diff options
Diffstat (limited to 'dts/Bindings/mfd')
101 files changed, 4631 insertions, 1447 deletions
diff --git a/dts/Bindings/mfd/actions,atc260x.yaml b/dts/Bindings/mfd/actions,atc260x.yaml index dd43a0c766..6811246c57 100644 --- a/dts/Bindings/mfd/actions,atc260x.yaml +++ b/dts/Bindings/mfd/actions,atc260x.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mfd/actions,atc260x.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Actions Semi ATC260x Power Management IC bindings +title: Actions Semi ATC260x Power Management IC maintainers: - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> @@ -129,7 +129,7 @@ required: examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/Bindings/mfd/adi,max77541.yaml b/dts/Bindings/mfd/adi,max77541.yaml new file mode 100644 index 0000000000..c7895b2c38 --- /dev/null +++ b/dts/Bindings/mfd/adi,max77541.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/adi,max77541.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MAX77540/MAX77541 PMIC from ADI + +maintainers: + - Okan Sahin <okan.sahin@analog.com> + +description: | + MAX77540 is a Power Management IC with 2 buck regulators. + + MAX77541 is a Power Management IC with 2 buck regulators and 1 ADC. + +properties: + compatible: + enum: + - adi,max77540 + - adi,max77541 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + regulators: + $ref: /schemas/regulator/adi,max77541-regulator.yaml# + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@69 { + compatible = "adi,max77541"; + reg = <0x69>; + interrupt-parent = <&gpio>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + + regulators { + buck1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <5200000>; + regulator-boot-on; + regulator-always-on; + }; + buck2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <5200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + }; diff --git a/dts/Bindings/mfd/allwinner,sun4i-a10-ts.yaml b/dts/Bindings/mfd/allwinner,sun4i-a10-ts.yaml index f591332fc4..93f5065a62 100644 --- a/dts/Bindings/mfd/allwinner,sun4i-a10-ts.yaml +++ b/dts/Bindings/mfd/allwinner,sun4i-a10-ts.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mfd/allwinner,sun4i-a10-ts.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A10 Resistive Touchscreen Controller Device Tree Bindings +title: Allwinner A10 Resistive Touchscreen Controller maintainers: - Chen-Yu Tsai <wens@csie.org> diff --git a/dts/Bindings/mfd/allwinner,sun6i-a31-prcm.yaml b/dts/Bindings/mfd/allwinner,sun6i-a31-prcm.yaml index d131759cca..8789e3639f 100644 --- a/dts/Bindings/mfd/allwinner,sun6i-a31-prcm.yaml +++ b/dts/Bindings/mfd/allwinner,sun6i-a31-prcm.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mfd/allwinner,sun6i-a31-prcm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A31 PRCM Device Tree Bindings +title: Allwinner A31 PRCM maintainers: - Chen-Yu Tsai <wens@csie.org> @@ -22,6 +22,7 @@ properties: patternProperties: "^.*_(clk|rst)$": type: object + unevaluatedProperties: false properties: compatible: @@ -33,20 +34,51 @@ patternProperties: - allwinner,sun6i-a31-clock-reset - fixed-factor-clock + required: + - compatible + allOf: - if: properties: compatible: contains: - const: allwinner,sun6i-a31-apb0-clk + const: fixed-factor-clock + + then: + $ref: /schemas/clock/fixed-factor-clock.yaml# + + - if: + properties: + compatible: + contains: + const: allwinner,sun4i-a10-mod0-clk then: properties: "#clock-cells": const: 0 - # Already checked in the main schema - compatible: true + clocks: + maxItems: 2 + + clock-output-names: + maxItems: 1 + + required: + - "#clock-cells" + - clocks + - clock-output-names + + - if: + properties: + compatible: + contains: + const: allwinner,sun6i-a31-apb0-clk + + then: + properties: + "#clock-cells": + const: 0 clocks: maxItems: 1 @@ -54,16 +86,11 @@ patternProperties: clock-output-names: maxItems: 1 - phandle: true - required: - "#clock-cells" - - compatible - clocks - clock-output-names - additionalProperties: false - - if: properties: compatible: @@ -79,9 +106,6 @@ patternProperties: offset of the bit controlling this particular gate in the register. - # Already checked in the main schema - compatible: true - clocks: maxItems: 1 @@ -89,16 +113,11 @@ patternProperties: minItems: 1 maxItems: 32 - phandle: true - required: - "#clock-cells" - - compatible - clocks - clock-output-names - additionalProperties: false - - if: properties: compatible: @@ -110,9 +129,6 @@ patternProperties: "#clock-cells": const: 0 - # Already checked in the main schema - compatible: true - clocks: maxItems: 4 description: > @@ -122,16 +138,11 @@ patternProperties: clock-output-names: maxItems: 1 - phandle: true - required: - "#clock-cells" - - compatible - clocks - clock-output-names - additionalProperties: false - - if: properties: compatible: @@ -143,16 +154,8 @@ patternProperties: "#reset-cells": const: 1 - # Already checked in the main schema - compatible: true - - phandle: true - required: - "#reset-cells" - - compatible - - additionalProperties: false required: - compatible diff --git a/dts/Bindings/mfd/allwinner,sun8i-a23-prcm.yaml b/dts/Bindings/mfd/allwinner,sun8i-a23-prcm.yaml index aa5e683b23..e51f855199 100644 --- a/dts/Bindings/mfd/allwinner,sun8i-a23-prcm.yaml +++ b/dts/Bindings/mfd/allwinner,sun8i-a23-prcm.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mfd/allwinner,sun8i-a23-prcm.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Allwinner A23 PRCM Device Tree Bindings +title: Allwinner A23 PRCM maintainers: - Chen-Yu Tsai <wens@csie.org> @@ -22,6 +22,7 @@ properties: patternProperties: "^.*(clk|rst|codec).*$": type: object + unevaluatedProperties: false properties: compatible: @@ -40,6 +41,15 @@ patternProperties: properties: compatible: contains: + const: fixed-factor-clock + + then: + $ref: /schemas/clock/fixed-factor-clock.yaml# + + - if: + properties: + compatible: + contains: const: allwinner,sun8i-a23-apb0-clk then: @@ -47,25 +57,17 @@ patternProperties: "#clock-cells": const: 0 - # Already checked in the main schema - compatible: true - clocks: maxItems: 1 clock-output-names: maxItems: 1 - phandle: true - required: - "#clock-cells" - - compatible - clocks - clock-output-names - additionalProperties: false - - if: properties: compatible: @@ -81,9 +83,6 @@ patternProperties: offset of the bit controlling this particular gate in the register. - # Already checked in the main schema - compatible: true - clocks: maxItems: 1 @@ -91,16 +90,11 @@ patternProperties: minItems: 1 maxItems: 32 - phandle: true - required: - "#clock-cells" - - compatible - clocks - clock-output-names - additionalProperties: false - - if: properties: compatible: @@ -112,34 +106,8 @@ patternProperties: "#reset-cells": const: 1 - # Already checked in the main schema - compatible: true - - phandle: true - required: - "#reset-cells" - - compatible - - additionalProperties: false - - - if: - properties: - compatible: - contains: - const: allwinner,sun8i-a23-codec-analog - - then: - properties: - # Already checked in the main schema - compatible: true - - phandle: true - - required: - - compatible - - additionalProperties: false required: - compatible diff --git a/dts/Bindings/mfd/ampere,smpro.yaml b/dts/Bindings/mfd/ampere,smpro.yaml new file mode 100644 index 0000000000..c442c3cdff --- /dev/null +++ b/dts/Bindings/mfd/ampere,smpro.yaml @@ -0,0 +1,42 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ampere,smpro.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ampere Altra SMPro firmware driver + +maintainers: + - Quan Nguyen <quan@os.amperecomputing.com> + +description: | + Ampere Altra SMPro firmware may contain different blocks like hardware + monitoring, error monitoring and other miscellaneous features. + +properties: + compatible: + enum: + - ampere,smpro + + reg: + description: + I2C device address. + maxItems: 1 + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + smpro@4f { + compatible = "ampere,smpro"; + reg = <0x4f>; + }; + }; diff --git a/dts/Bindings/mfd/ams,as3711.yaml b/dts/Bindings/mfd/ams,as3711.yaml new file mode 100644 index 0000000000..ad8649cbb2 --- /dev/null +++ b/dts/Bindings/mfd/ams,as3711.yaml @@ -0,0 +1,223 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ams,as3711.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Austria MicroSystems AS3711 Quad Buck High Current PMIC with Charger + +maintainers: + - Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> + +description: + AS3711 is an I2C PMIC from Austria MicroSystems with multiple DC/DC and LDO + power supplies, a battery charger and an RTC. So far only bindings for the + two step-up DC/DC converters are defined. + +properties: + compatible: + const: ams,as3711 + + reg: + maxItems: 1 + + backlight: + description: + Step-up converter configuration, to be used as a backlight source + type: object + additionalProperties: false + properties: + compatible: + const: ams,as3711-bl + + su1-dev: + description: Framebuffer phandle for the first step-up converter + $ref: /schemas/types.yaml#/definitions/phandle + + su1-max-uA: + description: Maximum current for the first step-up converter + $ref: /schemas/types.yaml#/definitions/uint32 + + su2-dev: + description: Framebuffer phandle for the second step-up converter + $ref: /schemas/types.yaml#/definitions/phandle + + su2-max-uA: + description: Maximum current for the second step-up converter + $ref: /schemas/types.yaml#/definitions/uint32 + + su2-feedback-voltage: + description: Second step-up converter uses voltage feedback + type: boolean + + su2-feedback-curr1: + description: + Second step-up converter uses CURR1 input for current feedback + type: boolean + + su2-feedback-curr2: + description: + Second step-up converter uses CURR2 input for current feedback + type: boolean + + su2-feedback-curr3: + description: + Second step-up converter uses CURR3 input for current feedback + type: boolean + + su2-feedback-curr-auto: + description: + Second step-up converter uses automatic current feedback selection + type: boolean + + su2-fbprot-lx-sd4: + description: + Second step-up converter uses LX_SD4 for over-voltage protection + type: boolean + + su2-fbprot-gpio2: + description: + Second step-up converter uses GPIO2 for over-voltage protection + type: boolean + + su2-fbprot-gpio3: + description: + Second step-up converter uses GPIO3 for over-voltage protection + type: boolean + + su2-fbprot-gpio4: + description: + Second step-up converter uses GPIO4 for over-voltage protection + type: boolean + + su2-auto-curr1: + description: + Second step-up converter uses CURR1 input for automatic current + feedback + type: boolean + + su2-auto-curr2: + description: + Second step-up converter uses CURR2 input for automatic current + feedback + type: boolean + + su2-auto-curr3: + description: + Second step-up converter uses CURR3 input for automatic current + feedback + type: boolean + + required: + - compatible + + dependentRequired: + # To use the SU1 converter as a backlight source the following two + # properties must be provided: + su1-dev: [ su1-max-uA ] + su1-max-uA: [ su1-dev ] + + # To use the SU2 converter as a backlight source the following two + # properties must be provided: + su2-dev: [ su2-max-uA ] + su2-max-uA: [ su2-dev ] + + su2-feedback-voltage: [ su2-dev ] + su2-feedback-curr1: [ su2-dev ] + su2-feedback-curr2: [ su2-dev ] + su2-feedback-curr3: [ su2-dev ] + su2-feedback-curr-auto: [ su2-dev ] + su2-fbprot-lx-sd4: [ su2-dev ] + su2-fbprot-gpio2: [ su2-dev ] + su2-fbprot-gpio3: [ su2-dev ] + su2-fbprot-gpio4: [ su2-dev ] + su2-auto-curr1: [ su2-feedback-curr-auto ] + su2-auto-curr2: [ su2-feedback-curr-auto ] + su2-auto-curr3: [ su2-feedback-curr-auto ] + + dependentSchemas: + su2-dev: + allOf: + - oneOf: + - required: + - su2-feedback-voltage + - required: + - su2-feedback-curr1 + - required: + - su2-feedback-curr2 + - required: + - su2-feedback-curr3 + - required: + - su2-feedback-curr-auto + - oneOf: + - required: + - su2-fbprot-lx-sd4 + - required: + - su2-fbprot-gpio2 + - required: + - su2-fbprot-gpio3 + - required: + - su2-fbprot-gpio4 + + su2-feedback-curr-auto: + anyOf: + - required: + - su2-auto-curr1 + - required: + - su2-auto-curr2 + - required: + - su2-auto-curr3 + + regulators: + description: Other DC/DC and LDO supplies + type: object + unevaluatedProperties: false + patternProperties: + "^(sd[1-4]|ldo[1-8])$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@40 { + compatible = "ams,as3711"; + reg = <0x40>; + + regulators { + sd4 { + regulator-name = "1.215V"; + regulator-min-microvolt = <1215000>; + regulator-max-microvolt = <1235000>; + }; + ldo2 { + regulator-name = "2.8V CPU"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + }; + + backlight { + compatible = "ams,as3711-bl"; + su2-dev = <&lcdc>; + su2-max-uA = <36000>; + su2-feedback-curr-auto; + su2-fbprot-gpio4; + su2-auto-curr1; + su2-auto-curr2; + su2-auto-curr3; + }; + }; + }; diff --git a/dts/Bindings/mfd/arm,dev-platforms-syscon.yaml b/dts/Bindings/mfd/arm,dev-platforms-syscon.yaml new file mode 100644 index 0000000000..46b164ae08 --- /dev/null +++ b/dts/Bindings/mfd/arm,dev-platforms-syscon.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/arm,dev-platforms-syscon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm Ltd Developer Platforms System Controllers + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: + The Arm Ltd Integrator, Realview, and Versatile families of developer + platforms are contain various system controller blocks. Often these blocks + are part of a daughterboard or motherboard module. + +properties: + compatible: + oneOf: + - items: + - enum: + - arm,integrator-ap-syscon + - arm,integrator-cp-syscon + - arm,integrator-sp-syscon + - arm,im-pd1-syscon + - const: syscon + - items: + - enum: + - arm,core-module-integrator + - arm,integrator-ap-syscon + - arm,integrator-cp-syscon + - arm,integrator-sp-syscon + - arm,realview-eb-syscon + - arm,realview-pb1176-syscon + - arm,realview-pb11mp-syscon + - arm,realview-pba8-syscon + - arm,realview-pbx-syscon + - arm,versatile-ib2-syscon + - const: syscon + - const: simple-mfd + - items: + - enum: + - arm,realview-eb11mp-revb-syscon + - arm,realview-eb11mp-revc-syscon + - const: arm,realview-eb-syscon + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + ranges: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + +required: + - compatible + - reg + +additionalProperties: + type: object + +... diff --git a/dts/Bindings/mfd/as3711.txt b/dts/Bindings/mfd/as3711.txt deleted file mode 100644 index d98cf18c72..0000000000 --- a/dts/Bindings/mfd/as3711.txt +++ /dev/null @@ -1,73 +0,0 @@ -AS3711 is an I2C PMIC from Austria MicroSystems with multiple DCDC and LDO power -supplies, a battery charger and an RTC. So far only bindings for the two stepup -DCDC converters are defined. Other DCDC and LDO supplies are configured, using -standard regulator properties, they must belong to a sub-node, called -"regulators" and be called "sd1" to "sd4" and "ldo1" to "ldo8." Stepup converter -configuration should be placed in a subnode, called "backlight." - -Compulsory properties: -- compatible : must be "ams,as3711" -- reg : specifies the I2C address - -To use the SU1 converter as a backlight source the following two properties must -be provided: -- su1-dev : framebuffer phandle -- su1-max-uA : maximum current - -To use the SU2 converter as a backlight source the following two properties must -be provided: -- su2-dev : framebuffer phandle -- su1-max-uA : maximum current - -Additionally one of these properties must be provided to select the type of -feedback used: -- su2-feedback-voltage : voltage feedback is used -- su2-feedback-curr1 : CURR1 input used for current feedback -- su2-feedback-curr2 : CURR2 input used for current feedback -- su2-feedback-curr3 : CURR3 input used for current feedback -- su2-feedback-curr-auto: automatic current feedback selection - -and one of these to select the over-voltage protection pin -- su2-fbprot-lx-sd4 : LX_SD4 is used for over-voltage protection -- su2-fbprot-gpio2 : GPIO2 is used for over-voltage protection -- su2-fbprot-gpio3 : GPIO3 is used for over-voltage protection -- su2-fbprot-gpio4 : GPIO4 is used for over-voltage protection - -If "su2-feedback-curr-auto" is selected, one or more of the following properties -have to be specified: -- su2-auto-curr1 : use CURR1 input for current feedback -- su2-auto-curr2 : use CURR2 input for current feedback -- su2-auto-curr3 : use CURR3 input for current feedback - -Example: - -as3711@40 { - compatible = "ams,as3711"; - reg = <0x40>; - - regulators { - sd4 { - regulator-name = "1.215V"; - regulator-min-microvolt = <1215000>; - regulator-max-microvolt = <1235000>; - }; - ldo2 { - regulator-name = "2.8V CPU"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-boot-on; - }; - }; - - backlight { - compatible = "ams,as3711-bl"; - su2-dev = <&lcdc>; - su2-max-uA = <36000>; - su2-feedback-curr-auto; - su2-fbprot-gpio4; - su2-auto-curr1; - su2-auto-curr2; - su2-auto-curr3; - }; -}; diff --git a/dts/Bindings/mfd/aspeed,ast2x00-scu.yaml b/dts/Bindings/mfd/aspeed,ast2x00-scu.yaml new file mode 100644 index 0000000000..1689b986f4 --- /dev/null +++ b/dts/Bindings/mfd/aspeed,ast2x00-scu.yaml @@ -0,0 +1,110 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/aspeed,ast2x00-scu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Aspeed System Control Unit + +description: + The Aspeed System Control Unit manages the global behaviour of the SoC, + configuring elements such as clocks, pinmux, and reset. + +maintainers: + - Joel Stanley <joel@jms.id.au> + - Andrew Jeffery <andrew@aj.id.au> + +properties: + compatible: + items: + - enum: + - aspeed,ast2400-scu + - aspeed,ast2500-scu + - aspeed,ast2600-scu + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + ranges: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + + '#clock-cells': + const: 1 + + '#reset-cells': + const: 1 + +patternProperties: + '^p2a-control@[0-9a-f]+$': + description: See Documentation/devicetree/bindings/misc/aspeed-p2a-ctrl.txt + type: object + + '^pinctrl(@[0-9a-f]+)?$': + oneOf: + - $ref: /schemas/pinctrl/aspeed,ast2400-pinctrl.yaml + - $ref: /schemas/pinctrl/aspeed,ast2500-pinctrl.yaml + - $ref: /schemas/pinctrl/aspeed,ast2600-pinctrl.yaml + + '^interrupt-controller@[0-9a-f]+$': + description: See Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2xxx-scu-ic.txt + type: object + + '^silicon-id@[0-9a-f]+$': + description: Unique hardware silicon identifiers within the SoC + type: object + additionalProperties: false + + properties: + compatible: + items: + - enum: + - aspeed,ast2400-silicon-id + - aspeed,ast2500-silicon-id + - aspeed,ast2600-silicon-id + - const: aspeed,silicon-id + + reg: + description: + The reg should be the unique silicon id register, and not backwards + compatible one in eg. the 2600. + minItems: 1 + items: + - description: silicon id information registers + - description: unique chip id registers + +required: + - compatible + - reg + - ranges + - '#address-cells' + - '#size-cells' + - '#clock-cells' + - '#reset-cells' + +additionalProperties: false + +examples: + - | + syscon@1e6e2000 { + compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd"; + reg = <0x1e6e2000 0x1a8>; + #clock-cells = <1>; + #reset-cells = <1>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x1e6e2000 0x1000>; + + silicon-id@7c { + compatible = "aspeed,ast2500-silicon-id", "aspeed,silicon-id"; + reg = <0x7c 0x4>, <0x150 0x8>; + }; + }; +... diff --git a/dts/Bindings/mfd/aspeed-lpc.yaml b/dts/Bindings/mfd/aspeed-lpc.yaml index 750996d9a1..5dfe77aca1 100644 --- a/dts/Bindings/mfd/aspeed-lpc.yaml +++ b/dts/Bindings/mfd/aspeed-lpc.yaml @@ -27,7 +27,7 @@ description: as LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART management and bus snoop configuration. - * A set of SuperIO[3] scratch registers enableing implementation of e.g. custom + * A set of SuperIO[3] scratch registers enabling implementation of e.g. custom hardware management protocols for handover between the host and baseboard management controller. diff --git a/dts/Bindings/mfd/aspeed-scu.txt b/dts/Bindings/mfd/aspeed-scu.txt deleted file mode 100644 index 857ee33f73..0000000000 --- a/dts/Bindings/mfd/aspeed-scu.txt +++ /dev/null @@ -1,48 +0,0 @@ -The Aspeed System Control Unit manages the global behaviour of the SoC, -configuring elements such as clocks, pinmux, and reset. - -Required properties: -- compatible: One of: - "aspeed,ast2400-scu", "syscon", "simple-mfd" - "aspeed,ast2500-scu", "syscon", "simple-mfd" - -- reg: contains the offset and length of the SCU memory region -- #clock-cells: should be set to <1> - the system controller is also a - clock provider -- #reset-cells: should be set to <1> - the system controller is also a - reset line provider - -Example: - -syscon: syscon@1e6e2000 { - compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd"; - reg = <0x1e6e2000 0x1a8>; - #clock-cells = <1>; - #reset-cells = <1>; -}; - -Silicon ID ------------------ - -Families have unique hardware silicon identifiers within the SoC. - -Required properties: - - - compatible: "aspeed,silicon-id" or: - "aspeed,ast2400-silicon-id" or - "aspeed,ast2500-silicon-id" or - "aspeed,ast2600-silicon-id" - - - reg: offset and length of the silicon id information - optionally, a second offset and length describes the unique chip id - - The reg should be the unique silicon id register, and - not backwards compatible one in eg. the 2600. - -Example: - - -silicon-id@7c { - compatible = "aspeed,ast2500-silicon-id", "aspeed,silicon-id"; - reg = <0x7c 0x4 0x150 0x8>; -}; diff --git a/dts/Bindings/mfd/atmel,hlcdc.yaml b/dts/Bindings/mfd/atmel,hlcdc.yaml new file mode 100644 index 0000000000..4aa36903e7 --- /dev/null +++ b/dts/Bindings/mfd/atmel,hlcdc.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/atmel,hlcdc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Atmel's HLCD Controller + +maintainers: + - Nicolas Ferre <nicolas.ferre@microchip.com> + - Alexandre Belloni <alexandre.belloni@bootlin.com> + - Claudiu Beznea <claudiu.beznea@tuxon.dev> + +description: + The Atmel HLCDC (HLCD Controller) IP available on Atmel SoCs exposes two + subdevices, a PWM chip and a Display Controller. + +properties: + compatible: + enum: + - atmel,at91sam9n12-hlcdc + - atmel,at91sam9x5-hlcdc + - atmel,sama5d2-hlcdc + - atmel,sama5d3-hlcdc + - atmel,sama5d4-hlcdc + - microchip,sam9x60-hlcdc + - microchip,sam9x75-xlcdc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + minItems: 3 + + clock-names: + items: + - const: periph_clk + - const: sys_clk + - const: slow_clk + - const: lvds_pll_clk + minItems: 3 + + display-controller: + $ref: /schemas/display/atmel/atmel,hlcdc-display-controller.yaml + + pwm: + $ref: /schemas/pwm/atmel,hlcdc-pwm.yaml + +required: + - compatible + - reg + - clocks + - clock-names + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/at91.h> + #include <dt-bindings/dma/at91.