diff options
Diffstat (limited to 'dts/Bindings/misc')
| -rw-r--r-- | dts/Bindings/misc/brcm,kona-smc.txt | 15 | ||||
| -rw-r--r-- | dts/Bindings/misc/fsl,dpaa2-console.yaml | 2 | ||||
| -rw-r--r-- | dts/Bindings/misc/idt,89hpesx.yaml | 72 | ||||
| -rw-r--r-- | dts/Bindings/misc/idt_89hpesx.txt | 44 | ||||
| -rw-r--r-- | dts/Bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml | 4 | ||||
| -rw-r--r-- | dts/Bindings/misc/olpc,xo1.75-ec.yaml | 2 | ||||
| -rw-r--r-- | dts/Bindings/misc/qcom,fastrpc.txt | 88 | ||||
| -rw-r--r-- | dts/Bindings/misc/qcom,fastrpc.yaml | 146 | ||||
| -rw-r--r-- | dts/Bindings/misc/ti,j721e-esm.yaml | 53 | ||||
| -rw-r--r-- | dts/Bindings/misc/xlnx,sd-fec.txt | 58 | ||||
| -rw-r--r-- | dts/Bindings/misc/xlnx,sd-fec.yaml | 140 | ||||
| -rw-r--r-- | dts/Bindings/misc/xlnx,tmr-inject.yaml | 47 | ||||
| -rw-r--r-- | dts/Bindings/misc/xlnx,tmr-manager.yaml | 47 |
13 files changed, 509 insertions, 209 deletions
diff --git a/dts/Bindings/misc/brcm,kona-smc.txt b/dts/Bindings/misc/brcm,kona-smc.txt deleted file mode 100644 index 05b47232ed..0000000000 --- a/dts/Bindings/misc/brcm,kona-smc.txt +++ /dev/null @@ -1,15 +0,0 @@ -Broadcom Secure Monitor Bounce buffer ------------------------------------------------------ -This binding defines the location of the bounce buffer -used for non-secure to secure communications. - -Required properties: -- compatible : "brcm,kona-smc" -- DEPRECATED: compatible : "bcm,kona-smc" -- reg : Location and size of bounce buffer - -Example: - smc@3404c000 { - compatible = "brcm,bcm11351-smc", "brcm,kona-smc"; - reg = <0x3404c000 0x400>; //1 KiB in SRAM - }; diff --git a/dts/Bindings/misc/fsl,dpaa2-console.yaml b/dts/Bindings/misc/fsl,dpaa2-console.yaml index 8cc951feb7..59b83ea5e0 100644 --- a/dts/Bindings/misc/fsl,dpaa2-console.yaml +++ b/dts/Bindings/misc/fsl,dpaa2-console.yaml @@ -12,7 +12,7 @@ maintainers: properties: compatible: - const: "fsl,dpaa2-console" + const: fsl,dpaa2-console reg: maxItems: 1 diff --git a/dts/Bindings/misc/idt,89hpesx.yaml b/dts/Bindings/misc/idt,89hpesx.yaml new file mode 100644 index 0000000000..452236e793 --- /dev/null +++ b/dts/Bindings/misc/idt,89hpesx.yaml @@ -0,0 +1,72 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/idt,89hpesx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: EEPROM / CSR SMBus-slave interface of IDT 89HPESx devices + +maintainers: + - Serge Semin <fancer.lancer@gmail.com> + +select: + properties: + compatible: + contains: + pattern: '^idt,89hpes' + required: + - compatible + +properties: + compatible: + oneOf: + - pattern: '^idt,89hpes(8nt2|12nt3|12n3a?|24n3a?|(12|24)t3g2|4t4g2|10t4g2|[56]t5|8t5a?)$' + - pattern: '^idt,89hpes(6t6g2|16t7|(24t6|32t8|48t12|16t4a?)(g2)?)$' + - pattern: '^idt,89hpes(24nt6a|32nt8[ab]|12nt12|16nt16|24nt24|32nt24[ab])g2$' + - pattern: '^idt,89hpes((32h8|48h12a?|22h16|34h16|64h16a?)(g2)?|16h16)$' + + reg: + maxItems: 1 + + '#address-cells': + const: 1 + + '#size-cells': + const: 0 + +patternProperties: + '^eeprom@': + $ref: /schemas/eeprom/at24.yaml# + unevaluatedProperties: false + + properties: + compatible: + description: Only a subset of devices are supported + pattern: ',24c(32|64|128|256|512)$' + +required: + - compatible + - reg + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + idt@74 { + compatible = "idt,89hpes32nt8ag2"; + reg = <0x74>; + #address-cells = <1>; + #size-cells = <0>; + + eeprom@50 { + compatible = "atmel,24c64"; + reg = <0x50>; + read-only; + }; + }; + }; +... diff --git a/dts/Bindings/misc/idt_89hpesx.txt b/dts/Bindings/misc/idt_89hpesx.txt deleted file mode 100644 index b9093b79ab..0000000000 --- a/dts/Bindings/misc/idt_89hpesx.txt +++ /dev/null @@ -1,44 +0,0 @@ -EEPROM / CSR SMBus-slave interface of IDT 89HPESx devices - -Required properties: - - compatible : should be "<manufacturer>,<type>" - Basically there is only one manufacturer: idt, but