summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/mfd
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/mfd')
-rw-r--r--dts/Bindings/mfd/ab8500.txt4
-rw-r--r--dts/Bindings/mfd/act8945a.txt2
-rw-r--r--dts/Bindings/mfd/cirrus,lochnagar.yaml10
-rw-r--r--dts/Bindings/mfd/ene-kb3930.yaml55
-rw-r--r--dts/Bindings/mfd/gateworks-gsc.yaml5
-rw-r--r--dts/Bindings/mfd/google,cros-ec.yaml8
-rw-r--r--dts/Bindings/mfd/kontron,sl28cpld.yaml153
-rw-r--r--dts/Bindings/mfd/lp87565.txt79
-rw-r--r--dts/Bindings/mfd/qcom,spmi-pmic.txt2
-rw-r--r--dts/Bindings/mfd/rohm,bd70528-pmic.txt2
-rw-r--r--dts/Bindings/mfd/rohm,bd71847-pmic.yaml9
-rw-r--r--dts/Bindings/mfd/syscon.yaml10
-rw-r--r--dts/Bindings/mfd/ti,j721e-system-controller.yaml9
-rw-r--r--dts/Bindings/mfd/ti,lp87524-q1.yaml112
-rw-r--r--dts/Bindings/mfd/ti,lp87561-q1.yaml83
-rw-r--r--dts/Bindings/mfd/ti,lp87565-q1.yaml101
-rw-r--r--dts/Bindings/mfd/xylon,logicvc.yaml14
17 files changed, 564 insertions, 94 deletions
diff --git a/dts/Bindings/mfd/ab8500.txt b/dts/Bindings/mfd/ab8500.txt
index 5c6eabeed3..d2a6e835c2 100644
--- a/dts/Bindings/mfd/ab8500.txt
+++ b/dts/Bindings/mfd/ab8500.txt
@@ -31,8 +31,8 @@ ab8500-btemp : : vtvout : Battery Temperature
: BAT_CTRL_INDB : : Battery Removal Indicator
: BTEMP_LOW : : Btemp < BtempLow, if battery temperature is lower than -10°C
: BTEMP_LOW_MEDIUM : : BtempLow < Btemp < BtempMedium,if battery temperature is between -10 and 0°C
- : BTEMP_MEDIUM_HIGH : : BtempMedium < Btemp < BtempHigh,if battery temperature is between 0°C and“MaxTemp
- : BTEMP_HIGH : : Btemp > BtempHigh, if battery temperature is higher than “MaxTemp
+ : BTEMP_MEDIUM_HIGH : : BtempMedium < Btemp < BtempHigh,if battery temperature is between 0°C and MaxTemp
+ : BTEMP_HIGH : : Btemp > BtempHigh, if battery temperature is higher than MaxTemp
ab8500-charger : : vddadc : Charger interface
: MAIN_CH_UNPLUG_DET : : main charger unplug detection management (not in 8505)
: MAIN_CHARGE_PLUG_DET : : main charger plug detection management (not in 8505)
diff --git a/dts/Bindings/mfd/act8945a.txt b/dts/Bindings/mfd/act8945a.txt
index e6f168db6c..5ca75d888b 100644
--- a/dts/Bindings/mfd/act8945a.txt
+++ b/dts/Bindings/mfd/act8945a.txt
@@ -71,7 +71,7 @@ Example:
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_charger_chglev &pinctrl_charger_lbo &pinctrl_charger_irq>;
interrupt-parent = <&pioA>;
- interrupts = <45 GPIO_ACTIVE_LOW>;
+ interrupts = <45 IRQ_TYPE_LEVEL_LOW>;
active-semi,chglev-gpios = <&pioA 12 GPIO_ACTIVE_HIGH>;
active-semi,lbo-gpios = <&pioA 72 GPIO_ACTIVE_LOW>;
diff --git a/dts/Bindings/mfd/cirrus,lochnagar.yaml b/dts/Bindings/mfd/cirrus,lochnagar.yaml
index 7a616577ac..c00ad3e21c 100644
--- a/dts/Bindings/mfd/cirrus,lochnagar.yaml
+++ b/dts/Bindings/mfd/cirrus,lochnagar.yaml
@@ -130,6 +130,14 @@ properties:
type: object
$ref: /schemas/pinctrl/cirrus,lochnagar.yaml#
+ lochnagar-hwmon:
+ type: object
+ $ref: /schemas/hwmon/cirrus,lochnagar.yaml#
+
+ lochnagar-sc:
+ type: object
+ $ref: /schemas/sound/cirrus,lochnagar.yaml#
+
VDDCORE:
description:
Initialisation data for the VDDCORE regulator, which supplies the
@@ -249,7 +257,7 @@ required:
- lochnagar-clk
- lochnagar-pinctrl
-unevaluatedProperties: false
+additionalProperties: false
examples:
- |
diff --git a/dts/Bindings/mfd/ene-kb3930.yaml b/dts/Bindings/mfd/ene-kb3930.yaml
new file mode 100644
index 0000000000..074243c408
--- /dev/null
+++ b/dts/Bindings/mfd/ene-kb3930.yaml
@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ene-kb3930.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ENE KB3930 Embedded Controller bindings
+
+description: |
+ This binding describes the ENE KB3930 Embedded Controller attached to an
+ I2C bus.
