diff options
Diffstat (limited to 'dts/Bindings/mfd')
75 files changed, 2801 insertions, 935 deletions
diff --git a/dts/Bindings/mfd/actions,atc260x.yaml b/dts/Bindings/mfd/actions,atc260x.yaml index c3a368a0fe..6811246c57 100644 --- a/dts/Bindings/mfd/actions,atc260x.yaml +++ b/dts/Bindings/mfd/actions,atc260x.yaml @@ -129,7 +129,7 @@ required: examples: - | #include <dt-bindings/interrupt-controller/arm-gic.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/Bindings/mfd/adi,max77541.yaml b/dts/Bindings/mfd/adi,max77541.yaml new file mode 100644 index 0000000000..c7895b2c38 --- /dev/null +++ b/dts/Bindings/mfd/adi,max77541.yaml @@ -0,0 +1,68 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/adi,max77541.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MAX77540/MAX77541 PMIC from ADI + +maintainers: + - Okan Sahin <okan.sahin@analog.com> + +description: | + MAX77540 is a Power Management IC with 2 buck regulators. + + MAX77541 is a Power Management IC with 2 buck regulators and 1 ADC. + +properties: + compatible: + enum: + - adi,max77540 + - adi,max77541 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + regulators: + $ref: /schemas/regulator/adi,max77541-regulator.yaml# + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@69 { + compatible = "adi,max77541"; + reg = <0x69>; + interrupt-parent = <&gpio>; + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + + regulators { + buck1 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <5200000>; + regulator-boot-on; + regulator-always-on; + }; + buck2 { + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <5200000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + }; diff --git a/dts/Bindings/mfd/allwinner,sun6i-a31-prcm.yaml b/dts/Bindings/mfd/allwinner,sun6i-a31-prcm.yaml index cf94176fe1..8789e3639f 100644 --- a/dts/Bindings/mfd/allwinner,sun6i-a31-prcm.yaml +++ b/dts/Bindings/mfd/allwinner,sun6i-a31-prcm.yaml @@ -34,6 +34,9 @@ patternProperties: - allwinner,sun6i-a31-clock-reset - fixed-factor-clock + required: + - compatible + allOf: - if: properties: @@ -55,25 +58,17 @@ patternProperties: "#clock-cells": const: 0 - # Already checked in the main schema - compatible: true - clocks: maxItems: 2 clock-output-names: maxItems: 1 - phandle: true - required: - "#clock-cells" - - compatible - clocks - clock-output-names - additionalProperties: false - - if: properties: compatible: @@ -85,25 +80,17 @@ patternProperties: "#clock-cells": const: 0 - # Already checked in the main schema - compatible: true - clocks: maxItems: 1 clock-output-names: maxItems: 1 - phandle: true - required: - "#clock-cells" - - compatible - clocks - clock-output-names - additionalProperties: false - - if: properties: compatible: @@ -119,9 +106,6 @@ patternProperties: offset of the bit controlling this particular gate in the register. - # Already checked in the main schema - compatible: true - clocks: maxItems: 1 @@ -129,16 +113,11 @@ patternProperties: minItems: 1 maxItems: 32 - phandle: true - required: - "#clock-cells" - - compatible - clocks - clock-output-names - additionalProperties: false - - if: properties: compatible: @@ -150,9 +129,6 @@ patternProperties: "#clock-cells": const: 0 - # Already checked in the main schema - compatible: true - clocks: maxItems: 4 description: > @@ -162,16 +138,11 @@ patternProperties: clock-output-names: maxItems: 1 - phandle: true - required: - "#clock-cells" - - compatible - clocks - clock-output-names - additionalProperties: false - - if: properties: compatible: @@ -183,16 +154,8 @@ patternProperties: "#reset-cells": const: 1 - # Already checked in the main schema - compatible: true - - phandle: true - required: - "#reset-cells" - - compatible - - additionalProperties: false required: - compatible diff --git a/dts/Bindings/mfd/allwinner,sun8i-a23-prcm.yaml b/dts/Bindings/mfd/allwinner,sun8i-a23-prcm.yaml index 16c80a7eec..e51f855199 100644 --- a/dts/Bindings/mfd/allwinner,sun8i-a23-prcm.yaml +++ b/dts/Bindings/mfd/allwinner,sun8i-a23-prcm.yaml @@ -57,25 +57,17 @@ patternProperties: "#clock-cells": const: 0 - # Already checked in the main schema - compatible: true - clocks: maxItems: 1 clock-output-names: maxItems: 1 - phandle: true - required: - "#clock-cells" - - compatible - clocks - clock-output-names - additionalProperties: false - - if: properties: compatible: @@ -91,9 +83,6 @@ patternProperties: offset of the bit controlling this particular gate in the register. - # Already checked in the main schema - compatible: true - clocks: maxItems: 1 @@ -101,16 +90,11 @@ patternProperties: minItems: 1 maxItems: 32 - phandle: true - required: - "#clock-cells" - - compatible - clocks - clock-output-names - additionalProperties: false - - if: properties: compatible: @@ -122,34 +106,8 @@ patternProperties: "#reset-cells": const: 1 - # Already checked in the main schema - compatible: true - - phandle: true - required: - "#reset-cells" - - compatible - - additionalProperties: false - - - if: - properties: - compatible: - contains: - const: allwinner,sun8i-a23-codec-analog - - then: - properties: - # Already checked in the main schema - compatible: true - - phandle: true - - required: - - compatible - - additionalProperties: false required: - compatible diff --git a/dts/Bindings/mfd/ams,as3711.yaml b/dts/Bindings/mfd/ams,as3711.yaml new file mode 100644 index 0000000000..ad8649cbb2 --- /dev/null +++ b/dts/Bindings/mfd/ams,as3711.yaml @@ -0,0 +1,223 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ams,as3711.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Austria MicroSystems AS3711 Quad Buck High Current PMIC with Charger + +maintainers: + - Guennadi Liakhovetski <guennadi.liakhovetski@linux.intel.com> + +description: + AS3711 is an I2C PMIC from Austria MicroSystems with multiple DC/DC and LDO + power supplies, a battery charger and an RTC. So far only bindings for the + two step-up DC/DC converters are defined. + +properties: + compatible: + const: ams,as3711 + + reg: + maxItems: 1 + + backlight: + description: + Step-up converter configuration, to be used as a backlight source + type: object + additionalProperties: false + properties: + compatible: + const: ams,as3711-bl + + su1-dev: + description: Framebuffer phandle for the first step-up converter + $ref: /schemas/types.yaml#/definitions/phandle + + su1-max-uA: + description: Maximum current for the first step-up converter + $ref: /schemas/types.yaml#/definitions/uint32 + + su2-dev: + description: Framebuffer phandle for the second step-up converter + $ref: /schemas/types.yaml#/definitions/phandle + + su2-max-uA: + description: Maximum current for the second step-up converter + $ref: /schemas/types.yaml#/definitions/uint32 + + su2-feedback-voltage: + description: Second step-up converter uses voltage feedback + type: boolean + + su2-feedback-curr1: + description: + Second step-up converter uses CURR1 input for current feedback + type: boolean + + su2-feedback-curr2: + description: + Second step-up converter uses CURR2 input for current feedback + type: boolean + + su2-feedback-curr3: + description: + Second step-up converter uses CURR3 input for current feedback + type: boolean + + su2-feedback-curr-auto: + description: + Second step-up converter uses automatic current feedback selection + type: boolean + + su2-fbprot-lx-sd4: + description: + Second step-up converter uses LX_SD4 for over-voltage protection + type: boolean + + su2-fbprot-gpio2: + description: + Second step-up converter uses GPIO2 for over-voltage protection + type: boolean + + su2-fbprot-gpio3: + description: + Second step-up converter uses GPIO3 for over-voltage protection + type: boolean + + su2-fbprot-gpio4: + description: + Second step-up converter uses GPIO4 for over-voltage protection + type: boolean + + su2-auto-curr1: + description: + Second step-up converter uses CURR1 input for automatic current + feedback + type: boolean + + su2-auto-curr2: + description: + Second step-up converter uses CURR2 input for automatic current + feedback + type: boolean + + su2-auto-curr3: + description: + Second step-up converter uses CURR3 input for automatic current + feedback + type: boolean + + required: + - compatible + + dependentRequired: + # To use the SU1 converter as a backlight source the following two + # properties must be provided: + su1-dev: [ su1-max-uA ] + su1-max-uA: [ su1-dev ] + + # To use the SU2 converter as a backlight source the following two + # properties must be provided: + su2-dev: [ su2-max-uA ] + su2-max-uA: [ su2-dev ] + + su2-feedback-voltage: [ su2-dev ] + su2-feedback-curr1: [ su2-dev ] + su2-feedback-curr2: [ su2-dev ] + su2-feedback-curr3: [ su2-dev ] + su2-feedback-curr-auto: [ su2-dev ] + su2-fbprot-lx-sd4: [ su2-dev ] + su2-fbprot-gpio2: [ su2-dev ] + su2-fbprot-gpio3: [ su2-dev ] + su2-fbprot-gpio4: [ su2-dev ] + su2-auto-curr1: [ su2-feedback-curr-auto ] + su2-auto-curr2: [ su2-feedback-curr-auto ] + su2-auto-curr3: [ su2-feedback-curr-auto ] + + dependentSchemas: + su2-dev: + allOf: + - oneOf: + - required: + - su2-feedback-voltage + - required: + - su2-feedback-curr1 + - required: + - su2-feedback-curr2 + - required: + - su2-feedback-curr3 + - required: + - su2-feedback-curr-auto + - oneOf: + - required: + - su2-fbprot-lx-sd4 + - required: + - su2-fbprot-gpio2 + - required: + - su2-fbprot-gpio3 + - required: + - su2-fbprot-gpio4 + + su2-feedback-curr-auto: + anyOf: + - required: + - su2-auto-curr1 + - required: + - su2-auto-curr2 + - required: + - su2-auto-curr3 + + regulators: + description: Other DC/DC and LDO supplies + type: object + unevaluatedProperties: false + patternProperties: + "^(sd[1-4]|ldo[1-8])$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@40 { + compatible = "ams,as3711"; + reg = <0x40>; + + regulators { + sd4 { + regulator-name = "1.215V"; + regulator-min-microvolt = <1215000>; + regulator-max-microvolt = <1235000>; + }; + ldo2 { + regulator-name = "2.8V CPU"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + regulator-boot-on; + }; + }; + + backlight { + compatible = "ams,as3711-bl"; + su2-dev = <&lcdc>; + su2-max-uA = <36000>; + su2-feedback-curr-auto; + su2-fbprot-gpio4; + su2-auto-curr1; + su2-auto-curr2; + su2-auto-curr3; + }; + }; + }; diff --git a/dts/Bindings/mfd/arm,dev-platforms-syscon.yaml b/dts/Bindings/mfd/arm,dev-platforms-syscon.yaml new file mode 100644 index 0000000000..46b164ae08 --- /dev/null +++ b/dts/Bindings/mfd/arm,dev-platforms-syscon.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/arm,dev-platforms-syscon.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Arm Ltd Developer Platforms System Controllers + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +description: + The Arm Ltd Integrator, Realview, and Versatile families of developer + platforms are contain various system controller blocks. Often these blocks + are part of a daughterboard or motherboard module. + +properties: + compatible: + oneOf: + - items: + - enum: + - arm,integrator-ap-syscon + - arm,integrator-cp-syscon + - arm,integrator-sp-syscon + - arm,im-pd1-syscon + - const: syscon + - items: + - enum: + - arm,core-module-integrator + - arm,integrator-ap-syscon + - arm,integrator-cp-syscon + - arm,integrator-sp-syscon + - arm,realview-eb-syscon + - arm,realview-pb1176-syscon + - arm,realview-pb11mp-syscon + - arm,realview-pba8-syscon + - arm,realview-pbx-syscon + - arm,versatile-ib2-syscon + - const: syscon + - const: simple-mfd + - items: + - enum: + - arm,realview-eb11mp-revb-syscon + - arm,realview-eb11mp-revc-syscon + - const: arm,realview-eb-syscon + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + ranges: true + + '#address-cells': + const: 1 + + '#size-cells': + const: 1 + +required: + - compatible + - reg + +additionalProperties: + type: object + +... diff --git a/dts/Bindings/mfd/as3711.txt b/dts/Bindings/mfd/as3711.txt deleted file mode 100644 index d98cf18c72..0000000000 --- a/dts/Bindings/mfd/as3711.txt +++ /dev/null @@ -1,73 +0,0 @@ -AS3711 is an I2C PMIC from Austria MicroSystems with multiple DCDC and LDO power -supplies, a battery charger and an RTC. So far only bindings for the two stepup -DCDC converters are defined. Other DCDC and LDO supplies are configured, using -standard regulator properties, they must belong to a sub-node, called -"regulators" and be called "sd1" to "sd4" and "ldo1" to "ldo8." Stepup converter -configuration should be placed in a subnode, called "backlight." - -Compulsory properties: -- compatible : must be "ams,as3711" -- reg : specifies the I2C address - -To use the SU1 converter as a backlight source the following two properties must -be provided: -- su1-dev : framebuffer phandle -- su1-max-uA : maximum current - -To use the SU2 converter as a backlight source the following two properties must -be provided: -- su2-dev : framebuffer phandle -- su1-max-uA : maximum current - -Additionally one of these properties must be provided to select the type of -feedback used: -- su2-feedback-voltage : voltage feedback is used -- su2-feedback-curr1 : CURR1 input used for current feedback -- su2-feedback-curr2 : CURR2 input used for current feedback -- su2-feedback-curr3 : CURR3 input used for current feedback -- su2-feedback-curr-auto: automatic current feedback selection - -and one of these to select the over-voltage protection pin -- su2-fbprot-lx-sd4 : LX_SD4 is used for over-voltage protection -- su2-fbprot-gpio2 : GPIO2 is used for over-voltage protection -- su2-fbprot-gpio3 : GPIO3 is used for over-voltage protection -- su2-fbprot-gpio4 : GPIO4 is used for over-voltage protection - -If "su2-feedback-curr-auto" is selected, one or more of the following properties -have to be specified: -- su2-auto-curr1 : use CURR1 input for current feedback -- su2-auto-curr2 : use CURR2 input for current feedback -- su2-auto-curr3 : use CURR3 input for current feedback - -Example: - -as3711@40 { - compatible = "ams,as3711"; - reg = <0x40>; - - regulators { - sd4 { - regulator-name = "1.215V"; - regulator-min-microvolt = <1215000>; - regulator-max-microvolt = <1235000>; - }; - ldo2 { - regulator-name = "2.8V CPU"; - regulator-min-microvolt = <2800000>; - regulator-max-microvolt = <2800000>; - regulator-always-on; - regulator-boot-on; - }; - }; - - backlight { - compatible = "ams,as3711-bl"; - su2-dev = <&lcdc>; - su2-max-uA = <36000>; - su2-feedback-curr-auto; - su2-fbprot-gpio4; - su2-auto-curr1; - su2-auto-curr2; - su2-auto-curr3; - }; -}; diff --git a/dts/Bindings/mfd/aspeed-lpc.yaml b/dts/Bindings/mfd/aspeed-lpc.yaml index 750996d9a1..5dfe77aca1 100644 --- a/dts/Bindings/mfd/aspeed-lpc.yaml +++ b/dts/Bindings/mfd/aspeed-lpc.yaml @@ -27,7 +27,7 @@ description: as LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART management and bus snoop configuration. - * A set of SuperIO[3] scratch registers enableing implementation of e.g. custom + * A set of SuperIO[3] scratch registers enabling implementation of e.g. custom hardware management protocols for handover between the host and baseboard management controller. diff --git a/dts/Bindings/mfd/atmel-flexcom.txt b/dts/Bindings/mfd/atmel-flexcom.txt index 9d83753563..af692e8833 