1 files changed, 28 insertions, 4 deletions
diff --git a/dts/Bindings/mmc/arm,pl18x.yaml b/dts/Bindings/mmc/arm,pl18x.yaml
index 47595cb483..940b126881 100644
--- a/dts/Bindings/mmc/arm,pl18x.yaml
+++ b/dts/Bindings/mmc/arm,pl18x.yaml
@@ -53,6 +53,13 @@ properties:
         items:
           - const: arm,pl18x
           - const: arm,primecell
+      - description: Entries for STMicroelectronics variant of PL18x.
+        items:
+          - enum:
+              - st,stm32-sdmmc2
+              - st,stm32mp25-sdmmc2
+          - const: arm,pl18x
+          - const: arm,primecell
 
   clocks:
     description: One or two clocks, the "apb_pclk" and the "MCLK"
@@ -60,6 +67,18 @@ properties:
     minItems: 1
     maxItems: 2
 
+  dmas:
+    maxItems: 2
+
+  dma-names:
+    oneOf:
+      - items:
+          - const: tx
+          - const: rx
+      - items:
+          - const: rx
+          - const: tx
+
   power-domains: true
 
   resets:
@@ -77,7 +96,9 @@ properties:
       PIO (polled I/O) interrupt and occurs when the FIFO needs to be
       emptied as part of a bulk read from the card. Some variants have these
       two interrupts wired into the same line (logic OR) and in that case
-      only one interrupt may be provided.
+      only one interrupt may be provided. The interrupt-names property is
+      not used due to inconsistency of existing DTs regarding its content.
+    deprecated: false
     minItems: 1
     maxItems: 2
 
@@ -167,6 +188,9 @@ examples:
       clock-names = "mclk", "apb_pclk";
     };
 
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
     mmc@80126000 {
       compatible = "arm,pl18x", "arm,primecell";
       reg = <0x80126000 0x1000>;
@@ -179,7 +203,7 @@ examples:
       bus-width = <4>;
       cap-sd-highspeed;
       cap-mmc-highspeed;
-      cd-gpios  = <&gpio2 31 0x4>;
+      cd-gpios = <&gpio2 31 0x4>;
       st,sig-dir-dat0;
       st,sig-dir-dat2;
       st,sig-dir-cmd;
@@ -188,12 +212,12 @@ examples:
       vqmmc-supply = <&vmmci>;
     };
 
+  - |
     mmc@101f6000 {
       compatible = "arm,pl18x", "arm,primecell";
       reg = <0x101f6000 0x1000>;
       clocks = <&sdiclk>, <&pclksdi>;
       clock-names = "mclk", "apb_pclk";
-      interrupt-parent = <&vica>;
       interrupts = <22>;
       max-frequency = <400000>;
       bus-width = <4>;
@@ -208,12 +232,12 @@ examples:
       vmmc-supply = <&vmmc_regulator>;
     };
 
+  - |
     mmc@52007000 {
       compatible = "arm,pl18x", "arm,primecell";
       arm,primecell-periphid = <0x10153180>;
       reg = <0x52007000 0x1000>;
       interrupts = <49>;
-      interrupt-names = "cmd_irq";
       clocks = <&rcc 0>;
       clock-names = "apb_pclk";
       resets = <&rcc 1>;