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + lcd_controller: lcd-controller@f0030000 { + compatible = "atmel,sama5d3-hlcdc"; + reg = <0xf0030000 0x2000>; + clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; + clock-names = "periph_clk", "sys_clk", "slow_clk"; + interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; + + display-controller { + compatible = "atmel,hlcdc-display-controller"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + hlcdc_panel_output: endpoint@0 { + reg = <0>; + remote-endpoint = <&panel_input>; + }; + }; + }; + + pwm { + compatible = "atmel,hlcdc-pwm"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lcd_pwm>; + #pwm-cells = <3>; + }; + }; diff --git a/dts/Bindings/mfd/atmel,sama5d2-flexcom.yaml b/dts/Bindings/mfd/atmel,sama5d2-flexcom.yaml new file mode 100644 index 0000000000..0dc6a40b63 --- /dev/null +++ b/dts/Bindings/mfd/atmel,sama5d2-flexcom.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/atmel,sama5d2-flexcom.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Microchip Flexcom (Flexible Serial Communication Unit) + +maintainers: + - Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> + +description: + The Microchip Flexcom is just a wrapper which embeds a SPI controller, + an I2C controller and an USART. Only one function can be used at a + time and is chosen at boot time according to the device tree. + +properties: + compatible: + oneOf: + - const: atmel,sama5d2-flexcom + - items: + - const: microchip,sam9x7-flexcom + - const: atmel,sama5d2-flexcom + - items: + - const: microchip,sama7g5-flexcom + - const: atmel,sama5d2-flexcom + + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: + description: + One range for the full I/O register region. (including USART, + TWI and SPI registers). + items: + maxItems: 3 + + atmel,flexcom-mode: + description: | + Specifies the flexcom mode as follows: + 1: USART + 2: SPI + 3: I2C. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1, 2, 3] + +patternProperties: + "^serial@[0-9a-f]+$": + type: object + description: + Child node describing USART. See atmel-usart.txt for details + of USART bindings. + + "^spi@[0-9a-f]+$": + type: object + description: + Child node describing SPI. See ../spi/spi_atmel.txt for details + of SPI bindings. + + "^i2c@[0-9a-f]+$": + $ref: /schemas/i2c/atmel,at91sam-i2c.yaml + description: + Child node describing I2C. + +required: + - compatible + - reg + - clocks + - "#address-cells" + - "#size-cells" + - ranges + - atmel,flexcom-mode + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + flx0: flexcom@f8034000 { + compatible = "atmel,sama5d2-flexcom"; + reg = <0xf8034000 0x200>; + clocks = <&flx0_clk>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0xf8034000 0x800>; + atmel,flexcom-mode = <2>; + }; +... diff --git a/dts/Bindings/mfd/atmel-flexcom.txt b/dts/Bindings/mfd/atmel-flexcom.txt deleted file mode 100644 index 9d83753563..0000000000 --- a/dts/Bindings/mfd/atmel-flexcom.txt +++ /dev/null @@ -1,63 +0,0 @@ -* Device tree bindings for Atmel Flexcom (Flexible Serial Communication Unit) - -The Atmel Flexcom is just a wrapper which embeds a SPI controller, an I2C -controller and an USART. Only one function can be used at a time and is chosen -at boot time according to the device tree. - -Required properties: -- compatible: Should be "atmel,sama5d2-flexcom" -- reg: Should be the offset/length value for Flexcom dedicated - I/O registers (without USART, TWI or SPI registers). -- clocks: Should be the Flexcom peripheral clock from PMC. -- #address-cells: Should be <1> -- #size-cells: Should be <1> -- ranges: Should be one range for the full I/O register region - (including USART, TWI and SPI registers). -- atmel,flexcom-mode: Should be one of the following values: - - <1> for USART - - <2> for SPI - - <3> for I2C - -Required child: -A single available child device of type matching the "atmel,flexcom-mode" -property. - -The phandle provided by the clocks property of the child is the same as one for -the Flexcom parent. - -For other properties, please refer to the documentations of the respective -device: -- ../serial/atmel-usart.txt -- ../spi/spi_atmel.txt -- ../i2c/i2c-at91.txt - -Example: - -flexcom@f8034000 { - compatible = "atmel,sama5d2-flexcom"; - reg = <0xf8034000 0x200>; - clocks = <&flx0_clk>; - #address-cells = <1>; - #size-cells = <1>; - ranges = <0x0 0xf8034000 0x800>; - atmel,flexcom-mode = <2>; - - spi@400 { - compatible = "atmel,at91rm9200-spi"; - reg = <0x400 0x200>; - interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_flx0_default>; - #address-cells = <1>; - #size-cells = <0>; - clocks = <&flx0_clk>; - clock-names = "spi_clk"; - atmel,fifo-size = <32>; - - flash@0 { - compatible = "atmel,at25f512b"; - reg = <0>; - spi-max-frequency = <20000000>; - }; - }; -}; diff --git a/dts/Bindings/mfd/atmel-gpbr.txt b/dts/Bindings/mfd/atmel-gpbr.txt index e8c525569f..3c989d1760 100644 --- a/dts/Bindings/mfd/atmel-gpbr.txt +++ b/dts/Bindings/mfd/atmel-gpbr.txt @@ -6,6 +6,7 @@ Required properties: - compatible: Should be one of the following: "atmel,at91sam9260-gpbr", "syscon" "microchip,sam9x60-gpbr", "syscon" + "microchip,sam9x7-gpbr", "microchip,sam9x60-gpbr", "syscon" - reg: contains offset/length value of the GPBR memory region. diff --git a/dts/Bindings/mfd/atmel-hlcdc.txt b/dts/Bindings/mfd/atmel-hlcdc.txt deleted file mode 100644 index 5f8880cc75..0000000000 --- a/dts/Bindings/mfd/atmel-hlcdc.txt +++ /dev/null @@ -1,55 +0,0 @@ -Device-Tree bindings for Atmel's HLCDC (High LCD Controller) MFD driver - -Required properties: - - compatible: value should be one of the following: - "atmel,at91sam9n12-hlcdc" - "atmel,at91sam9x5-hlcdc" - "atmel,sama5d2-hlcdc" - "atmel,sama5d3-hlcdc" - "atmel,sama5d4-hlcdc" - "microchip,sam9x60-hlcdc" - - reg: base address and size of the HLCDC device registers. - - clock-names: the name of the 3 clocks requested by the HLCDC device. - Should contain "periph_clk", "sys_clk" and "slow_clk". - - clocks: should contain the 3 clocks requested by the HLCDC device. - - interrupts: should contain the description of the HLCDC interrupt line - -The HLCDC IP exposes two subdevices: - - a PWM chip: see ../pwm/atmel-hlcdc-pwm.txt - - a Display Controller: see ../display/atmel/hlcdc-dc.txt - -Example: - - hlcdc: hlcdc@f0030000 { - compatible = "atmel,sama5d3-hlcdc"; - reg = <0xf0030000 0x2000>; - clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>; - clock-names = "periph_clk","sys_clk", "slow_clk"; - interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>; - - hlcdc-display-controller { - compatible = "atmel,hlcdc-display-controller"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>; - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - hlcdc_panel_output: endpoint@0 { - reg = <0>; - remote-endpoint = <&panel_input>; - }; - }; - }; - - hlcdc_pwm: hlcdc-pwm { - compatible = "atmel,hlcdc-pwm"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_lcd_pwm>; - #pwm-cells = <3>; - }; - }; diff --git a/dts/Bindings/mfd/atmel-matrix.txt b/dts/Bindings/mfd/atmel-matrix.txt index 89d05c64fb..6e5f83614e 100644 --- a/dts/Bindings/mfd/atmel-matrix.txt +++ b/dts/Bindings/mfd/atmel-matrix.txt @@ -14,6 +14,7 @@ Required properties: "atmel,at91sam9x5-matrix", "syscon" "atmel,sama5d3-matrix", "syscon" "microchip,sam9x60-matrix", "syscon" + "microchip,sam9x7-matrix", "atmel,at91sam9x5-matrix", "syscon" - reg: Contains offset/length value of the Bus Matrix memory region. diff --git a/dts/Bindings/mfd/atmel-smc.txt b/dts/Bindings/mfd/atmel-smc.txt index 5696d9fcb5..fd62add38a 100644 --- a/dts/Bindings/mfd/atmel-smc.txt +++ b/dts/Bindings/mfd/atmel-smc.txt @@ -10,6 +10,7 @@ Required properties: "atmel,sama5d3-smc", "syscon" "atmel,sama5d2-smc", "syscon" "microchip,sam9x60-smc", "syscon" + "microchip,sam9x7-smc", "atmel,at91sam9260-smc", "syscon" - reg: Contains offset/length value of the SMC memory region. diff --git a/dts/Bindings/mfd/atmel-usart.txt b/dts/Bindings/mfd/atmel-usart.txt deleted file mode 100644 index a09133066a..0000000000 --- a/dts/Bindings/mfd/atmel-usart.txt +++ /dev/null @@ -1,98 +0,0 @@ -* Atmel Universal Synchronous Asynchronous Receiver/Transmitter (USART) - -Required properties for USART: -- compatible: Should be one of the following: - - "atmel,at91rm9200-usart" - - "atmel,at91sam9260-usart" - - "microchip,sam9x60-usart" - - "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart" - - "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart" - - "microchip,sam9x60-dbgu", "microchip,sam9x60-usart" -- reg: Should contain registers location and length -- interrupts: Should contain interrupt -- clock-names: tuple listing input clock names. - Required elements: "usart" -- clocks: phandles to input clocks. - -Required properties for USART in SPI mode: -- #size-cells : Must be <0> -- #address-cells : Must be <1> -- cs-gpios: chipselects (internal cs not supported) -- atmel,usart-mode : Must be <AT91_USART_MODE_SPI> (found in dt-bindings/mfd/at91-usart.h) - -Optional properties in serial and SPI mode: -- dma bindings for dma transfer: - - dmas: DMA specifier, consisting of a phandle to DMA controller node, - memory peripheral interface and USART DMA channel ID, FIFO configuration. - The order of DMA channels is fixed. The first DMA channel must be TX - associated channel and the second one must be RX associated channel. - Refer to dma.txt and atmel-dma.txt for details. - - dma-names: "tx" for TX channel. - "rx" for RX channel. - The order of dma-names is also fixed. The first name must be "tx" - and the second one must be "rx" as in the examples below. - -Optional properties in serial mode: -- atmel,use-dma-rx: use of PDC or DMA for receiving data -- atmel,use-dma-tx: use of PDC or DMA for transmitting data -- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD line respectively. - It will use specified PIO instead of the peripheral function pin for the USART feature. - If unsure, don't specify this property. -- atmel,fifo-size: maximum number of data the RX and TX FIFOs can store for FIFO - capable USARTs. -- rs485-rts-delay, rs485-rx-during-tx, linux,rs485-enabled-at-boot-time: see rs485.txt - -<chip> compatible description: -- at91rm9200: legacy USART support -- at91sam9260: generic USART implementation for SAM9 SoCs - -Example: -- use PDC: - usart0: serial@fff8c000 { - compatible = "atmel,at91sam9260-usart"; - reg = <0xfff8c000 0x4000>; - interrupts = <7>; - clocks = <&usart0_clk>; - clock-names = "usart"; - atmel,use-dma-rx; - atmel,use-dma-tx; - rts-gpios = <&pioD 15 GPIO_ACTIVE_LOW>; - cts-gpios = <&pioD 16 GPIO_ACTIVE_LOW>; - dtr-gpios = <&pioD 17 GPIO_ACTIVE_LOW>; - dsr-gpios = <&pioD 18 GPIO_ACTIVE_LOW>; - dcd-gpios = <&pioD 20 GPIO_ACTIVE_LOW>; - rng-gpios = <&pioD 19 GPIO_ACTIVE_LOW>; - }; - -- use DMA: - usart0: serial@f001c000 { - compatible = "atmel,at91sam9260-usart"; - reg = <0xf001c000 0x100>; - interrupts = <12 4 5>; - clocks = <&usart0_clk>; - clock-names = "usart"; - atmel,use-dma-rx; - atmel,use-dma-tx; - dmas = <&dma0 2 0x3>, - <&dma0 2 0x204>; - dma-names = "tx", "rx"; - atmel,fifo-size = <32>; - }; - -- SPI mode: - #include <dt-bindings/mfd/at91-usart.h> - - spi0: spi@f001c000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "atmel,at91rm9200-usart", "atmel,at91sam9260-usart"; - atmel,usart-mode = <AT91_USART_MODE_SPI>; - reg = <0xf001c000 0x100>; - interrupts = <12 IRQ_TYPE_LEVEL_HIGH 5>; - clocks = <&usart0_clk>; - clock-names = "usart"; - dmas = <&dma0 2 AT91_DMA_CFG_PER_ID(3)>, - <&dma0 2 (AT91_DMA_CFG_PER_ID(4) | AT91_DMA_CFG_FIFOCFG_ASAP)>; - dma-names = "tx", "rx"; - cs-gpios = <&pioB 3 0>; - }; diff --git a/dts/Bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml b/dts/Bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml index afc569bc15..cb480162f9 100644 --- a/dts/Bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml +++ b/dts/Bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mfd/brcm,bcm6318-gpio-sysctl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Broadcom BCM6318 GPIO System Controller Device Tree Bindings +title: Broadcom BCM6318 GPIO System Controller maintainers: - Álvaro Fernández Rojas <noltari@gmail.com> @@ -35,16 +35,16 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm6345-gpio.yaml" + $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in - Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. "^pinctrl@[0-9a-f]+$": # Child node type: object - $ref: "../pinctrl/brcm,bcm6318-pinctrl.yaml" + $ref: /schemas/pinctrl/brcm,bcm6318-pinctrl.yaml description: Pin controller for the SoC pins. This child node definition should follow the bindings specified in diff --git a/dts/Bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml b/dts/Bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml index c7771c86d7..9c2a04829d 100644 --- a/dts/Bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml +++ b/dts/Bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mfd/brcm,bcm63268-gpio-sysctl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Broadcom BCM63268 GPIO System Controller Device Tree Bindings +title: Broadcom BCM63268 GPIO System Controller maintainers: - Álvaro Fernández Rojas <noltari@gmail.com> @@ -35,16 +35,16 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm6345-gpio.yaml" + $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in - Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. "^pinctrl@[0-9a-f]+$": # Child node type: object - $ref: "../pinctrl/brcm,bcm63268-pinctrl.yaml" + $ref: /schemas/pinctrl/brcm,bcm63268-pinctrl.yaml description: Pin controller for the SoC pins. This child node definition should follow the bindings specified in @@ -148,47 +148,47 @@ examples: pinctrl_nand: nand-pins { function = "nand"; - group = "nand_grp"; + pins = "nand_grp"; }; pinctrl_gpio35_alt: gpio35_alt-pins { function = "gpio35_alt"; - pin = "gpio35"; + pins = "gpio35"; }; pinctrl_dectpd: dectpd-pins { function = "dectpd"; - group = "dectpd_grp"; + pins = "dectpd_grp"; }; pinctrl_vdsl_phy_override_0: vdsl_phy_override_0-pins { function = "vdsl_phy_override_0"; - group = "vdsl_phy_override_0_grp"; + pins = "vdsl_phy_override_0_grp"; }; pinctrl_vdsl_phy_override_1: vdsl_phy_override_1-pins { function = "vdsl_phy_override_1"; - group = "vdsl_phy_override_1_grp"; + pins = "vdsl_phy_override_1_grp"; }; pinctrl_vdsl_phy_override_2: vdsl_phy_override_2-pins { function = "vdsl_phy_override_2"; - group = "vdsl_phy_override_2_grp"; + pins = "vdsl_phy_override_2_grp"; }; pinctrl_vdsl_phy_override_3: vdsl_phy_override_3-pins { function = "vdsl_phy_override_3"; - group = "vdsl_phy_override_3_grp"; + pins = "vdsl_phy_override_3_grp"; }; pinctrl_dsl_gpio8: dsl_gpio8-pins { function = "dsl_gpio8"; - group = "dsl_gpio8"; + pins = "dsl_gpio8"; }; pinctrl_dsl_gpio9: dsl_gpio9-pins { function = "dsl_gpio9"; - group = "dsl_gpio9"; + pins = "dsl_gpio9"; }; }; }; diff --git a/dts/Bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml b/dts/Bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml index 33963c11ae..5f48209ed4 100644 --- a/dts/Bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml +++ b/dts/Bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mfd/brcm,bcm6328-gpio-sysctl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Broadcom BCM6328 GPIO System Controller Device Tree Bindings +title: Broadcom BCM6328 GPIO System Controller maintainers: - Álvaro Fernández Rojas <noltari@gmail.com> @@ -35,16 +35,16 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm6345-gpio.yaml" + $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in - Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. "^pinctrl@[0-9a-f]+$": # Child node type: object - $ref: "../pinctrl/brcm,bcm6328-pinctrl.yaml" + $ref: /schemas/pinctrl/brcm,bcm6328-pinctrl.yaml description: Pin controller for the SoC pins. This child node definition should follow the bindings specified in diff --git a/dts/Bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml b/dts/Bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml index 3e44bea78b..f1f4629565 100644 --- a/dts/Bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml +++ b/dts/Bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mfd/brcm,bcm6358-gpio-sysctl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Broadcom BCM6358 GPIO System Controller Device Tree Bindings +title: Broadcom BCM6358 GPIO System Controller maintainers: - Álvaro Fernández Rojas <noltari@gmail.com> @@ -35,16 +35,16 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm6345-gpio.yaml" + $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in - Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. "^pinctrl@[0-9a-f]+$": # Child node type: object - $ref: "../pinctrl/brcm,bcm6358-pinctrl.yaml" + $ref: /schemas/pinctrl/brcm,bcm6358-pinctrl.yaml description: Pin controller for the SoC pins. This child node definition should follow the bindings specified in diff --git a/dts/Bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml b/dts/Bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml index 48d14a5fe0..c2941638c8 100644 --- a/dts/Bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml +++ b/dts/Bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mfd/brcm,bcm6362-gpio-sysctl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Broadcom BCM6362 GPIO System Controller Device Tree Bindings +title: Broadcom BCM6362 GPIO System Controller maintainers: - Álvaro Fernández Rojas <noltari@gmail.com> @@ -35,16 +35,16 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm6345-gpio.yaml" + $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in - Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. "^pinctrl@[0-9a-f]+$": # Child node type: object - $ref: "../pinctrl/brcm,bcm6362-pinctrl.yaml" + $ref: /schemas/pinctrl/brcm,bcm6362-pinctrl.yaml description: Pin controller for the SoC pins. This child node definition should follow the bindings specified in @@ -230,7 +230,7 @@ examples: pinctrl_nand: nand-pins { function = "nand"; - group = "nand_grp"; + pins = "nand_grp"; }; }; }; diff --git a/dts/Bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml b/dts/Bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml index 307270b0cf..44e77d77d3 100644 --- a/dts/Bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml +++ b/dts/Bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mfd/brcm,bcm6368-gpio-sysctl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Broadcom BCM6368 GPIO System Controller Device Tree Bindings +title: Broadcom BCM6368 GPIO System Controller maintainers: - Álvaro Fernández Rojas <noltari@gmail.com> @@ -35,16 +35,16 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm6345-gpio.yaml" + $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in - Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. "^pinctrl@[0-9a-f]+$": # Child node type: object - $ref: "../pinctrl/brcm,bcm6368-pinctrl.yaml" + $ref: /schemas/pinctrl/brcm,bcm6368-pinctrl.yaml description: Pin controller for the SoC pins. This child node definition should follow the bindings specified in @@ -240,7 +240,7 @@ examples: pinctrl_uart1: uart1-pins { function = "uart1"; - group = "uart1_grp"; + pins = "uart1_grp"; }; }; }; diff --git a/dts/Bindings/mfd/brcm,twd.yaml b/dts/Bindings/mfd/brcm,twd.yaml index 634526f790..e5136a37b0 100644 --- a/dts/Bindings/mfd/brcm,twd.yaml +++ b/dts/Bindings/mfd/brcm,twd.yaml @@ -36,6 +36,9 @@ properties: const: 1 patternProperties: + '^timer@[a-f0-9]+$': + $ref: /schemas/timer/brcm,bcmbca-timer.yaml + '^watchdog@[a-f0-9]+$': $ref: /schemas/watchdog/brcm,bcm7038-wdt.yaml @@ -54,6 +57,11 @@ examples: #address-cells = <1>; #size-cells = <1>; + timer@0 { + compatible = "brcm,bcm63138-timer"; + reg = <0x0 0x28>; + }; + watchdog@28 { compatible = "brcm,bcm7038-wdt"; reg = <0x28 0x8>; diff --git a/dts/Bindings/mfd/canaan,k210-sysctl.yaml b/dts/Bindings/mfd/canaan,k210-sysctl.yaml index c24ad45cab..3b3beab9db 100644 --- a/dts/Bindings/mfd/canaan,k210-sysctl.yaml +++ b/dts/Bindings/mfd/canaan,k210-sysctl.yaml @@ -4,10 +4,10 @@ $id: http://devicetree.org/schemas/mfd/canaan,k210-sysctl.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Canaan Kendryte K210 System Controller Device Tree Bindings +title: Canaan Kendryte K210 System Controller maintainers: - - Damien Le Moal <damien.lemoal@wdc.com> + - Damien Le Moal <dlemoal@kernel.org> description: Canaan Inc. Kendryte K210 SoC system controller which provides a @@ -36,7 +36,7 @@ properties: clock-controller: # Child node type: object - $ref: "../clock/canaan,k210-clk.yaml" + $ref: ../clock/canaan,k210-clk.yaml description: Clock controller for the SoC clocks. This child node definition should follow the bindings specified in @@ -45,7 +45,7 @@ properties: reset-controller: # Child node type: object - $ref: "../reset/canaan,k210-rst.yaml" + $ref: ../reset/canaan,k210-rst.yaml description: Reset controller for the SoC. This child node definition should follow the bindings specified in @@ -54,7 +54,7 @@ properties: syscon-reboot: # Child node type: object - $ref: "../power/reset/syscon-reboot.yaml" + $ref: ../power/reset/syscon-reboot.yaml description: Reboot method for the SoC. This child node definition should follow the bindings specified in diff --git a/dts/Bindings/mfd/cirrus,lochnagar.yaml b/dts/Bindings/mfd/cirrus,lochnagar.yaml index ad285cb480..ebbedabb2b 100644 --- a/dts/Bindings/mfd/cirrus,lochnagar.yaml +++ b/dts/Bindings/mfd/cirrus,lochnagar.yaml @@ -144,6 +144,7 @@ properties: CODECs digital core if not being provided by an internal regulator. type: object $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false properties: compatible: enum: @@ -161,6 +162,7 @@ properties: CODECs MICVDD. type: object $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false properties: compatible: enum: @@ -177,6 +179,7 @@ properties: Initialisation data for the MIC1VDD supplies. type: object $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false properties: compatible: enum: @@ -202,6 +205,7 @@ properties: Initialisation data for the MIC2VDD supplies. type: object $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false properties: compatible: enum: @@ -228,6 +232,7 @@ properties: the CODECs analog and 1.8V digital supplies. type: object $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false properties: compatible: enum: @@ -261,7 +266,7 @@ additionalProperties: false examples: - | - #include <dt-bindings/clk/lochnagar.h> + #include <dt-bindings/clock/lochnagar.h> #include <dt-bindings/pinctrl/lochnagar.h> i2c@e0004000 { #address-cells = <1>; diff --git a/dts/Bindings/mfd/da9062.txt b/dts/Bindings/mfd/da9062.txt deleted file mode 100644 index bab0d0e66c..0000000000 --- a/dts/Bindings/mfd/da9062.txt +++ /dev/null @@ -1,123 +0,0 @@ -* Dialog DA9062 Power Management Integrated Circuit (PMIC) - -Product information for the DA9062 and DA9061 devices can be found here: -- https://www.dialog-semiconductor.com/products/da9062 -- https://www.dialog-semiconductor.com/products/da9061 - -The DA9062 PMIC consists of: - -Device Supply Names Description ------- ------------ ----------- -da9062-regulator : : LDOs & BUCKs -da9062-rtc : : Real-Time Clock -da9062-onkey : : On Key -da9062-watchdog : : Watchdog Timer -da9062-thermal : : Thermal -da9062-gpio : : GPIOs - -The DA9061 PMIC consists of: - -Device Supply Names Description ------- ------------ ----------- -da9062-regulator : : LDOs & BUCKs -da9062-onkey : : On Key -da9062-watchdog : : Watchdog Timer -da9062-thermal : : Thermal - -====== - -Required properties: - -- compatible : Should be - "dlg,da9062" for DA9062 - "dlg,da9061" for DA9061 -- reg : Specifies the I2C slave address (this defaults to 0x58 but it can be - modified to match the chip's OTP settings). -- interrupts : IRQ line information. -- interrupt-controller - -See Documentation/devicetree/bindings/interrupt-controller/interrupts.txt for -further information on IRQ bindings. - -Optional properties: - -- gpio-controller : Marks the device as a gpio controller. -- #gpio-cells : Should be two. The first cell is the pin number and the - second cell is used to specify the gpio polarity. - -See Documentation/devicetree/bindings/gpio/gpio.txt for further information on -GPIO bindings. - -Sub-nodes: - -- regulators : This node defines the settings for the LDOs and BUCKs. - The DA9062 regulators are bound using their names listed below: - - buck1 : BUCK_1 - buck2 : BUCK_2 - buck3 : BUCK_3 - buck4 : BUCK_4 - ldo1 : LDO_1 - ldo2 : LDO_2 - ldo3 : LDO_3 - ldo4 : LDO_4 - - The DA9061 regulators are bound using their names listed below: - - buck1 : BUCK_1 - buck2 : BUCK_2 - buck3 : BUCK_3 - ldo1 : LDO_1 - ldo2 : LDO_2 - ldo3 : LDO_3 - ldo4 : LDO_4 - - The component follows the standard regulator framework and the bindings - details of individual regulator device can be found in: - Documentation/devicetree/bindings/regulator/regulator.txt - - regulator-initial-mode may be specified for buck regulators using mode values - from include/dt-bindings/regulator/dlg,da9063-regulator.h. - -- rtc : This node defines settings required for the Real-Time Clock associated - with the DA9062. There are currently no entries in this binding, however - compatible = "dlg,da9062-rtc" should be added if a node is created. - -- onkey : See ../input/da9062-onkey.txt - -- watchdog: See ../watchdog/da9062-watchdog.txt - -- thermal : See ../thermal/da9062-thermal.txt - -Example: - - pmic0: da9062@58 { - compatible = "dlg,da9062"; - reg = <0x58>; - interrupt-parent = <&gpio6>; - interrupts = <11 IRQ_TYPE_LEVEL_LOW>; - interrupt-controller; - - rtc { - compatible = "dlg,da9062-rtc"; - }; - - regulators { - DA9062_BUCK1: buck1 { - regulator-name = "BUCK1"; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <1570000>; - regulator-min-microamp = <500000>; - regulator-max-microamp = <2000000>; - regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; - regulator-boot-on; - }; - DA9062_LDO1: ldo1 { - regulator-name = "LDO_1"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <3600000>; - regulator-boot-on; - }; - }; - }; - diff --git a/dts/Bindings/mfd/dlg,da9063.yaml b/dts/Bindings/mfd/dlg,da9063.yaml index d71933460e..51612dc227 100644 --- a/dts/Bindings/mfd/dlg,da9063.yaml +++ b/dts/Bindings/mfd/dlg,da9063.