100644 --- a/dts/Bindings/mfd/atmel-flexcom.txt +++ b/dts/Bindings/mfd/atmel-flexcom.txt @@ -6,6 +6,7 @@ at boot time according to the device tree. Required properties: - compatible: Should be "atmel,sama5d2-flexcom" + or "microchip,sam9x7-flexcom", "atmel,sama5d2-flexcom" - reg: Should be the offset/length value for Flexcom dedicated I/O registers (without USART, TWI or SPI registers). - clocks: Should be the Flexcom peripheral clock from PMC. diff --git a/dts/Bindings/mfd/atmel-gpbr.txt b/dts/Bindings/mfd/atmel-gpbr.txt index e8c525569f..3c989d1760 100644 --- a/dts/Bindings/mfd/atmel-gpbr.txt +++ b/dts/Bindings/mfd/atmel-gpbr.txt @@ -6,6 +6,7 @@ Required properties: - compatible: Should be one of the following: "atmel,at91sam9260-gpbr", "syscon" "microchip,sam9x60-gpbr", "syscon" + "microchip,sam9x7-gpbr", "microchip,sam9x60-gpbr", "syscon" - reg: contains offset/length value of the GPBR memory region. diff --git a/dts/Bindings/mfd/atmel-hlcdc.txt b/dts/Bindings/mfd/atmel-hlcdc.txt index 5f8880cc75..7de696eefa 100644 --- a/dts/Bindings/mfd/atmel-hlcdc.txt +++ b/dts/Bindings/mfd/atmel-hlcdc.txt @@ -8,6 +8,7 @@ Required properties: "atmel,sama5d3-hlcdc" "atmel,sama5d4-hlcdc" "microchip,sam9x60-hlcdc" + "microchip,sam9x75-xlcdc" - reg: base address and size of the HLCDC device registers. - clock-names: the name of the 3 clocks requested by the HLCDC device. Should contain "periph_clk", "sys_clk" and "slow_clk". diff --git a/dts/Bindings/mfd/atmel-matrix.txt b/dts/Bindings/mfd/atmel-matrix.txt index 89d05c64fb..6e5f83614e 100644 --- a/dts/Bindings/mfd/atmel-matrix.txt +++ b/dts/Bindings/mfd/atmel-matrix.txt @@ -14,6 +14,7 @@ Required properties: "atmel,at91sam9x5-matrix", "syscon" "atmel,sama5d3-matrix", "syscon" "microchip,sam9x60-matrix", "syscon" + "microchip,sam9x7-matrix", "atmel,at91sam9x5-matrix", "syscon" - reg: Contains offset/length value of the Bus Matrix memory region. diff --git a/dts/Bindings/mfd/atmel-smc.txt b/dts/Bindings/mfd/atmel-smc.txt index 5696d9fcb5..fd62add38a 100644 --- a/dts/Bindings/mfd/atmel-smc.txt +++ b/dts/Bindings/mfd/atmel-smc.txt @@ -10,6 +10,7 @@ Required properties: "atmel,sama5d3-smc", "syscon" "atmel,sama5d2-smc", "syscon" "microchip,sam9x60-smc", "syscon" + "microchip,sam9x7-smc", "atmel,at91sam9260-smc", "syscon" - reg: Contains offset/length value of the SMC memory region. diff --git a/dts/Bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml b/dts/Bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml index 148f1da476..cb480162f9 100644 --- a/dts/Bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml +++ b/dts/Bindings/mfd/brcm,bcm6318-gpio-sysctl.yaml @@ -35,16 +35,16 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm6345-gpio.yaml" + $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in - Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. "^pinctrl@[0-9a-f]+$": # Child node type: object - $ref: "../pinctrl/brcm,bcm6318-pinctrl.yaml" + $ref: /schemas/pinctrl/brcm,bcm6318-pinctrl.yaml description: Pin controller for the SoC pins. This child node definition should follow the bindings specified in diff --git a/dts/Bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml b/dts/Bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml index 7e582243ea..9c2a04829d 100644 --- a/dts/Bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml +++ b/dts/Bindings/mfd/brcm,bcm63268-gpio-sysctl.yaml @@ -35,16 +35,16 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm6345-gpio.yaml" + $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in - Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. "^pinctrl@[0-9a-f]+$": # Child node type: object - $ref: "../pinctrl/brcm,bcm63268-pinctrl.yaml" + $ref: /schemas/pinctrl/brcm,bcm63268-pinctrl.yaml description: Pin controller for the SoC pins. This child node definition should follow the bindings specified in @@ -148,47 +148,47 @@ examples: pinctrl_nand: nand-pins { function = "nand"; - group = "nand_grp"; + pins = "nand_grp"; }; pinctrl_gpio35_alt: gpio35_alt-pins { function = "gpio35_alt"; - pin = "gpio35"; + pins = "gpio35"; }; pinctrl_dectpd: dectpd-pins { function = "dectpd"; - group = "dectpd_grp"; + pins = "dectpd_grp"; }; pinctrl_vdsl_phy_override_0: vdsl_phy_override_0-pins { function = "vdsl_phy_override_0"; - group = "vdsl_phy_override_0_grp"; + pins = "vdsl_phy_override_0_grp"; }; pinctrl_vdsl_phy_override_1: vdsl_phy_override_1-pins { function = "vdsl_phy_override_1"; - group = "vdsl_phy_override_1_grp"; + pins = "vdsl_phy_override_1_grp"; }; pinctrl_vdsl_phy_override_2: vdsl_phy_override_2-pins { function = "vdsl_phy_override_2"; - group = "vdsl_phy_override_2_grp"; + pins = "vdsl_phy_override_2_grp"; }; pinctrl_vdsl_phy_override_3: vdsl_phy_override_3-pins { function = "vdsl_phy_override_3"; - group = "vdsl_phy_override_3_grp"; + pins = "vdsl_phy_override_3_grp"; }; pinctrl_dsl_gpio8: dsl_gpio8-pins { function = "dsl_gpio8"; - group = "dsl_gpio8"; + pins = "dsl_gpio8"; }; pinctrl_dsl_gpio9: dsl_gpio9-pins { function = "dsl_gpio9"; - group = "dsl_gpio9"; + pins = "dsl_gpio9"; }; }; }; diff --git a/dts/Bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml b/dts/Bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml index 2230848e11..5f48209ed4 100644 --- a/dts/Bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml +++ b/dts/Bindings/mfd/brcm,bcm6328-gpio-sysctl.yaml @@ -35,16 +35,16 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm6345-gpio.yaml" + $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in - Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. "^pinctrl@[0-9a-f]+$": # Child node type: object - $ref: "../pinctrl/brcm,bcm6328-pinctrl.yaml" + $ref: /schemas/pinctrl/brcm,bcm6328-pinctrl.yaml description: Pin controller for the SoC pins. This child node definition should follow the bindings specified in diff --git a/dts/Bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml b/dts/Bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml index c06693b6f7..f1f4629565 100644 --- a/dts/Bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml +++ b/dts/Bindings/mfd/brcm,bcm6358-gpio-sysctl.yaml @@ -35,16 +35,16 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm6345-gpio.yaml" + $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in - Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. "^pinctrl@[0-9a-f]+$": # Child node type: object - $ref: "../pinctrl/brcm,bcm6358-pinctrl.yaml" + $ref: /schemas/pinctrl/brcm,bcm6358-pinctrl.yaml description: Pin controller for the SoC pins. This child node definition should follow the bindings specified in diff --git a/dts/Bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml b/dts/Bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml index c560bede0e..c2941638c8 100644 --- a/dts/Bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml +++ b/dts/Bindings/mfd/brcm,bcm6362-gpio-sysctl.yaml @@ -35,16 +35,16 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm6345-gpio.yaml" + $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in - Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. "^pinctrl@[0-9a-f]+$": # Child node type: object - $ref: "../pinctrl/brcm,bcm6362-pinctrl.yaml" + $ref: /schemas/pinctrl/brcm,bcm6362-pinctrl.yaml description: Pin controller for the SoC pins. This child node definition should follow the bindings specified in @@ -230,7 +230,7 @@ examples: pinctrl_nand: nand-pins { function = "nand"; - group = "nand_grp"; + pins = "nand_grp"; }; }; }; diff --git a/dts/Bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml b/dts/Bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml index c534f5f240..44e77d77d3 100644 --- a/dts/Bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml +++ b/dts/Bindings/mfd/brcm,bcm6368-gpio-sysctl.yaml @@ -35,16 +35,16 @@ patternProperties: "^gpio@[0-9a-f]+$": # Child node type: object - $ref: "../gpio/brcm,bcm6345-gpio.yaml" + $ref: /schemas/gpio/brcm,bcm63xx-gpio.yaml description: GPIO controller for the SoC GPIOs. This child node definition should follow the bindings specified in - Documentation/devicetree/bindings/gpio/brcm,bcm6345-gpio.yaml. + Documentation/devicetree/bindings/gpio/brcm,bcm63xx-gpio.yaml. "^pinctrl@[0-9a-f]+$": # Child node type: object - $ref: "../pinctrl/brcm,bcm6368-pinctrl.yaml" + $ref: /schemas/pinctrl/brcm,bcm6368-pinctrl.yaml description: Pin controller for the SoC pins. This child node definition should follow the bindings specified in @@ -240,7 +240,7 @@ examples: pinctrl_uart1: uart1-pins { function = "uart1"; - group = "uart1_grp"; + pins = "uart1_grp"; }; }; }; diff --git a/dts/Bindings/mfd/canaan,k210-sysctl.yaml b/dts/Bindings/mfd/canaan,k210-sysctl.yaml index e2046f07a4..3b3beab9db 100644 --- a/dts/Bindings/mfd/canaan,k210-sysctl.yaml +++ b/dts/Bindings/mfd/canaan,k210-sysctl.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Canaan Kendryte K210 System Controller maintainers: - - Damien Le Moal <damien.lemoal@wdc.com> + - Damien Le Moal <dlemoal@kernel.org> description: Canaan Inc. Kendryte K210 SoC system controller which provides a @@ -36,7 +36,7 @@ properties: clock-controller: # Child node type: object - $ref: "../clock/canaan,k210-clk.yaml" + $ref: ../clock/canaan,k210-clk.yaml description: Clock controller for the SoC clocks. This child node definition should follow the bindings specified in @@ -45,7 +45,7 @@ properties: reset-controller: # Child node type: object - $ref: "../reset/canaan,k210-rst.yaml" + $ref: ../reset/canaan,k210-rst.yaml description: Reset controller for the SoC. This child node definition should follow the bindings specified in @@ -54,7 +54,7 @@ properties: syscon-reboot: # Child node type: object - $ref: "../power/reset/syscon-reboot.yaml" + $ref: ../power/reset/syscon-reboot.yaml description: Reboot method for the SoC. This child node definition should follow the bindings specified in diff --git a/dts/Bindings/mfd/dlg,da9063.yaml b/dts/Bindings/mfd/dlg,da9063.yaml index e8e74e9107..c5a7e10d7d 100644 --- a/dts/Bindings/mfd/dlg,da9063.yaml +++ b/dts/Bindings/mfd/dlg,da9063.yaml @@ -12,6 +12,11 @@ maintainers: description: | For device-tree bindings of other sub-modules refer to the binding documents under the respective sub-system directories. + Using regulator-{uv,ov}-{warn,error,protection}-microvolt requires special + handling: First, when GP_FB2 is used, it must be ensured that there is no + moment where all voltage monitors are disabled. Next, as da9063 only supports + UV *and* OV monitoring, both must be set to the same severity and value + (0: disable, 1: enable). properties: compatible: @@ -121,11 +126,19 @@ examples: regulator-max-microamp = <2000000>; regulator-boot-on; }; + ldo6 { + /* UNUSED */ + regulator-name = "LDO_6"; + regulator-uv-protection-microvolt = <0>; + regulator-ov-protection-microvolt = <0>; + }; ldo11 { regulator-name = "LDO_11"; regulator-min-microvolt = <900000>; - regulator-max-microvolt = <3600000>; - regulator-boot-on; + regulator-max-microvolt = <900000>; + regulator-uv-protection-microvolt = <1>; + regulator-ov-protection-microvolt = <1>; + regulator-always-on; }; }; }; diff --git a/dts/Bindings/mfd/gateworks-gsc.yaml b/dts/Bindings/mfd/gateworks-gsc.yaml index acb9c54942..dc379f3ebf 100644 --- a/dts/Bindings/mfd/gateworks-gsc.yaml +++ b/dts/Bindings/mfd/gateworks-gsc.yaml @@ -122,12 +122,6 @@ patternProperties: compatible: const: gw,gsc-fan - "#address-cells": - const: 1 - - "#size-cells": - const: 0 - reg: description: The fan controller base address maxItems: 1 @@ -135,8 +129,6 @@ patternProperties: required: - compatible - reg - - "#address-cells" - - "#size-cells" required: - compatible @@ -194,8 +186,6 @@ examples: }; fan-controller@2c { - #address-cells = <1>; - #size-cells = <0>; compatible = "gw,gsc-fan"; reg = <0x2c>; }; diff --git a/dts/Bindings/mfd/google,cros-ec.yaml b/dts/Bindings/mfd/google,cros-ec.yaml index 3d5efa5578..e1ca4f297c 100644 --- a/dts/Bindings/mfd/google,cros-ec.yaml +++ b/dts/Bindings/mfd/google,cros-ec.yaml @@ -33,6 +33,9 @@ properties: - description: For implementations of the EC connected through RPMSG. const: google,cros-ec-rpmsg + - description: + For implementations of the EC connected through UART. + const: google,cros-ec-uart controller-data: true @@ -62,7 +65,7 @@ properties: ARM Cortex M4 Co-processor. Contains the name of the rpmsg device. Used to match the subnode to the rpmsg device announced by the SCP. - $ref: "/schemas/types.yaml#/definitions/string" + $ref: /schemas/types.yaml#/definitions/string spi-max-frequency: true @@ -91,23 +94,23 @@ properties: const: 0 typec: - $ref: "/schemas/chrome/google,cros-ec-typec.yaml#" + $ref: /schemas/chrome/google,cros-ec-typec.yaml# ec-pwm: - $ref: "/schemas/pwm/google,cros-ec-pwm.yaml#" + $ref: /schemas/pwm/google,cros-ec-pwm.yaml# deprecated: true pwm: - $ref: "/schemas/pwm/google,cros-ec-pwm.yaml#" + $ref: /schemas/pwm/google,cros-ec-pwm.yaml# kbd-led-backlight: - $ref: "/schemas/chrome/google,cros-kbd-led-backlight.yaml#" + $ref: /schemas/chrome/google,cros-kbd-led-backlight.yaml# keyboard-controller: - $ref: "/schemas/input/google,cros-ec-keyb.yaml#" + $ref: /schemas/input/google,cros-ec-keyb.yaml# proximity: - $ref: "/schemas/iio/proximity/google,cros-ec-mkbp-proximity.yaml#" + $ref: /schemas/iio/proximity/google,cros-ec-mkbp-proximity.yaml# codecs: type: object @@ -123,7 +126,7 @@ properties: patternProperties: "^ec-codec@[a-f0-9]+$": type: object - $ref: "/schemas/sound/google,cros-ec-codec.yaml#" + $ref: /schemas/sound/google,cros-ec-codec.yaml# required: - "#address-cells" @@ -148,15 +151,15 @@ properties: patternProperties: "^i2c-tunnel[0-9]*$": type: object - $ref: "/schemas/i2c/google,cros-ec-i2c-tunnel.yaml#" + $ref: /schemas/i2c/google,cros-ec-i2c-tunnel.yaml# "^regulator@[0-9]+$": type: object - $ref: "/schemas/regulator/google,cros-ec-regulator.yaml#" + $ref: /schemas/regulator/google,cros-ec-regulator.yaml# "^extcon[0-9]*$": type: object - $ref: "/schemas/extcon/extcon-usbc-cros-ec.yaml#" + $ref: /schemas/extcon/extcon-usbc-cros-ec.yaml# required: - compatible @@ -187,6 +190,15 @@ allOf: properties: mediatek,rpmsg-name: false + - if: + properties: + compatible: + not: + contains: + enum: + - google,cros-ec-rpmsg + - google,cros-ec-uart + then: required: - reg - interrupts @@ -234,7 +246,7 @@ examples: #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; @@ -251,7 +263,7 @@ examples: #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/interrupt-controller/irq.h> - spi0 { + spi { #address-cells = <1>; #size-cells = <0>; @@ -284,7 +296,7 @@ examples: # Example for FPMCU - | - spi0 { + spi { #address-cells = <0x1>; #size-cells = <0x0>; @@ -299,4 +311,12 @@ examples: vdd-supply = <&pp3300_fp_mcu>; }; }; + + # Example for UART + - | + serial { + cros-ec { + compatible = "google,cros-ec-uart"; + }; + }; ... diff --git a/dts/Bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml b/dts/Bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml index 22edcb4b21..6a82435183 100644 --- a/dts/Bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml +++ b/dts/Bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml @@ -17,7 +17,7 @@ description: | node. The SPMI controller part is provided by - Documentation/devicetree/bindings/mfd/hisilicon,hi6421-spmi-pmic.yaml + Documentation/devicetree/bindings/spmi/hisilicon,hisi-spmi-controller.yaml properties: $nodename: @@ -42,18 +42,11 @@ properties: additionalProperties: false - properties: - '#address-cells': - const: 1 - - '#size-cells': - const: 0 - patternProperties: '^ldo[0-9]+$': type: object - $ref: "/schemas/regulator/regulator.yaml#" + $ref: /schemas/regulator/regulator.yaml# unevaluatedProperties: false @@ -66,72 +59,75 @@ additionalProperties: false examples: - | + #include <dt-bindings/spmi/spmi.h> - pmic: pmic@0 { - compatible = "hisilicon,hi6421v600-spmi"; - reg = <0 0>; - - #interrupt-cells = <2>; - interrupt-controller; - interrupt-parent = <&gpio28>; - interrupts = <0 0>; - - regulators { - #address-cells = <1>; + spmi { + #address-cells = <2>; #size-cells = <0>; - ldo3: ldo3 { - regulator-name = "ldo3"; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <2000000>; - regulator-boot-on; - }; - - ldo4: ldo4 { - regulator-name = "ldo4"; - regulator-min-microvolt = <1725000>; - regulator-max-microvolt = <1900000>; - regulator-boot-on; - }; - - ldo9: ldo9 { - regulator-name = "ldo9"; - regulator-min-microvolt = <1750000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; - - ldo15: ldo15 { - regulator-name = "ldo15"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - regulator-always-on; - }; - - ldo16: ldo16 { - regulator-name = "ldo16"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <3000000>; - regulator-boot-on; - }; - - ldo17: ldo17 { - regulator-name = "ldo17"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <3300000>; - }; - - ldo33: ldo33 { - regulator-name = "ldo33"; - regulator-min-microvolt = <2500000>; - regulator-max-microvolt = <3300000>; - regulator-boot-on; - }; - - ldo34: ldo34 { - regulator-name = "ldo34"; - regulator-min-microvolt = <2600000>; - regulator-max-microvolt = <3300000>; + pmic@0 { + compatible = "hisilicon,hi6421v600-spmi"; + reg = <0 SPMI_USID>; + + #interrupt-cells = <2>; + interrupt-controller; + interrupt-parent = <&gpio28>; + interrupts = <0 0>; + + regulators { + ldo3 { + regulator-name = "ldo3"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2000000>; + regulator-boot-on; + }; + + ldo4 { + regulator-name = "ldo4"; + regulator-min-microvolt = <1725000>; + regulator-max-microvolt = <1900000>; + regulator-boot-on; + }; + + ldo9 { + regulator-name = "ldo9"; + regulator-min-microvolt = <1750000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo15 { + regulator-name = "ldo15"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + + ldo16 { + regulator-name = "ldo16"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + }; + + ldo17 { + regulator-name = "ldo17"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + }; + + ldo33 { + regulator-name = "ldo33"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + }; + + ldo34 { + regulator-name = "ldo34"; + regulator-min-microvolt = <2600000>; + regulator-max-microvolt = <3300000>; + }; + }; }; - }; }; diff --git a/dts/Bindings/mfd/max8925.txt b/dts/Bindings/mfd/max8925.txt deleted file mode 100644 index 4f0dc6638e..0000000000 --- a/dts/Bindings/mfd/max8925.txt +++ /dev/null @@ -1,64 +0,0 @@ -* Maxim max8925 Power Management IC - -Required parent device properties: -- compatible : "maxim,max8925" -- reg : the I2C slave address for the max8925 chip -- interrupts : IRQ line for the max8925 chip -- interrupt-controller: describes the max8925 as an interrupt - controller (has its own domain) -- #interrupt-cells : should be 1. - - The cell is the max8925 local IRQ number - -Optional parent device properties: -- maxim,tsc-irq: there are 2 IRQ lines for max8925, one is indicated in - interrupts property, the other is indicated here. - -max8925 consists of a large and varied group of sub-devices: - -Device Supply Names Description ------- ------------ ----------- -max8925-onkey : : On key -max8925-rtc : : RTC -max8925-regulator : : Regulators -max8925-backlight : : Backlight -max8925-touch : : Touchscreen -max8925-power : : Charger - -Example: - - pmic: max8925@3c { - compatible = "maxim,max8925"; - reg = <0x3c>; - interrupts = <1>; - interrupt-parent = <&intcmux4>; - interrupt-controller; - #interrupt-cells = <1>; - maxim,tsc-irq = <0>; - - regulators { - SDV1 { - regulator-min-microvolt = <637500>; - regulator-max-microvolt = <1425000>; - regulator-boot-on; - regulator-always-on; - }; - - LDO1 { - regulator-min-microvolt = <750000>; - regulator-max-microvolt = <3900000>; - regulator-boot-on; - regulator-always-on; - }; - - }; - backlight { - maxim,max8925-dual-string = <0>; - }; - charger { - batt-detect = <0>; - topoff-threshold = <1>; - fast-charge = <7>; - no-temp-support = <0>; - no-insert-detect = <0>; - }; - }; diff --git a/dts/Bindings/mfd/max8998.txt b/dts/Bindings/mfd/max8998.txt deleted file mode 100644 index 4ed52184d0..0000000000 --- a/dts/Bindings/mfd/max8998.txt +++ /dev/null @@ -1,125 +0,0 @@ -* Maxim MAX8998, National/TI LP3974 multi-function device - -The Maxim MAX8998 is a multi-function device which includes voltage/current -regulators, real time clock, battery charging controller and several -other sub-blocks. It is interfaced using an I2C interface. Each sub-block -is addressed by the host system using different i2c slave address. - -PMIC sub-block --------------- - -The PMIC sub-block contains a number of voltage and current regulators, -with controllable parameters and dynamic voltage scaling capability. -In addition, it includes a real time clock and battery charging controller -as well. It is accessible at I2C address 0x66. - -Required properties: -- compatible: Should be one of the following: - - "maxim,max8998" for Maxim MAX8998 - - "national,lp3974" or "ti,lp3974" for National/TI LP3974. -- reg: Specifies the i2c slave address of the pmic block. It should be 0x66. - -Optional properties: -- interrupts: Interrupt specifiers for two interrupt sources. - - First interrupt specifier is for main interrupt. - - Second interrupt specifier is for power-on/-off interrupt. -- max8998,pmic-buck1-dvs-gpios: GPIO specifiers for two host gpios used - for buck 1 dvs. The format of the gpio specifier depends on the gpio - controller. -- max8998,pmic-buck2-dvs-gpio: GPIO specifier for host gpio used - for buck 2 dvs. The format of the gpio specifier depends on the gpio - controller. -- max8998,pmic-buck1-default-dvs-idx: Default voltage setting selected from - the possible 4 options selectable by the dvs gpios. The value of this - property should be 0, 1, 2 or 3. If not specified or out of range, - a default value of 0 is taken. -- max8998,pmic-buck2-default-dvs-idx: Default voltage setting selected from - the possible 2 options selectable by the dvs gpios. The value of this - property should be 0 or 1. If not specified or out of range, a default - value of 0 is taken. -- max8998,pmic-buck-voltage-lock: If present, disallows changing of - preprogrammed buck dvfs voltages. - -Additional properties required if max8998,pmic-buck1-dvs-gpios is defined: -- max8998,pmic-buck1-dvs-voltage: An array of 4 voltage values in microvolts - for buck1 regulator that can be selected using dvs gpio. - -Additional properties required if max8998,pmic-buck2-dvs-gpio is defined: -- max8998,pmic-buck2-dvs-voltage: An array of 2 voltage values in microvolts - for buck2 regulator that can be selected using dvs gpio. - -Regulators: All the regulators of MAX8998 to be instantiated shall be -listed in a child node named 'regulators'. Each regulator is represented -by a child node of the 'regulators' node. - - regulator-name { - /* standard regulator bindings here */ - }; - -Following regulators of the MAX8998 PMIC block are supported. Note that -the 'n' in regulator name, as in LDOn or BUCKn, represents the LDO or BUCK -number as described in MAX8998 datasheet. - - - LDOn - - valid values for n are 2 to 17 - - Example: LDO2, LDO10, LDO17 - - BUCKn - - valid values for n are 1 to 4. - - Example: BUCK1, BUCK2, BUCK3, BUCK4 - - - ENVICHG: Battery Charging Current Monitor Output. This is a fixed - voltage type regulator - - - ESAFEOUT1: (ldo19) - - ESAFEOUT2: (ld020) - - - CHARGER: main battery charger current control - -Standard regulator bindings are used inside regulator subnodes. Check - Documentation/devicetree/bindings/regulator/regulator.txt -for more details. - -Example: - - pmic@66 { - compatible = "maxim,max8998-pmic"; - reg = <0x66>; - interrupt-parent = <&wakeup_eint>; - interrupts = <4 0>, <3 0>; - - /* Buck 1 DVS settings */ - max8998,pmic-buck1-default-dvs-idx = <0>; - max8998,pmic-buck1-dvs-gpios = <&gpx0 0 1 0 0>, /* SET1 */ - <&gpx0 1 1 0 0>; /* SET2 */ - max8998,pmic-buck1-dvs-voltage = <1350000>, <1300000>, - <1000000>, <950000>; - - /* Buck 2 DVS settings */ - max8998,pmic-buck2-default-dvs-idx = <0>; - max8998,pmic-buck2-dvs-gpio = <&gpx0 0 3 0 0>; /* SET3 */ - max8998,pmic-buck2-dvs-voltage = <1350000>, <1300000>; - - /* Regulators to instantiate */ - regulators { - ldo2_reg: LDO2 { - regulator-name = "VDD_ALIVE_1.1V"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; - regulator-always-on; - }; - - buck1_reg: BUCK1 { - regulator-name = "VDD_ARM_1.2V"; - regulator-min-microvolt = <950000>; - regulator-max-microvolt = <1350000>; - regulator-always-on; - regulator-boot-on; - }; - - charger_reg: CHARGER { - regulator-name = "CHARGER"; - regulator-min-microamp = <90000>; - regulator-max-microamp = <800000>; - }; - }; - }; diff --git a/dts/Bindings/mfd/maxim,max5970.yaml b/dts/Bindings/mfd/maxim,max5970.yaml new file mode 100644 index 0000000000..0da5cae385 --- /dev/null +++ b/dts/Bindings/mfd/maxim,max5970.yaml @@ -0,0 +1,156 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max5970.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Regulator for MAX5970 Smart Switch from Maxim Integrated + +maintainers: + - Patrick Rudolph <patrick.rudolph@9elements.com> + +description: | + The smart switch provides no output regulation, but independent fault protection + and voltage and current sensing. + Programming is done through I2C bus. + + Datasheets: + https://datasheets.maximintegrated.com/en/ds/MAX5970.pdf + https://datasheets.maximintegrated.com/en/ds/MAX5978.pdf + +properties: + compatible: + enum: + - maxim,max5970 + - maxim,max5978 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + leds: + type: object + description: + Properties for four LEDS. + + properties: + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + + patternProperties: + "^led@[0-3]$": + $ref: /schemas/leds/common.yaml# + unevaluatedProperties: false + type: object + + properties: + reg: + maximum: 3 + + additionalProperties: false + + vss1-supply: + description: Supply of the first channel. + + vss2-supply: + description: Supply of the second channel. + + regulators: + type: object + description: + Properties for both hot swap control/switch. + + patternProperties: + "^sw[0-1]$": + $ref: /schemas/regulator/regulator.yaml# + type: object + properties: + shunt-resistor-micro-ohms: + description: | + The value of current sense resistor in microohms. + + required: + - shunt-resistor-micro-ohms + + unevaluatedProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - regulators + - vss1-supply + +allOf: + - if: + properties: + compatible: + enum: + - maxim,max5970 + then: + required: + - vss2-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + regulator@3a { + compatible = "maxim,max5978"; + reg = <0x3a>; + vss1-supply = <&p3v3>; + + regulators { + sw0_ref_0: sw0 { + shunt-resistor-micro-ohms = <12000>; + }; + }; + + leds { + #address-cells = <1>; + #size-cells = <0>; + led@0 { + reg = <0>; + label = "led0"; + default-state = "on"; + }; + led@1 { + reg = <1>; + label = "led1"; + default-state = "on"; + }; + }; + }; + }; + + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + regulator@3a { + compatible = "maxim,max5970"; + reg = <0x3a>; + vss1-supply = <&p3v3>; + vss2-supply = <&p5v>; + + regulators { + sw0_ref_1: sw0 { + shunt-resistor-micro-ohms = <12000>; + }; + sw1_ref_1: sw1 { + shunt-resistor-micro-ohms = <10000>; + }; + }; + }; + }; +... diff --git a/dts/Bindings/mfd/maxim,max77693.yaml b/dts/Bindings/mfd/maxim,max77693.yaml index 1b06a77ec7..6a6f222b86 100644 --- a/dts/Bindings/mfd/maxim,max77693.yaml +++ b/dts/Bindings/mfd/maxim,max77693.yaml @@ -37,6 +37,7 @@ properties: max77693-muic: type: object additionalProperties: false + deprecated: true properties: compatible: @@ -45,6 +46,21 @@ properties: required: - compatible + muic: + type: object + additionalProperties: false + + properties: + compatible: + const: maxim,max77693-muic + + connector: + $ref: /schemas/connector/usb-connector.yaml# + unevaluatedProperties: false + + required: + - compatible + motor-driver: type: object additionalProperties: false @@ -107,6 +123,38 @@ examples: }; }; + muic { + compatible = "maxim,max77693-muic"; + + connector { + compatible = "samsung,usb-connector-11pin", + "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + muic_to_usb: endpoint { + remote-endpoint = <&usb_to_muic>; + }; + }; + + port@3 { + reg = <3>; + + muic_to_mhl: endpoint { + remote-endpoint = <&mhl_to_muic>; + }; + }; + }; + }; + }; + motor-driver { compatible = "maxim,max77693-haptic"; haptic-supply = <&ldo26_reg>; diff --git a/dts/Bindings/mfd/maxim,max8925.yaml b/dts/Bindings/mfd/maxim,max8925.yaml new file mode 100644 index 0000000000..86dd810851 --- /dev/null +++ b/dts/Bindings/mfd/maxim,max8925.yaml @@ -0,0 +1,145 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max8925.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MAX8925 PMIC from Maxim Integrated. + +maintainers: + - Lee Jones <lee@kernel.org> + +properties: + compatible: + const: maxim,max8925 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + description: + The cell is the IRQ number + + maxim,tsc-irq: + description: second interrupt from max8925 + $ref: /schemas/types.yaml#/definitions/uint32 + + regulators: + type: object + + patternProperties: + "^SDV[1-3]$|^LDO[1-9]$|^LDO1[0-9]$|^LDO20$": + description: regulator configuration for SDV1-3 and LDO1-20 + $ref: /schemas/regulator/regulator.yaml + unevaluatedProperties: false + + additionalProperties: false + + backlight: + type: object + properties: + maxim,max8925-dual-string: + description: set to 1 to support dual string + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + default: 0 + + additionalProperties: false + + charger: + type: object + properties: + batt-detect: + description: set to 1 if battery detection via ID pin is supported + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + default: 0 + + topoff-threshold: + description: charging current in topoff mode, configures bits 5-6 in CHG_CNTL1 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 3 + default: 0 + + fast-charge: + description: set charging current in fast mode, configures bits 0-3 in CHG_CNTL1 + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 0 + maximum: 7 + default: 0 + + no-temp-support: + description: set to 1 if temperature sensing is not supported + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + default: 0 + + no-insert-detect: + description: set to 1 if AC detection is not supported + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + default: 0 + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + - regulators + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@3c { + compatible = "maxim,max8925"; + reg = <0x3c>; + interrupts = <1>; + interrupt-parent = <&intcmux4>; + interrupt-controller; + #interrupt-cells = <1>; + maxim,tsc-irq = <0>; + + regulators { + SDV1 { + regulator-min-microvolt = <637500>; + regulator-max-microvolt = <1425000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO1 { + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <3900000>; + regulator-boot-on; + regulator-always-on; + }; + }; + + backlight { + maxim,max8925-dual-string = <0>; + }; + + charger { + batt-detect = <0>; + topoff-threshold = <1>; + fast-charge = <7>; + no-temp-support = <0>; + no-insert-detect = <0>; + }; + }; + }; diff --git a/dts/Bindings/mfd/maxim,max8998.yaml b/dts/Bindings/mfd/maxim,max8998.yaml new file mode 100644 index 0000000000..f3c3f64fd0 --- /dev/null +++ b/dts/Bindings/mfd/maxim,max8998.yaml @@ -0,0 +1,324 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/maxim,max8998.