some - compatible devices may be produced in future. Following devices - are supported: 89hpes8nt2, 89hpes12nt3, 89hpes24nt6ag2, - 89hpes32nt8ag2, 89hpes32nt8bg2, 89hpes12nt12g2, 89hpes16nt16g2, - 89hpes24nt24g2, 89hpes32nt24ag2, 89hpes32nt24bg2; - 89hpes12n3, 89hpes12n3a, 89hpes24n3, 89hpes24n3a; - 89hpes32h8, 89hpes32h8g2, 89hpes48h12, 89hpes48h12g2, - 89hpes48h12ag2, 89hpes16h16, 89hpes22h16, 89hpes22h16g2, - 89hpes34h16, 89hpes34h16g2, 89hpes64h16, 89hpes64h16g2, - 89hpes64h16ag2; - 89hpes12t3g2, 89hpes24t3g2, 89hpes16t4, 89hpes4t4g2, - 89hpes10t4g2, 89hpes16t4g2, 89hpes16t4ag2, 89hpes5t5, - 89hpes6t5, 89hpes8t5, 89hpes8t5a, 89hpes24t6, 89hpes6t6g2, - 89hpes24t6g2, 89hpes16t7, 89hpes32t8, 89hpes32t8g2, - 89hpes48t12, 89hpes48t12g2. - - reg : I2C address of the IDT 89HPESx device. - -Optionally there can be EEPROM-compatible subnode: - - compatible: There are five EEPROM devices supported: 24c32, 24c64, 24c128, - 24c256 and 24c512 differed by size. - - reg: Custom address of EEPROM device (If not specified IDT 89HPESx - (optional) device will try to communicate with EEPROM sited by default - address - 0x50) - - read-only : Parameterless property disables writes to the EEPROM - (optional) - -Example: - idt@60 { - compatible = "idt,89hpes32nt8ag2"; - reg = <0x74>; - #address-cells = <1>; - #size-cells = <0>; - - eeprom@50 { - compatible = "onsemi,24c64"; - reg = <0x50>; - read-only; - }; - }; - diff --git a/dts/Bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml b/dts/Bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml index 38ab049910..36a9dbdf3f 100644 --- a/dts/Bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml +++ b/dts/Bindings/misc/intel,ixp4xx-ahb-queue-manager.yaml @@ -2,8 +2,8 @@ # Copyright 2019 Linaro Ltd. %YAML 1.2 --- -$id: "http://devicetree.org/schemas/misc/intel,ixp4xx-ahb-queue-manager.yaml#" -$schema: "http://devicetree.org/meta-schemas/core.yaml#" +$id: http://devicetree.org/schemas/misc/intel,ixp4xx-ahb-queue-manager.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# title: Intel IXP4xx AHB Queue Manager diff --git a/dts/Bindings/misc/olpc,xo1.75-ec.yaml b/dts/Bindings/misc/olpc,xo1.75-ec.yaml index b3c45c046b..e99342f268 100644 --- a/dts/Bindings/misc/olpc,xo1.75-ec.yaml +++ b/dts/Bindings/misc/olpc,xo1.75-ec.yaml @@ -5,7 +5,7 @@ $id: http://devicetree.org/schemas/misc/olpc,xo1.75-ec.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: OLPC XO-1.75 Embedded Controller bindings +title: OLPC XO-1.75 Embedded Controller description: | This binding describes the Embedded Controller acting as a SPI bus master diff --git a/dts/Bindings/misc/qcom,fastrpc.txt b/dts/Bindings/misc/qcom,fastrpc.txt deleted file mode 100644 index 5ec124b138..0000000000 --- a/dts/Bindings/misc/qcom,fastrpc.txt +++ /dev/null @@ -1,88 +0,0 @@ -Qualcomm Technologies, Inc. FastRPC Driver - -The FastRPC implements an IPC (Inter-Processor Communication) -mechanism that allows for clients to transparently make remote method -invocations across DSP and APPS boundaries. This enables developers -to offload tasks to the DSP and free up the application processor for -other tasks. - -- compatible: - Usage: required - Value type: <stringlist> - Definition: must be "qcom,fastrpc" - -- label - Usage: required - Value type: <string> - Definition: should specify the dsp domain name this fastrpc - corresponds to. must be one of this: "adsp", "mdsp", "sdsp", "cdsp" - -- qcom,non-secure-domain: - Usage: required - Value type: <boolean> - Definition: Property to specify that dsp domain is non-secure. - -- qcom,vmids: - Usage: optional - Value type: <u32 array> - Definition: Virtual machine IDs for remote processor. - -- #address-cells - Usage: required - Value type: <u32> - Definition: Must be 1 - -- #size-cells - Usage: required - Value type: <u32> - Definition: Must be 0 - -= COMPUTE BANKS -Each subnode of the Fastrpc