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mfd/dlg,da9063.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Dialog DA9063/DA9063L Power Management Integrated Circuit (PMIC) +title: Dialog DA906{3L,3,2,1} Power Management Integrated Circuit (PMIC) maintainers: - Steve Twiss <stwiss.opensource@diasemi.com> @@ -12,10 +12,22 @@ maintainers: description: | For device-tree bindings of other sub-modules refer to the binding documents under the respective sub-system directories. + Using regulator-{uv,ov}-{warn,error,protection}-microvolt requires special + handling: First, when GP_FB2 is used, it must be ensured that there is no + moment where all voltage monitors are disabled. Next, as da9063 only supports + UV *and* OV monitoring, both must be set to the same severity and value + (0: disable, 1: enable). + Product information for the DA906{3L,3,2,1} devices can be found here: + - https://www.dialog-semiconductor.com/products/da9063l + - https://www.dialog-semiconductor.com/products/da9063 + - https://www.dialog-semiconductor.com/products/da9062 + - https://www.dialog-semiconductor.com/products/da9061 properties: compatible: enum: + - dlg,da9061 + - dlg,da9062 - dlg,da9063 - dlg,da9063l @@ -30,20 +42,28 @@ properties: "#interrupt-cells": const: 2 - dlg,use-sw-pm: - type: boolean - description: - Disable the watchdog during suspend. - Only use this option if you can't use the watchdog automatic suspend - function during a suspend (see register CONTROL_B). + gpio-controller: true - watchdog: + "#gpio-cells": + const: 2 + + gpio: type: object - $ref: /schemas/watchdog/watchdog.yaml# - unevaluatedProperties: false + additionalProperties: false properties: compatible: - const: dlg,da9063-watchdog + const: dlg,da9062-gpio + + onkey: + $ref: /schemas/input/dlg,da9062-onkey.yaml + + regulators: + type: object + additionalProperties: false + patternProperties: + "^(ldo([1-9]|1[01])|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged|buck[1-4])$": + $ref: /schemas/regulator/regulator.yaml + unevaluatedProperties: false rtc: type: object @@ -51,36 +71,86 @@ properties: unevaluatedProperties: false properties: compatible: - const: dlg,da9063-rtc + enum: + - dlg,da9062-rtc + - dlg,da9063-rtc - onkey: - type: object - $ref: /schemas/input/input.yaml# - unevaluatedProperties: false - properties: - compatible: - const: dlg,da9063-onkey + thermal: + $ref: /schemas/thermal/dlg,da9062-thermal.yaml - dlg,disable-key-power: - type: boolean - description: | - Disable power-down using a long key-press. - If this entry does not exist then by default the key-press triggered - power down is enabled and the OnKey will support both KEY_POWER and - KEY_SLEEP. + watchdog: + $ref: /schemas/watchdog/dlg,da9062-watchdog.yaml - regulators: +patternProperties: + "^(.+-hog(-[0-9]+)?)$": type: object - patternProperties: - "^(ldo[1-11]|bcore[1-2]|bpro|bmem|bio|bperi)$": - $ref: /schemas/regulator/regulator.yaml - unevaluatedProperties: false + + required: + - gpio-hog required: - compatible - reg - - interrupts - - interrupt-controller + +allOf: + - if: + properties: + compatible: + contains: + enum: + - dlg,da9063 + - dlg,da9063l + then: + properties: + gpio-controller: false + "#gpio-cells": false + gpio: false + regulators: + patternProperties: + "^buck[1-4]$": false + thermal: false + required: + - interrupts + - interrupt-controller + - '#interrupt-cells' + + - if: + properties: + compatible: + contains: + enum: + - dlg,da9062 + then: + properties: + regulators: + patternProperties: + "^(ldo([5-9]|10|11)|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged)$": false + required: + - gpio + - onkey + - rtc + - thermal + - watchdog + + - if: + properties: + compatible: + contains: + enum: + - dlg,da9061 + then: + properties: + gpio-controller: false + "#gpio-cells": false + gpio: false + regulators: + patternProperties: + "^(ldo([5-9]|10|11)|bcore([1-2]|s-merged)|b(pro|mem|io|peri)|bmem-bio-merged|buck4)$": false + rtc: false + required: + - onkey + - thermal + - watchdog additionalProperties: false @@ -93,10 +163,10 @@ examples: pmic@58 { compatible = "dlg,da9063"; reg = <0x58>; - #interrupt-cells = <2>; interrupt-parent = <&gpio6>; interrupts = <11 IRQ_TYPE_LEVEL_LOW>; interrupt-controller; + #interrupt-cells = <2>; rtc { compatible = "dlg,da9063-rtc"; @@ -112,7 +182,7 @@ examples: }; regulators { - regulator-bcore1 { + bcore1 { regulator-name = "BCORE1"; regulator-min-microvolt = <300000>; regulator-max-microvolt = <1570000>; @@ -120,12 +190,137 @@ examples: regulator-max-microamp = <2000000>; regulator-boot-on; }; - regulator-ldo11 { + ldo6 { + /* UNUSED */ + regulator-name = "LDO_6"; + regulator-uv-protection-microvolt = <0>; + regulator-ov-protection-microvolt = <0>; + }; + ldo11 { regulator-name = "LDO_11"; regulator-min-microvolt = <900000>; - regulator-max-microvolt = <3600000>; - regulator-boot-on; + regulator-max-microvolt = <900000>; + regulator-uv-protection-microvolt = <1>; + regulator-ov-protection-microvolt = <1>; + regulator-always-on; + }; + }; + }; + }; + + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/regulator/dlg,da9063-regulator.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + pmic@58 { + compatible = "dlg,da9062"; + reg = <0x58>; + gpio-controller; + #gpio-cells = <2>; + + sd0-pwr-sel-hog { + gpio-hog; + gpios = <1 0>; + input; + line-name = "SD0_PWR_SEL"; + }; + + sd1-pwr-sel-hog { + gpio-hog; + gpios = <2 0>; + input; + line-name = "SD1_PWR_SEL"; + }; + + sw-et0-en-hog { + gpio-hog; + gpios = <3 0>; + input; + line-name = "SW_ET0_EN#"; + }; + + pmic-good-hog { + gpio-hog; + gpios = <4 0>; + output-high; + line-name = "PMIC_PGOOD"; + }; + + gpio { + compatible = "dlg,da9062-gpio"; + }; + + onkey { + compatible = "dlg,da9062-onkey"; + }; + + regulators { + buck1 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <1380000>; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; + regulator-always-on; + }; + buck2 { + regulator-name = "vdd_soc"; + regulator-min-microvolt = <1150000>; + regulator-max-microvolt = <1380000>; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; + regulator-always-on; + }; + buck3 { + regulator-name = "vdd_ddr3"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; + regulator-always-on; + }; + buck4 { + regulator-name = "vdd_eth"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-initial-mode = <DA9063_BUCK_MODE_SYNC>; + regulator-always-on; + }; + ldo1 { + regulator-name = "vdd_snvs"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + ldo2 { + regulator-name = "vdd_high"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + ldo3 { + regulator-name = "vdd_eth_io"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; }; + ldo4 { + regulator-name = "vdd_emmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + }; + + rtc { + compatible = "dlg,da9062-rtc"; + }; + + thermal { + compatible = "dlg,da9062-thermal"; + }; + + watchdog { + compatible = "dlg,da9062-watchdog"; + dlg,use-sw-pm; }; }; }; diff --git a/dts/Bindings/mfd/ene-kb3930.yaml b/dts/Bindings/mfd/ene-kb3930.yaml index 08af356f5d..9b11b6e2bb 100644 --- a/dts/Bindings/mfd/ene-kb3930.yaml +++ b/dts/Bindings/mfd/ene-kb3930.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mfd/ene-kb3930.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: ENE KB3930 Embedded Controller bindings +title: ENE KB3930 Embedded Controller description: | This binding describes the ENE KB3930 Embedded Controller attached to an diff --git a/dts/Bindings/mfd/ene-kb930.yaml b/dts/Bindings/mfd/ene-kb930.yaml index 06ed9ec8f4..02c111def5 100644 --- a/dts/Bindings/mfd/ene-kb930.yaml +++ b/dts/Bindings/mfd/ene-kb930.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mfd/ene-kb930.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: ENE KB930 Embedded Controller bindings +title: ENE KB930 Embedded Controller description: | This binding describes the ENE KB930 Embedded Controller attached to an @@ -13,6 +13,8 @@ description: | maintainers: - Dmitry Osipenko <digetx@gmail.com> +$ref: /schemas/power/supply/power-supply.yaml + properties: compatible: items: @@ -22,15 +24,13 @@ properties: reg: maxItems: 1 - monitored-battery: true - power-supplies: true system-power-controller: true required: - compatible - reg -additionalProperties: false +unevaluatedProperties: false examples: - | diff --git a/dts/Bindings/mfd/fsl,imx8qxp-csr.yaml b/dts/Bindings/mfd/fsl,imx8qxp-csr.yaml index f09577105b..20067002cc 100644 --- a/dts/Bindings/mfd/fsl,imx8qxp-csr.yaml +++ b/dts/Bindings/mfd/fsl,imx8qxp-csr.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mfd/fsl,imx8qxp-csr.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Freescale i.MX8qm/qxp Control and Status Registers Module Bindings +title: Freescale i.MX8qm/qxp Control and Status Registers Module maintainers: - Liu Ying <victor.liu@nxp.com> diff --git a/dts/Bindings/mfd/gateworks-gsc.yaml b/dts/Bindings/mfd/gateworks-gsc.yaml index 5e0fe3ebe1..dc379f3ebf 100644 --- a/dts/Bindings/mfd/gateworks-gsc.yaml +++ b/dts/Bindings/mfd/gateworks-gsc.yaml @@ -46,6 +46,7 @@ properties: adc: type: object + additionalProperties: false description: Optional hardware monitoring module properties: @@ -59,8 +60,9 @@ properties: const: 0 patternProperties: - "^channel@[0-9]+$": + "^channel@[0-9a-f]+$": type: object + additionalProperties: false description: | Properties for a single ADC which can report cooked values (i.e. temperature sensor based on thermister), raw values @@ -113,18 +115,13 @@ properties: patternProperties: "^fan-controller@[0-9a-f]+$": type: object + additionalProperties: false description: Optional fan controller properties: compatible: const: gw,gsc-fan - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - reg: description: The fan controller base address maxItems: 1 @@ -132,8 +129,6 @@ patternProperties: required: - compatible - reg - - "#address-cells" - - "#size-cells" required: - compatible @@ -191,8 +186,6 @@ examples: }; fan-controller@2c { - #address-cells = <1>; - #size-cells = <0>; compatible = "gw,gsc-fan"; reg = <0x2c>; }; diff --git a/dts/Bindings/mfd/google,cros-ec.yaml b/dts/Bindings/mfd/google,cros-ec.yaml index 04962bb295..aac8819bd0 100644 --- a/dts/Bindings/mfd/google,cros-ec.yaml +++ b/dts/Bindings/mfd/google,cros-ec.yaml @@ -20,19 +20,24 @@ properties: compatible: oneOf: - description: - For implementations of the EC is connected through I2C. + For implementations of the EC connected through I2C. const: google,cros-ec-i2c - description: - For implementations of the EC is connected through SPI. + For implementations of the EC connected through SPI. const: google,cros-ec-spi - description: - For implementations of the EC is connected through RPMSG. + For implementations of the FPMCU connected through SPI. + items: + - const: google,cros-ec-fp + - const: google,cros-ec-spi + - description: + For implementations of the EC connected through RPMSG. const: google,cros-ec-rpmsg + - description: + For implementations of the EC connected through UART. + const: google,cros-ec-uart - controller-data: - description: - SPI controller data, see bindings/spi/samsung,spi-peripheral-props.yaml - type: object + controller-data: true google,cros-ec-spi-pre-delay: description: @@ -60,10 +65,9 @@ properties: ARM Cortex M4 Co-processor. Contains the name of the rpmsg device. Used to match the subnode to the rpmsg device announced by the SCP. - $ref: "/schemas/types.yaml#/definitions/string" + $ref: /schemas/types.yaml#/definitions/string - spi-max-frequency: - description: Maximum SPI frequency of the device in Hz. + spi-max-frequency: true reg: maxItems: 1 @@ -71,6 +75,15 @@ properties: interrupts: maxItems: 1 + reset-gpios: + maxItems: 1 + + boot0-gpios: + maxItems: 1 + description: Assert for bootloader mode. + + vdd-supply: true + wakeup-source: description: Button can wake-up the system. @@ -80,24 +93,29 @@ properties: '#size-cells': const: 0 + '#gpio-cells': + const: 2 + + gpio-controller: true + typec: - $ref: "/schemas/chrome/google,cros-ec-typec.yaml#" + $ref: /schemas/chrome/google,cros-ec-typec.yaml# ec-pwm: - $ref: "/schemas/pwm/google,cros-ec-pwm.yaml#" + $ref: /schemas/pwm/google,cros-ec-pwm.yaml# deprecated: true pwm: - $ref: "/schemas/pwm/google,cros-ec-pwm.yaml#" + $ref: /schemas/pwm/google,cros-ec-pwm.yaml# kbd-led-backlight: - $ref: "/schemas/chrome/google,cros-kbd-led-backlight.yaml#" + $ref: /schemas/chrome/google,cros-kbd-led-backlight.yaml# keyboard-controller: - $ref: "/schemas/input/google,cros-ec-keyb.yaml#" + $ref: /schemas/input/google,cros-ec-keyb.yaml# proximity: - $ref: "/schemas/iio/proximity/google,cros-ec-mkbp-proximity.yaml#" + $ref: /schemas/iio/proximity/google,cros-ec-mkbp-proximity.yaml# codecs: type: object @@ -113,7 +131,7 @@ properties: patternProperties: "^ec-codec@[a-f0-9]+$": type: object - $ref: "/schemas/sound/google,cros-ec-codec.yaml#" + $ref: /schemas/sound/google,cros-ec-codec.yaml# required: - "#address-cells" @@ -138,15 +156,15 @@ properties: patternProperties: "^i2c-tunnel[0-9]*$": type: object - $ref: "/schemas/i2c/google,cros-ec-i2c-tunnel.yaml#" + $ref: /schemas/i2c/google,cros-ec-i2c-tunnel.yaml# "^regulator@[0-9]+$": type: object - $ref: "/schemas/regulator/google,cros-ec-regulator.yaml#" + $ref: /schemas/regulator/google,cros-ec-regulator.yaml# "^extcon[0-9]*$": type: object - $ref: "/schemas/extcon/extcon-usbc-cros-ec.yaml#" + $ref: /schemas/extcon/extcon-usbc-cros-ec.yaml# required: - compatible @@ -155,18 +173,76 @@ allOf: - if: properties: compatible: - contains: - enum: - - google,cros-ec-i2c - - google,cros-ec-rpmsg + not: + contains: + const: google,cros-ec-spi then: properties: + controller-data: false google,cros-ec-spi-pre-delay: false google,cros-ec-spi-msg-delay: false spi-max-frequency: false else: $ref: /schemas/spi/spi-peripheral-props.yaml + - if: + properties: + compatible: + not: + contains: + const: google,cros-ec-rpmsg + then: + properties: + mediatek,rpmsg-name: false + + - if: + properties: + compatible: + not: + contains: + enum: + - google,cros-ec-rpmsg + - google,cros-ec-uart + then: + required: + - reg + - interrupts + + - if: + properties: + compatible: + contains: + const: google,cros-ec-fp + then: + properties: + '#address-cells': false + '#size-cells': false + typec: false + ec-pwm: false + kbd-led-backlight: false + keyboard-controller: false + proximity: false + codecs: false + cbas: false + + patternProperties: + "^i2c-tunnel[0-9]*$": false + "^regulator@[0-9]+$": false + "^extcon[0-9]*$": false + + # Using additionalProperties: false here and + # listing true properties doesn't work + + required: + - reset-gpios + - boot0-gpios + - vdd-supply + else: + properties: + reset-gpios: false + boot0-gpios: false + vdd-supply: false + additionalProperties: false examples: @@ -175,7 +251,7 @@ examples: #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; @@ -192,7 +268,7 @@ examples: #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; @@ -204,6 +280,8 @@ examples: interrupts = <99 0>; interrupt-parent = <&gpio7>; spi-max-frequency = <5000000>; + #gpio-cells = <2>; + gpio-controller; proximity { compatible = "google,cros-ec-mkbp-proximity"; @@ -222,4 +300,30 @@ examples: compatible = "google,cros-ec-rpmsg"; }; }; + + # Example for FPMCU + - | + spi { + #address-cells = <0x1>; + #size-cells = <0x0>; + + ec@0 { + compatible = "google,cros-ec-fp", "google,cros-ec-spi"; + reg = <0x0>; + interrupt-parent = <&gpio_controller>; + interrupts = <4 IRQ_TYPE_LEVEL_LOW>; + spi-max-frequency = <3000000>; + reset-gpios = <&gpio_controller 5 GPIO_ACTIVE_LOW>; + boot0-gpios = <&gpio_controller 10 GPIO_ACTIVE_HIGH>; + vdd-supply = <&pp3300_fp_mcu>; + }; + }; + + # Example for UART + - | + serial { + cros-ec { + compatible = "google,cros-ec-uart"; + }; + }; ... diff --git a/dts/Bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml b/dts/Bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml index 22edcb4b21..6a82435183 100644 --- a/dts/Bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml +++ b/dts/Bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml @@ -17,7 +17,7 @@ description: | node. The SPMI controller part is provided by - Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml + Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml properties: $nodename: @@ -42,18 +42,11 @@ properties: additionalProperties: false - properties: - '#address-cells': - const: 1 - - '#size-cells': - const: 0 - patternProperties: '^ldo[0-9]+$': type: object - $ref: "/schemas/regulator/regulator.yaml#" + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false @@ -66,72 +59,75 @@ additionalProperties: false examples: - | + #include <dt-bindings/spmi/spmi.h> - pmic: pmic@0 { - compatible = "hisilicon,hi6421v600-spmi"; - reg = <0 0>; - - #interrupt-cells = <2>; - interrupt-controller; - interrupt-parent = <&gpio28>; - interrupts = <0 0>; - - regulators { - #address-cells = <1>; + spmi { + #address-cells = <2>; #size-cells = <0>; - ldo3: ldo3 { - regulator-name = "ldo3"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <2000000>; - regulator-boot-on; - }; - - ldo4: ldo4 { - regulator-name = "ldo4"; - regulator-min-microvolt = <1725000>; - regulator-max-microvolt = <1900000>; - regulator-boot-on; - }; - - ldo9: ldo9 { - regulator-name = "ldo9"; - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; - - ldo15: ldo15 { - regulator-name = "ldo15"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - ldo16: ldo16 { - regulator-name = "ldo16"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; - }; - - ldo17: ldo17 { - regulator-name = "ldo17"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <3300000>; - }; - - ldo33: ldo33 { - regulator-name = "ldo33"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; - - ldo34: ldo34 { - regulator-name = "ldo34"; - regulator-min-microvolt = <2600000>; - regulator-max-microvolt = <3300000>; + pmic@0 { + compatible = "hisilicon,hi6421v600-spmi"; + reg = <0 SPMI_USID>; + + #interrupt-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio28>; + interrupts = <0 0>; + + regulators { + ldo3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2000000>; + regulator-boot-on; + }; + + ldo4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <1900000>; + regulator-boot-on; + }; + + ldo9 { + regulator-name = "ldo9"; + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo15 { + regulator-name = "ldo15"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo16 { + regulator-name = "ldo16"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + }; + + ldo17 { + regulator-name = "ldo17"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + + ldo33 { + regulator-name = "ldo33"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo34 { + regulator-name = "ldo34"; + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <3300000>; + }; + }; }; - }; }; diff --git a/dts/Bindings/mfd/iqs62x.yaml b/dts/Bindings/mfd/iqs62x.yaml index 044cd7542c..f438c23749 100644 --- a/dts/Bindings/mfd/iqs62x.yaml +++ b/dts/Bindings/mfd/iqs62x.yaml @@ -31,7 +31,7 @@ properties: maxItems: 1 firmware-name: - $ref: /schemas/types.yaml#/definitions/string + maxItems: 1 description: Specifies the name of the calibration and configuration file selected by the driver. If this property is omitted, the name is chosen based on the diff --git a/dts/Bindings/mfd/khadas,mcu.yaml b/dts/Bindings/mfd/khadas,mcu.yaml index a3b976f101..084960fd5a 100644 --- a/dts/Bindings/mfd/khadas,mcu.yaml +++ b/dts/Bindings/mfd/khadas,mcu.yaml @@ -4,10 +4,10 @@ $id: http://devicetree.org/schemas/mfd/khadas,mcu.