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Maxim MAX8998, National/TI LP3974 Power Management IC + +maintainers: + - Krzysztof Kozlowski <krzk@kernel.org> + +description: + The Maxim MAX8998 is a Power Management IC which includes voltage/current + regulators, real time clock, battery charging controller and several other + sub-blocks. It is interfaced using an I2C interface. Each sub-block is + addressed by the host system using different i2c slave address. + +properties: + compatible: + enum: + - maxim,max8998 + - national,lp3974 + - ti,lp3974 + + reg: + maxItems: 1 + + interrupts: + minItems: 1 + items: + - description: Main interrupt + - description: Power-on/-off interrupt + + max8998,pmic-buck1-dvs-gpios: + maxItems: 2 + description: + Two host gpios used for buck1 DVS. + + max8998,pmic-buck2-dvs-gpio: + maxItems: 1 + description: + Host gpio used for buck2 DVS. + + max8998,pmic-buck1-default-dvs-idx: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + default: 0 + description: + Default voltage setting selected from the possible 4 options selectable + by the DVS gpios. + + max8998,pmic-buck2-default-dvs-idx: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + default: 0 + description: + Default voltage setting selected from the possible 2 options selectable + by the DVS GPIOs. + + max8998,pmic-buck-voltage-lock: + type: boolean + description: + If present, disallows changing of preprogrammed buck DVS voltages. + + max8998,pmic-buck1-dvs-voltage: + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 4 + description: + Four voltage values in microvolts for buck1 regulator that can be + selected using DVS GPIO. + + max8998,pmic-buck2-dvs-voltage: + $ref: /schemas/types.yaml#/definitions/uint32-array + maxItems: 2 + description: + Two voltage values in microvolts for buck2 regulator that can be + selected using DVS GPIO. + + regulators: + type: object + additionalProperties: false + + properties: + CHARGER: + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + description: + CHARGER is main battery charger current control, wrongly represented + as regulator. + + properties: + regulator-min-microamp: + minimum: 90000 + maximum: 800000 + + regulator-max-microamp: + minimum: 90000 + maximum: 800000 + + regulator-min-microvolt: false + regulator-max-microvolt: false + + required: + - regulator-name + + patternProperties: + "^(LDO([2-9]|1[0-7])|BUCK[1-4])$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + + required: + - regulator-name + + "^(EN32KHz-AP|EN32KHz-CP|ENVICHG|ESAFEOUT[12])$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + description: | + EN32KHz-AP and EN32KHz-CP are 32768 Hz clocks, wrongly represented as + regulators. + ENVICHG is a Battery Charging Current Monitor Output. + + properties: + regulator-min-microvolt: false + regulator-max-microvolt: false + + required: + - regulator-name + +dependencies: + max8998,pmic-buck1-dvs-gpios: [ "max8998,pmic-buck1-dvs-voltage" ] + max8998,pmic-buck2-dvs-gpio: [ "max8998,pmic-buck2-dvs-voltage" ] + +required: + - compatible + - reg + - regulators + +additionalProperties: false + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@66 { + compatible = "national,lp3974"; + reg = <0x66>; + interrupts-extended = <&gpx0 7 IRQ_TYPE_LEVEL_LOW>, + <&gpx2 7 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&lp3974_irq>; + + max8998,pmic-buck1-default-dvs-idx = <0>; + max8998,pmic-buck1-dvs-gpios = <&gpx0 5 GPIO_ACTIVE_HIGH>, + <&gpx0 6 GPIO_ACTIVE_HIGH>; + max8998,pmic-buck1-dvs-voltage = <1100000>, <1000000>, + <1100000>, <1000000>; + max8998,pmic-buck2-default-dvs-idx = <0>; + max8998,pmic-buck2-dvs-gpio = <&gpe2 0 GPIO_ACTIVE_HIGH>; + max8998,pmic-buck2-dvs-voltage = <1200000>, <1100000>; + + regulators { + LDO2 { + regulator-name = "VALIVE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + LDO3 { + regulator-name = "VUSB+MIPI_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-always-on; + }; + + LDO4 { + regulator-name = "VADC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + LDO5 { + regulator-name = "VTF_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + LDO6 { + regulator-name = "LDO6"; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + }; + + LDO7 { + regulator-name = "VLCD+VMIPI_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + LDO8 { + regulator-name = "VUSB+VDAC_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + LDO9 { + regulator-name = "VCC_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-always-on; + }; + + LDO10 { + regulator-name = "VPLL_1.1V"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + LDO11 { + regulator-name = "CAM_AF_3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + LDO12 { + regulator-name = "PS_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + LDO13 { + regulator-name = "VHIC_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + LDO14 { + regulator-name = "CAM_I_HOST_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + LDO15 { + regulator-name = "CAM_S_DIG+FM33_CORE_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + LDO16 { + regulator-name = "CAM_S_ANA_2.8V"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + LDO17 { + regulator-name = "VCC_3.0V_LCD"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + }; + + BUCK1 { + regulator-name = "VINT_1.1V"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + }; + + BUCK2 { + regulator-name = "VG3D_1.1V"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + }; + + BUCK3 { + regulator-name = "VCC_1.8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + BUCK4 { + regulator-name = "VMEM_1.2V"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-always-on; + }; + + EN32KHz-AP { + regulator-name = "32KHz AP"; + regulator-always-on; + }; + + EN32KHz-CP { + regulator-name = "32KHz CP"; + }; + + ENVICHG { + regulator-name = "VICHG"; + }; + + ESAFEOUT1 { + regulator-name = "SAFEOUT1"; + }; + + ESAFEOUT2 { + regulator-name = "SAFEOUT2"; + regulator-boot-on; + }; + }; + }; + }; diff --git a/dts/Bindings/mfd/mediatek,mt6357.yaml b/dts/Bindings/mfd/mediatek,mt6357.yaml new file mode 100644 index 0000000000..37423c2e0f --- /dev/null +++ b/dts/Bindings/mfd/mediatek,mt6357.yaml @@ -0,0 +1,114 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/mediatek,mt6357.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: MediaTek MT6357 PMIC + +maintainers: + - Flora Fu <flora.fu@mediatek.com> + - Alexandre Mergnat <amergnat@baylibre.com> + +description: | + MT6357 is a power management system chip containing 5 buck + converters and 29 LDOs. Supported features are audio codec, + USB battery charging, fuel gauge, RTC + + This is a multifunction device with the following sub modules: + - Regulator + - RTC + - Keys + + It is interfaced to host controller using SPI interface by a proprietary hardware + called PMIC wrapper or pwrap. This MFD is a child device of pwrap. + See the following for pwrap node definitions: + Documentation/devicetree/bindings/soc/mediatek/mediatek,pwrap.yaml + +properties: + compatible: + const: mediatek,mt6357 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 2 + + regulators: + type: object + $ref: /schemas/regulator/mediatek,mt6357-regulator.yaml + unevaluatedProperties: false + description: + List of MT6357 BUCKs and LDOs regulators. + + rtc: + type: object + $ref: /schemas/rtc/rtc.yaml# + unevaluatedProperties: false + description: + MT6357 Real Time Clock. + properties: + compatible: + const: mediatek,mt6357-rtc + start-year: true + required: + - compatible + + keys: + type: object + $ref: /schemas/input/mediatek,pmic-keys.yaml + unevaluatedProperties: false + description: + MT6357 power and home keys. + +required: + - compatible + - regulators + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + pwrap { + pmic { + compatible = "mediatek,mt6357"; + + interrupt-parent = <&pio>; + interrupts = <145 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <2>; + + regulators { + mt6357_vproc_reg: buck-vproc { + regulator-name = "vproc"; + regulator-min-microvolt = <518750>; + regulator-max-microvolt = <1312500>; + regulator-ramp-delay = <6250>; + regulator-enable-ramp-delay = <220>; + regulator-always-on; + }; + + // ... + + mt6357_vusb33_reg: ldo-vusb33 { + regulator-name = "vusb33"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3100000>; + regulator-enable-ramp-delay = <264>; + }; + }; + + rtc { + compatible = "mediatek,mt6357-rtc"; + }; + + keys { + compatible = "mediatek,mt6357-keys"; + }; + }; + }; diff --git a/dts/Bindings/mfd/mediatek,mt6370.yaml b/dts/Bindings/mfd/mediatek,mt6370.yaml index 5644882db2..c9574b2430 100644 --- a/dts/Bindings/mfd/mediatek,mt6370.yaml +++ b/dts/Bindings/mfd/mediatek,mt6370.yaml @@ -35,6 +35,7 @@ properties: adc: type: object + additionalProperties: false description: | Provides 9 channels for system monitoring, including VBUSDIV5 (lower accuracy, higher measure range), VBUSDIV2 (higher accuracy, lower @@ -73,6 +74,7 @@ properties: regulators: type: object + additionalProperties: false description: | List all supported regulators, which support the control for DisplayBias voltages and one general purpose LDO which commonly used to drive the diff --git a/dts/Bindings/mfd/mscc,ocelot.yaml b/dts/Bindings/mfd/mscc,ocelot.yaml index 1d1fee1a16..8bd1abfc44 100644 --- a/dts/Bindings/mfd/mscc,ocelot.yaml +++ b/dts/Bindings/mfd/mscc,ocelot.yaml @@ -57,6 +57,15 @@ patternProperties: enum: - mscc,ocelot-miim + "^ethernet-switch@[0-9a-f]+$": + type: object + $ref: /schemas/net/mscc,vsc7514-switch.yaml + unevaluatedProperties: false + properties: + compatible: + enum: + - mscc,vsc7512-switch + required: - compatible - reg diff --git a/dts/Bindings/mfd/mt6397.txt b/dts/Bindings/mfd/mt6397.txt index 518986c448..10540aa7af 100644 --- a/dts/Bindings/mfd/mt6397.txt +++ b/dts/Bindings/mfd/mt6397.txt @@ -13,7 +13,7 @@ MT6397/MT6323 is a multifunction device with the following sub modules: It is interfaced to host controller using SPI interface by a proprietary hardware called PMIC wrapper or pwrap. MT6397/MT6323 MFD is a child device of pwrap. See the following for pwarp node definitions: -../soc/mediatek/pwrap.txt +../soc/mediatek/mediatek,pwrap.yaml This document describes the binding for MFD device and its sub module. @@ -22,8 +22,9 @@ compatible: "mediatek,mt6323" for PMIC MT6323 "mediatek,mt6331" for PMIC MT6331 and MT6332 "mediatek,mt6357" for PMIC MT6357 - "mediatek,mt6358" for PMIC MT6358 and MT6366 + "mediatek,mt6358" for PMIC MT6358 "mediatek,mt6359" for PMIC MT6359 + "mediatek,mt6366", "mediatek,mt6358" for PMIC MT6366 "mediatek,mt6397" for PMIC MT6397 Optional subnodes: @@ -40,6 +41,7 @@ Optional subnodes: - compatible: "mediatek,mt6323-regulator" see ../regulator/mt6323-regulator.txt - compatible: "mediatek,mt6358-regulator" + - compatible: "mediatek,mt6366-regulator", "mediatek-mt6358-regulator" see ../regulator/mt6358-regulator.txt - compatible: "mediatek,mt6397-regulator" see ../regulator/mt6397-regulator.txt diff --git a/dts/Bindings/mfd/nxp,bbnsm.yaml b/dts/Bindings/mfd/nxp,bbnsm.yaml new file mode 100644 index 0000000000..b1ade64a15 --- /dev/null +++ b/dts/Bindings/mfd/nxp,bbnsm.yaml @@ -0,0 +1,101 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/nxp,bbnsm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP Battery-Backed Non-Secure Module + +maintainers: + - Jacky Bai <ping.bai@nxp.com> + +description: | + NXP BBNSM serves as non-volatile logic and storage for the system. + it Intergrates RTC & ON/OFF control. + The RTC can retain its state and continues counting even when the + main chip is power down. A time alarm is generated once the most + significant 32 bits of the real-time counter match the value in the + Time Alarm register. + The ON/OFF logic inside the BBNSM allows for connecting directly to + a PMIC or other voltage regulator device. both smart PMIC mode and + Dumb PMIC mode supported. + +properties: + compatible: + items: + - enum: + - nxp,imx93-bbnsm + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + rtc: + type: object + $ref: /schemas/rtc/rtc.yaml# + + properties: + compatible: + enum: + - nxp,imx93-bbnsm-rtc + + interrupts: + maxItems: 1 + + start-year: true + + required: + - compatible + - interrupts + + additionalProperties: false + + pwrkey: + type: object + $ref: /schemas/input/input.yaml# + + properties: + compatible: + enum: + - nxp,imx93-bbnsm-pwrkey + + interrupts: + maxItems: 1 + + linux,code: true + + required: + - compatible + - interrupts + + additionalProperties: false + +required: + - compatible + - reg + - rtc + - pwrkey + +additionalProperties: false + +examples: + - | + #include <dt-bindings/input/linux-event-codes.