adc"; + #io-channel-cells = <1>; + }; + + axp_gpio: gpio { + compatible = "x-powers,axp209-gpio"; + gpio-controller; + #gpio-cells = <2>; + + gpio0-adc-pin { + pins = "GPIO0"; + function = "adc"; + }; + }; + + battery_power_supply: battery-power { + compatible = "x-powers,axp209-battery-power-supply"; + }; + + regulators { + /* Default work frequency for buck regulators */ + x-powers,dcdc-freq = <1500>; + + reg_dcdc2: dcdc2 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1450000>; + regulator-name = "vdd-cpu"; + }; + + reg_dcdc3: dcdc3 { + regulator-always-on; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1400000>; + regulator-name = "vdd-int-dll"; + }; + + reg_ldo1: ldo1 { + /* LDO1 is a fixed output regulator */ + regulator-always-on; + regulator-min-microvolt = <1300000>; + regulator-max-microvolt = <1300000>; + regulator-name = "vdd-rtc"; + }; + + reg_ldo2: ldo2 { + regulator-always-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-name = "avcc"; + }; + + reg_ldo3: ldo3 { + regulator-name = "ldo3"; + }; + + reg_ldo4: ldo4 { + regulator-name = "ldo4"; + }; + + reg_ldo5: ldo5 { + regulator-name = "ldo5"; + }; + }; + + usb_power_supply: usb-power { + compatible = "x-powers,axp202-usb-power-supply"; + }; + }; + }; |