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Khadas on-board Microcontroller Device Tree Bindings +title: Khadas on-board Microcontroller maintainers: - - Neil Armstrong <narmstrong@baylibre.com> + - Neil Armstrong <neil.armstrong@linaro.org> description: | Khadas embeds a microcontroller on their VIM and Edge boards adding some diff --git a/dts/Bindings/mfd/max77650.yaml b/dts/Bindings/mfd/max77650.yaml index b0a0f0d3d9..4181174fcf 100644 --- a/dts/Bindings/mfd/max77650.yaml +++ b/dts/Bindings/mfd/max77650.yaml @@ -100,14 +100,12 @@ examples: compatible = "maxim,max77650-regulator"; max77650_ldo: regulator-ldo { - regulator-compatible = "ldo"; regulator-name = "max77650-ldo"; regulator-min-microvolt = <1350000>; regulator-max-microvolt = <2937500>; }; max77650_sbb0: regulator-sbb0 { - regulator-compatible = "sbb0"; regulator-name = "max77650-sbb0"; regulator-min-microvolt = <800000>; regulator-max-microvolt = <1587500>; diff --git a/dts/Bindings/mfd/max8925.txt b/dts/Bindings/mfd/max8925.txt deleted file mode 100644 index 4f0dc6638e..0000000000 --- a/dts/Bindings/mfd/max8925.txt +++ /dev/null @@ -1,64 +0,0 @@ -* Maxim max8925 Power Management IC - -Required parent device properties: -- compatible : "maxim,max8925" -- reg : the I2C slave address for the max8925 chip -- interrupts : IRQ line for the max8925 chip -- interrupt-controller: describes the max8925 as an interrupt - controller (has its own domain) -- #interrupt-cells : should be 1. - - The cell is the max8925 local IRQ number - -Optional parent device properties: -- maxim,tsc-irq: there are 2 IRQ lines for max8925, one is indicated in - interrupts property, the other is indicated here. - -max8925 consists of a large and varied group of sub-devices: - -Device Supply Names Description ------- ------------ ----------- -max8925-onkey : : On key -max8925-rtc : : RTC -max8925-regulator : : Regulators -max8925-backlight : : Backlight -max8925-touch : : Touchscreen -max8925-power : : Charger - -Example: - - pmic: max8925@3c { - compatible = "maxim,max8925"; - reg = <0x3c>; - interrupts = <1>; - interrupt-parent = <&intcmux4>; - interrupt-controller; - #interrupt-cells = <1>; - maxim,tsc-irq = <0>; - - regulators { - SDV1 { - regulator-min-microvolt = <637500>; - regulator-max-microvolt = <1425000>; - regulator-boot-on; - regulator-always-on; - }; - - LDO1 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - - }; - backlight { - maxim,max8925-dual-string = <0>; - }; - charger { - batt-detect = <0>; - topoff-threshold = <1>; - fast-charge = <7>; - no-temp-support = <0>; - no-insert-detect = <0>; - }; - }; diff --git a/dts/Bindings/mfd/max8998.txt b/dts/Bindings/mfd/max8998.txt deleted file mode 100644 index 4ed52184d0..0000000000 --- a/dts/Bindings/mfd/max8998.txt +++ /dev/null @@ -1,125 +0,0 @@ -* Maxim MAX8998, National/TI LP3974 multi-function device - -The Maxim MAX8998 is a multi-function device which includes voltage/current -regulators, real time clock, battery charging controller and several -other sub-blocks. It is interfaced using an I2C interface. Each sub-block -is addressed by the host system using different i2c slave address. - -PMIC sub-block --------------- - -The PMIC sub-block contains a number of voltage and current regulators, -with controllable parameters and dynamic voltage scaling capability. -In addition, it includes a real time clock and battery charging controller -as well. It is accessible at I2C address 0x66. - -Required properties: -- compatible: Should be one of the following: - - "maxim,max8998" for Maxim MAX8998 - - "national,lp3974" or "ti,lp3974" for National/TI LP3974. -- reg: Specifies the i2c slave address of the pmic block. It should be 0x66. - -Optional properties: -- interrupts: Interrupt specifiers for two interrupt sources. - - First interrupt specifier is for main interrupt. - - Second interrupt specifier is for power-on/-off interrupt. -- max8998,pmic-buck1-dvs-gpios: GPIO specifiers for two host gpios used - for buck 1 dvs. The format of the gpio specifier depends on the gpio - controller. -- max8998,pmic-buck2-dvs-gpio: GPIO specifier for host gpio used - for buck 2 dvs. The format of the gpio specifier depends on the gpio - controller. -- max8998,pmic-buck1-default-dvs-idx: Default voltage setting selected from - the possible 4 options selectable by the dvs gpios. The value of this - property should be 0, 1, 2 or 3. If not specified or out of range, - a default value of 0 is taken. -- max8998,pmic-buck2-default-dvs-idx: Default voltage setting selected from - the possible 2 options selectable by the dvs gpios. The value of this - property should be 0 or 1. If not specified or out of range, a default - value of 0 is taken. -- max8998,pmic-buck-voltage-lock: If present, disallows changing of - preprogrammed buck dvfs voltages. - -Additional properties required if max8998,pmic-buck1-dvs-gpios is defined: -- max8998,pmic-buck1-dvs-voltage: An array of 4 voltage values in microvolts - for buck1 regulator that can be selected using dvs gpio. - -Additional properties required if max8998,pmic-buck2-dvs-gpio is defined: -- max8998,pmic-buck2-dvs-voltage: An array of 2 voltage values in microvolts - for buck2 regulator that can be selected using dvs gpio. - -Regulators: All the regulators of MAX8998 to be instantiated shall be -listed in a child node named 'regulators'. Each regulator is represented -by a child node of the 'regulators' node. - - regulator-name { - /* standard regulator bindings here */ - }; - -Following regulators of the MAX8998 PMIC block are supported. Note that -the 'n' in regulator name, as in LDOn or BUCKn, represents the LDO or BUCK -number as described in MAX8998 datasheet. - - - LDOn - - valid values for n are 2 to 17 - - Example: LDO2, LDO10, LDO17 - - BUCKn - - valid values for n are 1 to 4. - - Example: BUCK1, BUCK2, BUCK3, BUCK4 - - - ENVICHG: Battery Charging Current Monitor Output. This is a fixed - voltage type regulator - - - ESAFEOUT1: (ldo19) - - ESAFEOUT2: (ld020) - - - CHARGER: main battery charger current control - -Standard regulator bindings are used inside regulator subnodes. Check - Documentation/devicetree/bindings/regulator/regulator.txt -for more details. - -Example: - - pmic@66 { - compatible = "maxim,max8998-pmic"; - reg = <0x66>; - interrupt-parent = <&wakeup_eint>; - interrupts = <4 0>, <3 0>; - - /* Buck 1 DVS settings */ - max8998,pmic-buck1-default-dvs-idx = <0>; - max8998,pmic-buck1-dvs-gpios = <&gpx0 0 1 0 0>, /* SET1 */ - <&gpx0 1 1 0 0>; /* SET2 */ - max8998,pmic-buck1-dvs-voltage = <1350000>, <1300000>, - <1000000>, <950000>; - - /* Buck 2 DVS settings */ - max8998,pmic-buck2-default-dvs-idx = <0>; - max8998,pmic-buck2-dvs-gpio = <&gpx0 0 3 0 0>; /* SET3 */ - max8998,pmic-buck2-dvs-voltage = <1350000>, <1300000>; - - /* Regulators to instantiate */ - regulators { - ldo2_reg: LDO2 { - regulator-name = "VDD_ALIVE_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "VDD_ARM_1.2V"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - charger_reg: CHARGER { - regulator-name = "CHARGER"; - regulator-min-microamp = <90000>; - regulator-max-microamp = <800000>; - }; - }; - }; diff --git a/dts/Bindings/mfd/maxim,max14577.yaml b/dts/Bindings/mfd/maxim,max14577.yaml index 52edd1bf54..995e96ee74 100644 --- a/dts/Bindings/mfd/maxim,max14577.yaml +++ b/dts/Bindings/mfd/maxim,max14577.yaml @@ -39,6 +39,7 @@ properties: extcon: type: object + additionalProperties: false properties: compatible: enum: diff --git a/dts/Bindings/mfd/maxim,max5970.yaml b/dts/Bindings/mfd/maxim,max5970.yaml new file mode 100644 index 0000000000..0da5cae385 --- /dev/null +++ b/dts/Bindings/mfd/maxim,max5970.yaml @@ -0,0 +1,156 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max5970.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Regulator for MAX5970 Smart Switch from Maxim Integrated + +maintainers: + - Patrick Rudolph <patrick.rudolph@9elements.com> + +description: | + The smart switch provides no output regulation, but independent fault protection + and voltage and current sensing. + Programming is done through I2C bus. + + Datasheets: + https://datasheets.maximintegrated.com/en/ds/MAX5970.pdf + https://datasheets.maximintegrated.com/en/ds/MAX5978.pdf + +properties: + compatible: + enum: + - maxim,max5970 + - maxim,max5978 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + leds: + type: object + description: + Properties for four LEDS. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + "^led@[0-3]$": + $ref: /schemas/leds/common.yaml# + unevaluatedProperties: false + type: object + + properties: + reg: + maximum: 3 + + additionalProperties: false + + vss1-supply: + description: Supply of the first channel. + + vss2-supply: + description: Supply of the second channel. + + regulators: + type: object + description: + Properties for both hot swap control/switch. + + patternProperties: + "^sw[0-1]$": + $ref: /schemas/regulator/regulator.yaml# + type: object + properties: + shunt-resistor-micro-ohms: + description: | + The value of current sense resistor in microohms. + + required: + - shunt-resistor-micro-ohms + + unevaluatedProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - regulators + - vss1-supply + +allOf: + - if: + properties: + compatible: + enum: + - maxim,max5970 + then: + required: + - vss2-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p3v3>; + + regulators { + sw0_ref_0: sw0 { + shunt-resistor-micro-ohms = <12000>; + }; + }; + + leds { + #address-cells = <1>; + #size-cells = <0>; + led@0 { + reg = <0>; + label = "led0"; + default-state = "on"; + }; + led@1 { + reg = <1>; + label = "led1"; + default-state = "on"; + }; + }; + }; + }; + + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + vss1-supply = <&p3v3>; + vss2-supply = <&p5v>; + + regulators { + sw0_ref_1: sw0 { + shunt-resistor-micro-ohms = <12000>; + }; + sw1_ref_1: sw1 { + shunt-resistor-micro-ohms = <10000>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/mfd/maxim,max77693.yaml b/dts/Bindings/mfd/maxim,max77693.yaml index 1b06a77ec7..6a6f222b86 100644 --- a/dts/Bindings/mfd/maxim,max77693.yaml +++ b/dts/Bindings/mfd/maxim,max77693.yaml @@ -37,6 +37,7 @@ properties: max77693-muic: type: object additionalProperties: false + deprecated: true properties: compatible: @@ -45,6 +46,21 @@ properties: required: - compatible + muic: + type: object + additionalProperties: false + + properties: + compatible: + const: maxim,max77693-muic + + connector: + $ref: /schemas/connector/usb-connector.yaml# + unevaluatedProperties: false + + required: + - compatible + motor-driver: type: object additionalProperties: false @@ -107,6 +123,38 @@ examples: }; }; + muic { + compatible = "maxim,max77693-muic"; + + connector { + compatible = "samsung,usb-connector-11pin", + "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + muic_to_usb: endpoint { + remote-endpoint = <&usb_to_muic>; + }; + }; + + port@3 { + reg = <3>; + + muic_to_mhl: endpoint { + remote-endpoint = <&mhl_to_muic>; + }; + }; + }; + }; + }; + motor-driver { compatible = "maxim,max77693-haptic"; haptic-supply = <&ldo26_reg>; diff --git a/dts/Bindings/mfd/maxim,max77843.yaml b/dts/Bindings/mfd/maxim,max77843.yaml index f30f96bbff..2e2a2a86b5 100644 --- a/dts/Bindings/mfd/maxim,max77843.yaml +++ b/dts/Bindings/mfd/maxim,max77843.yaml @@ -32,6 +32,7 @@ properties: motor-driver: type: object + additionalProperties: false properties: compatible: const: maxim,max77843-haptic diff --git a/dts/Bindings/mfd/maxim,max8925.yaml b/dts/Bindings/mfd/maxim,max8925.yaml new file mode 100644 index 0000000000..86dd810851 --- /dev/null +++ b/dts/Bindings/mfd/maxim,max8925.yaml @@ -0,0 +1,145 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max8925.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MAX8925 PMIC from Maxim Integrated. + +maintainers: + - Lee Jones <lee@kernel.org> + +properties: + compatible: + const: maxim,max8925 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + description: + The cell is the IRQ number + + maxim,tsc-irq: + description: second interrupt from max8925 + $ref: /schemas/types.yaml#/definitions/uint32 + + regulators: + type: object + + patternProperties: + "^SDV[1-3]$|^LDO[1-9]$|^LDO1[0-9]$|^LDO20$": + description: regulator configuration for SDV1-3 and LDO1-20 + $ref: /schemas/regulator/regulator.yaml + unevaluatedProperties: false + + additionalProperties: false + + backlight: + type: object + properties: + maxim,max8925-dual-string: + description: set to 1 to support dual string + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + default: 0 + + additionalProperties: false + + charger: + type: object + properties: + batt-detect: + description: set to 1 if battery detection via ID pin is supported + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + default: 0 + + topoff-threshold: + description: charging current in topoff mode, configures bits 5-6 in CHG_CNTL1 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 0 + + fast-charge: + description: set charging current in fast mode, configures bits 0-3 in CHG_CNTL1 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + default: 0 + + no-temp-support: + description: set to 1 if temperature sensing is not supported + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + default: 0 + + no-insert-detect: + description: set to 1 if AC detection is not supported + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + default: 0 + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + - regulators + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@3c { + compatible = "maxim,max8925"; + reg = <0x3c>; + interrupts = <1>; + interrupt-parent = <&intcmux4>; + interrupt-controller; + #interrupt-cells = <1>; + maxim,tsc-irq = <0>; + + regulators { + SDV1 { + regulator-min-microvolt = <637500>; + regulator-max-microvolt = <1425000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO1 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + }; + + backlight { + maxim,max8925-dual-string = <0>; + }; + + charger { + batt-detect = <0>; + topoff-threshold = <1>; + fast-charge = <7>; + no-temp-support = <0>; + no-insert-detect = <0>; + }; + }; + }; diff --git a/dts/Bindings/mfd/maxim,max8998.yaml b/dts/Bindings/mfd/maxim,max8998.yaml new file mode 100644 index 0000000000..f3c3f64fd0 --- /dev/null +++ b/dts/Bindings/mfd/maxim,max8998.yaml @@ -0,0 +1,324 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max8998.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX8998, National/TI LP3974 Power Management IC + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +description: + The Maxim MAX8998 is a Power Management IC which includes voltage/current + regulators, real time clock, battery charging controller and several other + sub-blocks. It is interfaced using an I2C interface. Each sub-block is + addressed by the host system using different i2c slave address. + +properties: + compatible: + enum: + - maxim,max8998 + - national,lp3974 + - ti,lp3974 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + items: + - description: Main interrupt + - description: Power-on/-off interrupt + + max8998,pmic-buck1-dvs-gpios: + maxItems: 2 + description: + Two host gpios used for buck1 DVS. + + max8998,pmic-buck2-dvs-gpio: + maxItems: 1 + description: + Host gpio used for buck2 DVS. + + max8998,pmic-buck1-default-dvs-idx: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: + Default voltage setting selected from the possible 4 options selectable + by the DVS gpios. + + max8998,pmic-buck2-default-dvs-idx: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + default: 0 + description: + Default voltage setting selected from the possible 2 options selectable + by the DVS GPIOs. + + max8998,pmic-buck-voltage-lock: + type: boolean + description: + If present, disallows changing of preprogrammed buck DVS voltages. + + max8998,pmic-buck1-dvs-voltage: + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 4 + description: + Four voltage values in microvolts for buck1 regulator that can be + selected using DVS GPIO. + + max8998,pmic-buck2-dvs-voltage: + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 2 + description: + Two voltage values in microvolts for buck2 regulator that can be + selected using DVS GPIO. + + regulators: + type: object + additionalProperties: false + + properties: + CHARGER: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + description: + CHARGER is main battery charger current control, wrongly represented + as regulator. + + properties: + regulator-min-microamp: + minimum: 90000 + maximum: 800000 + + regulator-max-microamp: + minimum: 90000 + maximum: 800000 + + regulator-min-microvolt: false + regulator-max-microvolt: false + + required: + - regulator-name + + patternProperties: + "^(LDO([2-9]|1[0-7])|BUCK[1-4])$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + required: + - regulator-name + + "^(EN32KHz-AP|EN32KHz-CP|ENVICHG|ESAFEOUT[12])$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + description: | + EN32KHz-AP and EN32KHz-CP are 32768 Hz clocks, wrongly represented as + regulators. + ENVICHG is a Battery Charging Current Monitor Output. + + properties: + regulator-min-microvolt: false + regulator-max-microvolt: false + + required: + - regulator-name + +dependencies: + max8998,pmic-buck1-dvs-gpios: [ "max8998,pmic-buck1-dvs-voltage" ] + max8998,pmic-buck2-dvs-gpio: [ "max8998,pmic-buck2-dvs-voltage" ] + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "national,lp3974"; + reg = <0x66>; + interrupts-extended = <&gpx0 7 IRQ_TYPE_LEVEL_LOW>, + <&gpx2 7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&lp3974_irq>; + + max8998,pmic-buck1-default-dvs-idx = <0>; + max8998,pmic-buck1-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>, + <&gpx0 6 GPIO_ACTIVE_HIGH>; + max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>, + <1100000>, <1000000>; + max8998,pmic-buck2-default-dvs-idx = <0>; + max8998,pmic-buck2-dvs-gpio = <&gpe2 0 GPIO_ACTIVE_HIGH>; + max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>; + + regulators { + LDO2 { + regulator-name = "VALIVE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + LDO3 { + regulator-name = "VUSB+MIPI_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + LDO4 { + regulator-name = "VADC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + LDO5 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + LDO6 { + regulator-name = "LDO6"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + }; + + LDO7 { + regulator-name = "VLCD+VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + LDO8 { + regulator-name = "VUSB+VDAC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + LDO9 { + regulator-name = "VCC_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + LDO10 { + regulator-name = "VPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO11 { + regulator-name = "CAM_AF_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + LDO12 { + regulator-name = "PS_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + LDO13 { + regulator-name = "VHIC_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + LDO14 { + regulator-name = "CAM_I_HOST_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + LDO15 { + regulator-name = "CAM_S_DIG+FM33_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + LDO16 { + regulator-name = "CAM_S_ANA_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + LDO17 { + regulator-name = "VCC_3.0V_LCD"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + BUCK1 { + regulator-name = "VINT_1.1V"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + BUCK2 { + regulator-name = "VG3D_1.1V"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + }; + + BUCK3 { + regulator-name = "VCC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + BUCK4 { + regulator-name = "VMEM_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + EN32KHz-AP { + regulator-name = "32KHz AP"; + regulator-always-on; + }; + + EN32KHz-CP { + regulator-name = "32KHz CP"; + }; + + ENVICHG { + regulator-name = "VICHG"; + }; + + ESAFEOUT1 { + regulator-name = "SAFEOUT1"; + }; + + ESAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-boot-on; + }; + }; + }; + }; diff --git a/dts/Bindings/mfd/mediatek,mt6357.yaml b/dts/Bindings/mfd/mediatek,mt6357.yaml new file mode 100644 index 0000000000..37423c2e0f --- /dev/null +++ b/dts/Bindings/mfd/mediatek,mt6357.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/mediatek,mt6357.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT6357 PMIC + +maintainers: + - Flora Fu <flora.fu@mediatek.com> + - Alexandre Mergnat <amergnat@baylibre.com> + +description: | + MT6357 is a power management system chip containing 5 buck + converters and 29 LDOs. Supported features are audio codec, + USB battery charging, fuel gauge, RTC + + This is a multifunction device with the following sub modules: + - Regulator + - RTC + - Keys + + It is interfaced to host controller using SPI interface by a proprietary hardware + called PMIC wrapper or pwrap. This MFD is a child device of pwrap. + See the following for pwrap node definitions: + Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml + +properties: + compatible: + const: mediatek,mt6357 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + regulators: + type: object + $ref: /schemas/regulator/mediatek,mt6357-regulator.yaml + unevaluatedProperties: false + description: + List of MT6357 BUCKs and LDOs regulators. + + rtc: + type: object + $ref: /schemas/rtc/rtc.yaml# + unevaluatedProperties: false + description: + MT6357 Real Time Clock. + properties: + compatible: + const: mediatek,mt6357-rtc + start-year: true + required: + - compatible + + keys: + type: object + $ref: /schemas/input/mediatek,pmic-keys.yaml + unevaluatedProperties: false + description: + MT6357 power and home keys. + +required: + - compatible + - regulators + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pwrap { + pmic { + compatible = "mediatek,mt6357"; + + interrupt-parent = <&pio>; + interrupts = <145 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + regulators { + mt6357_vproc_reg: buck-vproc { + regulator-name = "vproc"; + regulator-min-microvolt = <518750>; + regulator-max-microvolt = <1312500>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <220>; + regulator-always-on; + }; + + // ... + + mt6357_vusb33_reg: ldo-vusb33 { + regulator-name = "vusb33"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3100000>; + regulator-enable-ramp-delay = <264>; + }; + }; + + rtc { + compatible = "mediatek,mt6357-rtc"; + }; + + keys { + compatible = "mediatek,mt6357-keys"; + }; + }; + }; diff --git a/dts/Bindings/mfd/mediatek,mt6360.yaml b/dts/Bindings/mfd/mediatek,mt6360.yaml index 28eee02441..fb65abf30d 100644 --- a/dts/Bindings/mfd/mediatek,mt6360.yaml +++ b/dts/Bindings/mfd/mediatek,mt6360.yaml @@ -83,7 +83,6 @@ examples: richtek,vinovp-microvolt = <14500000>; otg_vbus_regulator: usb-otg-vbus-regulator { - regulator-compatible = "usb-otg-vbus"; regulator-name = "usb-otg-vbus"; regulator-min-microvolt = <4425000>; regulator-max-microvolt = <5825000>; @@ -145,7 +144,6 @@ examples: compatible = "mediatek,mt6360-regulator"; LDO_VIN3-supply = <&BUCK2>; buck1 { - regulator-compatible = "BUCK1"; regulator-name = "mt6360,buck1"; regulator-min-microvolt = <300000>; regulator-max-microvolt = <1300000>; @@ -154,7 +152,6 @@ examples: MT6360_OPMODE_ULP>; }; BUCK2: buck2 { - regulator-compatible = "BUCK2"; regulator-name = "mt6360,buck2"; regulator-min-microvolt = <300000>; regulator-max-microvolt = <1300000>; @@ -163,7 +160,6 @@ examples: MT6360_OPMODE_ULP>; }; ldo6 { - regulator-compatible = "LDO6"; regulator-name = "mt6360,ldo6"; regulator-min-microvolt = <500000>; regulator-max-microvolt = <2100000>; @@ -171,7 +167,6 @@ examples: MT6360_OPMODE_LP>; }; ldo7 { - regulator-compatible = "LDO7"; regulator-name = "mt6360,ldo7"; regulator-min-microvolt = <500000>; regulator-max-microvolt = <2100000>; @@ -179,7 +174,6 @@ examples: MT6360_OPMODE_LP>; }; ldo1 { - regulator-compatible = "LDO1"; regulator-name = "mt6360,ldo1"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3600000>; @@ -187,7 +181,6 @@ examples: MT6360_OPMODE_LP>; }; ldo2 { - regulator-compatible = "LDO2"; regulator-name = "mt6360,ldo2"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3600000>; @@ -195,7 +188,6 @@ examples: MT6360_OPMODE_LP>; }; ldo3 { - regulator-compatible = "LDO3"; regulator-name = "mt6360,ldo3"; regulator-min-microvolt = <1200000>; regulator-max-microvolt = <3600000>; @@ -203,7 +195,6 @@ examples: MT6360_OPMODE_LP>; }; ldo5 { - regulator-compatible = "LDO5"; regulator-name = "mt6360,ldo5"; regulator-min-microvolt = <2700000>; regulator-max-microvolt = <3600000>; diff --git a/dts/Bindings/mfd/mediatek,mt6370.yaml b/dts/Bindings/mfd/mediatek,mt6370.yaml new file mode 100644 index 0000000000..c9574b2430 --- /dev/null +++ b/dts/Bindings/mfd/mediatek,mt6370.yaml @@ -0,0 +1,282 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/mediatek,mt6370.