summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/mmc/synopsys-dw-mshc-common.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/mmc/synopsys-dw-mshc-common.yaml')
-rw-r--r--dts/Bindings/mmc/synopsys-dw-mshc-common.yaml68
1 files changed, 68 insertions, 0 deletions
diff --git a/dts/Bindings/mmc/synopsys-dw-mshc-common.yaml b/dts/Bindings/mmc/synopsys-dw-mshc-common.yaml
new file mode 100644
index 0000000000..890d47a87a
--- /dev/null
+++ b/dts/Bindings/mmc/synopsys-dw-mshc-common.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/synopsys-dw-mshc-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys Designware Mobile Storage Host Controller Common Properties
+
+allOf:
+ - $ref: "mmc-controller.yaml#"
+
+maintainers:
+ - Ulf Hansson <ulf.hansson@linaro.org>
+
+# Everything else is described in the common file
+properties:
+ resets:
+ maxItems: 1
+
+ reset-names:
+ const: reset
+
+ clock-frequency:
+ description:
+ Should be the frequency (in Hz) of the ciu clock. If this
+ is specified and the ciu clock is specified then we'll try to set the ciu
+ clock to this at probe time.
+
+ fifo-depth:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ The maximum size of the tx/rx fifo's. If this property is not
+ specified, the default value of the fifo size is determined from the
+ controller registers.
+
+ card-detect-delay:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ - default: 0
+ description:
+ Delay in milli-seconds before detecting card after card
+ insert event. The default value is 0.
+
+ data-addr:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/uint32
+ description:
+ Override fifo address with value provided by DT. The default FIFO reg
+ offset is assumed as 0x100 (version < 0x240A) and 0x200(version >= 0x240A)
+ by driver. If the controller does not follow this rule, please use
+ this property to set fifo address in device tree.
+
+ fifo-watermark-aligned:
+ allOf:
+ - $ref: /schemas/types.yaml#/definitions/flag
+ description:
+ Data done irq is expected if data length is less than
+ watermark in PIO mode. But fifo watermark is requested to be aligned
+ with data length in some SoC so that TX/RX irq can be generated with
+ data done irq. Add this watermark quirk to mark this requirement and
+ force fifo watermark setting accordingly.
+
+ dmas:
+ maxItems: 1
+
+ dma-names:
+ const: rx-tx