summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/mfd
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/mfd')
-rw-r--r--dts/Bindings/mfd/aspeed-lpc.txt62
1 files changed, 62 insertions, 0 deletions
diff --git a/dts/Bindings/mfd/aspeed-lpc.txt b/dts/Bindings/mfd/aspeed-lpc.txt
index 514d82c..34dd890 100644
--- a/dts/Bindings/mfd/aspeed-lpc.txt
+++ b/dts/Bindings/mfd/aspeed-lpc.txt
@@ -109,9 +109,50 @@ lpc: lpc@1e789000 {
};
};
+BMC Node Children
+==================
+
+
Host Node Children
==================
+LPC Host Interface Controller
+-------------------
+
+The LPC Host Interface Controller manages functions exposed to the host such as
+LPC firmware hub cycles, configuration of the LPC-to-AHB mapping, UART
+management and bus snoop configuration.
+
+Required properties:
+
+- compatible: One of:
+ "aspeed,ast2400-lpc-ctrl";
+ "aspeed,ast2500-lpc-ctrl";
+
+- reg: contains offset/length values of the host interface controller
+ memory regions
+
+- clocks: contains a phandle to the syscon node describing the clocks.
+ There should then be one cell representing the clock to use
+
+- memory-region: A phandle to a reserved_memory region to be used for the LPC
+ to AHB mapping
+
+- flash: A phandle to the SPI flash controller containing the flash to
+ be exposed over the LPC to AHB mapping
+
+Example:
+
+lpc-host@80 {
+ lpc_ctrl: lpc-ctrl@0 {
+ compatible = "aspeed,ast2500-lpc-ctrl";
+ reg = <0x0 0x80>;
+ clocks = <&syscon ASPEED_CLK_GATE_LCLK>;
+ memory-region = <&flash_memory>;
+ flash = <&spi>;
+ };
+};
+
LPC Host Controller
-------------------
@@ -135,3 +176,24 @@ lhc: lhc@20 {
compatible = "aspeed,ast2500-lhc";
reg = <0x20 0x24 0x48 0x8>;
};
+
+LPC reset control
+-----------------
+
+The UARTs present in the ASPEED SoC can have their resets tied to the reset
+state of the LPC bus. Some systems may chose to modify this configuration.
+
+Required properties:
+
+ - compatible: "aspeed,ast2500-lpc-reset" or
+ "aspeed,ast2400-lpc-reset"
+ - reg: offset and length of the IP in the LHC memory region
+ - #reset-controller indicates the number of reset cells expected
+
+Example:
+
+lpc_reset: reset-controller@18 {
+ compatible = "aspeed,ast2500-lpc-reset";
+ reg = <0x18 0x4>;
+ #reset-cells = <1>;
+};