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT6370 SubPMIC + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + MT6370 is a highly-integrated smart power management IC, which includes a + single cell Li-Ion/Li-Polymer switching battery charger, a USB Type-C & + Power Delivery (PD) controller, dual flash LED current sources, a RGB LED + driver, a backlight WLED driver, a display bias driver and a general LDO for + portable devices. + +properties: + compatible: + const: mediatek,mt6370 + + reg: + maxItems: 1 + + wakeup-source: true + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + adc: + type: object + additionalProperties: false + description: | + Provides 9 channels for system monitoring, including VBUSDIV5 (lower + accuracy, higher measure range), VBUSDIV2 (higher accuracy, lower + measure range), VBAT, VSYS, CHG_VDDP, TS_BAT, IBUS, IBAT, and TEMP_JC. + + properties: + compatible: + const: mediatek,mt6370-adc + + "#io-channel-cells": + const: 1 + + required: + - compatible + - "#io-channel-cells" + + backlight: + type: object + $ref: /schemas/leds/backlight/mediatek,mt6370-backlight.yaml# + + charger: + type: object + $ref: /schemas/power/supply/mediatek,mt6370-charger.yaml# + + tcpc: + type: object + $ref: /schemas/usb/mediatek,mt6370-tcpc.yaml# + + indicator: + type: object + $ref: /schemas/leds/mediatek,mt6370-indicator.yaml# + + flashlight: + type: object + $ref: /schemas/leds/mediatek,mt6370-flashlight.yaml# + + regulators: + type: object + additionalProperties: false + description: | + List all supported regulators, which support the control for DisplayBias + voltages and one general purpose LDO which commonly used to drive the + vibrator. + + patternProperties: + "^(dsvbst|vibldo)$": + $ref: /schemas/regulator/regulator.yaml# + type: object + unevaluatedProperties: false + + "^(dsvpos|dsvneg)$": + $ref: /schemas/regulator/regulator.yaml# + type: object + unevaluatedProperties: false + + properties: + enable-gpios: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + - regulators + - adc + - backlight + - indicator + - tcpc + - charger + - flashlight + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/leds/common.h> + #include <dt-bindings/iio/adc/mediatek,mt6370_adc.h> + #include <dt-bindings/usb/pd.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@34 { + compatible = "mediatek,mt6370"; + reg = <0x34>; + wakeup-source; + interrupts-extended = <&gpio26 3 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + + mt6370_adc: adc { + compatible = "mediatek,mt6370-adc"; + #io-channel-cells = <1>; + }; + + backlight { + compatible = "mediatek,mt6370-backlight"; + mediatek,bled-channel-use = /bits/ 8 <15>; + }; + + charger { + compatible = "mediatek,mt6370-charger"; + interrupts = <68>, <48>, <6>; + interrupt-names = "uvp_d_evt", "attach_i", "mivr"; + io-channels = <&mt6370_adc MT6370_CHAN_IBUS>; + + mt6370_otg_vbus: usb-otg-vbus-regulator { + regulator-name = "mt6370-usb-otg-vbus"; + regulator-min-microvolt = <4350000>; + regulator-max-microvolt = <5800000>; + regulator-min-microamp = <500000>; + regulator-max-microamp = <3000000>; + }; + }; + + indicator { + compatible = "mediatek,mt6370-indicator"; + #address-cells = <1>; + #size-cells = <0>; + + multi-led@0 { + reg = <0>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_RGB>; + led-max-microamp = <24000>; + #address-cells = <1>; + #size-cells = <0>; + led@0 { + reg = <0>; + color = <LED_COLOR_ID_RED>; + }; + led@1 { + reg = <1>; + color = <LED_COLOR_ID_GREEN>; + }; + led@2 { + reg = <2>; + color = <LED_COLOR_ID_BLUE>; + }; + }; + led@3 { + reg = <3>; + function = LED_FUNCTION_INDICATOR; + color = <LED_COLOR_ID_WHITE>; + led-max-microamp = <6000>; + }; + }; + + flashlight { + compatible = "mediatek,mt6370-flashlight"; + #address-cells = <1>; + #size-cells = <0>; + led@0 { + reg = <0>; + led-sources = <0>; + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + function-enumerator = <1>; + led-max-microamp = <200000>; + flash-max-microamp = <500000>; + flash-max-timeout-us = <1248000>; + }; + led@1 { + reg = <1>; + led-sources = <1>; + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + function-enumerator = <2>; + led-max-microamp = <200000>; + flash-max-microamp = <500000>; + flash-max-timeout-us = <1248000>; + }; + }; + + tcpc { + compatible = "mediatek,mt6370-tcpc"; + interrupts-extended = <&gpio26 4 IRQ_TYPE_LEVEL_LOW>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + vbus-supply = <&mt6370_otg_vbus>; + data-role = "dual"; + power-role = "dual"; + try-power-role = "sink"; + source-pdos = <PDO_FIXED(5000, 1000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>; + sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_DUAL_ROLE | PDO_FIXED_DATA_SWAP)>; + op-sink-microwatt = <10000000>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + endpoint { + remote-endpoint = <&usb_hs>; + }; + }; + port@1 { + reg = <1>; + endpoint { + remote-endpoint = <&usb_ss>; + }; + }; + port@2 { + reg = <2>; + endpoint { + remote-endpoint = <&dp_aux>; + }; + }; + }; + }; + }; + + regulators { + dsvbst { + regulator-name = "mt6370-dsv-vbst"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6200000>; + }; + dsvpos { + regulator-name = "mt6370-dsv-vpos"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-boot-on; + }; + dsvneg { + regulator-name = "mt6370-dsv-vneg"; + regulator-min-microvolt = <4000000>; + regulator-max-microvolt = <6000000>; + regulator-boot-on; + }; + vibldo { + regulator-name = "mt6370-vib-ldo"; + regulator-min-microvolt = <1600000>; + regulator-max-microvolt = <4000000>; + }; + }; + }; + }; diff --git a/dts/Bindings/mfd/mediatek,mt8195-scpsys.yaml b/dts/Bindings/mfd/mediatek,mt8195-scpsys.yaml new file mode 100644 index 0000000000..c8c4812fff --- /dev/null +++ b/dts/Bindings/mfd/mediatek,mt8195-scpsys.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/mediatek,mt8195-scpsys.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek System Control Processor System + +maintainers: + - MandyJH Liu <mandyjh.liu@mediatek.com> + +description: + MediaTek System Control Processor System (SCPSYS) has several + power management tasks. The tasks include MTCMOS power + domain control, thermal measurement, DVFS, etc. + +properties: + compatible: + items: + - enum: + - mediatek,mt8167-scpsys + - mediatek,mt8173-scpsys + - mediatek,mt8183-scpsys + - mediatek,mt8186-scpsys + - mediatek,mt8192-scpsys + - mediatek,mt8195-scpsys + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + power-controller: + $ref: /schemas/power/mediatek,power-controller.yaml# + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/mt8195-clk.h> + #include <dt-bindings/power/mt8195-power.h> + + syscon@10006000 { + compatible = "mediatek,mt8195-scpsys", "syscon", "simple-mfd"; + reg = <0x10006000 0x100>; + + spm: power-controller { + compatible = "mediatek,mt8195-power-controller"; + #address-cells = <1>; + #size-cells = <0>; + #power-domain-cells = <1>; + + /* sample of power domain nodes */ + power-domain@MT8195_POWER_DOMAIN_PCIE_PHY { + reg = <MT8195_POWER_DOMAIN_PCIE_PHY>; + #power-domain-cells = <0>; + }; + + power-domain@MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY { + reg = <MT8195_POWER_DOMAIN_SSUSB_PCIE_PHY>; + #power-domain-cells = <0>; + }; + }; + }; diff --git a/dts/Bindings/mfd/mscc,ocelot.yaml b/dts/Bindings/mfd/mscc,ocelot.yaml new file mode 100644 index 0000000000..8bd1abfc44 --- /dev/null +++ b/dts/Bindings/mfd/mscc,ocelot.yaml @@ -0,0 +1,169 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause */ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/mscc,ocelot.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Ocelot Externally-Controlled Ethernet Switch + +maintainers: + - Colin Foster <colin.foster@in-advantage.com> + +description: | + The Ocelot ethernet switch family contains chips that have an internal CPU + (VSC7513, VSC7514) and chips that don't (VSC7511, VSC7512). All switches have + the option to be controlled externally via external interfaces like SPI or + PCIe. + + The switch family is a multi-port networking switch that supports many + interfaces. Additionally, the device can perform pin control, MDIO buses, and + external GPIO expanders. + +properties: + compatible: + enum: + - mscc,vsc7512 + + reg: + maxItems: 1 + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + spi-max-frequency: + maxItems: 1 + +patternProperties: + "^pinctrl@[0-9a-f]+$": + type: object + $ref: /schemas/pinctrl/mscc,ocelot-pinctrl.yaml + + "^gpio@[0-9a-f]+$": + type: object + $ref: /schemas/pinctrl/microchip,sparx5-sgpio.yaml + properties: + compatible: + enum: + - mscc,ocelot-sgpio + + "^mdio@[0-9a-f]+$": + type: object + $ref: /schemas/net/mscc,miim.yaml + properties: + compatible: + enum: + - mscc,ocelot-miim + + "^ethernet-switch@[0-9a-f]+$": + type: object + $ref: /schemas/net/mscc,vsc7514-switch.yaml + unevaluatedProperties: false + properties: + compatible: + enum: + - mscc,vsc7512-switch + +required: + - compatible + - reg + - '#address-cells' + - '#size-cells' + +additionalProperties: false + +examples: + - | + ocelot_clock: ocelot-clock { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + }; + + spi { + #address-cells = <1>; + #size-cells = <0>; + + soc@0 { + compatible = "mscc,vsc7512"; + spi-max-frequency = <2500000>; + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + + mdio@7107009c { + compatible = "mscc,ocelot-miim"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x7107009c 0x24>; + + sw_phy0: ethernet-phy@0 { + reg = <0x0>; + }; + }; + + mdio@710700c0 { + compatible = "mscc,ocelot-miim"; + pinctrl-names = "default"; + pinctrl-0 = <&miim1_pins>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x710700c0 0x24>; + + sw_phy4: ethernet-phy@4 { + reg = <0x4>; + }; + }; + + gpio: pinctrl@71070034 { + compatible = "mscc,ocelot-pinctrl"; + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&gpio 0 0 22>; + reg = <0x71070034 0x6c>; + + sgpio_pins: sgpio-pins { + pins = "GPIO_0", "GPIO_1", "GPIO_2", "GPIO_3"; + function = "sg0"; + }; + + miim1_pins: miim1-pins { + pins = "GPIO_14", "GPIO_15"; + function = "miim"; + }; + }; + + gpio@710700f8 { + compatible = "mscc,ocelot-sgpio"; + #address-cells = <1>; + #size-cells = <0>; + bus-frequency = <12500000>; + clocks = <&ocelot_clock>; + microchip,sgpio-port-ranges = <0 15>; + pinctrl-names = "default"; + pinctrl-0 = <&sgpio_pins>; + reg = <0x710700f8 0x100>; + + sgpio_in0: gpio@0 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <0>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <64>; + }; + + sgpio_out1: gpio@1 { + compatible = "microchip,sparx5-sgpio-bank"; + reg = <1>; + gpio-controller; + #gpio-cells = <3>; + ngpios = <64>; + }; + }; + }; + }; + +... + diff --git a/dts/Bindings/mfd/mt6397.txt b/dts/Bindings/mfd/mt6397.txt index 0088442efc..10540aa7af 100644 --- a/dts/Bindings/mfd/mt6397.txt +++ b/dts/Bindings/mfd/mt6397.txt @@ -13,7 +13,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules: It is interfaced to host controller using SPI interface by a proprietary hardware called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap. See the following for pwarp node definitions: -../soc/mediatek/pwrap.txt +../soc/mediatek/mediatek,pwrap.yaml This document describes the binding for MFD device and its sub module. @@ -21,8 +21,10 @@ Required properties: compatible: "mediatek,mt6323" for PMIC MT6323 "mediatek,mt6331" for PMIC MT6331 and MT6332 - "mediatek,mt6358" for PMIC MT6358 and MT6366 + "mediatek,mt6357" for PMIC MT6357 + "mediatek,mt6358" for PMIC MT6358 "mediatek,mt6359" for PMIC MT6359 + "mediatek,mt6366", "mediatek,mt6358" for PMIC MT6366 "mediatek,mt6397" for PMIC MT6397 Optional subnodes: @@ -39,6 +41,7 @@ Optional subnodes: - compatible: "mediatek,mt6323-regulator" see ../regulator/mt6323-regulator.txt - compatible: "mediatek,mt6358-regulator" + - compatible: "mediatek,mt6366-regulator", "mediatek-mt6358-regulator" see ../regulator/mt6358-regulator.txt - compatible: "mediatek,mt6397-regulator" see ../regulator/mt6397-regulator.txt diff --git a/dts/Bindings/mfd/nxp,bbnsm.yaml b/dts/Bindings/mfd/nxp,bbnsm.yaml new file mode 100644 index 0000000000..b1ade64a15 --- /dev/null +++ b/dts/Bindings/mfd/nxp,bbnsm.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/nxp,bbnsm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP Battery-Backed Non-Secure Module + +maintainers: + - Jacky Bai <ping.bai@nxp.com> + +description: | + NXP BBNSM serves as non-volatile logic and storage for the system. + it Intergrates RTC & ON/OFF control. + The RTC can retain its state and continues counting even when the + main chip is power down. A time alarm is generated once the most + significant 32 bits of the real-time counter match the value in the + Time Alarm register. + The ON/OFF logic inside the BBNSM allows for connecting directly to + a PMIC or other voltage regulator device. both smart PMIC mode and + Dumb PMIC mode supported. + +properties: + compatible: + items: + - enum: + - nxp,imx93-bbnsm + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + rtc: + type: object + $ref: /schemas/rtc/rtc.yaml# + + properties: + compatible: + enum: + - nxp,imx93-bbnsm-rtc + + interrupts: + maxItems: 1 + + start-year: true + + required: + - compatible + - interrupts + + additionalProperties: false + + pwrkey: + type: object + $ref: /schemas/input/input.yaml# + + properties: + compatible: + enum: + - nxp,imx93-bbnsm-pwrkey + + interrupts: + maxItems: 1 + + linux,code: true + + required: + - compatible + - interrupts + + additionalProperties: false + +required: + - compatible + - reg + - rtc + - pwrkey + +additionalProperties: false + +examples: + - | + #include <dt-bindings/input/linux-event-codes.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + bbnsm: bbnsm@44440000 { + compatible = "nxp,imx93-bbnsm", "syscon", "simple-mfd"; + reg = <0x44440000 0x10000>; + + bbnsm_rtc: rtc { + compatible = "nxp,imx93-bbnsm-rtc"; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + }; + + bbnsm_pwrkey: pwrkey { + compatible = "nxp,imx93-bbnsm-pwrkey"; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + linux,code = <KEY_POWER>; + }; + }; diff --git a/dts/Bindings/mfd/omap-usb-host.txt b/dts/Bindings/mfd/omap-usb-host.txt index aa1eaa5958..a0d8c30c26 100644 --- a/dts/Bindings/mfd/omap-usb-host.txt +++ b/dts/Bindings/mfd/omap-usb-host.txt @@ -64,8 +64,8 @@ Required properties if child node exists: Properties for children: The OMAP HS USB Host subsystem contains EHCI and OHCI controllers. -See Documentation/devicetree/bindings/usb/ehci-omap.txt and -Documentation/devicetree/bindings/usb/ohci-omap3.txt. +See Documentation/devicetree/bindings/usb/generic-ehci.yaml and +Documentation/devicetree/bindings/usb/generic-ohci.yaml. Example for OMAP4: @@ -78,14 +78,14 @@ usbhshost: usbhshost@4a064000 { ranges; usbhsohci: ohci@4a064800 { - compatible = "ti,ohci-omap3", "usb-ohci"; + compatible = "ti,ohci-omap3"; reg = <0x4a064800 0x400>; interrupt-parent = <&gic>; interrupts = <0 76 0x4>; }; usbhsehci: ehci@4a064c00 { - compatible = "ti,ehci-omap", "usb-ehci"; + compatible = "ti,ehci-omap"; reg = <0x4a064c00 0x400>; interrupt-parent = <&gic>; interrupts = <0 77 0x4>; diff --git a/dts/Bindings/mfd/qcom,pm8008.yaml b/dts/Bindings/mfd/qcom,pm8008.yaml index ec3138c1bb..0c75d8bde5 100644 --- a/dts/Bindings/mfd/qcom,pm8008.yaml +++ b/dts/Bindings/mfd/qcom,pm8008.yaml @@ -4,10 +4,10 @@ $id: http://devicetree.org/schemas/mfd/qcom,pm8008.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Qualcomm Technologies, Inc. PM8008 PMIC bindings +title: Qualcomm Technologies, Inc. PM8008 PMIC maintainers: - - Guru Das Srinagesh <gurus@codeaurora.org> + - Guru Das Srinagesh <quic_gurus@quicinc.com> description: | Qualcomm Technologies, Inc. PM8008 is a dedicated camera PMIC that integrates @@ -99,10 +99,12 @@ examples: - | #include <dt-bindings/mfd/qcom-pm8008.h> #include <dt-bindings/interrupt-controller/irq.h> - qupv3_se13_i2c { + + i2c { #address-cells = <1>; #size-cells = <0>; - pm8008i@8 { + + pmic@8 { compatible = "qcom,pm8008"; reg = <0x8>; #address-cells = <1>; diff --git a/dts/Bindings/mfd/qcom,spmi-pmic.yaml b/dts/Bindings/mfd/qcom,spmi-pmic.yaml index 65cbc6dee5..8103fb61a1 100644 --- a/dts/Bindings/mfd/qcom,spmi-pmic.yaml +++ b/dts/Bindings/mfd/qcom,spmi-pmic.yaml @@ -33,44 +33,67 @@ properties: compatible: items: - enum: - - qcom,pm660 - - qcom,pm660l + - qcom,pm2250 + - qcom,pm6125 - qcom,pm6150 - qcom,pm6150l - qcom,pm6350 + - qcom,pm660 + - qcom,pm660l + - qcom,pm7250b + - qcom,pm7550ba - qcom,pm7325 - qcom,pm8004 - qcom,pm8005 - qcom,pm8009 + - qcom,pm8010 - qcom,pm8019 + - qcom,pm8028 - qcom,pm8110 - qcom,pm8150 - qcom,pm8150b + - qcom,pm8150c - qcom,pm8150l - qcom,pm8226 - qcom,pm8350 - qcom,pm8350b - qcom,pm8350c + - qcom,pm8450 + - qcom,pm8550 + - qcom,pm8550b + - qcom,pm8550ve + - qcom,pm8550vs - qcom,pm8841 - qcom,pm8909 - qcom,pm8916 + - qcom,pm8937 - qcom,pm8941 - qcom,pm8950 + - qcom,pm8953 - qcom,pm8994 - qcom,pm8998 - qcom,pma8084 + - qcom,pmc8180 + - qcom,pmc8180c - qcom,pmd9635 + - qcom,pmi632 - qcom,pmi8950 - qcom,pmi8962 - qcom,pmi8994 - qcom,pmi8998 + - qcom,pmk8002 - qcom,pmk8350 + - qcom,pmk8550 - qcom,pmm8155au + - qcom,pmm8654au + - qcom,pmp8074 - qcom,pmr735a - qcom,pmr735b + - qcom,pmr735d - qcom,pms405 - qcom,pmx55 - qcom,pmx65 + - qcom,pmx75 - qcom,smb2351 - const: qcom,spmi-pmic @@ -90,36 +113,60 @@ properties: regulators: type: object - $ref: /schemas/regulator/regulator.yaml# + $ref: /schemas/regulator/qcom,spmi-regulator.yaml# + + pwm: + type: object + $ref: /schemas/leds/leds-qcom-lpg.yaml# patternProperties: "^adc@[0-9a-f]+$": type: object - $ref: /schemas/iio/adc/qcom,spmi-vadc.yaml# + oneOf: + - $ref: /schemas/iio/adc/qcom,spmi-iadc.yaml# + - $ref: /schemas/iio/adc/qcom,spmi-rradc.yaml# + - $ref: /schemas/iio/adc/qcom,spmi-vadc.yaml# "^adc-tm@[0-9a-f]+$": type: object - $ref: /schemas/thermal/qcom-spmi-adc-tm5.yaml# + # ref depends on compatible, see allOf below "^audio-codec@[0-9a-f]+$": type: object - additionalProperties: true # FIXME qcom,pm8916-wcd-analog-codec binding not converted yet + $ref: /schemas/sound/qcom,pm8916-wcd-analog-codec.yaml# - "extcon@[0-9a-f]+$": + "^battery@[0-9a-f]+$": type: object - $ref: /schemas/extcon/qcom,pm8941-misc.yaml# + oneOf: + - $ref: /schemas/power/supply/qcom,pm8916-bms-vm.yaml# - "gpio(s)?@[0-9a-f]+$": + "^charger@[0-9a-f]+$": + type: object + oneOf: + - $ref: /schemas/power/supply/qcom,pm8916-lbc.yaml# + - $ref: /schemas/power/supply/qcom,pm8941-charger.yaml# + - $ref: /schemas/power/supply/qcom,pm8941-coincell.yaml# + - $ref: /schemas/power/supply/qcom,pmi8998-charger.yaml# + + "gpio@[0-9a-f]+$": type: object $ref: /schemas/pinctrl/qcom,pmic-gpio.yaml# - "pon@[0-9a-f]+$": + "^led-controller@[0-9a-f]+$": type: object - $ref: /schemas/power/reset/qcom,pon.yaml# + $ref: /schemas/leds/qcom,spmi-flash-led.yaml# - "pwm@[0-9a-f]+$": + "^nvram@[0-9a-f]+$": type: object - $ref: /schemas/leds/leds-qcom-lpg.yaml# + $ref: /schemas/nvmem/qcom,spmi-sdam.yaml# + + "phy@[0-9a-f]+$": + type: object + $ref: /schemas/phy/qcom,snps-eusb2-repeater.yaml# + + "pon@[0-9a-f]+$": + type: object + $ref: /schemas/power/reset/qcom,pon.yaml# "^rtc@[0-9a-f]+$": type: object @@ -129,9 +176,21 @@ patternProperties: type: object $ref: /schemas/thermal/qcom,spmi-temp-alarm.yaml# + "^typec@[0-9a-f]+$": + type: object + $ref: /schemas/usb/qcom,pmic-typec.yaml# + + "^usb-detect@[0-9a-f]+$": + type: object + $ref: /schemas/extcon/qcom,pm8941-misc.yaml# + + "^usb-vbus-regulator@[0-9a-f]+$": + type: object + $ref: /schemas/regulator/qcom,usb-vbus-regulator.yaml# + "^vibrator@[0-9a-f]+$": type: object - additionalProperties: true # FIXME qcom,pm8916-vib binding not converted yet + $ref: /schemas/input/qcom,pm8xxx-vib.yaml# "^mpps@[0-9a-f]+$": type: object @@ -146,6 +205,22 @@ required: - compatible - reg +allOf: + - if: + properties: + compatible: + contains: + enum: + - qcom,pm8998 + then: + patternProperties: + "^adc-tm@[0-9a-f]+$": + $ref: /schemas/thermal/qcom-spmi-adc-tm-hc.yaml# + else: + patternProperties: + "^adc-tm@[0-9a-f]+$": + $ref: /schemas/thermal/qcom-spmi-adc-tm5.yaml# + additionalProperties: false examples: @@ -171,13 +246,13 @@ examples: interrupt-controller; #interrupt-cells = <4>; - pmi8998_lsid0: pmic@2 { + pmic@2 { compatible = "qcom,pmi8998", "qcom,spmi-pmic"; reg = <0x2 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; - pmi8998_gpio: gpios@c000 { + gpio@c000 { compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; @@ -188,3 +263,87 @@ examples: }; }; }; + + - | + #include <dt-bindings/input/input.