+
+maintainers:
+ - Lubomir Rintel <lkundrak@v3.sk>
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - dell,wyse-ariel-ec # Dell Wyse Ariel board (3020)
+ - const: ene,kb3930
+ reg:
+ maxItems: 1
+
+ off-gpios:
+ description: GPIO used with the shutdown protocol on Ariel
+ maxItems: 2
+
+ system-power-controller: true
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ embedded-controller@58 {
+ compatible = "dell,wyse-ariel-ec", "ene,kb3930";
+ reg = <0x58>;
+ system-power-controller;
+
+ off-gpios = <&gpio 126 GPIO_ACTIVE_HIGH>,
+ <&gpio 127 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+...
diff --git a/dts/Bindings/mfd/gateworks-gsc.yaml b/dts/Bindings/mfd/gateworks-gsc.yaml
index 9b6eb50606..d08e8fe764 100644
--- a/dts/Bindings/mfd/gateworks-gsc.yaml
+++ b/dts/Bindings/mfd/gateworks-gsc.yaml
@@ -144,9 +144,12 @@ required:
- "#address-cells"
- "#size-cells"
+additionalProperties: false
+
examples:
- |
#include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
@@ -155,7 +158,7 @@ examples:
compatible = "gw,gsc";
reg = <0x20>;
interrupt-parent = <&gpio1>;
- interrupts = <4 GPIO_ACTIVE_LOW>;
+ interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
interrupt-controller;
#interrupt-cells = <1>;
#address-cells = <1>;
diff --git a/dts/Bindings/mfd/google,cros-ec.yaml b/dts/Bindings/mfd/google,cros-ec.yaml
index 6a7279a85e..f49c0d5d31 100644
--- a/dts/Bindings/mfd/google,cros-ec.yaml
+++ b/dts/Bindings/mfd/google,cros-ec.yaml
@@ -30,6 +30,11 @@ properties:
For implementations of the EC is connected through RPMSG.
const: google,cros-ec-rpmsg
+ controller-data:
+ description:
+ SPI controller data, see bindings/spi/spi-samsung.txt
+ type: object
+
google,cros-ec-spi-pre-delay:
description:
This property specifies the delay in usecs between the
@@ -63,6 +68,9 @@ properties:
interrupts:
maxItems: 1
+ wakeup-source:
+ description: Button can wake-up the system.
+
required:
- compatible
diff --git a/dts/Bindings/mfd/kontron,sl28cpld.yaml b/dts/Bindings/mfd/kontron,sl28cpld.yaml
new file mode 100644
index 0000000000..eb3b43547c
--- /dev/null
+++ b/dts/Bindings/mfd/kontron,sl28cpld.yaml
@@ -0,0 +1,153 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/kontron,sl28cpld.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kontron's sl28cpld board management controller
+
+maintainers:
+ - Michael Walle <michael@walle.cc>
+
+description: |
+ The board management controller may contain different IP blocks like
+ watchdog, fan monitoring, PWM controller, interrupt controller and a
+ GPIO controller.