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + + bbnsm: bbnsm@44440000 { + compatible = "nxp,imx93-bbnsm", "syscon", "simple-mfd"; + reg = <0x44440000 0x10000>; + + bbnsm_rtc: rtc { + compatible = "nxp,imx93-bbnsm-rtc"; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + }; + + bbnsm_pwrkey: pwrkey { + compatible = "nxp,imx93-bbnsm-pwrkey"; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + linux,code = <KEY_POWER>; + }; + }; diff --git a/dts/Bindings/mfd/omap-usb-host.txt b/dts/Bindings/mfd/omap-usb-host.txt index aa1eaa5958..a0d8c30c26 100644 --- a/dts/Bindings/mfd/omap-usb-host.txt +++ b/dts/Bindings/mfd/omap-usb-host.txt @@ -64,8 +64,8 @@ Required properties if child node exists: Properties for children: The OMAP HS USB Host subsystem contains EHCI and OHCI controllers. -See Documentation/devicetree/bindings/usb/ehci-omap.txt and -Documentation/devicetree/bindings/usb/ohci-omap3.txt. +See Documentation/devicetree/bindings/usb/generic-ehci.yaml and +Documentation/devicetree/bindings/usb/generic-ohci.yaml. Example for OMAP4: @@ -78,14 +78,14 @@ usbhshost: usbhshost@4a064000 { ranges; usbhsohci: ohci@4a064800 { - compatible = "ti,ohci-omap3", "usb-ohci"; + compatible = "ti,ohci-omap3"; reg = <0x4a064800 0x400>; interrupt-parent = <&gic>; interrupts = <0 76 0x4>; }; usbhsehci: ehci@4a064c00 { - compatible = "ti,ehci-omap", "usb-ehci"; + compatible = "ti,ehci-omap"; reg = <0x4a064c00 0x400>; interrupt-parent = <&gic>; interrupts = <0 77 0x4>; diff --git a/dts/Bindings/mfd/qcom,pm8008.yaml b/dts/Bindings/mfd/qcom,pm8008.yaml index e6a2387d86..0c75d8bde5 100644 --- a/dts/Bindings/mfd/qcom,pm8008.yaml +++ b/dts/Bindings/mfd/qcom,pm8008.yaml @@ -7,7 +7,7 @@ $schema: http://devicetree.org/meta-schemas/core.yaml# title: Qualcomm Technologies, Inc. PM8008 PMIC maintainers: - - Guru Das Srinagesh <gurus@codeaurora.org> + - Guru Das Srinagesh <quic_gurus@quicinc.com> description: | Qualcomm Technologies, Inc. PM8008 is a dedicated camera PMIC that integrates @@ -99,10 +99,12 @@ examples: - | #include <dt-bindings/mfd/qcom-pm8008.h> #include <dt-bindings/interrupt-controller/irq.h> - qupv3_se13_i2c { + + i2c { #address-cells = <1>; #size-cells = <0>; - pm8008i@8 { + + pmic@8 { compatible = "qcom,pm8008"; reg = <0x8>; #address-cells = <1>; diff --git a/dts/Bindings/mfd/qcom,spmi-pmic.yaml b/dts/Bindings/mfd/qcom,spmi-pmic.yaml index 37d16e16f4..8103fb61a1 100644 --- a/dts/Bindings/mfd/qcom,spmi-pmic.yaml +++ b/dts/Bindings/mfd/qcom,spmi-pmic.yaml @@ -33,6 +33,7 @@ properties: compatible: items: - enum: + - qcom,pm2250 - qcom,pm6125 - qcom,pm6150 - qcom,pm6150l @@ -40,10 +41,12 @@ properties: - qcom,pm660 - qcom,pm660l - qcom,pm7250b + - qcom,pm7550ba - qcom,pm7325 - qcom,pm8004 - qcom,pm8005 - qcom,pm8009 + - qcom,pm8010 - qcom,pm8019 - qcom,pm8028 - qcom,pm8110 @@ -55,29 +58,42 @@ properties: - qcom,pm8350 - qcom,pm8350b - qcom,pm8350c + - qcom,pm8450 + - qcom,pm8550 + - qcom,pm8550b + - qcom,pm8550ve + - qcom,pm8550vs - qcom,pm8841 - qcom,pm8909 - qcom,pm8916 + - qcom,pm8937 - qcom,pm8941 - qcom,pm8950 - qcom,pm8953 - qcom,pm8994 - qcom,pm8998 - qcom,pma8084 + - qcom,pmc8180 + - qcom,pmc8180c - qcom,pmd9635 + - qcom,pmi632 - qcom,pmi8950 - qcom,pmi8962 - qcom,pmi8994 - qcom,pmi8998 - qcom,pmk8002 - qcom,pmk8350 + - qcom,pmk8550 - qcom,pmm8155au + - qcom,pmm8654au - qcom,pmp8074 - qcom,pmr735a - qcom,pmr735b + - qcom,pmr735d - qcom,pms405 - qcom,pmx55 - qcom,pmx65 + - qcom,pmx75 - qcom,smb2351 - const: qcom,spmi-pmic @@ -108,6 +124,7 @@ patternProperties: type: object oneOf: - $ref: /schemas/iio/adc/qcom,spmi-iadc.yaml# + - $ref: /schemas/iio/adc/qcom,spmi-rradc.yaml# - $ref: /schemas/iio/adc/qcom,spmi-vadc.yaml# "^adc-tm@[0-9a-f]+$": @@ -116,18 +133,37 @@ patternProperties: "^audio-codec@[0-9a-f]+$": type: object - additionalProperties: true # FIXME qcom,pm8916-wcd-analog-codec binding not converted yet + $ref: /schemas/sound/qcom,pm8916-wcd-analog-codec.yaml# + + "^battery@[0-9a-f]+$": + type: object + oneOf: + - $ref: /schemas/power/supply/qcom,pm8916-bms-vm.yaml# "^charger@[0-9a-f]+$": type: object oneOf: + - $ref: /schemas/power/supply/qcom,pm8916-lbc.yaml# - $ref: /schemas/power/supply/qcom,pm8941-charger.yaml# - $ref: /schemas/power/supply/qcom,pm8941-coincell.yaml# + - $ref: /schemas/power/supply/qcom,pmi8998-charger.yaml# "gpio@[0-9a-f]+$": type: object $ref: /schemas/pinctrl/qcom,pmic-gpio.yaml# + "^led-controller@[0-9a-f]+$": + type: object + $ref: /schemas/leds/qcom,spmi-flash-led.yaml# + + "^nvram@[0-9a-f]+$": + type: object + $ref: /schemas/nvmem/qcom,spmi-sdam.yaml# + + "phy@[0-9a-f]+$": + type: object + $ref: /schemas/phy/qcom,snps-eusb2-repeater.yaml# + "pon@[0-9a-f]+$": type: object $ref: /schemas/power/reset/qcom,pon.yaml# @@ -140,6 +176,10 @@ patternProperties: type: object $ref: /schemas/thermal/qcom,spmi-temp-alarm.yaml# + "^typec@[0-9a-f]+$": + type: object + $ref: /schemas/usb/qcom,pmic-typec.yaml# + "^usb-detect@[0-9a-f]+$": type: object $ref: /schemas/extcon/qcom,pm8941-misc.yaml# @@ -206,13 +246,13 @@ examples: interrupt-controller; #interrupt-cells = <4>; - pmi8998_lsid0: pmic@2 { + pmic@2 { compatible = "qcom,pmi8998", "qcom,spmi-pmic"; reg = <0x2 SPMI_USID>; #address-cells = <1>; #size-cells = <0>; - pmi8998_gpio: gpio@c000 { + gpio@c000 { compatible = "qcom,pmi8998-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; @@ -269,12 +309,12 @@ examples: #size-cells = <0>; #io-channel-cells = <1>; - adc-chan@6 { + channel@6 { reg = <ADC5_DIE_TEMP>; label = "die_temp"; }; - adc-chan@4f { + channel@4f { reg = <ADC5_AMUX_THM3_100K_PU>; qcom,ratiometric; qcom,hw-settle-time = <200>; @@ -297,7 +337,7 @@ examples: }; }; - pm6150_gpio: gpio@c000 { + gpio@c000 { compatible = "qcom,pm6150-gpio", "qcom,spmi-gpio"; reg = <0xc000>; gpio-controller; diff --git a/dts/Bindings/mfd/qcom,tcsr.yaml b/dts/Bindings/mfd/qcom,tcsr.yaml index adcae6c007..798705ab6a 100644 --- a/dts/Bindings/mfd/qcom,tcsr.yaml +++ b/dts/Bindings/mfd/qcom,tcsr.yaml @@ -25,12 +25,22 @@ properties: - qcom,sc8280xp-tcsr - qcom,sdm630-tcsr - qcom,sdm845-tcsr + - qcom,sdx55-tcsr + - qcom,sdx65-tcsr + - qcom,sm4450-tcsr - qcom,sm8150-tcsr + - qcom,sm8250-tcsr + - qcom,sm8350-tcsr + - qcom,sm8450-tcsr - qcom,tcsr-apq8064 - qcom,tcsr-apq8084 + - qcom,tcsr-ipq5332 - qcom,tcsr-ipq6018 - qcom,tcsr-ipq8064 + - qcom,tcsr-ipq8074 + - qcom,tcsr-ipq9574 - qcom,tcsr-mdm9615 + - qcom,tcsr-msm8226 - qcom,tcsr-msm8660 - qcom,tcsr-msm8916 - qcom,tcsr-msm8953 diff --git a/dts/Bindings/mfd/qcom-pm8xxx.yaml b/dts/Bindings/mfd/qcom-pm8xxx.yaml index 9acad9d326..7fe3875a59 100644 --- a/dts/Bindings/mfd/qcom-pm8xxx.yaml +++ b/dts/Bindings/mfd/qcom-pm8xxx.yaml @@ -43,13 +43,37 @@ properties: interrupt-controller: true patternProperties: + "gpio@[0-9a-f]+$": + type: object + $ref: /schemas/pinctrl/qcom,pmic-gpio.yaml# + + "keypad@[0-9a-f]+$": + type: object + $ref: /schemas/input/qcom,pm8921-keypad.yaml# + "led@[0-9a-f]+$": type: object $ref: /schemas/leds/qcom,pm8058-led.yaml# + "mpps@[0-9a-f]+$": + type: object + $ref: /schemas/pinctrl/qcom,pmic-mpp.yaml# + + "pwrkey@[0-9a-f]+$": + type: object + $ref: /schemas/input/qcom,pm8921-pwrkey.yaml# + "rtc@[0-9a-f]+$": type: object - $ref: "../rtc/qcom-pm8xxx-rtc.yaml" + $ref: /schemas/rtc/qcom-pm8xxx-rtc.yaml# + + "vibrator@[0-9a-f]+$": + type: object + $ref: /schemas/input/qcom,pm8xxx-vib.yaml# + + "xoadc@[0-9a-f]+$": + type: object + $ref: /schemas/iio/adc/qcom,pm8018-adc.yaml# required: - compatible diff --git a/dts/Bindings/mfd/qcom-rpm.txt b/dts/Bindings/mfd/qcom-rpm.txt deleted file mode 100644 index b823b86252..0000000000 --- a/dts/Bindings/mfd/qcom-rpm.txt +++ /dev/null @@ -1,283 +0,0 @@ -Qualcomm Resource Power Manager (RPM) - -This driver is used to interface with the Resource Power Manager (RPM) found in -various Qualcomm platforms. The RPM allows each component in the system to vote -for state of the system resources, such as clocks, regulators and bus -frequencies. - -- compatible: - Usage: required - Value type: <string> - Definition: must be one of: - "qcom,rpm-apq8064" - "qcom,rpm-msm8660" - "qcom,rpm-msm8960" - "qcom,rpm-ipq8064" - "qcom,rpm-mdm9615" - -- reg: - Usage: required - Value type: <prop-encoded-array> - Definition: base address and size of the RPM's message ram - -- interrupts: - Usage: required - Value type: <prop-encoded-array> - Definition: three entries specifying the RPM's: - 1. acknowledgement interrupt - 2. error interrupt - 3. wakeup interrupt - -- interrupt-names: - Usage: required - Value type: <string-array> - Definition: must be the three strings "ack", "err" and "wakeup", in order - -- qcom,ipc: - Usage: required - Value type: <prop-encoded-array> - - Definition: three entries specifying the outgoing ipc bit used for - signaling the RPM: - - phandle to a syscon node representing the apcs registers - - u32 representing offset to the register within the syscon - - u32 representing the ipc bit within the register - - -= SUBNODES - -The RPM exposes resources to its subnodes. The below bindings specify the set -of valid subnodes that can operate on these resources. - -== Regulators - -Regulator nodes are identified by their compatible: - -- compatible: - Usage: required - Value type: <string> - Definition: must be one of: - "qcom,rpm-pm8058-regulators" - "qcom,rpm-pm8901-regulators" - "qcom,rpm-pm8921-regulators" - "qcom,rpm-pm8018-regulators" - "qcom,rpm-smb208-regulators" - -- vdd_l0_l1_lvs-supply: -- vdd_l2_l11_l12-supply: -- vdd_l3_l4_l5-supply: -- vdd_l6_l7-supply: -- vdd_l8-supply: -- vdd_l9-supply: -- vdd_l10-supply: -- vdd_l13_l16-supply: -- vdd_l14_l15-supply: -- vdd_l17_l18-supply: -- vdd_l19_l20-supply: -- vdd_l21-supply: -- vdd_l22-supply: -- vdd_l23_l24_l25-supply: -- vdd_ncp-supply: -- vdd_s0-supply: -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_s4-supply: - Usage: optional (pm8058 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -- lvs0_in-supply: -- lvs1_in-supply: -- lvs2_in-supply: -- lvs3_in-supply: -- mvs_in-supply: -- vdd_l0-supply: -- vdd_l1-supply: -- vdd_l2-supply: -- vdd_l3-supply: -- vdd_l4-supply: -- vdd_l5-supply: -- vdd_l6-supply: -- vdd_s0-supply: -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s3-supply: -- vdd_s4-supply: - Usage: optional (pm8901 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -- vdd_l1_l2_l12_l18-supply: -- vdd_l3_l15_l17-supply: -- vdd_l4_l14-supply: -- vdd_l5_l8_l16-supply: -- vdd_l6_l7-supply: -- vdd_l9_l11-supply: -- vdd_l10_l22-supply: -- vdd_l21_l23_l29-supply: -- vdd_l24-supply: -- vdd_l25-supply: -- vdd_l26-supply: -- vdd_l27-supply: -- vdd_l28-supply: -- vdd_ncp-supply: -- vdd_s1-supply: -- vdd_s2-supply: -- vdd_s4-supply: -- vdd_s5-supply: -- vdd_s6-supply: -- vdd_s7-supply: -- vdd_s8-supply: -- vin_5vs-supply: -- vin_lvs1_3_6-supply: -- vin_lvs2-supply: -- vin_lvs4_5_7-supply: - Usage: optional (pm8921 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -- vin_lvs1-supply: -- vdd_l7-supply: -- vdd_l8-supply: -- vdd_l9_l10_l11_l12-supply: - Usage: optional (pm8018 only) - Value type: <phandle> - Definition: reference to regulator supplying the input pin, as - described in the data sheet - -The regulator node houses sub-nodes for each regulator within the device. Each -sub-node is identified using the node's name, with valid values listed for each -of the pmics below. - -pm8058: - l0, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15, - l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, s0, s1, s2, s3, s4, - lvs0, lvs1, ncp - -pm8901: - l0, l1, l2, l3, l4, l5, l6, s0, s1, s2, s3, s4, lvs0, lvs1, lvs2, lvs3, - mvs - -pm8921: - s1, s2, s3, s4, s7, s8, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, - l12, l14, l15, l16, l17, l18, l21, l22, l23, l24, l25, l26, l27, l28, - l29, lvs1, lvs2, lvs3, lvs4, lvs5, lvs6, lvs7, usb-switch, hdmi-switch, - ncp - -pm8018: - s1, s2, s3, s4, s5, , l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, - l12, l14, lvs1 - -smb208: - s1a, s1b, s2a, s2b - -The content of each sub-node is defined by the standard binding for regulators - -see regulator.txt - with additional custom properties described below: - -=== Switch-mode Power Supply regulator custom properties - -- bias-pull-down: - Usage: optional - Value type: <empty> - Definition: enable pull down of the regulator when inactive - -- qcom,switch-mode-frequency: - Usage: required - Value type: <u32> - Definition: Frequency (Hz) of the switch-mode power supply; - must be one of: - 19200000, 9600000, 6400000, 4800000, 3840000, 3200000, - 2740000, 2400000, 2130000, 1920000, 1750000, 1600000, - 1480000, 1370000, 1280000, 1200000 - -- qcom,force-mode: - Usage: optional (default if no other qcom,force-mode is specified) - Value type: <u32> - Definition: indicates that the regulator should be forced to a - particular mode, valid values are: - QCOM_RPM_FORCE_MODE_NONE - do not force any mode - QCOM_RPM_FORCE_MODE_LPM - force into low power mode - QCOM_RPM_FORCE_MODE_HPM - force into high power mode - QCOM_RPM_FORCE_MODE_AUTO - allow regulator to automatically - select its own mode based on - realtime current draw, only for: - pm8921 smps and ftsmps - -- qcom,power-mode-hysteretic: - Usage: optional - Value type: <empty> - Definition: select that the power supply should operate in hysteretic - mode, instead of the default pwm mode - -=== Low-dropout regulator custom properties - -- bias-pull-down: - Usage: optional - Value type: <empty> - Definition: enable pull down of the regulator when inactive - -- qcom,force-mode: - Usage: optional - Value type: <u32> - Definition: indicates that the regulator should not be forced to any - particular mode, valid values are: - QCOM_RPM_FORCE_MODE_NONE - do not force any mode - QCOM_RPM_FORCE_MODE_LPM - force into low power mode - QCOM_RPM_FORCE_MODE_HPM - force into high power mode - QCOM_RPM_FORCE_MODE_BYPASS - set regulator to use bypass - mode, i.e. to act as a switch - and not regulate, only for: - pm8921 pldo, nldo and nldo1200 - -=== Negative Charge Pump custom properties - -- qcom,switch-mode-frequency: - Usage: required - Value type: <u32> - Definition: Frequency (Hz) of the switch mode power supply; - must be one of: - 19200000, 9600000, 6400000, 4800000, 3840000, 3200000, - 2740000, 2400000, 2130000, 1920000, 1750000, 1600000, - 1480000, 1370000, 1280000, 1200000 - -= EXAMPLE - - #include <dt-bindings/mfd/qcom-rpm.h> - - rpm@108000 { - compatible = "qcom,rpm-msm8960"; - reg = <0x108000 0x1000>; - qcom,ipc = <&apcs 0x8 2>; - - interrupts = <0 19 0>, <0 21 0>, <0 22 0>; - interrupt-names = "ack", "err", "wakeup"; - - regulators { - compatible = "qcom,rpm-pm8921-regulators"; - vdd_l1_l2_l12_l18-supply = <&pm8921_s4>; - - s1 { - regulator-min-microvolt = <1225000>; - regulator-max-microvolt = <1225000>; - - bias-pull-down; - - qcom,switch-mode-frequency = <3200000>; - }; - - pm8921_s4: s4 { - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - - qcom,switch-mode-frequency = <1600000>; - bias-pull-down; - - qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>; - }; - }; - }; - diff --git a/dts/Bindings/mfd/richtek,rt5033.yaml b/dts/Bindings/mfd/richtek,rt5033.yaml new file mode 100644 index 0000000000..386b1a5015 --- /dev/null +++ b/dts/Bindings/mfd/richtek,rt5033.yaml @@ -0,0 +1,138 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/richtek,rt5033.