represents compute context banks available -on the dsp. -- All Compute context banks MUST contain the following properties: - -- compatible: - Usage: required - Value type: <stringlist> - Definition: must be "qcom,fastrpc-compute-cb" - -- reg - Usage: required - Value type: <u32> - Definition: Context Bank ID. - -- qcom,nsessions: - Usage: Optional - Value type: <u32> - Defination: A value indicating how many sessions can share this - context bank. Defaults to 1 when this property - is not specified. - -Example: - -adsp-pil { - compatible = "qcom,msm8996-adsp-pil"; - ... - smd-edge { - label = "lpass"; - fastrpc { - compatible = "qcom,fastrpc"; - qcom,smd-channels = "fastrpcsmd-apps-dsp"; - label = "adsp"; - #address-cells = <1>; - #size-cells = <0>; - - cb@1 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <1>; - }; - - cb@2 { - compatible = "qcom,fastrpc-compute-cb"; - reg = <2>; - }; - ... - }; - }; -}; diff --git a/dts/Bindings/misc/qcom,fastrpc.yaml b/dts/Bindings/misc/qcom,fastrpc.yaml new file mode 100644 index 0000000000..c27a8f33d8 --- /dev/null +++ b/dts/Bindings/misc/qcom,fastrpc.yaml @@ -0,0 +1,146 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/qcom,fastrpc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm FastRPC Driver + +maintainers: + - Srinivas Kandagatla <srinivas.kandagatla@linaro.org> + +description: | + The FastRPC implements an IPC (Inter-Processor Communication) + mechanism that allows for clients to transparently make remote method + invocations across DSP and APPS boundaries. This enables developers + to offload tasks to the DSP and free up the application processor for + other tasks. + +properties: + compatible: + const: qcom,fastrpc + + label: + enum: + - adsp + - mdsp + - sdsp + - cdsp + + memory-region: + maxItems: 1 + description: + Phandle to a node describing memory to be used for remote heap CMA. + + qcom,glink-channels: + description: + A list of channels tied to this function, used for matching + the function to a set of virtual channels. + $ref: /schemas/types.yaml#/definitions/string-array + items: + - const: fastrpcglink-apps-dsp + + qcom,non-secure-domain: + description: + Used to mark the current domain as non-secure. + type: boolean + + qcom,smd-channels: + description: + Channel name used for the RPM communication + $ref: /schemas/types.yaml#/definitions/string-array + items: + - const: fastrpcsmd-apps-dsp + + qcom,vmids: + description: + Virtual machine IDs for remote processor. + $ref: /schemas/types.yaml#/definitions/uint32-array + + "#address-cells": + const: 1 + + "#size-cells": + const: 0 + +patternProperties: + "(compute-)?cb@[0-9]*$": + type: object + + description: > + Each subnode of the Fastrpc represents compute context banks available on the dsp. + + properties: + compatible: + const: qcom,fastrpc-compute-cb + + reg: + maxItems: 1 + + dma-coherent: true + + iommus: + minItems: 1 + maxItems: 3 + + qcom,nsessions: + $ref: /schemas/types.yaml#/definitions/uint32 + default: 1 + description: > + A value indicating how many sessions can share this context bank. + + required: + - compatible + - reg + + additionalProperties: false + +required: + - compatible + - label + - "#address-cells" + - "#size-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/mailbox/qcom-ipcc.h> + + glink-edge { + interrupts-extended = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_CLIENT_LPASS + IPCC_MPROC_SIGNAL_GLINK_QMP>; + label = "lpass"; + qcom,remote-pid = <2>; + + fastrpc { + compatible = "qcom,fastrpc"; + qcom,glink-channels = "fastrpcglink-apps-dsp"; + label = "sdsp"; + qcom,non-secure-domain; + #address-cells = <1>; + #size-cells = <0>; + + compute-cb@1 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <1>; + iommus = <&apps_smmu 0x0541 0x0>; + }; + + compute-cb@2 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <2>; + iommus = <&apps_smmu 0x0542 0x0>; + }; + + compute-cb@3 { + compatible = "qcom,fastrpc-compute-cb"; + reg = <3>; + iommus = <&apps_smmu 0x0543 0x0>; + }; + }; + }; diff --git a/dts/Bindings/misc/ti,j721e-esm.yaml b/dts/Bindings/misc/ti,j721e-esm.yaml new file mode 100644 index 0000000000..0c9a844484 --- /dev/null +++ b/dts/Bindings/misc/ti,j721e-esm.yaml @@ -0,0 +1,53 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +# Copyright (C) 2022 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/ti,j721e-esm.