+
+properties:
+ compatible:
+ const: kontron,sl28cpld
+
+ reg:
+ description:
+ I2C device address.
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ "#interrupt-cells":
+ const: 2
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+
+patternProperties:
+ "^gpio(@[0-9a-f]+)?$":
+ $ref: ../gpio/kontron,sl28cpld-gpio.yaml
+
+ "^hwmon(@[0-9a-f]+)?$":
+ $ref: ../hwmon/kontron,sl28cpld-hwmon.yaml
+
+ "^interrupt-controller(@[0-9a-f]+)?$":
+ $ref: ../interrupt-controller/kontron,sl28cpld-intc.yaml
+
+ "^pwm(@[0-9a-f]+)?$":
+ $ref: ../pwm/kontron,sl28cpld-pwm.yaml
+
+ "^watchdog(@[0-9a-f]+)?$":
+ $ref: ../watchdog/kontron,sl28cpld-wdt.yaml
+
+required:
+ - "#address-cells"
+ - "#size-cells"
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sl28cpld@4a {
+ compatible = "kontron,sl28cpld";
+ reg = <0x4a>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ watchdog@4 {
+ compatible = "kontron,sl28cpld-wdt";
+ reg = <0x4>;
+ kontron,assert-wdt-timeout-pin;
+ };
+
+ hwmon@b {
+ compatible = "kontron,sl28cpld-fan";
+ reg = <0xb>;
+ };
+
+ pwm@c {
+ compatible = "kontron,sl28cpld-pwm";
+ reg = <0xc>;
+ #pwm-cells = <2>;
+ };
+
+ pwm@e {
+ compatible = "kontron,sl28cpld-pwm";
+ reg = <0xe>;
+ #pwm-cells = <2>;
+ };
+
+ gpio@10 {
+ compatible = "kontron,sl28cpld-gpio";
+ reg = <0x10>;
+ interrupts-extended = <&gpio2 6
+ IRQ_TYPE_EDGE_FALLING>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "a", "b", "c";
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio@15 {
+ compatible = "kontron,sl28cpld-gpio";
+ reg = <0x15>;
+ interrupts-extended = <&gpio2 6
+ IRQ_TYPE_EDGE_FALLING>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+
+ gpio@1a {
+ compatible = "kontron,sl28cpld-gpo";
+ reg = <0x1a>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ gpio@1b {
+ compatible = "kontron,sl28cpld-gpi";
+ reg = <0x1b>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+
+ interrupt-controller@1c {
+ compatible = "kontron,sl28cpld-intc";
+ reg = <0x1c>;
+ interrupts-extended = <&gpio2 6
+ IRQ_TYPE_EDGE_FALLING>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ };
+ };
+ };
diff --git a/dts/Bindings/mfd/lp87565.txt b/dts/Bindings/mfd/lp87565.txt
deleted file mode 100644
index 41671e0dc2..0000000000
--- a/dts/Bindings/mfd/lp87565.txt
+++ /dev/null
@@ -1,79 +0,0 @@
-TI LP87565 PMIC MFD driver
-
-Required properties:
- - compatible: "ti,lp87565", "ti,lp87565-q1"
- - reg: I2C slave address.
- - gpio-controller: Marks the device node as a GPIO Controller.
- - #gpio-cells: Should be two. The first cell is the pin number and
- the second cell is used to specify flags.
- See ../gpio/gpio.txt for more information.
- - xxx-in-supply: Phandle to parent supply node of each regulator
- populated under regulators node. xxx should match
- the supply_name populated in driver.
-Example:
-
-lp87565_pmic: pmic@60 {
- compatible = "ti,lp87565-q1";
- reg = <0x60>;
- gpio-controller;
- #gpio-cells = <2>;
-
- buck10-in-supply = <&vsys_3v3>;
- buck23-in-supply = <&vsys_3v3>;
-
- regulators: regulators {
- buck10_reg: buck10 {
- /* VDD_MPU */
- regulator-name = "buck10";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1250000>;
- regulator-always-on;
- regulator-boot-on;
- };
-
- buck23_reg: buck23 {
- /* VDD_GPU */
- regulator-name = "buck23";
- regulator-min-microvolt = <850000>;
- regulator-max-microvolt = <1250000>;
- regulator-boot-on;
- regulator-always-on;
- };
- };
-};
-
-TI LP87561 PMIC:
-
-This is a single output 4-phase regulator configuration
-
-Required properties:
- - compatible: "ti,lp87561-q1"
- - reg: I2C slave address.