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Richtek RT5033 Power Management Integrated Circuit + +maintainers: + - Jakob Hauser <jahau@rocketmail.com> + +description: + RT5033 is a multifunction device which includes battery charger, fuel gauge, + flash LED current source, LDO and synchronous Buck converter for portable + applications. It is interfaced to host controller using I2C interface. The + battery fuel gauge uses a separate I2C bus. + +properties: + compatible: + const: richtek,rt5033 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + regulators: + description: + The regulators of RT5033 have to be instantiated under a sub-node named + "regulators". For SAFE_LDO voltage there is only one value of 4.9 V. LDO + voltage ranges from 1.2 V to 3.0 V in 0.1 V steps. BUCK voltage ranges + from 1.0 V to 3.0 V in 0.1 V steps. + type: object + patternProperties: + "^(SAFE_LDO|LDO|BUCK)$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + additionalProperties: false + + charger: + type: object + $ref: /schemas/power/supply/richtek,rt5033-charger.yaml# + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + battery: battery { + compatible = "simple-battery"; + precharge-current-microamp = <450000>; + constant-charge-current-max-microamp = <1000000>; + charge-term-current-microamp = <150000>; + precharge-upper-limit-microvolt = <3500000>; + constant-charge-voltage-max-microvolt = <4350000>; + }; + + extcon { + usb_con: connector { + compatible = "usb-b-connector"; + label = "micro-USB"; + type = "micro"; + }; + }; + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + fuel-gauge@35 { + compatible = "richtek,rt5033-battery"; + reg = <0x35>; + + interrupt-parent = <&msmgpio>; + interrupts = <121 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&fg_alert_default>; + + power-supplies = <&rt5033_charger>; + }; + }; + + i2c@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + pmic@34 { + compatible = "richtek,rt5033"; + reg = <0x34>; + + interrupt-parent = <&msmgpio>; + interrupts = <62 IRQ_TYPE_EDGE_FALLING>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_default>; + + regulators { + safe_ldo_reg: SAFE_LDO { + regulator-name = "SAFE_LDO"; + regulator-min-microvolt = <4900000>; + regulator-max-microvolt = <4900000>; + regulator-always-on; + }; + ldo_reg: LDO { + regulator-name = "LDO"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + buck_reg: BUCK { + regulator-name = "BUCK"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; + + rt5033_charger: charger { + compatible = "richtek,rt5033-charger"; + monitored-battery = <&battery>; + richtek,usb-connector = <&usb_con>; + }; + }; + }; + }; diff --git a/dts/Bindings/mfd/rockchip,rk805.yaml b/dts/Bindings/mfd/rockchip,rk805.yaml index 4992f71b6f..44f8188360 100644 --- a/dts/Bindings/mfd/rockchip,rk805.yaml +++ b/dts/Bindings/mfd/rockchip,rk805.yaml @@ -42,9 +42,12 @@ properties: rockchip,system-power-controller: type: boolean + deprecated: true description: Telling whether or not this PMIC is controlling the system power. + system-power-controller: true + wakeup-source: type: boolean description: @@ -80,6 +83,7 @@ properties: "^(DCDC_REG[1-4]|LDO_REG[1-3])$": type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false unevaluatedProperties: false allOf: diff --git a/dts/Bindings/mfd/rockchip,rk806.yaml b/dts/Bindings/mfd/rockchip,rk806.yaml new file mode 100644 index 0000000000..3c2b06629b --- /dev/null +++ b/dts/Bindings/mfd/rockchip,rk806.yaml @@ -0,0 +1,408 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/rockchip,rk806.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: RK806 Power Management Integrated Circuit + +maintainers: + - Sebastian Reichel <sebastian.reichel@collabora.com> + +description: + Rockchip RK806 series PMIC. This device consists of an spi or + i2c controlled MFD that includes multiple switchable regulators. + +properties: + compatible: + enum: + - rockchip,rk806 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + + system-power-controller: true + + vcc1-supply: + description: + The input supply for dcdc-reg1. + + vcc2-supply: + description: + The input supply for dcdc-reg2. + + vcc3-supply: + description: + The input supply for dcdc-reg3. + + vcc4-supply: + description: + The input supply for dcdc-reg4. + + vcc5-supply: + description: + The input supply for dcdc-reg5. + + vcc6-supply: + description: + The input supply for dcdc-reg6. + + vcc7-supply: + description: + The input supply for dcdc-reg7. + + vcc8-supply: + description: + The input supply for dcdc-reg8. + + vcc9-supply: + description: + The input supply for dcdc-reg9. + + vcc10-supply: + description: + The input supply for dcdc-reg10. + + vcc11-supply: + description: + The input supply for pldo-reg1, pldo-reg2 and pldo-reg3. + + vcc12-supply: + description: + The input supply for pldo-reg4 and pldo-reg5. + + vcc13-supply: + description: + The input supply for nldo-reg1, nldo-reg2 and nldo-reg3. + + vcc14-supply: + description: + The input supply for nldo-reg4 and nldo-reg5. + + vcca-supply: + description: + The input supply for pldo-reg6. + + regulators: + type: object + additionalProperties: false + patternProperties: + "^(dcdc-reg([1-9]|10)|pldo-reg[1-6]|nldo-reg[1-5])$": + type: object + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false + +patternProperties: + '-pins$': + type: object + additionalProperties: false + $ref: /schemas/pinctrl/pinmux-node.yaml + + properties: + function: + enum: [pin_fun0, pin_fun1, pin_fun2, pin_fun3, pin_fun4, pin_fun5] + + pins: + $ref: /schemas/types.yaml#/definitions/string + enum: [gpio_pwrctrl1, gpio_pwrctrl2, gpio_pwrctrl3] + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml + +required: + - compatible + - reg + - interrupts + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/pinctrl/rockchip.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/gpio/gpio.h> + spi { + #address-cells = <1>; + #size-cells = <0>; + + pmic@0 { + compatible = "rockchip,rk806"; + reg = <0x0>; + + interrupts = <7 IRQ_TYPE_LEVEL_LOW>; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc5-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc5v0_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc_2v0_pldo_s3>; + vcc12-supply = <&vcc5v0_sys>; + vcc13-supply = <&vcc5v0_sys>; + vcc14-supply = <&vcc_1v1_nldo_s3>; + vcca-supply = <&vcc5v0_sys>; + + regulators { + vdd_gpu_s0: dcdc-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_npu_s0: dcdc-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_npu_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log_s0: dcdc-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_log_s0"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd_vdenc_s0: dcdc-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <550000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu_mem_s0: dcdc-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_gpu_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_npu_mem_s0: dcdc-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_npu_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_2v0_pldo_s3: dcdc-reg7 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <2000000>; + regulator-max-microvolt = <2000000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_2v0_pldo_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <2000000>; + }; + }; + + vdd_vdenc_mem_s0: dcdc-reg8 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <675000>; + regulator-max-microvolt = <950000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_vdenc_mem_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd2_ddr_s3: dcdc-reg9 { + regulator-always-on; + regulator-boot-on; + regulator-name = "vdd2_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v1_nldo_s3: dcdc-reg10 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_1v1_nldo_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1100000>; + }; + }; + + avcc_1v8_s0: pldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "avcc_1v8_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd1_1v8_ddr_s3: pldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd1_1v8_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_1v8_s3: pldo-reg3 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_1v8_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_3v3_s0: pldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vcc_3v3_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vccio_sd_s0: pldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-ramp-delay = <12500>; + regulator-name = "vccio_sd_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + master_pldo6_s3: pldo-reg6 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-name = "master_pldo6_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_0v75_s3: nldo-reg1 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-ramp-delay = <12500>; + regulator-name = "vdd_0v75_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <750000>; + }; + }; + + vdd2l_0v9_ddr_s3: nldo-reg2 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-name = "vdd2l_0v9_ddr_s3"; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <900000>; + }; + }; + + master_nldo3: nldo-reg3 { + regulator-name = "master_nldo3"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + avdd_0v75_s0: nldo-reg4 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <750000>; + regulator-name = "avdd_0v75_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_0v85_s0: nldo-reg5 { + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-name = "vdd_0v85_s0"; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + }; diff --git a/dts/Bindings/mfd/rockchip,rk808.yaml b/dts/Bindings/mfd/rockchip,rk808.yaml index f5908fa01a..d2ac6fbd5c 100644 --- a/dts/Bindings/mfd/rockchip,rk808.yaml +++ b/dts/Bindings/mfd/rockchip,rk808.yaml @@ -37,9 +37,12 @@ properties: rockchip,system-power-controller: type: boolean + deprecated: true description: Telling whether or not this PMIC is controlling the system power. + system-power-controller: true + wakeup-source: type: boolean description: @@ -107,6 +110,7 @@ properties: "^(DCDC_REG[1-4]|LDO_REG[1-8]|SWITCH_REG[1-2])$": type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false unevaluatedProperties: false required: diff --git a/dts/Bindings/mfd/rockchip,rk809.yaml b/dts/Bindings/mfd/rockchip,rk809.yaml index 7fb849ac74..839c0521f1 100644 --- a/dts/Bindings/mfd/rockchip,rk809.yaml +++ b/dts/Bindings/mfd/rockchip,rk809.yaml @@ -37,9 +37,12 @@ properties: rockchip,system-power-controller: type: boolean + deprecated: true description: Telling whether or not this PMIC is controlling the system power. + system-power-controller: true + wakeup-source: type: boolean description: @@ -86,7 +89,8 @@ properties: patternProperties: "^(LDO_REG[1-9]|DCDC_REG[1-5]|SWITCH_REG[1-2])$": type: object - $ref: ../regulator/regulator.yaml# + $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false unevaluatedProperties: false allOf: diff --git a/dts/Bindings/mfd/rockchip,rk817.yaml b/dts/Bindings/mfd/rockchip,rk817.yaml index 269fb85b20..92b1592e89 100644 --- a/dts/Bindings/mfd/rockchip,rk817.yaml +++ b/dts/Bindings/mfd/rockchip,rk817.yaml @@ -38,9 +38,12 @@ properties: rockchip,system-power-controller: type: boolean + deprecated: true description: Telling whether or not this PMIC is controlling the system power. + system-power-controller: true + wakeup-source: type: boolean description: diff --git a/dts/Bindings/mfd/rockchip,rk818.yaml b/dts/Bindings/mfd/rockchip,rk818.yaml index b57c4b005c..fd4b9de364 100644 --- a/dts/Bindings/mfd/rockchip,rk818.yaml +++ b/dts/Bindings/mfd/rockchip,rk818.yaml @@ -37,9 +37,12 @@ properties: rockchip,system-power-controller: type: boolean + deprecated: true description: Telling whether or not this PMIC is controlling the system power. + system-power-controller: true + wakeup-source: type: boolean description: @@ -99,6 +102,7 @@ properties: "^(DCDC_REG[1-4]|DCDC_BOOST|LDO_REG[1-9]|SWITCH_REG|HDMI_SWITCH|OTG_SWITCH)$": type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false unevaluatedProperties: false required: diff --git a/dts/Bindings/mfd/rohm,bd71815-pmic.yaml b/dts/Bindings/mfd/rohm,bd71815-pmic.yaml index d6d120a780..05747e0125 100644 --- a/dts/Bindings/mfd/rohm,bd71815-pmic.yaml +++ b/dts/Bindings/mfd/rohm,bd71815-pmic.yaml @@ -46,7 +46,7 @@ properties: rohm,clkout-open-drain: description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos". - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1 diff --git a/dts/Bindings/mfd/rohm,bd71828-pmic.yaml b/dts/Bindings/mfd/rohm,bd71828-pmic.yaml index ec3adcd348..11089aa89e 100644 --- a/dts/Bindings/mfd/rohm,bd71828-pmic.yaml +++ b/dts/Bindings/mfd/rohm,bd71828-pmic.yaml @@ -46,7 +46,7 @@ properties: rohm,clkout-open-drain: description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos". - $ref: "/schemas/types.yaml#/definitions/uint32" + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 0 maximum: 1 diff --git a/dts/Bindings/mfd/rohm,bd71847-pmic.yaml b/dts/Bindings/mfd/rohm,bd71847-pmic.yaml index 7ab7b2c7f3..d783cc4e4e 100644 --- a/dts/Bindings/mfd/rohm,bd71847-pmic.yaml +++ b/dts/Bindings/mfd/rohm,bd71847-pmic.yaml @@ -130,7 +130,6 @@ dependencies: examples: - | #include <dt-bindings/interrupt-controller/irq.h> - #include <dt-bindings/leds/common.h> i2c { #address-cells = <1>; diff --git a/dts/Bindings/mfd/rohm,bd9576-pmic.yaml b/dts/Bindings/mfd/rohm,bd9576-pmic.yaml index 10f207a381..b7b323b1a4 100644 --- a/dts/Bindings/mfd/rohm,bd9576-pmic.yaml +++ b/dts/Bindings/mfd/rohm,bd9576-pmic.yaml @@ -34,7 +34,7 @@ properties: BD9576 and BD9573 VOUT1 regulator enable state can be individually controlled by a GPIO. This is dictated by state of vout1-en pin during the PMIC startup. If vout1-en is LOW during PMIC startup then the VOUT1 - enable sate is controlled via this pin. Set this property if vout1-en + enable state is controlled via this pin. Set this property if vout1-en is wired to be down at PMIC start-up. type: boolean @@ -61,7 +61,7 @@ properties: rohm,hw-timeout-ms: maxItems: 2 description: - Watchog timeout in milliseconds. If single value is given it is + Watchdog timeout in milliseconds. If single value is given it is the maximum timeout. Eg. if pinging watchdog is not done within this time limit the watchdog will be triggered. If two values are given watchdog is configured in "window mode". Then first value is limit for short-ping diff --git a/dts/Bindings/mfd/samsung,exynos5433-lpass.yaml b/dts/Bindings/mfd/samsung,exynos5433-lpass.yaml index b97b068487..f154103f32 100644 --- a/dts/Bindings/mfd/samsung,exynos5433-lpass.yaml +++ b/dts/Bindings/mfd/samsung,exynos5433-lpass.yaml @@ -85,7 +85,7 @@ examples: }; i2s@11440000 { - compatible = "samsung,exynos7-i2s"; + compatible = "samsung,exynos5433-i2s", "samsung,exynos7-i2s"; reg = <0x11440000 0x100>; dmas = <&adma 0>, <&adma 2>; dma-names = "tx", "rx"; diff --git a/dts/Bindings/mfd/samsung,s5m8767.yaml b/dts/Bindings/mfd/samsung,s5m8767.yaml index 10c7b408f3..aea0b7d57d 100644 --- a/dts/Bindings/mfd/samsung,s5m8767.yaml +++ b/dts/Bindings/mfd/samsung,s5m8767.yaml @@ -153,29 +153,18 @@ dependencies: additionalProperties: false allOf: - - if: + - not: required: - s5m8767,pmic-buck2-uses-gpio-dvs - then: - properties: - s5m8767,pmic-buck3-uses-gpio-dvs: false - s5m8767,pmic-buck4-uses-gpio-dvs: false - - - if: - required: - s5m8767,pmic-buck3-uses-gpio-dvs - then: - properties: - s5m8767,pmic-buck2-uses-gpio-dvs: false - s5m8767,pmic-buck4-uses-gpio-dvs: false - - - if: + - not: required: + - s5m8767,pmic-buck2-uses-gpio-dvs + - s5m8767,pmic-buck4-uses-gpio-dvs + - not: + required: + - s5m8767,pmic-buck3-uses-gpio-dvs - s5m8767,pmic-buck4-uses-gpio-dvs - then: - properties: - s5m8767,pmic-buck2-uses-gpio-dvs: false - s5m8767,pmic-buck3-uses-gpio-dvs: false examples: - | diff --git a/dts/Bindings/mfd/sprd,ums512-glbreg.yaml b/dts/Bindings/mfd/sprd,ums512-glbreg.yaml index 996bd4a17c..a750fa23d7 100644 --- a/dts/Bindings/mfd/sprd,ums512-glbreg.yaml +++ b/dts/Bindings/mfd/sprd,ums512-glbreg.yaml @@ -19,7 +19,9 @@ description: properties: compatible: items: - - const: sprd,ums512-glbregs + - enum: + - sprd,ums512-glbregs + - sprd,ums9620-glbregs - const: syscon - const: simple-mfd diff --git a/dts/Bindings/mfd/st,stmpe.yaml b/dts/Bindings/mfd/st,stmpe.yaml new file mode 100644 index 0000000000..b77cc3f307 --- /dev/null +++ b/dts/Bindings/mfd/st,stmpe.yaml @@ -0,0 +1,297 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/st,stmpe.