diff options
Diffstat (limited to 'dts/Bindings/mmc/exynos-dw-mshc.txt')
-rw-r--r-- | dts/Bindings/mmc/exynos-dw-mshc.txt | 94 |
1 files changed, 0 insertions, 94 deletions
diff --git a/dts/Bindings/mmc/exynos-dw-mshc.txt b/dts/Bindings/mmc/exynos-dw-mshc.txt deleted file mode 100644 index 753e9d7d89..0000000000 --- a/dts/Bindings/mmc/exynos-dw-mshc.txt +++ /dev/null @@ -1,94 +0,0 @@ -* Samsung Exynos specific extensions to the Synopsys Designware Mobile - Storage Host Controller - -The Synopsys designware mobile storage host controller is used to interface -a SoC with storage medium such as eMMC or SD/MMC cards. This file documents -differences between the core Synopsys dw mshc controller properties described -by synopsys-dw-mshc.txt and the properties used by the Samsung Exynos specific -extensions to the Synopsys Designware Mobile Storage Host Controller. - -Required Properties: - -* compatible: should be - - "samsung,exynos4210-dw-mshc": for controllers with Samsung Exynos4210 - specific extensions. - - "samsung,exynos4412-dw-mshc": for controllers with Samsung Exynos4412 - specific extensions. - - "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250 - specific extensions. - - "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420 - specific extensions. - - "samsung,exynos7-dw-mshc": for controllers with Samsung Exynos7 - specific extensions. - - "samsung,exynos7-dw-mshc-smu": for controllers with Samsung Exynos7 - specific extensions having an SMU. - - "axis,artpec8-dw-mshc": for controllers with ARTPEC-8 specific - extensions. - -* samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface - unit (ciu) clock. This property is applicable only for Exynos5 SoC's and - ignored for Exynos4 SoC's. The valid range of divider value is 0 to 7. - -* samsung,dw-mshc-sdr-timing: Specifies the value of CIU clock phase shift value - in transmit mode and CIU clock phase shift value in receive mode for single - data rate mode operation. Refer notes below for the order of the cells and the - valid values. - -* samsung,dw-mshc-ddr-timing: Specifies the value of CUI clock phase shift value - in transmit mode and CIU clock phase shift value in receive mode for double - data rate mode operation. Refer notes below for the order of the cells and the - valid values. -* samsung,dw-mshc-hs400-timing: Specifies the value of CIU TX and RX clock phase - shift value for hs400 mode operation. - - Notes for the sdr-timing and ddr-timing values: - - The order of the cells should be - - First Cell: CIU clock phase shift value for tx mode. - - Second Cell: CIU clock phase shift value for rx mode. - - Valid values for SDR and DDR CIU clock timing for Exynos5250: - - valid value for tx phase shift and rx phase shift is 0 to 7. - - when CIU clock divider value is set to 3, all possible 8 phase shift - values can be used. - - if CIU clock divider value is 0 (that is divide by 1), both tx and rx - phase shift clocks should be 0. - -* samsung,read-strobe-delay: RCLK (Data strobe) delay to control HS400 mode - (Latency value for delay line in Read path) - -Required properties for a slot (Deprecated - Recommend to use one slot per host): - -* gpios: specifies a list of gpios used for command, clock and data bus. The - first gpio is the command line and the second gpio is the clock line. The - rest of the gpios (depending on the bus-width property) are the data lines in - no particular order. The format of the gpio specifier depends on the gpio - controller. -(Deprecated - Refer to Documentation/devicetree/bindings/pinctrl/samsung-pinctrl.txt) - -Example: - - The MSHC controller node can be split into two portions, SoC specific and - board specific portions as listed below. - - dwmmc0@12200000 { - compatible = "samsung,exynos5250-dw-mshc"; - reg = <0x12200000 0x1000>; - interrupts = <0 75 0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - dwmmc0@12200000 { - cap-mmc-highspeed; - cap-sd-highspeed; - broken-cd; - fifo-depth = <0x80>; - card-detect-delay = <200>; - samsung,dw-mshc-ciu-div = <3>; - samsung,dw-mshc-sdr-timing = <2 3>; - samsung,dw-mshc-ddr-timing = <1 2>; - samsung,dw-mshc-hs400-timing = <0 2>; - samsung,read-strobe-delay = <90>; - bus-width = <8>; - }; |