- - gpio-controller: Marks the device node as a GPIO Controller.
- - #gpio-cells: Should be two. The first cell is the pin number and
- the second cell is used to specify flags.
- See ../gpio/gpio.txt for more information.
- - xxx-in-supply: Phandle to parent supply node of each regulator
- populated under regulators node. xxx should match
- the supply_name populated in driver.
-Example:
-
-lp87561_pmic: pmic@62 {
- compatible = "ti,lp87561-q1";
- reg = <0x62>;
- gpio-controller;
- #gpio-cells = <2>;
-
- buck3210-in-supply = <&vsys_3v3>;
-
- regulators: regulators {
- buck3210_reg: buck3210 {
- /* VDD_CORE */
- regulator-name = "buck3210";
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <800000>;
- regulator-always-on;
- regulator-boot-on;
- };
- };
-};
diff --git a/dts/Bindings/mfd/qcom,spmi-pmic.txt b/dts/Bindings/mfd/qcom,spmi-pmic.txt
index fffc8fde33..79367a43b2 100644
--- a/dts/Bindings/mfd/qcom,spmi-pmic.txt
+++ b/dts/Bindings/mfd/qcom,spmi-pmic.txt
@@ -37,7 +37,7 @@ Required properties:
or generalized "qcom,spmi-pmic".
- reg: Specifies the SPMI USID slave address for this device.
For more information see:
- Documentation/devicetree/bindings/spmi/spmi.txt
+ Documentation/devicetree/bindings/spmi/spmi.yaml
Required properties for peripheral child nodes:
- compatible: Should contain "qcom,xxx", where "xxx" is a peripheral name.
diff --git a/dts/Bindings/mfd/rohm,bd70528-pmic.txt b/dts/Bindings/mfd/rohm,bd70528-pmic.txt
index c3c02ce73c..386eec06cf 100644
--- a/dts/Bindings/mfd/rohm,bd70528-pmic.txt
+++ b/dts/Bindings/mfd/rohm,bd70528-pmic.txt
@@ -39,7 +39,7 @@ pmic: pmic@4b {
compatible = "rohm,bd70528";
reg = <0x4b>;
interrupt-parent = <&gpio1>;
- interrupts = <29 GPIO_ACTIVE_LOW>;
+ interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
clocks = <&osc 0>;
#clock-cells = <0>;
clock-output-names = "bd70528-32k-out";
diff --git a/dts/Bindings/mfd/rohm,bd71847-pmic.yaml b/dts/Bindings/mfd/rohm,bd71847-pmic.yaml
index 77bcca2d41..5d531051a1 100644
--- a/dts/Bindings/mfd/rohm,bd71847-pmic.yaml
+++ b/dts/Bindings/mfd/rohm,bd71847-pmic.yaml
@@ -38,6 +38,9 @@ properties:
"#clock-cells":
const: 0
+ clock-output-names:
+ maxItems: 1
+
# The BD71847 abd BD71850 support two different HW states as reset target
# states. States are called as SNVS and READY. At READY state all the PMIC
# power outputs go down and OTP is reload. At the SNVS state all other logic
@@ -116,12 +119,14 @@ required:
- compatible
- reg
- interrupts
- - clocks
- - "#clock-cells"
- regulators
additionalProperties: false
+dependencies:
+ '#clock-cells': [clocks]
+ clocks: ['#clock-cells']
+
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
diff --git a/dts/Bindings/mfd/syscon.yaml b/dts/Bindings/mfd/syscon.yaml
index 049ec2ffc7..8f4764a9ed 100644
--- a/dts/Bindings/mfd/syscon.yaml
+++ b/dts/Bindings/mfd/syscon.yaml
@@ -38,8 +38,16 @@ properties:
- allwinner,sun8i-h3-system-controller
- allwinner,sun8i-v3s-system-controller
- allwinner,sun50i-a64-system-controller
+ - hisilicon,dsa-subctrl
+ - hisilicon,hi6220-sramctrl
+ - hisilicon,pcie-sas-subctrl
+ - hisilicon,peri-subctrl
- microchip,sparx5-cpu-syscon
- mstar,msc313-pmsleep
+ - samsung,exynos3-sysreg
+ - samsung,exynos4-sysreg
+ - samsung,exynos5-sysreg
+ - samsung,exynos5433-sysreg
- const: syscon
@@ -67,7 +75,7 @@ required:
- compatible
- reg
-unevaluatedProperties: false