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments K3 ESM + +maintainers: + - Neha Malcom Francis <n-francis@ti.com> + +description: + The ESM (Error Signaling Module) is an IP block on TI K3 devices + that allows handling of safety events somewhat similar to what interrupt + controller would do. The safety signals have their separate paths within + the SoC, and they are handled by the ESM, which routes them to the proper + destination, which can be system reset, interrupt controller, etc. In the + simplest configuration the signals are just routed to reset the SoC. + +properties: + compatible: + const: ti,j721e-esm + + reg: + maxItems: 1 + + ti,esm-pins: + $ref: /schemas/types.yaml#/definitions/uint32-array + description: + integer array of ESM interrupt pins to route to external event pin + which can be used to reset the SoC. + minItems: 1 + maxItems: 255 + +required: + - compatible + - reg + - ti,esm-pins + +additionalProperties: false + +examples: + - | + bus { + #address-cells = <2>; + #size-cells = <2>; + esm@700000 { + compatible = "ti,j721e-esm"; + reg = <0x0 0x700000 0x0 0x1000>; + ti,esm-pins = <344>, <345>; + }; + }; diff --git a/dts/Bindings/misc/xlnx,sd-fec.txt b/dts/Bindings/misc/xlnx,sd-fec.txt deleted file mode 100644 index e3289634fa..0000000000 --- a/dts/Bindings/misc/xlnx,sd-fec.txt +++ /dev/null @@ -1,58 +0,0 @@ -* Xilinx SDFEC(16nm) IP * - -The Soft Decision Forward Error Correction (SDFEC) Engine is a Hard IP block -which provides high-throughput LDPC and Turbo Code implementations. -The LDPC decode & encode functionality is capable of covering a range of -customer specified Quasi-cyclic (QC) codes. The Turbo decode functionality -principally covers codes used by LTE. The FEC Engine offers significant -power and area savings versus implementations done in the FPGA fabric. - - -Required properties: -- compatible: Must be "xlnx,sd-fec-1.1" -- clock-names : List of input clock names from the following: - - "core_clk", Main processing clock for processing core (required) - - "s_axi_aclk", AXI4-Lite memory-mapped slave interface clock (required) - - "s_axis_din_aclk", DIN AXI4-Stream Slave interface clock (optional) - - "s_axis_din_words-aclk", DIN_WORDS AXI4-Stream Slave interface clock (optional) - - "s_axis_ctrl_aclk", Control input AXI4-Stream Slave interface clock (optional) - - "m_axis_dout_aclk", DOUT AXI4-Stream Master interface clock (optional) - - "m_axis_dout_words_aclk", DOUT_WORDS AXI4-Stream Master interface clock (optional) - - "m_axis_status_aclk", Status output AXI4-Stream Master interface clock (optional) -- clocks : Clock phandles (see clock_bindings.txt for details). -- reg: Should contain Xilinx SDFEC 16nm Hardened IP block registers - location and length. -- xlnx,sdfec-code : Should contain "ldpc" or "turbo" to describe the codes - being used. -- xlnx,sdfec-din-words : A value 0 indicates that the DIN_WORDS interface is - driven with a fixed value and is not present on the device, a value of 1 - configures the DIN_WORDS to be block based, while a value of 2 configures the - DIN_WORDS input to be supplied for each AXI transaction. -- xlnx,sdfec-din-width : Configures the DIN AXI stream where a value of 1 - configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width - of "4x128b". -- xlnx,sdfec-dout-words : A value 0 indicates that the DOUT_WORDS interface is - driven with a fixed value and is not