summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/mmc/mtk-sd.txt
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/mmc/mtk-sd.txt')
-rw-r--r--dts/Bindings/mmc/mtk-sd.txt75
1 files changed, 0 insertions, 75 deletions
diff --git a/dts/Bindings/mmc/mtk-sd.txt b/dts/Bindings/mmc/mtk-sd.txt
deleted file mode 100644
index 26a8f320a1..0000000000
--- a/dts/Bindings/mmc/mtk-sd.txt
+++ /dev/null
@@ -1,75 +0,0 @@
-* MTK MMC controller
-
-The MTK MSDC can act as a MMC controller
-to support MMC, SD, and SDIO types of memory cards.
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the msdc driver.
-
-Required properties:
-- compatible: value should be either of the following.
- "mediatek,mt8135-mmc": for mmc host ip compatible with mt8135
- "mediatek,mt8173-mmc": for mmc host ip compatible with mt8173
- "mediatek,mt8183-mmc": for mmc host ip compatible with mt8183
- "mediatek,mt8516-mmc": for mmc host ip compatible with mt8516
- "mediatek,mt6779-mmc": for mmc host ip compatible with mt6779
- "mediatek,mt2701-mmc": for mmc host ip compatible with mt2701
- "mediatek,mt2712-mmc": for mmc host ip compatible with mt2712
- "mediatek,mt7622-mmc": for MT7622 SoC
- "mediatek,mt7623-mmc", "mediatek,mt2701-mmc": for MT7623 SoC
- "mediatek,mt7620-mmc", for MT7621 SoC (and others)
-
-- reg: physical base address of the controller and length
-- interrupts: Should contain MSDC interrupt number
-- clocks: Should contain phandle for the clock feeding the MMC controller
-- clock-names: Should contain the following:
- "source" - source clock (required)
- "hclk" - HCLK which used for host (required)
- "source_cg" - independent source clock gate (required for MT2712)
- "bus_clk" - bus clock used for internal register access (required for MT2712 MSDC0/3)
-- pinctrl-names: should be "default", "state_uhs"
-- pinctrl-0: should contain default/high speed pin ctrl
-- pinctrl-1: should contain uhs mode pin ctrl
-- vmmc-supply: power to the Core
-- vqmmc-supply: power to the IO
-
-Optional properties:
-- assigned-clocks: PLL of the source clock
-- assigned-clock-parents: parent of source clock, used for HS400 mode to get 400Mhz source clock
-- hs400-ds-delay: HS400 DS delay setting
-- mediatek,hs200-cmd-int-delay: HS200 command internal delay setting.
- This field has total 32 stages.
- The value is an integer from 0 to 31.
-- mediatek,hs400-cmd-int-delay: HS400 command internal delay setting
- This field has total 32 stages.
- The value is an integer from 0 to 31.
-- mediatek,hs400-cmd-resp-sel-rising: HS400 command response sample selection
- If present,HS400 command responses are sampled on rising edges.
- If not present,HS400 command responses are sampled on falling edges.
-- mediatek,latch-ck: Some SoCs do not support enhance_rx, need set correct latch-ck to avoid data crc
- error caused by stop clock(fifo full)
- Valid range = [0:0x7]. if not present, default value is 0.
- applied to compatible "mediatek,mt2701-mmc".
-- resets: Phandle and reset specifier pair to softreset line of MSDC IP.
-- reset-names: Should be "hrst".
-
-Examples:
-mmc0: mmc@11230000 {
- compatible = "mediatek,mt8173-mmc", "mediatek,mt8135-mmc";
- reg = <0 0x11230000 0 0x108>;
- interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_LOW>;
- vmmc-supply = <&mt6397_vemc_3v3_reg>;
- vqmmc-supply = <&mt6397_vio18_reg>;
- clocks = <&pericfg CLK_PERI_MSDC30_0>,
- <&topckgen CLK_TOP_MSDC50_0_H_SEL>;
- clock-names = "source", "hclk";
- pinctrl-names = "default", "state_uhs";
- pinctrl-0 = <&mmc0_pins_default>;
- pinctrl-1 = <&mmc0_pins_uhs>;
- assigned-clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>;
- assigned-clock-parents = <&topckgen CLK_TOP_MSDCPLL_D2>;
- hs400-ds-delay = <0x14015>;
- mediatek,hs200-cmd-int-delay = <26>;
- mediatek,hs400-cmd-int-delay = <14>;
- mediatek,hs400-cmd-resp-sel-rising;
-};