+additionalProperties: true
examples:
- |
diff --git a/dts/Bindings/mfd/ti,j721e-system-controller.yaml b/dts/Bindings/mfd/ti,j721e-system-controller.yaml
index c8fd5d3e30..19fcf59fd2 100644
--- a/dts/Bindings/mfd/ti,j721e-system-controller.yaml
+++ b/dts/Bindings/mfd/ti,j721e-system-controller.yaml
@@ -30,6 +30,9 @@ properties:
- const: syscon
- const: simple-mfd
+ reg:
+ maxItems: 1
+
"#address-cells":
const: 1
@@ -38,8 +41,8 @@ properties:
ranges: true
-# Optional children
-
+patternProperties:
+ # Optional children
"^serdes-ln-ctrl@[0-9a-f]+$":
type: object
description: |
@@ -54,7 +57,7 @@ required:
- "#size-cells"
- ranges
-unevaluatedProperties: false
+additionalProperties: false
examples:
- |
diff --git a/dts/Bindings/mfd/ti,lp87524-q1.yaml b/dts/Bindings/mfd/ti,lp87524-q1.yaml
new file mode 100644
index 0000000000..c4fc5345d3
--- /dev/null
+++ b/dts/Bindings/mfd/ti,lp87524-q1.yaml
@@ -0,0 +1,112 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,lp87524-q1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI LP87524-Q1 four 1-phase output buck converter
+
+maintainers:
+ - Keerthy <j-keerthy@ti.com>
+
+properties:
+ compatible:
+ const: ti,lp87524-q1
+
+ reg:
+ description: I2C slave address
+ const: 0x60
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description:
+ The first cell is the pin number.
+ The second cell is is used to specify flags.
+ See ../gpio/gpio.txt for more information.
+ const: 2
+
+ regulators:
+ type: object
+
+ patternProperties:
+ "^buck[0123]$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+
+ required:
+ - buck0
+ - buck1
+ - buck2
+ - buck3
+
+ additionalProperties: false
+
+patternProperties:
+ "^buck[0123]-in-supply$":
+ description: Voltage regulator supply for each BUCK converter
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+ - buck0-in-supply
+ - buck1-in-supply
+ - buck2-in-supply
+ - buck3-in-supply
+ - regulators
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c@0 {
+ reg = <0x0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@60 {
+ compatible = "ti,lp87524-q1";
+ reg = <0x60>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ buck0-in-supply = <&vdd_5v0>;
+ buck1-in-supply = <&vdd_5v0>;
+ buck2-in-supply = <&vdd_5v0>;
+ buck3-in-supply = <&vdd_5v0>;
+
+ regulators {
+ buck0_reg: buck0 {
+ regulator-name = "buck0";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ buck1_reg: buck1 {
+ regulator-name = "buck1";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+
+ buck2_reg: buck2 {
+ regulator-name = "buck2";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <950000>;
+ regulator-always-on;
+ };
+
+ buck3_reg: buck3 {
+ regulator-name = "buck3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+ };
+ };
+ };
+
+...
diff --git a/dts/Bindings/mfd/ti,lp87561-q1.yaml b/dts/Bindings/mfd/ti,lp87561-q1.yaml
new file mode 100644
index 0000000000..a7e57c0913
--- /dev/null
+++ b/dts/Bindings/mfd/ti,lp87561-q1.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,lp87561-q1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI LP87561-Q1 single 4-phase output buck converter
+
+maintainers:
+ - Keerthy <j-keerthy@ti.com>
+
+properties:
+ compatible:
+ const: ti,lp87561-q1
+
+ reg:
+ description: I2C slave address
+ const: 0x60
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description:
+ The first cell is the pin number.
