diff options
Diffstat (limited to 'dts/Bindings/mmc/mmc-controller.yaml')
-rw-r--r-- | dts/Bindings/mmc/mmc-controller.yaml | 23 |
1 files changed, 16 insertions, 7 deletions
diff --git a/dts/Bindings/mmc/mmc-controller.yaml b/dts/Bindings/mmc/mmc-controller.yaml index 513f3c8758..58ae298cd2 100644 --- a/dts/Bindings/mmc/mmc-controller.yaml +++ b/dts/Bindings/mmc/mmc-controller.yaml @@ -4,7 +4,7 @@ $id: http://devicetree.org/schemas/mmc/mmc-controller.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: MMC Controller Generic Binding +title: MMC Controller Common Properties maintainers: - Ulf Hansson <ulf.hansson@linaro.org> @@ -88,11 +88,18 @@ properties: default: 1 max-frequency: - description: - Maximum operating frequency of the bus. + description: | + Maximum operating frequency of the bus: + - for eMMC, the maximum supported frequency is 200MHz, + - for SD/SDIO cards the SDR104 mode has a max supported + frequency of 208MHz, + - some mmc host controllers do support a max frequency upto + 384MHz. + So, lets keep the maximum supported value here. + $ref: /schemas/types.yaml#/definitions/uint32 minimum: 400000 - maximum: 200000000 + maximum: 384000000 disable-wp: $ref: /schemas/types.yaml#/definitions/flag @@ -262,7 +269,7 @@ properties: post-power-on-delay-ms: description: It was invented for MMC pwrseq-simple which could be referred to - mmc-pwrseq-simple.txt. But now it\'s reused as a tunable delay + mmc-pwrseq-simple.yaml. But now it\'s reused as a tunable delay waiting for I/O signalling and card power supply to be stable, regardless of whether pwrseq-simple is used. Default to 10ms if no available. @@ -286,7 +293,6 @@ properties: description: SDIO only. Preserves card power during a suspend/resume cycle. - # Deprecated: enable-sdio-wakeup wakeup-source: $ref: /schemas/types.yaml#/definitions/flag description: @@ -298,7 +304,10 @@ properties: vqmmc-supply: description: - Supply for the bus IO line power + Supply for the bus IO line power, such as a level shifter. + If the level shifter is controlled by a GPIO line, this shall + be modeled as a "regulator-fixed" with a GPIO line for + switching the level shifter on/off. mmc-pwrseq: $ref: /schemas/types.yaml#/definitions/phandle |