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/iio/qcom,spmi-vadc.h> + #include <dt-bindings/spmi/spmi.h> + + pmic@0 { + compatible = "qcom,pm6150", "qcom,spmi-pmic"; + reg = <0x0 SPMI_USID>; + #address-cells = <1>; + #size-cells = <0>; + + pon@800 { + compatible = "qcom,pm8998-pon"; + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + }; + + temp-alarm@2400 { + compatible = "qcom,spmi-temp-alarm"; + reg = <0x2400>; + interrupts = <0x0 0x24 0x0 IRQ_TYPE_EDGE_RISING>; + io-channels = <&pm6150_adc ADC5_DIE_TEMP>; + io-channel-names = "thermal"; + #thermal-sensor-cells = <0>; + }; + + pm6150_adc: adc@3100 { + compatible = "qcom,spmi-adc5"; + reg = <0x3100>; + interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>; + #address-cells = <1>; + #size-cells = <0>; + #io-channel-cells = <1>; + + channel@6 { + reg = <ADC5_DIE_TEMP>; + label = "die_temp"; + }; + + channel@4f { + reg = <ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time = <200>; + }; + }; + + adc-tm@3500 { + compatible = "qcom,spmi-adc-tm5"; + reg = <0x3500>; + interrupts = <0x0 0x35 0x0 IRQ_TYPE_EDGE_RISING>; + #thermal-sensor-cells = <1>; + #address-cells = <1>; + #size-cells = <0>; + + charger-thermistor@0 { + reg = <0>; + io-channels = <&pm6150_adc ADC5_AMUX_THM3_100K_PU>; + qcom,ratiometric; + qcom,hw-settle-time-us = <200>; + }; + }; + + gpio@c000 { + compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio"; + reg = <0xc000>; + gpio-controller; + gpio-ranges = <&pm6150_gpio 0 0 10>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + }; diff --git a/dts/Bindings/mfd/qcom,tcsr.yaml b/dts/Bindings/mfd/qcom,tcsr.yaml index 2f816fd0c9..b97d770153 100644 --- a/dts/Bindings/mfd/qcom,tcsr.yaml +++ b/dts/Bindings/mfd/qcom,tcsr.yaml @@ -15,23 +15,41 @@ description: properties: compatible: - oneOf: - - items: - - enum: - - qcom,tcsr-apq8064 - - qcom,tcsr-apq8084 - - qcom,tcsr-ipq8064 - - qcom,tcsr-mdm9615 - - qcom,tcsr-msm8660 - - qcom,tcsr-msm8916 - - qcom,tcsr-msm8953 - - qcom,tcsr-msm8960 - - qcom,tcsr-msm8974 - - const: syscon - - items: - - const: qcom,tcsr-ipq6018 - - const: syscon - - const: simple-mfd + items: + - enum: + - qcom,msm8976-tcsr + - qcom,msm8998-tcsr + - qcom,qcm2290-tcsr + - qcom,qcs404-tcsr + - qcom,sc7180-tcsr + - qcom,sc7280-tcsr + - qcom,sc8280xp-tcsr + - qcom,sdm630-tcsr + - qcom,sdm845-tcsr + - qcom,sdx55-tcsr + - qcom,sdx65-tcsr + - qcom,sm4450-tcsr + - qcom,sm6115-tcsr + - qcom,sm8150-tcsr + - qcom,sm8250-tcsr + - qcom,sm8350-tcsr + - qcom,sm8450-tcsr + - qcom,tcsr-apq8064 + - qcom,tcsr-apq8084 + - qcom,tcsr-ipq5332 + - qcom,tcsr-ipq6018 + - qcom,tcsr-ipq8064 + - qcom,tcsr-ipq8074 + - qcom,tcsr-ipq9574 + - qcom,tcsr-mdm9615 + - qcom,tcsr-msm8226 + - qcom,tcsr-msm8660 + - qcom,tcsr-msm8916 + - qcom,tcsr-msm8953 + - qcom,tcsr-msm8960 + - qcom,tcsr-msm8974 + - qcom,tcsr-msm8996 + - const: syscon reg: maxItems: 1 diff --git a/dts/Bindings/mfd/qcom-pm8xxx.yaml b/dts/Bindings/mfd/qcom-pm8xxx.yaml index 61bd0b3ce0..7fe3875a59 100644 --- a/dts/Bindings/mfd/qcom-pm8xxx.yaml +++ b/dts/Bindings/mfd/qcom-pm8xxx.yaml @@ -15,11 +15,15 @@ description: | properties: compatible: - enum: - - qcom,pm8018 - - qcom,pm8058 - - qcom,pm8821 - - qcom,pm8921 + oneOf: + - enum: + - qcom,pm8058 + - qcom,pm8821 + - qcom,pm8921 + - items: + - enum: + - qcom,pm8018 + - const: qcom,pm8921 reg: maxItems: 1 @@ -39,9 +43,37 @@ properties: interrupt-controller: true patternProperties: + "gpio@[0-9a-f]+$": + type: object + $ref: /schemas/pinctrl/qcom,pmic-gpio.yaml# + + "keypad@[0-9a-f]+$": + type: object + $ref: /schemas/input/qcom,pm8921-keypad.yaml# + + "led@[0-9a-f]+$": + type: object + $ref: /schemas/leds/qcom,pm8058-led.yaml# + + "mpps@[0-9a-f]+$": + type: object + $ref: /schemas/pinctrl/qcom,pmic-mpp.yaml# + + "pwrkey@[0-9a-f]+$": + type: object + $ref: /schemas/input/qcom,pm8921-pwrkey.yaml# + "rtc@[0-9a-f]+$": type: object - $ref: "../rtc/qcom-pm8xxx-rtc.yaml" + $ref: /schemas/rtc/qcom-pm8xxx-rtc.yaml# + + "vibrator@[0-9a-f]+$": + type: object + $ref: /schemas/input/qcom,pm8xxx-vib.yaml# + + "xoadc@[0-9a-f]+$": + type: object + $ref: /schemas/iio/adc/qcom,pm8018-adc.yaml# required: - compatible @@ -52,4 +84,23 @@ required: - interrupt-controller additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + ssbi { + #address-cells = <1>; + #size-cells = <0>; + pmic@0 { + compatible = "qcom,pm8921"; + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-controller; + #interrupt-cells = <2>; + + interrupt-parent = <&tlmm>; + interrupts = <32 IRQ_TYPE_EDGE_RISING>; + }; + }; ... diff --git a/dts/Bindings/mfd/qcom-rpm.txt b/dts/Bindings/mfd/qcom-rpm.txt deleted file mode 100644 index b823b86252..0000000000 --- a/dts/Bindings/mfd/qcom-rpm.txt +++ /dev/null @@ -1,283 +0,0 @@ -Qualcomm Resource Power Manager (RPM) - -This driver is used to interface with the Resource Power Manager (RPM) found in -various Qualcomm platforms. The RPM allows each component in the system to vote -for state of the system resources, such as clocks, regulators and bus -frequencies. - -- compatible: - Usage: required - Value type: <string> - Definition: must be one of: - "qcom,rpm-apq8064" - "qcom,rpm-msm8660" - "qcom,rpm-msm8960" - "qcom,rpm-ipq8064" - "qcom,rpm-mdm9615" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: base address and size of the RPM's message ram - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: three entries specifying the RPM's: - 1. acknowledgement interrupt - 2. error interrupt - 3. wakeup interrupt - -- interrupt-names: - Usage: required - Value type: <string-array> - Definition: must be the three strings "ack", "err" and "wakeup", in order - -- qcom,ipc: - Usage: required - Value type: <prop-encoded-array> - - Definition: three entries specifying the outgoing ipc bit used for - signaling the RPM: - - phandle to a syscon node representing the apcs registers - - u32 representing offset to the register within the syscon - - u32 representing the ipc bit within the register - - -= SUBNODES - -The RPM exposes resources to its subnodes. The below bindings specify the set -of valid subnodes that can operate on these resources. - -== Regulators - -Regulator nodes are identified by their compatible: - -- compatible: - Usage: required - Value type: <string> - Definition: must be one of: - "qcom,rpm-pm8058-regulators" - "qcom,rpm-pm8901-regulators" - "qcom,rpm-pm8921-regulators" - "qcom,rpm-pm8018-regulators" - "qcom,rpm-smb208-regulators" - -- vdd_l0_l1_lvs-supply: -- vdd_l2_l11_l12-supply: -- vdd_l3_l4_l5-supply: -- vdd_l6_l7-supply: -- vdd_l8-supply: -- vdd_l9-supply: -- vdd_l10-supply: -- vdd_l13_l16-supply: -- vdd_l14_l15-supply: -- vdd_l17_l18-supply: -- vdd_l19_l20-supply: -- vdd_l21-supply: -- vdd_l22-supply: -- vdd_l23_l24_l25-supply: -- vdd_ncp-supply: -- vdd_s0-supply: -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_s4-supply: - Usage: optional (pm8058 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -- lvs0_in-supply: -- lvs1_in-supply: -- lvs2_in-supply: -- lvs3_in-supply: -- mvs_in-supply: -- vdd_l0-supply: -- vdd_l1-supply: -- vdd_l2-supply: -- vdd_l3-supply: -- vdd_l4-supply: -- vdd_l5-supply: -- vdd_l6-supply: -- vdd_s0-supply: -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_s4-supply: - Usage: optional (pm8901 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -- vdd_l1_l2_l12_l18-supply: -- vdd_l3_l15_l17-supply: -- vdd_l4_l14-supply: -- vdd_l5_l8_l16-supply: -- vdd_l6_l7-supply: -- vdd_l9_l11-supply: -- vdd_l10_l22-supply: -- vdd_l21_l23_l29-supply: -- vdd_l24-supply: -- vdd_l25-supply: -- vdd_l26-supply: -- vdd_l27-supply: -- vdd_l28-supply: -- vdd_ncp-supply: -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s4-supply: -- vdd_s5-supply: -- vdd_s6-supply: -- vdd_s7-supply: -- vdd_s8-supply: -- vin_5vs-supply: -- vin_lvs1_3_6-supply: -- vin_lvs2-supply: -- vin_lvs4_5_7-supply: - Usage: optional (pm8921 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -- vin_lvs1-supply: -- vdd_l7-supply: -- vdd_l8-supply: -- vdd_l9_l10_l11_l12-supply: - Usage: optional (pm8018 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -The regulator node houses sub-nodes for each regulator within the device. Each -sub-node is identified using the node's name, with valid values listed for each -of the pmics below. - -pm8058: - l0, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, - l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, s0, s1, s2, s3, s4, - lvs0, lvs1, ncp - -pm8901: - l0, l1, l2, l3, l4, l5, l6, s0, s1, s2, s3, s4, lvs0, lvs1, lvs2, lvs3, - mvs - -pm8921: - s1, s2, s3, s4, s7, s8, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, - l12, l14, l15, l16, l17, l18, l21, l22, l23, l24, l25, l26, l27, l28, - l29, lvs1, lvs2, lvs3, lvs4, lvs5, lvs6, lvs7, usb-switch, hdmi-switch, - ncp - -pm8018: - s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, - l12, l14, lvs1 - -smb208: - s1a, s1b, s2a, s2b - -The content of each sub-node is defined by the standard binding for regulators - -see regulator.txt - with additional custom properties described below: - -=== Switch-mode Power Supply regulator custom properties - -- bias-pull-down: - Usage: optional - Value type: <empty> - Definition: enable pull down of the regulator when inactive - -- qcom,switch-mode-frequency: - Usage: required - Value type: <u32> - Definition: Frequency (Hz) of the switch-mode power supply; - must be one of: - 19200000, 9600000, 6400000, 4800000, 3840000, 3200000, - 2740000, 2400000, 2130000, 1920000, 1750000, 1600000, - 1480000, 1370000, 1280000, 1200000 - -- qcom,force-mode: - Usage: optional (default if no other qcom,force-mode is specified) - Value type: <u32> - Definition: indicates that the regulator should be forced to a - particular mode, valid values are: - QCOM_RPM_FORCE_MODE_NONE - do not force any mode - QCOM_RPM_FORCE_MODE_LPM - force into low power mode - QCOM_RPM_FORCE_MODE_HPM - force into high power mode - QCOM_RPM_FORCE_MODE_AUTO - allow regulator to automatically - select its own mode based on - realtime current draw, only for: - pm8921 smps and ftsmps - -- qcom,power-mode-hysteretic: - Usage: optional - Value type: <empty> - Definition: select that the power supply should operate in hysteretic - mode, instead of the default pwm mode - -=== Low-dropout regulator custom properties - -- bias-pull-down: - Usage: optional - Value type: <empty> - Definition: enable pull down of the regulator when inactive - -- qcom,force-mode: - Usage: optional - Value type: <u32> - Definition: indicates that the regulator should not be forced to any - particular mode, valid values are: - QCOM_RPM_FORCE_MODE_NONE - do not force any mode - QCOM_RPM_FORCE_MODE_LPM - force into low power mode - QCOM_RPM_FORCE_MODE_HPM - force into high power mode - QCOM_RPM_FORCE_MODE_BYPASS - set regulator to use bypass - mode, i.e. to act as a switch - and not regulate, only for: - pm8921 pldo, nldo and nldo1200 - -=== Negative Charge Pump custom properties - -- qcom,switch-mode-frequency: - Usage: required - Value type: <u32> - Definition: Frequency (Hz) of the switch mode power supply; - must be one of: - 19200000, 9600000, 6400000, 4800000, 3840000, 3200000, - 2740000, 2400000, 2130000, 1920000, 1750000, 1600000, - 1480000, 1370000, 1280000, 1200000 - -= EXAMPLE - - #include <dt-bindings/mfd/qcom-rpm.h> - - rpm@108000 { - compatible = "qcom,rpm-msm8960"; - reg = <0x108000 0x1000>; - qcom,ipc = <&apcs 0x8 2>; - - interrupts = <0 19 0>, <0 21 0>, <0 22 0>; - interrupt-names = "ack", "err", "wakeup"; - - regulators { - compatible = "qcom,rpm-pm8921-regulators"; - vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; - - s1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - bias-pull-down; - - qcom,switch-mode-frequency = <3200000>; - }; - - pm8921_s4: s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - - qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; - }; - }; - }; - diff --git a/dts/Bindings/mfd/richtek,rt5033.yaml b/dts/Bindings/mfd/richtek,rt5033.yaml new file mode 100644 index 0000000000..386b1a5015 --- /dev/null +++ b/dts/Bindings/mfd/richtek,rt5033.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/richtek,rt5033.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT5033 Power Management Integrated Circuit + +maintainers: + - Jakob Hauser <jahau@rocketmail.com> + +description: + RT5033 is a multifunction device which includes battery charger, fuel gauge, + flash LED current source, LDO and synchronous Buck converter for portable + applications. It is interfaced to host controller using I2C interface. The + battery fuel gauge uses a separate I2C bus. + +properties: + compatible: + const: richtek,rt5033 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + regulators: + description: + The regulators of RT5033 have to be instantiated under a sub-node named + "regulators". For SAFE_LDO voltage there is only one value of 4.9 V. LDO + voltage ranges from 1.2 V to 3.0 V in 0.1 V steps. BUCK voltage ranges + from 1.0 V to 3.0 V in 0.1 V steps. + type: object + patternProperties: + "^(SAFE_LDO|LDO|BUCK)$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + additionalProperties: false + + charger: + type: object + $ref: /schemas/power/supply/richtek,rt5033-charger.yaml# + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + battery: battery { + compatible = "simple-battery"; + precharge-current-microamp = <450000>; + constant-charge-current-max-microamp = <1000000>; + charge-term-current-microamp = <150000>; + precharge-upper-limit-microvolt = <3500000>; + constant-charge-voltage-max-microvolt = <4350000>; + }; + + extcon { + usb_con: connector { + compatible = "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + }; + }; + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + fuel-gauge@35 { + compatible = "richtek,rt5033-battery"; + reg = <0x35>; + + interrupt-parent = <&msmgpio>; + interrupts = <121 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&fg_alert_default>; + + power-supplies = <&rt5033_charger>; + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + pmic@34 { + compatible = "richtek,rt5033"; + reg = <0x34>; + + interrupt-parent = <&msmgpio>; + interrupts = <62 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_default>; + + regulators { + safe_ldo_reg: SAFE_LDO { + regulator-name = "SAFE_LDO"; + regulator-min-microvolt = <4900000>; + regulator-max-microvolt = <4900000>; + regulator-always-on; + }; + ldo_reg: LDO { + regulator-name = "LDO"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + buck_reg: BUCK { + regulator-name = "BUCK"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; + + rt5033_charger: charger { + compatible = "richtek,rt5033-charger"; + monitored-battery = <&battery>; + richtek,usb-connector = <&usb_con>; + }; + }; + }; + }; diff --git a/dts/Bindings/mfd/richtek,rt5120.yaml b/dts/Bindings/mfd/richtek,rt5120.yaml new file mode 100644 index 0000000000..f73b8b25d7 --- /dev/null +++ b/dts/Bindings/mfd/richtek,rt5120.yaml @@ -0,0 +1,178 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/richtek,rt5120.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT5120 PMIC + +maintainers: + - ChiYuan Huang <cy_huang@richtek.com> + +description: | + The RT5120 provides four high-efficiency buck converters and one LDO voltage + regulator. The device is targeted at providingthe processor voltage, memory, + I/O, and peripheral rails in home entertainment devices. The I2C interface is + used for dynamic voltage scaling of the processor voltage, power rails on/off + sequence control, operation mode selection. + +properties: + compatible: + enum: + - richtek,rt5120 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + wakeup-source: true + + richtek,enable-undervolt-hiccup: + type: boolean + description: | + If used, under voltage protection trigger hiccup behavior, else latchup as + default + + richtek,enable-overvolt-hiccup: + type: boolean + description: + Like as 'enable-uv-hiccup', it configures over voltage protection to + hiccup, else latchup as default + + vin1-supply: + description: phandle for buck1 input power source + + vin2-supply: + description: phandle for buck2 input power source + + vin3-supply: + description: phandle for buck3 input power source + + vin4-supply: + description: phandle for buck4 input power source + + vinldo-supply: + description: phandle for ldo input power source + + regulators: + type: object + + patternProperties: + "^buck[1-4]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + properties: + regulator-allowed-modes: + description: | + Used to specify the allowed buck converter operating mode + mode mapping: + 0: auto mode + 1: force pwm mode + items: + enum: [0, 1] + + "^(ldo|exten)$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + additionalProperties: false + + powerkey: + type: object + description: + PON key that connected to RT5120 PMIC. + + properties: + compatible: + enum: + - richtek,rt5120-pwrkey + + required: + - compatible + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - '#interrupt-cells' + - interrupt-controller + - regulators + - powerkey + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@62 { + compatible = "richtek,rt5120"; + reg = <0x62>; + interrupts-extended = <&gpio_intc 32 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <1>; + wakeup-source; + + regulators { + buck1 { + regulator-name = "rt5120-buck1"; + regulator-min-microvolt = <600000>; + regulator-max-microvolt = <1393750>; + regulator-allowed-modes = <0 1>; + regulator-boot-on; + }; + buck2 { + regulator-name = "rt5120-buck2"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + }; + buck3 { + regulator-name = "rt5120-buck3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + }; + buck4 { + regulator-name = "rt5120-buck4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-allowed-modes = <0 1>; + regulator-always-on; + }; + ldo { + regulator-name = "rt5120-ldo"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + exten { + regulator-name = "rt5120-exten"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + }; + powerkey { + compatible = "richtek,rt5120-pwrkey"; + }; + }; + }; diff --git a/dts/Bindings/mfd/rockchip,rk805.yaml b/dts/Bindings/mfd/rockchip,rk805.yaml index 4992f71b6f..44f8188360 100644 --- a/dts/Bindings/mfd/rockchip,rk805.yaml +++ b/dts/Bindings/mfd/rockchip,rk805.yaml @@ -42,9 +42,12 @@ properties: rockchip,system-power-controller: type: boolean + deprecated: true description: Telling whether or not this PMIC is controlling the system power. + system-power-controller: true + wakeup-source: type: boolean description: @@ -80,6 +83,7 @@ properties: "^(DCDC_REG[1-4]|LDO_REG[1-3])$": type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false unevaluatedProperties: false allOf: diff --git a/dts/Bindings/mfd/rockchip,rk806.yaml b/dts/Bindings/mfd/rockchip,rk806.yaml new file mode 100644 index 0000000000..3c2b06629b --- /dev/null +++ b/dts/Bindings/mfd/rockchip,rk806.yaml @@ -0,0 +1,408 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk806.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK806 Power Management Integrated Circuit + +maintainers: + - Sebastian Reichel <sebastian.reichel@collabora.com> + +description: + Rockchip RK806 series PMIC. This device consists of an spi or + i2c controlled MFD that includes multiple switchable regulators. + +properties: + compatible: + enum: + - rockchip,rk806 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + system-power-controller: true + + vcc1-supply: + description: + The input supply for dcdc-reg1. + + vcc2-supply: + description: + The input supply for dcdc-reg2. + + vcc3-supply: + description: + The input supply for dcdc-reg3. + + vcc4-supply: + description: + The input supply for dcdc-reg4. + + vcc5-supply: + description: + The input supply for dcdc-reg5. + + vcc6-supply: + description: + The input supply for dcdc-reg6. + + vcc7-supply: + description: + The input supply for dcdc-reg7. + + vcc8-supply: + description: + The input supply for dcdc-reg8. + + vcc9-supply: + description: + The input supply for dcdc-reg9. + + vcc10-supply: + description: + The input supply for dcdc-reg10. + + vcc11-supply: + description: + The input supply for pldo-reg1, pldo-reg2 and pldo-reg3. + + vcc12-supply: + description: + The input supply for pldo-reg4 and pldo-reg5. + + vcc13-supply: + description: + The input supply for nldo-reg1, nldo-reg2 and nldo-reg3. + + vcc14-supply: + description: + The input supply for nldo-reg4 and nldo-reg5. + + vcca-supply: + description: + The input supply for pldo-reg6. + + regulators: + type: object + additionalProperties: false + patternProperties: + "^(dcdc-reg([1-9]|10)|pldo-reg[1-6]|nldo-reg[1-5])$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + +patternProperties: + '-pins$': + type: object + additionalProperties: false + $ref: /schemas/pinctrl/pinmux-node.yaml + + properties: + function: + enum: [pin_fun0, pin_fun1, pin_fun2, pin_fun3, pin_fun4, pin_fun5] + + pins: + $ref: /schemas/types.yaml#/definitions/string + enum: [gpio_pwrctrl1, gpio_pwrctrl2, gpio_pwrctrl3] + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/rockchip.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc5v0_sys>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + regulators { + vdd_gpu_s0: dcdc-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_npu_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_npu_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_log_s0"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu_mem_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_npu_mem_s0: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_npu_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_2v0_pldo_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vdd_vdenc_mem_s0: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd2_ddr_s3: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v1_nldo_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1100000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "avcc_1v8_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd1_1v8_ddr_s3: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd1_1v8_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_1v8_s3: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_1v8_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vccio_sd_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + master_pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "master_pldo6_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_0v75_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd2l_0v9_ddr_s3: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd2l_0v9_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + master_nldo3: nldo-reg3 { + regulator-name = "master_nldo3"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + avdd_0v75_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "avdd_0v75_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_0v85_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + }; diff --git a/dts/Bindings/mfd/rockchip,rk808.yaml b/dts/Bindings/mfd/rockchip,rk808.yaml index f5908fa01a..d2ac6fbd5c 100644 --- a/dts/Bindings/mfd/rockchip,rk808.yaml +++ b/dts/Bindings/mfd/rockchip,rk808.yaml @@ -37,9 +37,12 @@ properties: rockchip,system-power-controller: type: boolean + deprecated: true description: Telling whether or not this PMIC is controlling the system power. + system-power-controller: true + wakeup-source: type: boolean description: @@ -107,6 +110,7 @@ properties: "^(DCDC_REG[1-4]|LDO_REG[1-8]|SWITCH_REG[1-2])$": type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false unevaluatedProperties: false required: diff --git a/dts/Bindings/mfd/rockchip,rk809.yaml b/dts/Bindings/mfd/rockchip,rk809.yaml index 7fb849ac74..839c0521f1 100644 --- a/dts/Bindings/mfd/rockchip,rk809.yaml +++ b/dts/Bindings/mfd/rockchip,rk809.yaml @@ -37,9 +37,12 @@ properties: rockchip,system-power-controller: type: boolean + deprecated: true description: Telling whether or not this PMIC is controlling the system power. + system-power-controller: true + wakeup-source: type: boolean description: @@ -86,7 +89,8 @@ properties: patternProperties: "^(LDO_REG[1-9]|DCDC_REG[1-5]|SWITCH_REG[1-2])$": type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false unevaluatedProperties: false allOf: diff --git a/dts/Bindings/mfd/rockchip,rk817.yaml b/dts/Bindings/mfd/rockchip,rk817.yaml index bfc1720adc..92b1592e89 100644 --- a/dts/Bindings/mfd/rockchip,rk817.yaml +++ b/dts/Bindings/mfd/rockchip,rk817.yaml @@ -38,9 +38,12 @@ properties: rockchip,system-power-controller: type: boolean + deprecated: true description: Telling whether or not this PMIC is controlling the system power. + system-power-controller: true + wakeup-source: type: boolean description: @@ -87,6 +90,7 @@ properties: patternProperties: "^(LDO_REG[1-9]|DCDC_REG[1-4]|BOOST|OTG_SWITCH)$": type: object + unevaluatedProperties: false $ref: ../regulator/regulator.yaml# unevaluatedProperties: false @@ -111,12 +115,58 @@ properties: additional properties are required for the codec, this node can be omitted. type: object + additionalProperties: false properties: rockchip,mic-in-differential: type: boolean description: Describes if the microphone uses differential mode. + charger: + description: | + The child node for the charger to hold additional properties. If a + battery is not in use, this node can be omitted. + type: object + $ref: /schemas/power/supply/power-supply.yaml + + properties: + monitored-battery: + description: | + A phandle to a monitored battery node that contains a valid + value for: + charge-full-design-microamp-hours, + charge-term-current-microamp, + constant-charge-current-max-microamp, + constant-charge-voltage-max-microvolt, + voltage-max-design-microvolt, + voltage-min-design-microvolt, + and a valid ocv-capacity table. + + rockchip,resistor-sense-micro-ohms: + description: | + Value in microohms of the battery sense resistor. This value is + used by the driver to set the correct divisor value to translate + ADC readings into the proper units of measure. + enum: [10000, 20000] + + rockchip,sleep-enter-current-microamp: + description: | + Value in microamps of the sleep enter current for the charger. + Value is used by the driver to calibrate the relax threshold. + + rockchip,sleep-filter-current-microamp: + description: + Value in microamps of the sleep filter current for the charger. + Value is used by the driver to derive the sleep sample current. + + required: + - monitored-battery + - rockchip,resistor-sense-micro-ohms + - rockchip,sleep-enter-current-microamp + - rockchip,sleep-filter-current-microamp + + additionalProperties: false + allOf: - if: properties: @@ -323,6 +373,13 @@ examples: }; }; + rk817_charger: charger { + monitored-battery = <&battery>; + rockchip,resistor-sense-micro-ohms = <10000>; + rockchip,sleep-enter-current-microamp = <300000>; + rockchip,sleep-filter-current-microamp = <100000>; + }; + rk817_codec: codec { rockchip,mic-in-differential; }; diff --git a/dts/Bindings/mfd/rockchip,rk818.yaml b/dts/Bindings/mfd/rockchip,rk818.yaml index b57c4b005c..fd4b9de364 100644 --- a/dts/Bindings/mfd/rockchip,rk818.yaml +++ b/dts/Bindings/mfd/rockchip,rk818.yaml @@ -37,9 +37,12 @@ properties: rockchip,system-power-controller: type: boolean + deprecated: true description: Telling whether or not this PMIC is controlling the system power. + system-power-controller: true + wakeup-source: type: boolean description: @@ -99,6 +102,7 @@ properties: "^(DCDC_REG[1-4]|DCDC_BOOST|LDO_REG[1-9]|SWITCH_REG|HDMI_SWITCH|OTG_SWITCH)$": type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false unevaluatedProperties: false required: diff --git a/dts/Bindings/mfd/rohm,bd71815-pmic.yaml b/dts/Bindings/mfd/rohm,bd71815-pmic.yaml index fbface7206..05747e0125 100644 --- a/dts/Bindings/mfd/rohm,bd71815-pmic.yaml +++ b/dts/Bindings/mfd/rohm,bd71815-pmic.yaml @@ -4,10 +4,10 @@ $id: http://devicetree.org/schemas/mfd/rohm,bd71815-pmic.