+ The second cell is is used to specify flags.
+ See ../gpio/gpio.txt for more information.
+ const: 2
+
+ buck3210-in-supply:
+ description:
+ Voltage regulator supply for all the four BUCK converters.
+
+ regulators:
+ type: object
+
+ properties:
+ buck3210:
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+
+ required:
+ - buck3210
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+ - buck3210-in-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c@0 {
+ reg = <0x0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@60 {
+ compatible = "ti,lp87561-q1";
+ reg = <0x60>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ buck3210-in-supply = <&vsys_3v3>;
+
+ regulators {
+ buck3210_reg: buck3210 {
+ /* VDD_CORE */
+ regulator-name = "buck3210";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+ };
+ };
+ };
+
+...
diff --git a/dts/Bindings/mfd/ti,lp87565-q1.yaml b/dts/Bindings/mfd/ti,lp87565-q1.yaml
new file mode 100644
index 0000000000..1da6d6a958
--- /dev/null
+++ b/dts/Bindings/mfd/ti,lp87565-q1.yaml
@@ -0,0 +1,101 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mfd/ti,lp87565-q1.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI LP87565-Q1 / LP87565 dual 2-phase output buck converter
+
+maintainers:
+ - Keerthy <j-keerthy@ti.com>
+
+properties:
+ compatible:
+ oneOf:
+ - const: ti,lp87565
+ - const: ti,lp87565-q1
+
+ reg:
+ description: I2C slave address
+ const: 0x60
+
+ gpio-controller: true
+
+ '#gpio-cells':
+ description:
+ The first cell is the pin number.
+ The second cell is is used to specify flags.
+ See ../gpio/gpio.txt for more information.
+ const: 2
+
+ buck10-in-supply:
+ description:
+ Voltage regulator supply for BUCK0 and BUCK1 converters.
+
+ buck23-in-supply:
+ description:
+ Voltage regulator supply for BUCK2 and BUCK3 converters.
+
+ regulators:
+ type: object
+
+ patternProperties:
+ "^buck(10|23)$":
+ type: object
+ $ref: /schemas/regulator/regulator.yaml#
+
+ required:
+ - buck10
+ - buck23
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - '#gpio-cells'
+ - buck10-in-supply
+ - buck23-in-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ i2c@0 {
+ reg = <0x0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@60 {
+ compatible = "ti,lp87565-q1";
+ reg = <0x60>;
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ buck10-in-supply = <&vsys_3v3>;
+ buck23-in-supply = <&vsys_3v3>;
+
+ regulators {
+ buck10_reg: buck10 {
+ /* VDD_MPU */
+ regulator-name = "buck10";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ buck23_reg: buck23 {
+ /* VDD_GPU */
+ regulator-name = "buck23";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
+ };
+
+...
diff --git a/dts/Bindings/mfd/xylon,logicvc.yaml b/dts/Bindings/mfd/xylon,logicvc.yaml
index abc9937506..8a1a6625c7 100644
--- a/dts/Bindings/mfd/xylon,logicvc.yaml
+++ b/dts/Bindings/mfd/xylon,logicvc.yaml
@@ -26,6 +26,12 @@ properties:
reg:
maxItems: 1
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 1
+
select:
properties:
compatible:
@@ -36,15 +42,19 @@ select:
required:
- compatible
+patternProperties:
+ "^gpio@[0-9a-f]+$":
+ $ref: /schemas/gpio/xylon,logicvc-gpio.yaml#
+
required:
- compatible
- reg
+additionalProperties: false
+
examples:
- |
logicvc: logicvc@43c00000 {
compatible = "xylon,logicvc-3.02.a", "syscon", "simple-mfd";
reg = <0x43c00000 0x6000>;
- #address-cells = <1>;
- #size-cells = <1>;
};
generated by cgit v1.2.3 (git 2.39.1) at 2024-04-19 20:04:07 +0000