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: STMicroelectonics Port Expander (STMPE) + +description: STMicroelectronics Port Expander (STMPE) is a series of slow + bus controllers for various expanded peripherals such as GPIO, keypad, + touchscreen, ADC, PWM or rotator. It can contain one or several different + peripherals connected to SPI or I2C. + +maintainers: + - Linus Walleij <linus.walleij@linaro.org> + +allOf: + - $ref: /schemas/spi/spi-peripheral-props.yaml# + +properties: + compatible: + enum: + - st,stmpe601 + - st,stmpe801 + - st,stmpe811 + - st,stmpe1600 + - st,stmpe1601 + - st,stmpe2401 + - st,stmpe2403 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + vcc-supply: true + + vio-supply: true + + reset-gpios: + maxItems: 1 + + wakeup-source: true + + st,autosleep-timeout: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 4, 16, 32, 64, 128, 256, 512, 1024 ] + description: Time idle before going to automatic sleep to save power + + st,sample-time: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3, 4, 5, 6 ] + description: | + Sample time per iteration + 0 = 36 clock ticks + 1 = 44 clock ticks + 2 = 56 clock ticks + 3 = 64 clock ticks + 4 = 80 clock ticks - recommended + 5 = 96 clock ticks + 6 = 124 clock ticks + + st,mod-12b: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: ADC bit mode 0 = 10bit ADC, 1 = 12bit ADC + + st,ref-sel: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: ADC reference source 0 = internal, 1 = external + + st,adc-freq: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + description: | + ADC clock speed + 0 = 1.625 MHz + 1 = 3.25 MHz + 2, 3 = 6.5 MHz + + adc: + type: object + $ref: /schemas/iio/adc/st,stmpe-adc.yaml# + + gpio: + type: object + $ref: /schemas/gpio/st,stmpe-gpio.yaml# + + keyboard-controller: + type: object + $ref: /schemas/input/matrix-keymap.yaml# + + unevaluatedProperties: false + + properties: + compatible: + const: st,stmpe-keypad + + debounce-interval: + description: Debouncing interval in milliseconds + $ref: /schemas/types.yaml#/definitions/uint32 + + st,no-autorepeat: + description: If present, the keys will not autorepeat when pressed + $ref: /schemas/types.yaml#/definitions/flag + + st,scan-count: + description: Scanning cycles elapsed before key data is updated + $ref: /schemas/types.yaml#/definitions/uint32 + + required: + - compatible + - linux,keymap + + pwm: + type: object + $ref: /schemas/pwm/pwm.yaml# + + unevaluatedProperties: false + + properties: + compatible: + const: st,stmpe-pwm + + "#pwm-cells": + const: 2 + + touchscreen: + type: object + $ref: /schemas/input/touchscreen/touchscreen.yaml# + + unevaluatedProperties: false + + properties: + compatible: + const: st,stmpe-ts + + st,ave-ctrl: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3 ] + description: | + Sample average control + 0 = 1 sample + 1 = 2 samples + 2 = 4 samples + 3 = 8 samples + + st,touch-det-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ] + description: | + Touch detection delay + 0 = 10 us + 1 = 50 us + 2 = 100 us + 3 = 500 us - recommended + 4 = 1 ms + 5 = 5 ms + 6 = 10 ms + 7 = 50 ms + + st,settling: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ] + description: | + Panel driver settling time + 0 = 10 us + 1 = 100 us + 2 = 500 us - recommended + 3 = 1 ms + 4 = 5 ms + 5 = 10 ms + 6 = 50 ms + 7 = 100 ms + + st,fraction-z: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2, 3, 4, 5, 6, 7 ] + description: Length of the fractional part in z, recommended is 7 + (fraction-z ([0..7]) = Count of the fractional part) + + st,i-drive: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1 ] + description: | + current limit value of the touchscreen drivers + 0 = 20 mA (typical 35 mA max) + 1 = 50 mA (typical 80 mA max) + + required: + - compatible + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + +examples: + - | + #include <dt-bindings/gpio/gpio.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/input/input.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + port-expander@43 { + compatible = "st,stmpe2401"; + reg = <0x43>; + reset-gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio>; + vcc-supply = <&db8500_vsmps2_reg>; + vio-supply = <&db8500_vsmps2_reg>; + wakeup-source; + st,autosleep-timeout = <1024>; + + gpio { + compatible = "st,stmpe-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + st,norequest-mask = <0xf0f002>; + }; + + keyboard-controller { + compatible = "st,stmpe-keypad"; + debounce-interval = <64>; + st,scan-count = <8>; + st,no-autorepeat; + keypad,num-rows = <8>; + keypad,num-columns = <8>; + linux,keymap = < + MATRIX_KEY(0x00, 0x00, KEY_1) + MATRIX_KEY(0x00, 0x01, KEY_2) + MATRIX_KEY(0x00, 0x02, KEY_3) + MATRIX_KEY(0x00, 0x03, KEY_4) + MATRIX_KEY(0x00, 0x04, KEY_5) + MATRIX_KEY(0x00, 0x05, KEY_6) + MATRIX_KEY(0x00, 0x06, KEY_7) + MATRIX_KEY(0x00, 0x07, KEY_8) + MATRIX_KEY(0x00, 0x08, KEY_9) + MATRIX_KEY(0x00, 0x09, KEY_0) + >; + }; + + pwm { + compatible = "st,stmpe-pwm"; + #pwm-cells = <2>; + }; + }; + + port-expander@41 { + compatible = "st,stmpe811"; + reg = <0x41>; + interrupts = <10 IRQ_TYPE_LEVEL_LOW>; + interrupt-parent = <&gpio>; + st,adc-freq = <1>; + st,mod-12b = <1>; + st,ref-sel = <0>; + st,sample-time = <4>; + + adc { + compatible = "st,stmpe-adc"; + st,norequest-mask = <0x0f>; + #io-channel-cells = <1>; + }; + + gpio { + compatible = "st,stmpe-gpio"; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; + + pwm { + compatible = "st,stmpe-pwm"; + #pwm-cells = <2>; + }; + + touchscreen { + compatible = "st,stmpe-ts"; + st,ave-ctrl = <3>; + st,touch-det-delay = <5>; + st,settling = <3>; + st,fraction-z = <7>; + st,i-drive = <1>; + }; + }; + }; +... diff --git a/dts/Bindings/mfd/st,stpmic1.yaml b/dts/Bindings/mfd/st,stpmic1.yaml index 9573e4af94..b17ebeb0a4 100644 --- a/dts/Bindings/mfd/st,stpmic1.yaml +++ b/dts/Bindings/mfd/st,stpmic1.yaml @@ -106,6 +106,7 @@ properties: const: st,stpmic1-regulators ldo3: + $ref: /schemas/regulator/regulator.yaml type: object properties: @@ -128,6 +129,7 @@ properties: additionalProperties: false ldo4: + $ref: /schemas/regulator/regulator.yaml type: object properties: @@ -142,11 +144,14 @@ properties: regulator-name: true regulator-boot-on: true regulator-always-on: true + regulator-min-microvolt: true + regulator-max-microvolt: true regulator-over-current-protection: true additionalProperties: false vref_ddr: + $ref: /schemas/regulator/regulator.yaml type: object properties: @@ -165,6 +170,7 @@ properties: additionalProperties: false boost: + $ref: /schemas/regulator/regulator.yaml type: object properties: @@ -184,13 +190,11 @@ properties: additionalProperties: false patternProperties: - "^(buck[1-4]|ldo[1-6]|boost|pwr_sw[1-2])-supply$": + "^(buck[1-4]|ldo[1-6]|vref_ddr|boost|pwr_sw[1-2])-supply$": description: STPMIC1 voltage regulators supplies - "^(buck[1-4]|ldo[1-6]|boost|vref_ddr|pwr_sw[1-2])$": - $ref: ../regulator/regulator.yaml - "^ldo[1-2,5-6]$": + $ref: /schemas/regulator/regulator.yaml type: object properties: @@ -213,6 +217,7 @@ properties: additionalProperties: false "^buck[1-4]$": + $ref: /schemas/regulator/regulator.yaml type: object properties: @@ -237,6 +242,7 @@ properties: additionalProperties: false "^pwr_sw[1-2]$": + $ref: /schemas/regulator/regulator.yaml type: object properties: diff --git a/dts/Bindings/mfd/stericsson,ab8500.yaml b/dts/Bindings/mfd/stericsson,ab8500.yaml index 6c8d42f27f..94f9767a92 100644 --- a/dts/Bindings/mfd/stericsson,ab8500.yaml +++ b/dts/Bindings/mfd/stericsson,ab8500.yaml @@ -313,7 +313,7 @@ properties: - const: audioclk stericsson,earpeice-cmv: - description: Earpeice voltage + description: Earpiece voltage $ref: /schemas/types.yaml#/definitions/uint32 enum: [ 950, 1100, 1270, 1580 ] @@ -337,39 +337,39 @@ properties: with power. ab8500_ldo_aux1: - description: The voltage for the auxilary LDO regulator 1 + description: The voltage for the auxiliary LDO regulator 1 type: object $ref: ../regulator/regulator.yaml# unevaluatedProperties: false ab8500_ldo_aux2: - description: The voltage for the auxilary LDO regulator 2 + description: The voltage for the auxiliary LDO regulator 2 type: object $ref: ../regulator/regulator.yaml# unevaluatedProperties: false ab8500_ldo_aux3: - description: The voltage for the auxilary LDO regulator 3 + description: The voltage for the auxiliary LDO regulator 3 type: object $ref: ../regulator/regulator.yaml# unevaluatedProperties: false ab8500_ldo_aux4: - description: The voltage for the auxilary LDO regulator 4 + description: The voltage for the auxiliary LDO regulator 4 only present on AB8505 type: object $ref: ../regulator/regulator.yaml# unevaluatedProperties: false ab8500_ldo_aux5: - description: The voltage for the auxilary LDO regulator 5 + description: The voltage for the auxiliary LDO regulator 5 only present on AB8505 type: object $ref: ../regulator/regulator.yaml# unevaluatedProperties: false ab8500_ldo_aux6: - description: The voltage for the auxilary LDO regulator 6 + description: The voltage for the auxiliary LDO regulator 6 only present on AB8505 type: object $ref: ../regulator/regulator.yaml# @@ -378,7 +378,7 @@ properties: # There is never any AUX7 regulator which is confusing ab8500_ldo_aux8: - description: The voltage for the auxilary LDO regulator 8 + description: The voltage for the auxiliary LDO regulator 8 only present on AB8505 type: object $ref: ../regulator/regulator.yaml# diff --git a/dts/Bindings/mfd/stericsson,db8500-prcmu.yaml b/dts/Bindings/mfd/stericsson,db8500-prcmu.yaml index 1d4d88f7e8..cb2a42caab 100644 --- a/dts/Bindings/mfd/stericsson,db8500-prcmu.yaml +++ b/dts/Bindings/mfd/stericsson,db8500-prcmu.yaml @@ -72,44 +72,52 @@ properties: main voltage domain for the chip. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_varm: - description: The voltage for the ARM Cortex A-9 CPU. + description: The voltage for the ARM Cortex-A9 CPU. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_vmodem: description: The voltage for the modem subsystem. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_vpll: description: The voltage for the phase locked loop clocks. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_vsmps1: description: Also known as VIO12, is a step-down voltage regulator for 1.2V I/O. SMPS means System Management Power Source. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_vsmps2: description: Also known as VIO18, is a step-down voltage regulator for 1.8V I/O. SMPS means System Management Power Source. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_vsmps3: description: This is a step-down voltage regulator for 0.87 thru 1.875V I/O. SMPS means System Management Power Source. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_vrf1: - description: RF transciever voltage regulator. + description: RF transceiver voltage regulator. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_sva_mmdsp: description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP) @@ -117,18 +125,21 @@ properties: for video encoding and decoding. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_sva_mmdsp_ret: description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP) voltage regulator for retention mode. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_sva_pipe: description: Smart Video Accelerator (SVA) multimedia DSP (MMDSP) voltage regulator for the data pipe. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_sia_mmdsp: description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP) @@ -136,18 +147,21 @@ properties: for image encoding and decoding. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_sia_mmdsp_ret: description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP) voltage regulator for retention mode. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_sia_pipe: description: Smart Image Accelerator (SIA) multimedia DSP (MMDSP) voltage regulator for the data pipe. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_sga: description: Smart Graphics Accelerator (SGA) voltage regulator. @@ -155,6 +169,7 @@ properties: accelerator block. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_b2r2_mcde: description: Blit Blend Rotate and Rescale (B2R2), and Multi-Channel @@ -162,28 +177,33 @@ properties: blocks. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_esram12: description: Embedded Static RAM (ESRAM) 1 and 2 voltage regulator. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_esram12_ret: description: Embedded Static RAM (ESRAM) 1 and 2 voltage regulator for retention mode. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_esram34: description: Embedded Static RAM (ESRAM) 3 and 4 voltage regulator. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false db8500_esram34_ret: description: Embedded Static RAM (ESRAM) 3 and 4 voltage regulator for retention mode. type: object $ref: ../regulator/regulator.yaml# + unevaluatedProperties: false required: - compatible diff --git a/dts/Bindings/mfd/stmpe.txt b/dts/Bindings/mfd/stmpe.txt deleted file mode 100644 index d4408a4171..0000000000 --- a/dts/Bindings/mfd/stmpe.txt +++ /dev/null @@ -1,42 +0,0 @@ -* ST Microelectronics STMPE Multi-Functional Device - -STMPE is an MFD device which may expose the following inbuilt devices: gpio, -keypad, touchscreen, adc, pwm, rotator. - -Required properties: - - compatible : "st,stmpe[610|801|811|1600|1601|2401|2403]" - - reg : I2C/SPI address of the device - -Optional properties: - - interrupts : The interrupt outputs from the controller - - interrupt-controller : Marks the device node as an interrupt controller - - wakeup-source : Marks the input device as wakable - - st,autosleep-timeout : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024 - - irq-gpio : If present, which GPIO to use for event IRQ - -Optional properties for devices with touch and ADC (STMPE811|STMPE610): - - st,sample-time : ADC conversion time in number of clock. - 0 -> 36 clocks 4 -> 80 clocks (recommended) - 1 -> 44 clocks 5 -> 96 clocks - 2 -> 56 clocks 6 -> 124 clocks - 3 -> 64 clocks - - st,mod-12b : ADC Bit mode - 0 -> 10bit ADC 1 -> 12bit ADC - - st,ref-sel : ADC reference source - 0 -> internal 1 -> external - - st,adc-freq : ADC Clock speed - 0 -> 1.625 MHz 2 || 3 -> 6.5 MHz - 1 -> 3.25 MHz - -Example: - - stmpe1601: stmpe1601@40 { - compatible = "st,stmpe1601"; - reg = <0x40>; - interrupts = <26 0x4>; - interrupt-parent = <&gpio6>; - interrupt-controller; - - wakeup-source; - st,autosleep-timeout = <1024>; - }; diff --git a/dts/Bindings/mfd/syscon.yaml b/dts/Bindings/mfd/syscon.yaml index 1b01bd0104..084b5c2a2a 100644 --- a/dts/Bindings/mfd/syscon.yaml +++ b/dts/Bindings/mfd/syscon.yaml @@ -38,6 +38,7 @@ properties: - allwinner,sun8i-h3-system-controller - allwinner,sun8i-v3s-system-controller - allwinner,sun50i-a64-system-controller + - amd,pensando-elba-syscon - brcm,cru-clkset - freecom,fsg-cs2-system-controller - fsl,imx93-aonmix-ns-syscfg @@ -46,17 +47,23 @@ properties: - hisilicon,hi6220-sramctrl - hisilicon,pcie-sas-subctrl - hisilicon,peri-subctrl + - hpe,gxp-sysreg - intel,lgm-syscon + - loongson,ls1b-syscon + - loongson,ls1c-syscon - marvell,armada-3700-usb2-host-misc - mediatek,mt8135-pctl-a-syscfg - mediatek,mt8135-pctl-b-syscfg + - mediatek,mt8365-syscfg - microchip,lan966x-cpu-syscon - microchip,sparx5-cpu-syscon - mstar,msc313-pmsleep + - nuvoton,ma35d1-sys - nuvoton,wpcm450-shm - rockchip,px30-qos - rockchip,rk3036-qos - rockchip,rk3066-qos + - rockchip,rk3128-qos - rockchip,rk3228-qos - rockchip,rk3288-qos - rockchip,rk3368-qos @@ -64,12 +71,8 @@ properties: - rockchip,rk3568-qos - rockchip,rk3588-qos - rockchip,rv1126-qos - - samsung,exynos3-sysreg - - samsung,exynos4-sysreg - - samsung,exynos5-sysreg - - samsung,exynos5433-sysreg - - samsung,exynos850-sysreg - - samsung,exynosautov9-sysreg + - starfive,jh7100-sysmain + - ti,am654-dss-oldi-io-ctrl - const: syscon @@ -87,6 +90,9 @@ properties: on the device. enum: [1, 2, 4, 8] + resets: + maxItems: 1 + hwlocks: maxItems: 1 description: diff --git a/dts/Bindings/mfd/ti,am3359-tscadc.yaml b/dts/Bindings/mfd/ti,am3359-tscadc.yaml index 23a63265be..70b5dfce07 100644 --- a/dts/Bindings/mfd/ti,am3359-tscadc.yaml +++ b/dts/Bindings/mfd/ti,am3359-tscadc.yaml @@ -61,8 +61,6 @@ required: - interrupts - clocks - clock-names - - dmas - - dma-names additionalProperties: false diff --git a/dts/Bindings/mfd/ti,j721e-system-controller.yaml b/dts/Bindings/mfd/ti,j721e-system-controller.yaml index 76ef4352e1..e6289fbe69 100644 --- a/dts/Bindings/mfd/ti,j721e-system-controller.yaml +++ b/dts/Bindings/mfd/ti,j721e-system-controller.yaml @@ -62,6 +62,12 @@ patternProperties: description: The phy node corresponding to the ethernet MAC. + "^chipid@[0-9a-f]+$": + type: object + $ref: /schemas/hwinfo/ti,k3-socinfo.yaml# + description: + The node corresponding to SoC chip identification. + required: - compatible - reg @@ -95,9 +101,14 @@ examples: }; clock-controller@4140 { - compatible = "ti,am654-ehrpwm-tbclk", "syscon"; + compatible = "ti,am654-ehrpwm-tbclk"; reg = <0x4140 0x18>; #clock-cells = <1>; }; + + chipid@14 { + compatible = "ti,am654-chipid"; + reg = <0x14 0x4>; + }; }; ... diff --git a/dts/Bindings/mfd/ti,lp87524-q1.yaml b/dts/Bindings/mfd/ti,lp87524-q1.yaml index f6cac4b107..ae149eb859 100644 --- a/dts/Bindings/mfd/ti,lp87524-q1.yaml +++ b/dts/Bindings/mfd/ti,lp87524-q1.yaml @@ -37,6 +37,7 @@ properties: "^buck[0123]$": type: object $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false required: - buck0 diff --git a/dts/Bindings/mfd/ti,lp87561-q1.yaml b/dts/Bindings/mfd/ti,lp87561-q1.yaml index dc5a29b5ef..5167d6eb90 100644 --- a/dts/Bindings/mfd/ti,lp87561-q1.yaml +++ b/dts/Bindings/mfd/ti,lp87561-q1.yaml @@ -41,6 +41,7 @@ properties: buck3210: type: object $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false required: - buck3210 diff --git a/dts/Bindings/mfd/ti,lp87565-q1.yaml b/dts/Bindings/mfd/ti,lp87565-q1.yaml index 012d251110..eca430edf6 100644 --- a/dts/Bindings/mfd/ti,lp87565-q1.yaml +++ b/dts/Bindings/mfd/ti,lp87565-q1.yaml @@ -47,6 +47,7 @@ properties: "^buck(10|23)$": type: object $ref: /schemas/regulator/regulator.yaml# + unevaluatedProperties: false required: - buck10 diff --git a/dts/Bindings/mfd/ti,nspire-misc.yaml b/dts/Bindings/mfd/ti,nspire-misc.yaml new file mode 100644 index 0000000000..28cd5164d4 --- /dev/null +++ b/dts/Bindings/mfd/ti,nspire-misc.yaml @@ -0,0 +1,51 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022-2023 Texas Instruments Incorporated - https://www.ti.com/ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ti,nspire-misc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI Nspire MISC hardware block + +maintainers: + - Andrew Davis <afd@ti.com> + +description: + System controller node represents a register region containing a set + of miscellaneous registers. The registers are not cohesive enough to + represent as any specific type of device. Currently there is a reset + controller. + +properties: + compatible: + items: + - enum: + - ti,nspire-misc + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + reboot: + $ref: /schemas/power/reset/syscon-reboot.yaml# + +required: + - compatible + - reg + - reboot + +additionalProperties: false + +examples: + - | + misc: misc@900a0000 { + compatible = "ti,nspire-misc", "syscon", "simple-mfd"; + reg = <0x900a0000 0x1000>; + + reboot { + compatible = "syscon-reboot"; + offset = <0x08>; + value = <0x02>; + }; + }; diff --git a/dts/Bindings/mfd/ti,tps65086.yaml b/dts/Bindings/mfd/ti,tps65086.yaml index 3fdd9cb5b3..bd36a07c17 100644 --- a/dts/Bindings/mfd/ti,tps65086.yaml +++ b/dts/Bindings/mfd/ti,tps65086.yaml @@ -95,7 +95,7 @@ required: examples: - | #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/Bindings/mfd/ti,tps6594.yaml b/dts/Bindings/mfd/ti,tps6594.yaml new file mode 100644 index 0000000000..9d43376beb --- /dev/null +++ b/dts/Bindings/mfd/ti,tps6594.yaml @@ -0,0 +1,193 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ti,tps6594.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TPS6594 Power Management Integrated Circuit + +maintainers: + - Julien Panis <jpanis@baylibre.com> + +description: + TPS6594 is a Power Management IC which provides regulators and others + features like GPIOs, RTC, watchdog, ESMs (Error Signal Monitor), and + PFSM (Pre-configurable Finite State Machine) managing the state of the device. + TPS6594 is the super-set device while TPS6593 and LP8764 are derivatives. + +properties: + compatible: + enum: + - ti,lp8764-q1 + - ti,tps6593-q1 + - ti,tps6594-q1 + + reg: + description: I2C slave address or SPI chip select number. + maxItems: 1 + + ti,primary-pmic: + type: boolean + description: | + Identify the primary PMIC on SPMI bus. + A multi-PMIC synchronization scheme is implemented in the PMIC device + to synchronize the power state changes with other PMIC devices. This is + accomplished through a SPMI bus: the primary PMIC is the controller + device on the SPMI bus, and the secondary PMICs are the target devices + on the SPMI bus. + + system-power-controller: true + + gpio-controller: true + + '#gpio-cells': + const: 2 + description: | + The first cell is the pin number, the second cell is used to specify flags. + See ../gpio/gpio.txt for more information. + + interrupts: + maxItems: 1 + + regulators: + type: object + description: List of regulators provided by this controller. + + patternProperties: + "^buck([1-5]|12|34|123|1234)$": + type: object + $ref: /schemas/regulator/regulator.yaml# + + unevaluatedProperties: false + + "^ldo[1-4]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + + unevaluatedProperties: false + + allOf: + - if: + required: + - buck12 + then: + properties: + buck123: false + buck1234: false + - if: + required: + - buck123 + then: + properties: + buck34: false + - if: + required: + - buck1234 + then: + properties: + buck34: false + + additionalProperties: false + +patternProperties: + "^buck([1-5]|12|34|123|1234)-supply$": + description: Input supply phandle for each buck. + + "^ldo[1-4]-supply$": + description: Input supply phandle for each ldo. + +required: + - compatible + - reg + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + tps6593: pmic@48 { + compatible = "ti,tps6593-q1"; + reg = <0x48>; + ti,primary-pmic; + system-power-controller; + + gpio-controller; + #gpio-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&pmic_irq_pins_default>; + interrupt-parent = <&mcu_gpio0>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + + buck123-supply = <&vcc_3v3_sys>; + buck4-supply = <&vcc_3v3_sys>; + buck5-supply = <&vcc_3v3_sys>; + ldo1-supply = <&vcc_3v3_sys>; + ldo2-supply = <&vcc_3v3_sys>; + ldo3-supply = <&buck5>; + ldo4-supply = <&vcc_3v3_sys>; + + regulators { + buck123: buck123 { + regulator-name = "vcc_core"; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + buck4: buck4 { + regulator-name = "vcc_1v1"; + regulator-min-microvolt = <1100000>; + regulator-max-microvolt = <1100000>; + regulator-boot-on; + regulator-always-on; + }; + + buck5: buck5 { + regulator-name = "vcc_1v8_sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo1: ldo1 { + regulator-name = "vddshv5_sdio"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo2: ldo2 { + regulator-name = "vpp_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3: ldo3 { + regulator-name = "vcc_0v85"; + regulator-min-microvolt = <850000>; + regulator-max-microvolt = <850000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo4: ldo4 { + regulator-name = "vdda_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + }; + }; + }; diff --git a/dts/Bindings/mfd/ti,twl.yaml b/dts/Bindings/mfd/ti,twl.yaml new file mode 100644 index 0000000000..c04d57ba22 --- /dev/null +++ b/dts/Bindings/mfd/ti,twl.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ti,twl.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments TWL family + +maintainers: + - Andreas Kemnade <andreas@kemnade.info> + +description: | + The TWLs are Integrated Power Management Chips. + Some version might contain much more analog function like + USB transceiver or Audio amplifier. + These chips are connected to an i2c bus. + +properties: + compatible: + description: + TWL4030 for integrated power-management/audio CODEC device used in OMAP3 + based boards + TWL6030/32 for integrated power-management used in OMAP4 based boards + enum: + - ti,twl4030 + - ti,twl6030 + - ti,twl6032 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 1 + + "#clock-cells": + const: 1 + +additionalProperties: false + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic@48 { + compatible = "ti,twl6030"; + reg = <0x48>; + interrupts = <39>; /* IRQ_SYS_1N cascaded to gic */ + interrupt-controller; + #interrupt-cells = <1>; + interrupt-parent = <&gic>; + }; + }; + diff --git a/dts/Bindings/mfd/twl-family.txt b/dts/Bindings/mfd/twl-family.txt deleted file mode 100644 index c2f9302965..0000000000 --- a/dts/Bindings/mfd/twl-family.txt +++ /dev/null @@ -1,46 +0,0 @@ -Texas Instruments TWL family - -The TWLs are Integrated Power Management Chips. -Some version might contain much more analog function like -USB transceiver or Audio amplifier. -These chips are connected to an i2c bus. - - -Required properties: -- compatible : Must be "ti,twl4030"; - For Integrated power-management/audio CODEC device used in OMAP3 - based boards -- compatible : Must be "ti,twl6030"; - For Integrated power-management used in OMAP4 based boards -- interrupts : This i2c device has an IRQ line connected to the main SoC -- interrupt-controller : Since the twl support several interrupts internally, - it is considered as an interrupt controller cascaded to the SoC one. -- #interrupt-cells = <1>; - -Optional node: -- Child nodes contain in the twl. The twl family is made of several variants - that support a different number of features. - The children nodes will thus depend of the capability of the variant. - - -Example: -/* - * Integrated Power Management Chip - * https://www.ti.com/lit/ds/symlink/twl6030.pdf - */ -twl@48 { - compatible = "ti,twl6030"; - reg = <0x48>; - interrupts = <39>; /* IRQ_SYS_1N cascaded to gic */ - interrupt-controller; - #interrupt-cells = <1>; - interrupt-parent = <&gic>; - #address-cells = <1>; - #size-cells = <0>; - - twl_rtc { - compatible = "ti,twl_rtc"; - interrupts = <11>; - reg = <0>; - }; -}; diff --git a/dts/Bindings/mfd/wlf,arizona.yaml b/dts/Bindings/mfd/wlf,arizona.yaml index ea3337dafa..7902f3c5d2 100644 --- a/dts/Bindings/mfd/wlf,arizona.yaml +++ b/dts/Bindings/mfd/wlf,arizona.yaml @@ -156,7 +156,7 @@ properties: entry has a value that is out of range for a 16 bit register then the chip default will be used. If present exactly five values must be specified. - $ref: "/schemas/types.yaml#/definitions/uint32-array" + $ref: /schemas/types.yaml#/definitions/uint32-array minItems: 1 maxItems: 5 diff --git a/dts/Bindings/mfd/x-powers,ac100.yaml b/dts/Bindings/mfd/x-powers,ac100.yaml index 309606d2d8..f3d8394b27 100644 --- a/dts/Bindings/mfd/x-powers,ac100.yaml +++ b/dts/Bindings/mfd/x-powers,ac100.yaml @@ -1,8 +1,8 @@ # SPDX-License-Identifier: GPL-2.0 %YAML 1.2 --- -$id: "http://devicetree.org/schemas/mfd/x-powers,ac100.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/mfd/x-powers,ac100.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: X-Powers AC100 diff --git a/dts/Bindings/mfd/x-powers,axp152.yaml b/dts/Bindings/mfd/x-powers,axp152.yaml index b7a8747d5f..06f1779835 100644 --- a/dts/Bindings/mfd/x-powers,axp152.yaml +++ b/dts/Bindings/mfd/x-powers,axp152.yaml @@ -47,9 +47,8 @@ allOf: - x-powers,axp209 then: - not: - required: - - x-powers,drive-vbus-en + properties: + x-powers,drive-vbus-en: false - if: not: @@ -59,39 +58,52 @@ allOf: const: x-powers,axp806 then: - allOf: - - not: - required: - - x-powers,self-working-mode - - - not: - required: - - x-powers,master-mode + properties: + x-powers,self-working-mode: false + x-powers,master-mode: false - if: not: properties: compatible: contains: - const: x-powers,axp305 + enum: + - x-powers,axp15060 + - x-powers,axp305 + - x-powers,axp313a then: required: - interrupts + - if: + properties: + compatible: + contains: + enum: + - x-powers,axp313a + - x-powers,axp15060 + + then: + properties: + x-powers,dcdc-freq: false + properties: compatible: oneOf: - enum: - x-powers,axp152 + - x-powers,axp192 - x-powers,axp202 - x-powers,axp209 - x-powers,axp221 - x-powers,axp223 + - x-powers,axp313a - x-powers,axp803 - x-powers,axp806 - x-powers,axp809 - x-powers,axp813 + - x-powers,axp15060 - items: - const: x-powers,axp228 - const: x-powers,axp221 @@ -260,7 +272,7 @@ properties: Defines the work frequency of DC-DC in kHz. patternProperties: - "^(([a-f])?ldo[0-9]|dcdc[0-7a-e]|ldo(_|-)io(0|1)|(dc1)?sw|rtc(_|-)ldo|drivevbus|dc5ldo)$": + "^(([a-f])?ldo[0-9]|dcdc[0-7a-e]|ldo(_|-)io(0|1)|(dc1)?sw|rtc(_|-)ldo|cpusldo|drivevbus|dc5ldo)$": $ref: /schemas/regulator/regulator.yaml# type: object unevaluatedProperties: false @@ -299,7 +311,7 @@ additionalProperties: false examples: - | - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; @@ -315,7 +327,7 @@ examples: - | #include <dt-bindings/interrupt-controller/irq.h> - i2c0 { + i2c { #address-cells = <1>; #size-cells = <0>; diff --git a/dts/Bindings/mfd/xylon,logicvc.yaml b/dts/Bindings/mfd/xylon,logicvc.yaml index 9efd49c39b..6e880a46d7 100644 --- a/dts/Bindings/mfd/xylon,logicvc.yaml +++ b/dts/Bindings/mfd/xylon,logicvc.yaml @@ -2,8 +2,8 @@ # Copyright 2019 Bootlin %YAML 1.2 --- -$id: "http://devicetree.org/schemas/mfd/xylon,logicvc.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/mfd/xylon,logicvc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Xylon LogiCVC multi-function device |