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: ROHM BD71815 Power Management Integrated Circuit bindings +title: ROHM BD71815 Power Management Integrated Circuit maintainers: - - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + - Matti Vaittinen <mazziesaccount@gmail.com> description: | BD71815AGW is a single-chip power management ICs for battery-powered @@ -46,7 +46,7 @@ properties: rohm,clkout-open-drain: description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos". - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1 diff --git a/dts/Bindings/mfd/rohm,bd71828-pmic.yaml b/dts/Bindings/mfd/rohm,bd71828-pmic.yaml index 8380166d17..11089aa89e 100644 --- a/dts/Bindings/mfd/rohm,bd71828-pmic.yaml +++ b/dts/Bindings/mfd/rohm,bd71828-pmic.yaml @@ -4,10 +4,10 @@ $id: http://devicetree.org/schemas/mfd/rohm,bd71828-pmic.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: ROHM BD71828 Power Management Integrated Circuit bindings +title: ROHM BD71828 Power Management Integrated Circuit maintainers: - - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + - Matti Vaittinen <mazziesaccount@gmail.com> description: | BD71828GW is a single-chip power management IC for battery-powered portable @@ -46,7 +46,7 @@ properties: rohm,clkout-open-drain: description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos". - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1 diff --git a/dts/Bindings/mfd/rohm,bd71837-pmic.yaml b/dts/Bindings/mfd/rohm,bd71837-pmic.yaml index 3bfdd33702..7aa343f58c 100644 --- a/dts/Bindings/mfd/rohm,bd71837-pmic.yaml +++ b/dts/Bindings/mfd/rohm,bd71837-pmic.yaml @@ -4,10 +4,10 @@ $id: http://devicetree.org/schemas/mfd/rohm,bd71837-pmic.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: ROHM BD71837 Power Management Integrated Circuit bindings +title: ROHM BD71837 Power Management Integrated Circuit maintainers: - - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + - Matti Vaittinen <mazziesaccount@gmail.com> description: | BD71837MWV is programmable Power Management ICs for powering single-core, diff --git a/dts/Bindings/mfd/rohm,bd71847-pmic.yaml b/dts/Bindings/mfd/rohm,bd71847-pmic.yaml index 5d531051a1..d783cc4e4e 100644 --- a/dts/Bindings/mfd/rohm,bd71847-pmic.yaml +++ b/dts/Bindings/mfd/rohm,bd71847-pmic.yaml @@ -4,10 +4,10 @@ $id: http://devicetree.org/schemas/mfd/rohm,bd71847-pmic.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: ROHM BD71847 and BD71850 Power Management Integrated Circuit bindings +title: ROHM BD71847 and BD71850 Power Management Integrated Circuit maintainers: - - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + - Matti Vaittinen <mazziesaccount@gmail.com> description: | BD71847AMWV and BD71850MWV are programmable Power Management ICs for powering @@ -130,7 +130,6 @@ dependencies: examples: - | #include <dt-bindings/interrupt-controller/irq.h> - #include <dt-bindings/leds/common.h> i2c { #address-cells = <1>; diff --git a/dts/Bindings/mfd/rohm,bd9576-pmic.yaml b/dts/Bindings/mfd/rohm,bd9576-pmic.yaml index 6483860da9..b7b323b1a4 100644 --- a/dts/Bindings/mfd/rohm,bd9576-pmic.yaml +++ b/dts/Bindings/mfd/rohm,bd9576-pmic.yaml @@ -4,10 +4,10 @@ $id: http://devicetree.org/schemas/mfd/rohm,bd9576-pmic.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: ROHM BD9576MUF and BD9573MUF Power Management Integrated Circuit bindings +title: ROHM BD9576MUF and BD9573MUF Power Management Integrated Circuit maintainers: - - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> + - Matti Vaittinen <mazziesaccount@gmail.com> description: | BD9576MUF and BD9573MUF are power management ICs primarily intended for @@ -34,7 +34,7 @@ properties: BD9576 and BD9573 VOUT1 regulator enable state can be individually controlled by a GPIO. This is dictated by state of vout1-en pin during the PMIC startup. If vout1-en is LOW during PMIC startup then the VOUT1 - enable sate is controlled via this pin. Set this property if vout1-en + enable state is controlled via this pin. Set this property if vout1-en is wired to be down at PMIC start-up. type: boolean @@ -61,7 +61,7 @@ properties: rohm,hw-timeout-ms: maxItems: 2 description: - Watchog timeout in milliseconds. If single value is given it is + Watchdog timeout in milliseconds. If single value is given it is the maximum timeout. Eg. if pinging watchdog is not done within this time limit the watchdog will be triggered. If two values are given watchdog is configured in "window mode". Then first value is limit for short-ping diff --git a/dts/Bindings/mfd/samsung,exynos5433-lpass.yaml b/dts/Bindings/mfd/samsung,exynos5433-lpass.yaml index b97b068487..f154103f32 100644 --- a/dts/Bindings/mfd/samsung,exynos5433-lpass.yaml +++ b/dts/Bindings/mfd/samsung,exynos5433-lpass.yaml @@ -85,7 +85,7 @@ examples: }; i2s@11440000 { - compatible = "samsung,exynos7-i2s"; + compatible = "samsung,exynos5433-i2s", "samsung,exynos7-i2s"; reg = <0x11440000 0x100>; dmas = <&adma 0>, <&adma 2>; dma-names = "tx", "rx"; diff --git a/dts/Bindings/mfd/samsung,s5m8767.yaml b/dts/Bindings/mfd/samsung,s5m8767.yaml index 10c7b408f3..aea0b7d57d 100644 --- a/dts/Bindings/mfd/samsung,s5m8767.yaml +++ b/dts/Bindings/mfd/samsung,s5m8767.yaml @@ -153,29 +153,18 @@ dependencies: additionalProperties: false allOf: - - if: + - not: required: - s5m8767,pmic-buck2-uses-gpio-dvs - then: - properties: - s5m8767,pmic-buck3-uses-gpio-dvs: false - s5m8767,pmic-buck4-uses-gpio-dvs: false - - - if: - required: - s5m8767,pmic-buck3-uses-gpio-dvs - then: - properties: - s5m8767,pmic-buck2-uses-gpio-dvs: false - s5m8767,pmic-buck4-uses-gpio-dvs: false - - - if: + - not: required: + - s5m8767,pmic-buck2-uses-gpio-dvs + - s5m8767,pmic-buck4-uses-gpio-dvs + - not: + required: + - s5m8767,pmic-buck3-uses-gpio-dvs - s5m8767,pmic-buck4-uses-gpio-dvs - then: - properties: - s5m8767,pmic-buck2-uses-gpio-dvs: false - s5m8767,pmic-buck3-uses-gpio-dvs: false examples: - | diff --git a/dts/Bindings/mfd/silergy,sy7636a.yaml b/dts/Bindings/mfd/silergy,sy7636a.yaml index 6de74c7016..ee0be32ac0 100644 --- a/dts/Bindings/mfd/silergy,sy7636a.yaml +++ b/dts/Bindings/mfd/silergy,sy7636a.yaml @@ -42,6 +42,7 @@ properties: vcom: type: object $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false description: The regulator for the compenstation voltage. Enabling/disabling this enables/disables the entire device. diff --git a/dts/Bindings/mfd/sprd,ums512-glbreg.yaml b/dts/Bindings/mfd/sprd,ums512-glbreg.yaml new file mode 100644 index 0000000000..a750fa23d7 --- /dev/null +++ b/dts/Bindings/mfd/sprd,ums512-glbreg.yaml @@ -0,0 +1,73 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright 2022 Unisoc Inc. +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/sprd,ums512-glbreg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Unisoc System Global Register + +maintainers: + - Orson Zhai <orsonzhai@gmail.com> + - Baolin Wang <baolin.wang7@gmail.com> + - Chunyan Zhang <zhang.lyra@gmail.com> + +description: + Unisoc system global registers provide register map + for clocks and some multimedia modules of the SoC. + +properties: + compatible: + items: + - enum: + - sprd,ums512-glbregs + - sprd,ums9620-glbregs + - const: syscon + - const: simple-mfd + + "#address-cells": + const: 1 + + "#size-cells": + const: 1 + + ranges: + maxItems: 1 + + reg: + maxItems: 1 + +patternProperties: + "^clock-controller@[0-9a-f]+$": + type: object + $ref: /schemas/clock/sprd,ums512-clk.yaml# + description: + Clock controller for the SoC clocks. + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + ap_apb_regs: syscon@71000000 { + compatible = "sprd,ums512-glbregs", "syscon", "simple-mfd"; + reg = <0x71000000 0x3000>; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x71000000 0x3000>; + + clock-controller@0 { + compatible = "sprd,ums512-apahb-gate"; + reg = <0x0 0x2000>; + #clock-cells = <1>; + }; + }; + + - | + ap_intc5_regs: syscon@32360000 { + compatible = "sprd,ums512-glbregs", "syscon", "simple-mfd"; + reg = <0x32360000 0x1000>; + }; diff --git a/dts/Bindings/mfd/st,stm32-lptimer.yaml b/dts/Bindings/mfd/st,stm32-lptimer.yaml index a58f08aa43..27329c5dc3 100644 --- a/dts/Bindings/mfd/st,stm32-lptimer.yaml +++ b/dts/Bindings/mfd/st,stm32-lptimer.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mfd/st,stm32-lptimer.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: STMicroelectronics STM32 Low-Power Timers bindings +title: STMicroelectronics STM32 Low-Power Timers description: | The STM32 Low-Power Timer (LPTIM) is a 16-bit timer that provides several @@ -46,6 +46,7 @@ properties: pwm: type: object + additionalProperties: false properties: compatible: @@ -60,6 +61,7 @@ properties: counter: type: object + additionalProperties: false properties: compatible: @@ -70,6 +72,7 @@ properties: timer: type: object + additionalProperties: false properties: compatible: @@ -81,6 +84,7 @@ properties: patternProperties: "^trigger@[0-9]+$": type: object + additionalProperties: false properties: compatible: diff --git a/dts/Bindings/mfd/st,stm32-timers.yaml b/dts/Bindings/mfd/st,stm32-timers.yaml index 5db00af8e1..f84e09a574 100644 --- a/dts/Bindings/mfd/st,stm32-timers.yaml +++ b/dts/Bindings/mfd/st,stm32-timers.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mfd/st,stm32-timers.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: STMicroelectronics STM32 Timers bindings +title: STMicroelectronics STM32 Timers description: | This hardware block provides 3 types of timer along with PWM functionality: @@ -69,6 +69,7 @@ properties: pwm: type: object + additionalProperties: false properties: compatible: @@ -104,6 +105,7 @@ properties: counter: type: object + additionalProperties: false properties: compatible: @@ -115,6 +117,7 @@ properties: patternProperties: "^timer@[0-9]+$": type: object + additionalProperties: false properties: compatible: diff --git a/dts/Bindings/mfd/st,stmfx.yaml b/dts/Bindings/mfd/st,stmfx.yaml index b2a4e4aa7f..76551c90b1 100644 --- a/dts/Bindings/mfd/st,stmfx.yaml +++ b/dts/Bindings/mfd/st,stmfx.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mfd/st,stmfx.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: STMicroelectonics Multi-Function eXpander (STMFX) bindings +title: STMicroelectonics Multi-Function eXpander (STMFX) description: ST Multi-Function eXpander (STMFX) is a slave controller using I2C for communication with the main MCU. Its main features are GPIO expansion, @@ -57,6 +57,7 @@ properties: patternProperties: "^[a-zA-Z]*-pins$": type: object + additionalProperties: false allOf: - $ref: ../pinctrl/pinmux-node.yaml diff --git a/dts/Bindings/mfd/st,stmpe.yaml b/dts/Bindings/mfd/st,stmpe.yaml new file mode 100644 index 0000000000..b77cc3f307 --- /dev/null +++ b/dts/Bindings/mfd/st,stmpe.yaml @@ -0,0 +1,297 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/st,stmpe.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectonics Port Expander (STMPE) + +description: STMicroelectronics Port Expander (STMPE) is a series of slow + bus controllers for various expanded peripherals such as GPIO, keypad, + touchscreen, ADC, PWM or rotator. It can contain one or several different + peripherals connected to SPI or I2C. + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - st,stmpe601 + - st,stmpe801 + - st,stmpe811 + - st,stmpe1600 + - st,stmpe1601 + - st,stmpe2401 + - st,stmpe2403 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vcc-supply: true + + vio-supply: true + + reset-gpios: + maxItems: 1 + + wakeup-source: true + + st,autosleep-timeout: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 4, 16, 32, 64, 128, 256, 512, 1024 ] + description: Time idle before going to automatic sleep to save power + + st,sample-time: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3, 4, 5, 6 ] + description: | + Sample time per iteration + 0 = 36 clock ticks + 1 = 44 clock ticks + 2 = 56 clock ticks + 3 = 64 clock ticks + 4 = 80 clock ticks - recommended + 5 = 96 clock ticks + 6 = 124 clock ticks + + st,mod-12b: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: ADC bit mode 0 = 10bit ADC, 1 = 12bit ADC + + st,ref-sel: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: ADC reference source 0 = internal, 1 = external + + st,adc-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + description: | + ADC clock speed + 0 = 1.625 MHz + 1 = 3.25 MHz + 2, 3 = 6.5 MHz + + adc: + type: object + $ref: /schemas/iio/adc/st,stmpe-adc.yaml# + + gpio: + type: object + $ref: /schemas/gpio/st,stmpe-gpio.yaml# + + keyboard-controller: + type: object + $ref: /schemas/input/matrix-keymap.yaml# + + unevaluatedProperties: false + + properties: + compatible: + const: st,stmpe-keypad + + debounce-interval: + description: Debouncing interval in milliseconds + $ref: /schemas/types.yaml#/definitions/uint32 + + st,no-autorepeat: + description: If present, the keys will not autorepeat when pressed + $ref: /schemas/types.yaml#/definitions/flag + + st,scan-count: + description: Scanning cycles elapsed before key data is updated + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - compatible + - linux,keymap + + pwm: + type: object + $ref: /schemas/pwm/pwm.yaml# + + unevaluatedProperties: false + + properties: + compatible: + const: st,stmpe-pwm + + "#pwm-cells": + const: 2 + + touchscreen: + type: object + $ref: /schemas/input/touchscreen/touchscreen.yaml# + + unevaluatedProperties: false + + properties: + compatible: + const: st,stmpe-ts + + st,ave-ctrl: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + description: | + Sample average control + 0 = 1 sample + 1 = 2 samples + 2 = 4 samples + 3 = 8 samples + + st,touch-det-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ] + description: | + Touch detection delay + 0 = 10 us + 1 = 50 us + 2 = 100 us + 3 = 500 us - recommended + 4 = 1 ms + 5 = 5 ms + 6 = 10 ms + 7 = 50 ms + + st,settling: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ] + description: | + Panel driver settling time + 0 = 10 us + 1 = 100 us + 2 = 500 us - recommended + 3 = 1 ms + 4 = 5 ms + 5 = 10 ms + 6 = 50 ms + 7 = 100 ms + + st,fraction-z: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ] + description: Length of the fractional part in z, recommended is 7 + (fraction-z ([0..7]) = Count of the fractional part) + + st,i-drive: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: | + current limit value of the touchscreen drivers + 0 = 20 mA (typical 35 mA max) + 1 = 50 mA (typical 80 mA max) + + required: + - compatible + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/input/input.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + port-expander@43 { + compatible = "st,stmpe2401"; + reg = <0x43>; + reset-gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio>; + vcc-supply = <&db8500_vsmps2_reg>; + vio-supply = <&db8500_vsmps2_reg>; + wakeup-source; + st,autosleep-timeout = <1024>; + + gpio { + compatible = "st,stmpe-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + st,norequest-mask = <0xf0f002>; + }; + + keyboard-controller { + compatible = "st,stmpe-keypad"; + debounce-interval = <64>; + st,scan-count = <8>; + st,no-autorepeat; + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = < + MATRIX_KEY(0x00, 0x00, KEY_1) + MATRIX_KEY(0x00, 0x01, KEY_2) + MATRIX_KEY(0x00, 0x02, KEY_3) + MATRIX_KEY(0x00, 0x03, KEY_4) + MATRIX_KEY(0x00, 0x04, KEY_5) + MATRIX_KEY(0x00, 0x05, KEY_6) + MATRIX_KEY(0x00, 0x06, KEY_7) + MATRIX_KEY(0x00, 0x07, KEY_8) + MATRIX_KEY(0x00, 0x08, KEY_9) + MATRIX_KEY(0x00, 0x09, KEY_0) + >; + }; + + pwm { + compatible = "st,stmpe-pwm"; + #pwm-cells = <2>; + }; + }; + + port-expander@41 { + compatible = "st,stmpe811"; + reg = <0x41>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio>; + st,adc-freq = <1>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,sample-time = <4>; + + adc { + compatible = "st,stmpe-adc"; + st,norequest-mask = <0x0f>; + #io-channel-cells = <1>; + }; + + gpio { + compatible = "st,stmpe-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pwm { + compatible = "st,stmpe-pwm"; + #pwm-cells = <2>; + }; + + touchscreen { + compatible = "st,stmpe-ts"; + st,ave-ctrl = <3>; + st,touch-det-delay = <5>; + st,settling = <3>; + st,fraction-z = <7>; + st,i-drive = <1>; + }; + }; + }; +... diff --git a/dts/Bindings/mfd/st,stpmic1.yaml b/dts/Bindings/mfd/st,stpmic1.yaml index 426658ad81..b17ebeb0a4 100644 --- a/dts/Bindings/mfd/st,stpmic1.yaml +++ b/dts/Bindings/mfd/st,stpmic1.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mfd/st,stpmic1.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: STMicroelectonics STPMIC1 Power Management IC bindings +title: STMicroelectonics STPMIC1 Power Management IC description: STMicroelectronics STPMIC1 Power Management IC @@ -106,6 +106,7 @@ properties: const: st,stpmic1-regulators ldo3: + $ref: /schemas/regulator/regulator.yaml type: object properties: @@ -128,6 +129,7 @@ properties: additionalProperties: false ldo4: + $ref: /schemas/regulator/regulator.yaml type: object properties: @@ -142,11 +144,14 @@ properties: regulator-name: true regulator-boot-on: true regulator-always-on: true + regulator-min-microvolt: true + regulator-max-microvolt: true regulator-over-current-protection: true additionalProperties: false vref_ddr: + $ref: /schemas/regulator/regulator.yaml type: object properties: @@ -165,6 +170,7 @@ properties: additionalProperties: false boost: + $ref: /schemas/regulator/regulator.yaml type: object properties: @@ -184,13 +190,11 @@ properties: additionalProperties: false patternProperties: - "^(buck[1-4]|ldo[1-6]|boost|pwr_sw[1-2])-supply$": + "^(buck[1-4]|ldo[1-6]|vref_ddr|boost|pwr_sw[1-2])-supply$": description: STPMIC1 voltage regulators supplies - "^(buck[1-4]|ldo[1-6]|boost|vref_ddr|pwr_sw[1-2])$": - $ref: ../regulator/regulator.yaml - "^ldo[1-2,5-6]$": + $ref: /schemas/regulator/regulator.yaml type: object properties: @@ -213,6 +217,7 @@ properties: additionalProperties: false "^buck[1-4]$": + $ref: /schemas/regulator/regulator.yaml type: object properties: @@ -237,6 +242,7 @@ properties: additionalProperties: false "^pwr_sw[1-2]$": + $ref: /schemas/regulator/regulator.yaml type: object properties: diff --git a/dts/Bindings/mfd/stericsson,ab8500.yaml b/dts/Bindings/mfd/stericsson,ab8500.yaml index 623a4b5cd2..94f9767a92 100644 --- a/dts/Bindings/mfd/stericsson,ab8500.yaml +++ b/dts/Bindings/mfd/stericsson,ab8500.yaml @@ -51,6 +51,7 @@ properties: provides the reference clock for the entire U8500 system and the DB8500 counterpart. type: object + additionalProperties: false properties: compatible: @@ -63,6 +64,7 @@ properties: description: Node describing the AB8500 GPIO controller. A few GPIO pins available for misc usage. type: object + additionalProperties: false properties: compatible: @@ -78,6 +80,7 @@ properties: rtc: description: Node describing the AB8500 battery-backed RTC. type: object + additionalProperties: false properties: compatible: @@ -310,7 +313,7 @@ properties: - const: audioclk stericsson,earpeice-cmv: - description: Earpeice voltage + description: Earpiece voltage $ref: /schemas/types.yaml#/definitions/uint32 enum: [ 950, 1100, 1270, 1580 ] @@ -334,57 +337,66 @@ properties: with power. ab8500_ldo_aux1: - description: The voltage for the auxilary LDO regulator 1 + description: The voltage for the auxiliary LDO regulator 1 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_aux2: - description: The voltage for the auxilary LDO regulator 2 + description: The voltage for the auxiliary LDO regulator 2 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_aux3: - description: The voltage for the auxilary LDO regulator 3 + description: The voltage for the auxiliary LDO regulator 3 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_aux4: - description: The voltage for the auxilary LDO regulator 4 + description: The voltage for the auxiliary LDO regulator 4 only present on AB8505 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_aux5: - description: The voltage for the auxilary LDO regulator 5 + description: The voltage for the auxiliary LDO regulator 5 only present on AB8505 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_aux6: - description: The voltage for the auxilary LDO regulator 6 + description: The voltage for the auxiliary LDO regulator 6 only present on AB8505 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false # There is never any AUX7 regulator which is confusing ab8500_ldo_aux8: - description: The voltage for the auxilary LDO regulator 8 + description: The voltage for the auxiliary LDO regulator 8 only present on AB8505 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_intcore: description: The LDO regulator for the internal core voltage of the AB8500 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_adc: description: Analog power regulator for the analog to digital converter ADC, only present on AB8505 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_tvout: description: The voltage for the TV output regulator, incidentally @@ -393,33 +405,39 @@ properties: Only present on AB8500. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_audio: description: The LDO regulator for the audio codec output type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_anamic1: description: The LDO regulator for the analog microphone 1 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_anamic2: description: The LDO regulator for the analog microphone 2 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_dmic: description: The LDO regulator for the digital microphone only present on AB8500 type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ldo_ana: description: Analog power regulator for CSI and DSI interfaces, Camera Serial Interface CSI and Display Serial Interface DSI. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false required: - compatible @@ -442,16 +460,19 @@ properties: description: The voltage for the VSMPS1 external regulator type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ext2: description: The voltage for the VSMPS2 external regulator type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false ab8500_ext3: description: The voltage for the VSMPS3 external regulator type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false required: - compatible @@ -462,6 +483,7 @@ patternProperties: "^pwm@[1-9]+?$": type: object $ref: ../pwm/pwm.yaml# + unevaluatedProperties: false description: Represents each of the PWM blocks in the AB8500 properties: diff --git a/dts/Bindings/mfd/stericsson,db8500-prcmu.yaml b/dts/Bindings/mfd/stericsson,db8500-prcmu.yaml index 1d4d88f7e8..cb2a42caab 100644 --- a/dts/Bindings/mfd/stericsson,db8500-prcmu.yaml +++ b/dts/Bindings/mfd/stericsson,db8500-prcmu.yaml @@ -72,44 +72,52 @@ properties: main voltage domain for the chip. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_varm: - description: The voltage for the ARM Cortex A-9 CPU. + description: The voltage for the ARM Cortex-A9 CPU. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_vmodem: description: The voltage for the modem subsystem. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_vpll: description: The voltage for the phase locked loop clocks. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_vsmps1: description: Also known as VIO12, is a step-down voltage regulator for 1.2V I/O. SMPS means System Management Power Source. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_vsmps2: description: Also known as VIO18, is a step-down voltage regulator for 1.8V I/O. SMPS means System Management Power Source. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_vsmps3: description: This is a step-down voltage regulator for 0.87 thru 1.875V I/O. SMPS means System Management Power Source. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_vrf1: - description: RF transciever voltage regulator. + description: RF transceiver voltage regulator. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_sva_mmdsp: description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP) @@ -117,18 +125,21 @@ properties: for video encoding and decoding. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_sva_mmdsp_ret: description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP) voltage regulator for retention mode. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_sva_pipe: description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP) voltage regulator for the data pipe. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_sia_mmdsp: description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP) @@ -136,18 +147,21 @@ properties: for image encoding and decoding. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_sia_mmdsp_ret: description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP) voltage regulator for retention mode. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_sia_pipe: description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP) voltage regulator for the data pipe. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_sga: description: Smart Graphics Accelerator (SGA) voltage regulator. @@ -155,6 +169,7 @@ properties: accelerator block. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_b2r2_mcde: description: Blit Blend Rotate and Rescale (B2R2), and Multi-Channel @@ -162,28 +177,33 @@ properties: blocks. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_esram12: description: Embedded Static RAM (ESRAM) 1 and 2 voltage regulator. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_esram12_ret: description: Embedded Static RAM (ESRAM) 1 and 2 voltage regulator for retention mode. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_esram34: description: Embedded Static RAM (ESRAM) 3 and 4 voltage regulator. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_esram34_ret: description: Embedded Static RAM (ESRAM) 3 and 4 voltage regulator for retention mode. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false required: - compatible diff --git a/dts/Bindings/mfd/stmpe.txt b/dts/Bindings/mfd/stmpe.txt deleted file mode 100644 index d4408a4171..0000000000 --- a/dts/Bindings/mfd/stmpe.txt +++ /dev/null @@ -1,42 +0,0 @@ -* ST Microelectronics STMPE Multi-Functional Device - -STMPE is an MFD device which may expose the following inbuilt devices: gpio, -keypad, touchscreen, adc, pwm, rotator. - -Required properties: - - compatible : "st,stmpe[610|801|811|1600|1601|2401|2403]" - - reg : I2C/SPI address of the device - -Optional properties: - - interrupts : The interrupt outputs from the controller - - interrupt-controller : Marks the device node as an interrupt controller - - wakeup-source : Marks the input device as wakable - - st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024 - - irq-gpio : If present, which GPIO to use for event IRQ - -Optional properties for devices with touch and ADC (STMPE811|STMPE610): - - st,sample-time : ADC conversion time in number of clock. - 0 -> 36 clocks 4 -> 80 clocks (recommended) - 1 -> 44 clocks 5 -> 96 clocks - 2 -> 56 clocks 6 -> 124 clocks - 3 -> 64 clocks - - st,mod-12b : ADC Bit mode - 0 -> 10bit ADC 1 -> 12bit ADC - - st,ref-sel : ADC reference source - 0 -> internal 1 -> external - - st,adc-freq : ADC Clock speed - 0 -> 1.625 MHz 2 || 3 -> 6.5 MHz - 1 -> 3.25 MHz - -Example: - - stmpe1601: stmpe1601@40 { - compatible = "st,stmpe1601"; - reg = <0x40>; - interrupts = <26 0x4>; - interrupt-parent = <&gpio6>; - interrupt-controller; - - wakeup-source; - st,autosleep-timeout = <1024>; - }; diff --git a/dts/Bindings/mfd/syscon.yaml b/dts/Bindings/mfd/syscon.yaml index c10f0b5772..9d55bee155 100644 --- a/dts/Bindings/mfd/syscon.yaml +++ b/dts/Bindings/mfd/syscon.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mfd/syscon.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: System Controller Registers R/W Device Tree Bindings +title: System Controller Registers R/W description: | System controller node represents a register region containing a set @@ -38,40 +38,51 @@ properties: - allwinner,sun8i-h3-system-controller - allwinner,sun8i-v3s-system-controller - allwinner,sun50i-a64-system-controller + - amd,pensando-elba-syscon - brcm,cru-clkset - freecom,fsg-cs2-system-controller + - fsl,imx93-aonmix-ns-syscfg + - fsl,imx93-wakeupmix-syscfg - hisilicon,dsa-subctrl - hisilicon,hi6220-sramctrl - hisilicon,pcie-sas-subctrl - hisilicon,peri-subctrl + - hpe,gxp-sysreg - intel,lgm-syscon + - loongson,ls1b-syscon + - loongson,ls1c-syscon - marvell,armada-3700-usb2-host-misc - mediatek,mt8135-pctl-a-syscfg - mediatek,mt8135-pctl-b-syscfg + - mediatek,mt8365-syscfg - microchip,lan966x-cpu-syscon - microchip,sparx5-cpu-syscon - mstar,msc313-pmsleep + - nuvoton,ma35d1-sys + - nuvoton,wpcm450-shm - rockchip,px30-qos - rockchip,rk3036-qos - rockchip,rk3066-qos + - rockchip,rk3128-qos - rockchip,rk3228-qos - rockchip,rk3288-qos - rockchip,rk3368-qos - rockchip,rk3399-qos - rockchip,rk3568-qos - - samsung,exynos3-sysreg - - samsung,exynos4-sysreg - - samsung,exynos5-sysreg - - samsung,exynos5433-sysreg - - samsung,exynos850-sysreg - - samsung,exynosautov9-sysreg + - rockchip,rk3588-qos + - rockchip,rv1126-qos + - starfive,jh7100-sysmain + - ti,am62-usb-phy-ctrl + - ti,am654-dss-oldi-io-ctrl + - ti,am654-serdes-ctrl + - ti,j784s4-pcie-ctrl - const: syscon - contains: const: syscon minItems: 2 - maxItems: 4 # Should be enough + maxItems: 5 # Should be enough reg: maxItems: 1 @@ -80,9 +91,11 @@ properties: description: | The size (in bytes) of the IO accesses that should be performed on the device. - $ref: /schemas/types.yaml#/definitions/uint32 enum: [1, 2, 4, 8] + resets: + maxItems: 1 + hwlocks: maxItems: 1 description: @@ -92,6 +105,18 @@ required: - compatible - reg +allOf: + - if: + properties: + compatible: + contains: + const: simple-mfd + then: + properties: + compatible: + minItems: 3 + maxItems: 5 + additionalProperties: true examples: diff --git a/dts/Bindings/mfd/ti,am3359-tscadc.yaml b/dts/Bindings/mfd/ti,am3359-tscadc.yaml index 34bf6a0143..70b5dfce07 100644 --- a/dts/Bindings/mfd/ti,am3359-tscadc.yaml +++ b/dts/Bindings/mfd/ti,am3359-tscadc.yaml @@ -52,14 +52,15 @@ properties: type: object description: Magnetic reader + power-domains: + maxItems: 1 + required: - compatible - reg - interrupts - clocks - clock-names - - dmas - - dma-names additionalProperties: false diff --git a/dts/Bindings/mfd/ti,j721e-system-controller.yaml b/dts/Bindings/mfd/ti,j721e-system-controller.yaml index 73cffc45e0..e6289fbe69 100644 --- a/dts/Bindings/mfd/ti,j721e-system-controller.yaml +++ b/dts/Bindings/mfd/ti,j721e-system-controller.yaml @@ -5,7 +5,7 @@ $id: http://devicetree.org/schemas/mfd/ti,j721e-system-controller.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: TI J721e System Controller Registers R/W Device Tree Bindings +title: TI J721e System Controller Registers R/W description: | This represents the Control Module registers (CTRL_MMR0) on the SoC. @@ -26,7 +26,9 @@ properties: compatible: items: - enum: + - ti,j7200-system-controller - ti,j721e-system-controller + - ti,j721s2-system-controller - const: syscon - const: simple-mfd @@ -54,6 +56,18 @@ patternProperties: description: Clock provider for TI EHRPWM nodes. + "phy@[0-9a-f]+$": + type: object + $ref: /schemas/phy/ti,phy-gmii-sel.yaml# + description: + The phy node corresponding to the ethernet MAC. + + "^chipid@[0-9a-f]+$": + type: object + $ref: /schemas/hwinfo/ti,k3-socinfo.yaml# + description: + The node corresponding to SoC chip identification. + required: - compatible - reg @@ -87,9 +101,14 @@ examples: }; clock-controller@4140 { - compatible = "ti,am654-ehrpwm-tbclk", "syscon"; + compatible = "ti,am654-ehrpwm-tbclk"; reg = <0x4140 0x18>; #clock-cells = <1>; }; + + chipid@14 { + compatible = "ti,am654-chipid"; + reg = <0x14 0x4>; + }; }; ... diff --git a/dts/Bindings/mfd/ti,lp87524-q1.yaml b/dts/Bindings/mfd/ti,lp87524-q1.yaml index f6cac4b107..ae149eb859 100644 --- a/dts/Bindings/mfd/ti,lp87524-q1.yaml +++ b/dts/Bindings/mfd/ti,lp87524-q1.yaml @@ -37,6 +37,7 @@ properties: "^buck[0123]$": type: object $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false required: - buck0 diff --git a/dts/Bindings/mfd/ti,lp87561-q1.yaml b/dts/Bindings/mfd/ti,lp87561-q1.yaml index dc5a29b5ef..5167d6eb90 100644 --- a/dts/Bindings/mfd/ti,lp87561-q1.yaml +++ b/dts/Bindings/mfd/ti,lp87561-q1.yaml @@ -41,6 +41,7 @@ properties: buck3210: type: object $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false required: - buck3210 diff --git a/dts/Bindings/mfd/ti,lp87565-q1.yaml b/dts/Bindings/mfd/ti,lp87565-q1.yaml index 012d251110..eca430edf6 100644 --- a/dts/Bindings/mfd/ti,lp87565-q1.yaml +++ b/dts/Bindings/mfd/ti,lp87565-q1.yaml @@ -47,6 +47,7 @@ properties: "^buck(10|23)$": type: object $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false required: - buck10 diff --git a/dts/Bindings/mfd/ti,nspire-misc.yaml b/dts/Bindings/mfd/ti,nspire-misc.yaml new file mode 100644 index 0000000000..28cd5164d4 --- /dev/null +++ b/dts/Bindings/mfd/ti,nspire-misc.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ti,nspire-misc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI Nspire MISC hardware block + +maintainers: + - Andrew Davis <afd@ti.com> + +description: + System controller node represents a register region containing a set + of miscellaneous registers. The registers are not cohesive enough to + represent as any specific type of device. Currently there is a reset + controller. + +properties: + compatible: + items: + - enum: + - ti,nspire-misc + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + reboot: + $ref: /schemas/power/reset/syscon-reboot.yaml# + +required: + - compatible + - reg + - reboot + +additionalProperties: false + +examples: + - | + misc: misc@900a0000 { + compatible = "ti,nspire-misc", "syscon", "simple-mfd"; + reg = <0x900a0000 0x1000>; + + reboot { + compatible = "syscon-reboot"; + offset = <0x08>; + value = <0x02>; + }; + }; diff --git a/dts/Bindings/mfd/ti,tps65086.yaml b/dts/Bindings/mfd/ti,tps65086.yaml index 6aeedda3be..bd36a07c17 100644 --- a/dts/Bindings/mfd/ti,tps65086.yaml +++ b/dts/Bindings/mfd/ti,tps65086.yaml @@ -38,6 +38,7 @@ properties: regulators: type: object + additionalProperties: false description: | List of child nodes that specify the regulator initialization data. Child nodes must be named after their hardware counterparts: @@ -94,7 +95,7 @@ required: examples: - | #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/Bindings/mfd/ti,tps6594.yaml b/dts/Bindings/mfd/ti,tps6594.yaml new file mode 100644 index 0000000000..9d43376beb --- /dev/null +++ b/dts/Bindings/mfd/ti,tps6594.yaml @@ -0,0 +1,193 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ti,tps6594.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TPS6594 Power Management Integrated Circuit + +maintainers: + - Julien Panis <jpanis@baylibre.com> + +description: + TPS6594 is a Power Management IC which provides regulators and others + features like GPIOs, RTC, watchdog, ESMs (Error Signal Monitor), and + PFSM (Pre-configurable Finite State Machine) managing the state of the device. + TPS6594 is the super-set device while TPS6593 and LP8764 are derivatives. + +properties: + compatible: + enum: + - ti,lp8764-q1 + - ti,tps6593-q1 + - ti,tps6594-q1 + + reg: + description: I2C slave address or SPI chip select number. + maxItems: 1 + + ti,primary-pmic: + type: boolean + description: | + Identify the primary PMIC on SPMI bus. + A multi-PMIC synchronization scheme is implemented in the PMIC device + to synchronize the power state changes with other PMIC devices. This is + accomplished through a SPMI bus: the primary PMIC is the controller + device on the SPMI bus, and the secondary PMICs are the target devices + on the SPMI bus. + + system-power-controller: true + + gpio-controller: true + + '#gpio-cells': + const: 2 + description: | + The first cell is the pin number, the second cell is used to specify flags. + See ../gpio/gpio.txt for more information. + + interrupts: + maxItems: 1 + + regulators: + type: object + description: List of regulators provided by this controller. + + patternProperties: + "^buck([1-5]|12|34|123|1234)$": + type: object + $ref: /schemas/regulator/regulator.yaml# + + unevaluatedProperties: false + + "^ldo[1-4]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + + unevaluatedProperties: false + + allOf: + - if: + required: + - buck12 + then: + properties: + buck123: false + buck1234: false + - if: + required: + - buck123 + then: + properties: + buck34: false + - if: + required: + - buck1234 + then: + properties: + buck34: false + + additionalProperties: false + +patternProperties: + "^buck([1-5]|12|34|123|1234)-supply$": + description: Input supply phandle for each buck. + + "^ldo[1-4]-supply$": + description: Input supply phandle for each ldo. + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + tps6593: pmic@48 { + compatible = "ti,tps6593-q1"; + reg = <0x48>; + ti,primary-pmic; + system-power-controller; + + gpio-controller; + #gpio-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&mcu_gpio0>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + + buck123-supply = <&vcc_3v3_sys>; + buck4-supply = <&vcc_3v3_sys>; + buck5-supply = <&vcc_3v3_sys>; + ldo1-supply = <&vcc_3v3_sys>; + ldo2-supply = <&vcc_3v3_sys>; + ldo3-supply = <&buck5>; + ldo4-supply = <&vcc_3v3_sys>; + + regulators { + buck123: buck123 { + regulator-name = "vcc_core"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + buck4: buck4 { + regulator-name = "vcc_1v1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: buck5 { + regulator-name = "vcc_1v8_sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: ldo1 { + regulator-name = "vddshv5_sdio"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2: ldo2 { + regulator-name = "vpp_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3: ldo3 { + regulator-name = "vcc_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: ldo4 { + regulator-name = "vdda_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + }; diff --git a/dts/Bindings/mfd/ti,twl.yaml b/dts/Bindings/mfd/ti,twl.yaml new file mode 100644 index 0000000000..52ed228fb1 --- /dev/null +++ b/dts/Bindings/mfd/ti,twl.yaml @@ -0,0 +1,69 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ti,twl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TWL family + +maintainers: + - Andreas Kemnade <andreas@kemnade.info> + +description: | + The TWLs are Integrated Power Management Chips. + Some version might contain much more analog function like + USB transceiver or Audio amplifier. + These chips are connected to an i2c bus. + +properties: + compatible: + description: + TWL4030 for integrated power-management/audio CODEC device used in OMAP3 + based boards + TWL6030/32 for integrated power-management used in OMAP4 based boards + enum: + - ti,twl4030 + - ti,twl6030 + - ti,twl6032 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + system-power-controller: true + + "#interrupt-cells": + const: 1 + + "#clock-cells": + const: 1 + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@48 { + compatible = "ti,twl6030"; + reg = <0x48>; + interrupts = <39>; /* IRQ_SYS_1N cascaded to gic */ + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + }; + }; + diff --git a/dts/Bindings/mfd/twl-family.txt b/dts/Bindings/mfd/twl-family.txt deleted file mode 100644 index c2f9302965..0000000000 --- a/dts/Bindings/mfd/twl-family.txt +++ /dev/null @@ -1,46 +0,0 @@ -Texas Instruments TWL family - -The TWLs are Integrated Power Management Chips. -Some version might contain much more analog function like -USB transceiver or Audio amplifier. -These chips are connected to an i2c bus. - - -Required properties: -- compatible : Must be "ti,twl4030"; - For Integrated power-management/audio CODEC device used in OMAP3 - based boards -- compatible : Must be "ti,twl6030"; - For Integrated power-management used in OMAP4 based boards -- interrupts : This i2c device has an IRQ line connected to the main SoC -- interrupt-controller : Since the twl support several interrupts internally, - it is considered as an interrupt controller cascaded to the SoC one. -- #interrupt-cells = <1>; - -Optional node: -- Child nodes contain in the twl. The twl family is made of several variants - that support a different number of features. - The children nodes will thus depend of the capability of the variant. - - -Example: -/* - * Integrated Power Management Chip - * https://www.ti.com/lit/ds/symlink/twl6030.pdf - */ -twl@48 { - compatible = "ti,twl6030"; - reg = <0x48>; - interrupts = <39>; /* IRQ_SYS_1N cascaded to gic */ - interrupt-controller; - #interrupt-cells = <1>; - interrupt-parent = <&gic>; - #address-cells = <1>; - #size-cells = <0>; - - twl_rtc { - compatible = "ti,twl_rtc"; - interrupts = <11>; - reg = <0>; - }; -}; diff --git a/dts/Bindings/mfd/wlf,arizona.yaml b/dts/Bindings/mfd/wlf,arizona.yaml index ea3337dafa..7902f3c5d2 100644 --- a/dts/Bindings/mfd/wlf,arizona.yaml +++ b/dts/Bindings/mfd/wlf,arizona.yaml @@ -156,7 +156,7 @@ properties: entry has a value that is out of range for a 16 bit register then the chip default will be used. If present exactly five values must be specified. - $ref: "/schemas/types.yaml#/definitions/uint32-array" + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 maxItems: 5 diff --git a/dts/Bindings/mfd/x-powers,ac100.yaml b/dts/Bindings/mfd/x-powers,ac100.yaml index de330c9869..f3d8394b27 100644 --- a/dts/Bindings/mfd/x-powers,ac100.yaml +++ b/dts/Bindings/mfd/x-powers,ac100.yaml @@ -1,10 +1,10 @@ # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- -$id: "http://devicetree.org/schemas/mfd/x-powers,ac100.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/mfd/x-powers,ac100.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# -title: X-Powers AC100 Device Tree Bindings +title: X-Powers AC100 maintainers: - Chen-Yu Tsai <wens@csie.org> diff --git a/dts/Bindings/mfd/x-powers,axp152.yaml b/dts/Bindings/mfd/x-powers,axp152.yaml index 3a53bae611..06f1779835 100644 --- a/dts/Bindings/mfd/x-powers,axp152.yaml +++ b/dts/Bindings/mfd/x-powers,axp152.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mfd/x-powers,axp152.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: X-Powers AXP PMIC Device Tree Bindings +title: X-Powers AXP PMIC maintainers: - Chen-Yu Tsai <wens@csie.org> @@ -47,9 +47,8 @@ allOf: - x-powers,axp209 then: - not: - required: - - x-powers,drive-vbus-en + properties: + x-powers,drive-vbus-en: false - if: not: @@ -59,39 +58,55 @@ allOf: const: x-powers,axp806 then: - allOf: - - not: - required: - - x-powers,self-working-mode - - - not: - required: - - x-powers,master-mode + properties: + x-powers,self-working-mode: false + x-powers,master-mode: false - if: not: properties: compatible: contains: - const: x-powers,axp305 + enum: + - x-powers,axp15060 + - x-powers,axp305 + - x-powers,axp313a then: required: - interrupts + - if: + properties: + compatible: + contains: + enum: + - x-powers,axp313a + - x-powers,axp15060 + + then: + properties: + x-powers,dcdc-freq: false + properties: compatible: oneOf: - enum: - x-powers,axp152 + - x-powers,axp192 - x-powers,axp202 - x-powers,axp209 - x-powers,axp221 - x-powers,axp223 + - x-powers,axp313a - x-powers,axp803 - x-powers,axp806 - x-powers,axp809 - x-powers,axp813 + - x-powers,axp15060 + - items: + - const: x-powers,axp228 + - const: x-powers,axp221 - items: - const: x-powers,axp805 - const: x-powers,axp806 @@ -257,9 +272,10 @@ properties: Defines the work frequency of DC-DC in kHz. patternProperties: - "^(([a-f])?ldo[0-9]|dcdc[0-7a-e]|ldo(_|-)io(0|1)|(dc1)?sw|rtc(_|-)ldo|drivevbus|dc5ldo)$": + "^(([a-f])?ldo[0-9]|dcdc[0-7a-e]|ldo(_|-)io(0|1)|(dc1)?sw|rtc(_|-)ldo|cpusldo|drivevbus|dc5ldo)$": $ref: /schemas/regulator/regulator.yaml# type: object + unevaluatedProperties: false properties: regulator-ramp-delay: @@ -295,7 +311,7 @@ additionalProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; @@ -311,7 +327,7 @@ examples: - | #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/Bindings/mfd/xylon,logicvc.yaml b/dts/Bindings/mfd/xylon,logicvc.yaml index 9efd49c39b..6e880a46d7 100644 --- a/dts/Bindings/mfd/xylon,logicvc.yaml +++ b/dts/Bindings/mfd/xylon,logicvc.yaml @@ -2,8 +2,8 @@ # Copyright 2019 Bootlin %YAML 1.2 --- -$id: "http://devicetree.org/schemas/mfd/xylon,logicvc.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/mfd/xylon,logicvc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Xylon LogiCVC multi-function device |