1 files changed, 0 insertions, 55 deletions
diff --git a/dts/Bindings/mmc/uniphier-sd.txt b/dts/Bindings/mmc/uniphier-sd.txt
deleted file mode 100644
index e1d6587557..0000000000
--- a/dts/Bindings/mmc/uniphier-sd.txt
+++ /dev/null
@@ -1,55 +0,0 @@
-UniPhier SD/eMMC controller
-
-Required properties:
-- compatible: should be one of the following:
-    "socionext,uniphier-sd-v2.91"  - IP version 2.91
-    "socionext,uniphier-sd-v3.1"   - IP version 3.1
-    "socionext,uniphier-sd-v3.1.1" - IP version 3.1.1
-- reg: offset and length of the register set for the device.
-- interrupts: a single interrupt specifier.
-- clocks: a single clock specifier of the controller clock.
-- reset-names: should contain the following:
-    "host"   - mandatory for all versions
-    "bridge" - should exist only for "socionext,uniphier-sd-v2.91"
-    "hw"     - should exist if eMMC hw reset line is available
-- resets: a list of reset specifiers, corresponding to the reset-names
-
-Optional properties:
-- pinctrl-names: if present, should contain the following:
-    "default" - should exist for all instances
-    "uhs"     - should exist for SD instance with UHS support
-- pinctrl-0: pin control state for the default mode
-- pinctrl-1: pin control state for the UHS mode
-- dma-names: should be "rx-tx" if present.
-  This property can exist only for "socionext,uniphier-sd-v2.91".
-- dmas: a single DMA channel specifier
-  This property can exist only for "socionext,uniphier-sd-v2.91".
-- bus-width: see mmc.txt
-- cap-sd-highspeed: see mmc.txt
-- cap-mmc-highspeed: see mmc.txt
-- sd-uhs-sdr12: see mmc.txt
-- sd-uhs-sdr25: see mmc.txt
-- sd-uhs-sdr50: see mmc.txt
-- cap-mmc-hw-reset: should exist if reset-names contains "hw". see mmc.txt
-- non-removable: see mmc.txt
-
-Example:
-
-	sd: sdhc@5a400000 {
-		compatible = "socionext,uniphier-sd-v2.91";
-		reg = <0x5a400000 0x200>;
-		interrupts = <0 76 4>;
-		pinctrl-names = "default", "uhs";
-		pinctrl-0 = <&pinctrl_sd>;
-		pinctrl-1 = <&pinctrl_sd_uhs>;
-		clocks = <&mio_clk 0>;
-		reset-names = "host", "bridge";
-		resets = <&mio_rst 0>, <&mio_rst 3>;
-		dma-names = "rx-tx";
-		dmas = <&dmac 4>;
-		bus-width = <4>;
-		cap-sd-highspeed;
-		sd-uhs-sdr12;
-		sd-uhs-sdr25;
-		sd-uhs-sdr50;
-	};