present on the device, a value of 1 - configures the DOUT_WORDS to be block based, while a value of 2 configures the - DOUT_WORDS input to be supplied for each AXI transaction. -- xlnx,sdfec-dout-width : Configures the DOUT AXI stream where a value of 1 - configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width - of "4x128b". -Optional properties: -- interrupts: should contain SDFEC interrupt number - -Example ---------------------------------------- - sd_fec_0: sd-fec@a0040000 { - compatible = "xlnx,sd-fec-1.1"; - clock-names = "core_clk","s_axi_aclk","s_axis_ctrl_aclk","s_axis_din_aclk","m_axis_status_aclk","m_axis_dout_aclk"; - clocks = <&misc_clk_2>,<&misc_clk_0>,<&misc_clk_1>,<&misc_clk_1>,<&misc_clk_1>, <&misc_clk_1>; - reg = <0x0 0xa0040000 0x0 0x40000>; - interrupt-parent = <&axi_intc>; - interrupts = <1 0>; - xlnx,sdfec-code = "ldpc"; - xlnx,sdfec-din-words = <0>; - xlnx,sdfec-din-width = <2>; - xlnx,sdfec-dout-words = <0>; - xlnx,sdfec-dout-width = <1>; - }; diff --git a/dts/Bindings/misc/xlnx,sd-fec.yaml b/dts/Bindings/misc/xlnx,sd-fec.yaml new file mode 100644 index 0000000000..9bd2103374 --- /dev/null +++ b/dts/Bindings/misc/xlnx,sd-fec.yaml @@ -0,0 +1,140 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/xlnx,sd-fec.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx SDFEC(16nm) IP + +maintainers: + - Cvetic, Dragan <dragan.cvetic@amd.com> + - Erim, Salih <salih.erim@amd.com> + +description: + The Soft Decision Forward Error Correction (SDFEC) Engine is a Hard IP block + which provides high-throughput LDPC and Turbo Code implementations. + The LDPC decode & encode functionality is capable of covering a range of + customer specified Quasi-cyclic (QC) codes. The Turbo decode functionality + principally covers codes used by LTE. The FEC Engine offers significant + power and area savings versus implementations done in the FPGA fabric. + +properties: + compatible: + const: xlnx,sd-fec-1.1 + + reg: + maxItems: 1 + + clocks: + minItems: 2 + maxItems: 8 + additionalItems: true + items: + - description: Main processing clock for processing core + - description: AXI4-Lite memory-mapped slave interface clock + - description: Control input AXI4-Stream Slave interface clock + - description: DIN AXI4-Stream Slave interface clock + - description: Status output AXI4-Stream Master interface clock + - description: DOUT AXI4-Stream Master interface clock + - description: DIN_WORDS AXI4-Stream Slave interface clock + - description: DOUT_WORDS AXI4-Stream Master interface clock + + clock-names: + allOf: + - minItems: 2 + maxItems: 8 + additionalItems: true + items: + - const: core_clk + - const: s_axi_aclk + - items: + enum: + - core_clk + - s_axi_aclk + - s_axis_ctrl_aclk + - s_axis_din_aclk + - m_axis_status_aclk + - m_axis_dout_aclk + - s_axis_din_words_aclk + - m_axis_dout_words_aclk + + interrupts: + maxItems: 1 + + xlnx,sdfec-code: + description: + The SD-FEC integrated block supports Low Density Parity Check (LDPC) + decoding and encoding and Turbo code decoding. The LDPC codes used are + highly configurable, and the specific code used can be specified on + a codeword-by-codeword basis. The Turbo code decoding is required by LTE + standard. + $ref: /schemas/types.yaml#/definitions/string + items: + enum: [ ldpc, turbo ] + + xlnx,sdfec-din-width: + description: + Configures the DIN AXI stream where a value of 1 + configures a width of "1x128b", 2 a width of "2x128b" and 4 configures a width + of "4x128b". + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 1, 2, 4 ] + + xlnx,sdfec-din-words: + description: + A value 0 indicates that the DIN_WORDS interface is + driven with a fixed value and is not present on the device, a value of 1 + configures the DIN_WORDS to be block based, while a value of 2 configures the + DIN_WORDS input to be supplied for each AXI transaction. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2 ] + + xlnx,sdfec-dout-width: + description: + Configures the DOUT AXI stream where a value of 1 configures a width of "1x128b", + 2 a width of "2x128b" and 4 configures a width of "4x128b". + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 1, 2, 4 ] + + xlnx,sdfec-dout-words: + description: + A value 0 indicates that the DOUT_WORDS interface is + driven with a fixed value and is not present on the device, a value of 1 + configures the DOUT_WORDS to be block based, while a value of 2 configures the + DOUT_WORDS input to be supplied for each AXI transaction. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [ 0, 1, 2 ] + +required: + - compatible + - reg + - clocks + - clock-names + - xlnx,sdfec-code + - xlnx,sdfec-din-width + - xlnx,sdfec-din-words + - xlnx,sdfec-dout-width + - xlnx,sdfec-dout-words + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/irq.h> + + sd-fec@a0040000 { + compatible = "xlnx,sd-fec-1.1"; + reg = <0xa0040000 0x40000>; + clocks = <&misc_clk_2>, <&misc_clk_0>, <&misc_clk_1>, <&misc_clk_1>, + <&misc_clk_1>, <&misc_clk_1>; + clock-names = "core_clk", "s_axi_aclk", "s_axis_ctrl_aclk", + "s_axis_din_aclk", "m_axis_status_aclk", + "m_axis_dout_aclk"; + interrupts = <1 IRQ_TYPE_LEVEL_HIGH>; + xlnx,sdfec-code = "ldpc"; + xlnx,sdfec-din-width = <2>; + xlnx,sdfec-din-words = <0>; + xlnx,sdfec-dout-width = <1>; + xlnx,sdfec-dout-words = <0>; + }; + diff --git a/dts/Bindings/misc/xlnx,tmr-inject.yaml b/dts/Bindings/misc/xlnx,tmr-inject.yaml new file mode 100644 index 0000000000..1b6020e4ec --- /dev/null +++ b/dts/Bindings/misc/xlnx,tmr-inject.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/xlnx,tmr-inject.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx Triple Modular Redundancy(TMR) Inject IP + +maintainers: + - Appana Durga Kedareswara rao <appana.durga.kedareswara.rao@amd.com> + +description: | + The Triple Modular Redundancy(TMR) Inject core provides functional fault + injection by changing selected MicroBlaze instructions, which provides the + possibility to verify that the TMR subsystem error detection and fault + recovery logic is working properly. + +properties: + compatible: + enum: + - xlnx,tmr-inject-1.0 + + reg: + maxItems: 1 + + xlnx,magic: + minimum: 0 + maximum: 255 + description: | + Magic number, When configured it allows the controller to perform + recovery. + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - xlnx,magic + +additionalProperties: false + +examples: + - | + fault-inject@44a30000 { + compatible = "xlnx,tmr-inject-1.0"; + reg = <0x44a10000 0x10000>; + xlnx,magic = <0x46>; + }; diff --git a/dts/Bindings/misc/xlnx,tmr-manager.yaml b/dts/Bindings/misc/xlnx,tmr-manager.yaml new file mode 100644 index 0000000000..27de12147a --- /dev/null +++ b/dts/Bindings/misc/xlnx,tmr-manager.yaml @@ -0,0 +1,47 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/misc/xlnx,tmr-manager.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Xilinx Triple Modular Redundancy(TMR) Manager IP + +maintainers: + - Appana Durga Kedareswara rao <appana.durga.kedareswara.rao@amd.com> + +description: | + The Triple Modular Redundancy(TMR) Manager is responsible for handling the + TMR subsystem state, including fault detection and error recovery. The core + is triplicated in each of the sub-blocks in the TMR subsystem, and provides + majority voting of its internal state. + +properties: + compatible: + enum: + - xlnx,tmr-manager-1.0 + + reg: + maxItems: 1 + + xlnx,magic1: + minimum: 0 + maximum: 255 + description: + Magic byte 1, When configured it allows the controller to perform + recovery. + $ref: /schemas/types.yaml#/definitions/uint32 + +required: + - compatible + - reg + - xlnx,magic1 + +additionalProperties: false + +examples: + - | + tmr-manager@44a10000 { + compatible = "xlnx,tmr-manager-1.0"; + reg = <0x44a10000 0x10000>; + xlnx,magic1 = <0x46>; + }; |