1 files changed, 0 insertions, 77 deletions
diff --git a/dts/Bindings/mmc/sdhci-msm.txt b/dts/Bindings/mmc/sdhci-msm.txt
deleted file mode 100644
index 7ee639b1af..0000000000
--- a/dts/Bindings/mmc/sdhci-msm.txt
+++ /dev/null
@@ -1,77 +0,0 @@
-* Qualcomm SDHCI controller (sdhci-msm)
-
-This file documents differences between the core properties in mmc.txt
-and the properties used by the sdhci-msm driver.
-
-Required properties:
-- compatible: Should contain a SoC-specific string and a IP version string:
-	version strings:
-		"qcom,sdhci-msm-v4" for sdcc versions less than 5.0
-		"qcom,sdhci-msm-v5" for sdcc version 5.0
-		For SDCC version 5.0.0, MCI registers are removed from SDCC
-		interface and some registers are moved to HC. New compatible
-		string is added to support this change - "qcom,sdhci-msm-v5".
-	full compatible strings with SoC and version:
-		"qcom,apq8084-sdhci", "qcom,sdhci-msm-v4"
-		"qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"
-		"qcom,msm8916-sdhci", "qcom,sdhci-msm-v4"
-		"qcom,msm8992-sdhci", "qcom,sdhci-msm-v4"
-		"qcom,msm8996-sdhci", "qcom,sdhci-msm-v4"
-		"qcom,sdm845-sdhci", "qcom,sdhci-msm-v5"
-		"qcom,qcs404-sdhci", "qcom,sdhci-msm-v5"
-		"qcom,sc7180-sdhci", "qcom,sdhci-msm-v5";
-	NOTE that some old device tree files may be floating around that only
-	have the string "qcom,sdhci-msm-v4" without the SoC compatible string
-	but doing that should be considered a deprecated practice.
-
-- reg: Base address and length of the register in the following order:
-	- Host controller register map (required)
-	- SD Core register map (required for msm-v4 and below)
-- interrupts: Should contain an interrupt-specifiers for the interrupts:
-	- Host controller interrupt (required)
-- pinctrl-names: Should contain only one value - "default".
-- pinctrl-0: Should specify pin control groups used for this controller.
-- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock-names.
-- clock-names: Should contain the following:
-	"iface" - Main peripheral bus clock (PCLK/HCLK - AHB Bus clock) (required)
-	"core"	- SDC MMC clock (MCLK) (required)
-	"bus"	- SDCC bus voter clock (optional)
-	"xo"	- TCXO clock (optional)
-	"cal"	- reference clock for RCLK delay calibration (optional)
-	"sleep"	- sleep clock for RCLK delay calibration (optional)
-
-Example:
-
-	sdhc_1: sdhci@f9824900 {
-		compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
-		reg = <0xf9824900 0x11c>, <0xf9824000 0x800>;
-		interrupts = <0 123 0>;
-		bus-width = <8>;
-		non-removable;
-
-		vmmc-supply = <&pm8941_l20>;
-		vqmmc-supply = <&pm8941_s3>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdc1_clk &sdc1_cmd &sdc1_data>;
-
-		clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>;
-		clock-names = "core", "iface";
-	};
-
-	sdhc_2: sdhci@f98a4900 {
-		compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4";
-		reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
-		interrupts = <0 125 0>;
-		bus-width = <4>;
-		cd-gpios = <&msmgpio 62 0x1>;
-
-		vmmc-supply = <&pm8941_l21>;
-		vqmmc-supply = <&pm8941_l13>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data>;
-
-		clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>;
-		clock-names = "core", "iface";
-	};