diff options
Diffstat (limited to 'dts/Bindings/mmc/mmc.txt')
| -rw-r--r-- | dts/Bindings/mmc/mmc.txt | 6 |
1 files changed, 6 insertions, 0 deletions
diff --git a/dts/Bindings/mmc/mmc.txt b/dts/Bindings/mmc/mmc.txt index 467cd7b147..f5a0923b34 100644 --- a/dts/Bindings/mmc/mmc.txt +++ b/dts/Bindings/mmc/mmc.txt @@ -19,6 +19,8 @@ Optional properties: - wp-gpios: Specify GPIOs for write protection, see gpio binding - cd-inverted: when present, polarity on the CD line is inverted. See the note below for the case, when a GPIO is used for the CD line +- cd-debounce-delay-ms: Set delay time before detecting card after card insert interrupt. + It's only valid when cd-gpios is present. - wp-inverted: when present, polarity on the WP line is inverted. See the note below for the case, when a GPIO is used for the WP line - disable-wp: When set no physical WP line is present. This property should @@ -56,6 +58,10 @@ Optional properties: - fixed-emmc-driver-type: for non-removable eMMC, enforce this driver type. The value <n> is the driver type as specified in the eMMC specification (table 206 in spec version 5.1). +- post-power-on-delay-ms : It was invented for MMC pwrseq-simple which could + be referred to mmc-pwrseq-simple.txt. But now it's reused as a tunable delay + waiting for I/O signalling and card power supply to be stable, regardless of + whether pwrseq-simple is used. Default to 10ms if no available. *NOTE* on CD and WP polarity. To use common for all SD/MMC host controllers line polarity properties, we have to fix the meaning of the "normal" and "inverted" |