diff options
Diffstat (limited to 'dts/Bindings/mmc')
| -rw-r--r-- | dts/Bindings/mmc/microchip,sdhci-pic32.txt | 2 | ||||
| -rw-r--r-- | dts/Bindings/mmc/mmc-pwrseq-emmc.txt | 2 | ||||
| -rw-r--r-- | dts/Bindings/mmc/rockchip-dw-mshc.txt | 1 | ||||
| -rw-r--r-- | dts/Bindings/mmc/sdhci-st.txt | 4 | ||||
| -rw-r--r-- | dts/Bindings/mmc/tmio_mmc.txt | 3 | ||||
| -rw-r--r-- | dts/Bindings/mmc/usdhi6rol0.txt | 6 |
6 files changed, 14 insertions, 4 deletions
diff --git a/dts/Bindings/mmc/microchip,sdhci-pic32.txt b/dts/Bindings/mmc/microchip,sdhci-pic32.txt index 71ad57e050..3149297b39 100644 --- a/dts/Bindings/mmc/microchip,sdhci-pic32.txt +++ b/dts/Bindings/mmc/microchip,sdhci-pic32.txt @@ -20,7 +20,7 @@ Example: compatible = "microchip,pic32mzda-sdhci"; reg = <0x1f8ec000 0x100>; interrupts = <191 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&REFCLKO4>, <&PBCLK5>; + clocks = <&rootclk REF4CLK>, <&rootclk PB5CLK>; clock-names = "base_clk", "sys_clk"; bus-width = <4>; cap-sd-highspeed; diff --git a/dts/Bindings/mmc/mmc-pwrseq-emmc.txt b/dts/Bindings/mmc/mmc-pwrseq-emmc.txt index 0cb827bf94..3d965d57e0 100644 --- a/dts/Bindings/mmc/mmc-pwrseq-emmc.txt +++ b/dts/Bindings/mmc/mmc-pwrseq-emmc.txt @@ -1,7 +1,7 @@ * The simple eMMC hardware reset provider The purpose of this driver is to perform standard eMMC hw reset -procedure, as descibed by Jedec 4.4 specification. This procedure is +procedure, as described by Jedec 4.4 specification. This procedure is performed just after MMC core enabled power to the given mmc host (to fix possible issues if bootloader has left eMMC card in initialized or unknown state), and before performing complete system reboot (also in diff --git a/dts/Bindings/mmc/rockchip-dw-mshc.txt b/dts/Bindings/mmc/rockchip-dw-mshc.txt index ea5614b6f6..07184e8f89 100644 --- a/dts/Bindings/mmc/rockchip-dw-mshc.txt +++ b/dts/Bindings/mmc/rockchip-dw-mshc.txt @@ -15,6 +15,7 @@ Required Properties: - "rockchip,rk3288-dw-mshc": for Rockchip RK3288 - "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3036 - "rockchip,rk3368-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3368 + - "rockchip,rk3399-dw-mshc", "rockchip,rk3288-dw-mshc": for Rockchip RK3399 Optional Properties: * clocks: from common clock binding: if ciu_drive and ciu_sample are diff --git a/dts/Bindings/mmc/sdhci-st.txt b/dts/Bindings/mmc/sdhci-st.txt index 18d950df27..88faa91125 100644 --- a/dts/Bindings/mmc/sdhci-st.txt +++ b/dts/Bindings/mmc/sdhci-st.txt @@ -38,7 +38,7 @@ Optional properties: - bus-width: Number of data lines. See: Documentation/devicetree/bindings/mmc/mmc.txt. -- max-frequency: Can be 200MHz, 100Mz or 50MHz (default) and used for +- max-frequency: Can be 200MHz, 100Mz or 50MHz (default) and used for configuring the CCONFIG3 in the mmcss. See: Documentation/devicetree/bindings/mmc/mmc.txt. @@ -48,7 +48,7 @@ Optional properties: - vqmmc-supply: Phandle to the regulator dt node, mentioned as the vcc/vdd supply in eMMC/SD specs. -- sd-uhs--sdr50: To enable the SDR50 in the mmcss. +- sd-uhs-sdr50: To enable the SDR50 in the mmcss. See: Documentation/devicetree/bindings/mmc/mmc.txt. - sd-uhs-sdr104: To enable the SDR104 in the mmcss. diff --git a/dts/Bindings/mmc/tmio_mmc.txt b/dts/Bindings/mmc/tmio_mmc.txt index 7fb746dd1a..0f610d4b5b 100644 --- a/dts/Bindings/mmc/tmio_mmc.txt +++ b/dts/Bindings/mmc/tmio_mmc.txt @@ -26,3 +26,6 @@ Required properties: Optional properties: - toshiba,mmc-wrprotect-disable: write-protect detection is unavailable +- pinctrl-names: should be "default", "state_uhs" +- pinctrl-0: should contain default/high speed pin ctrl +- pinctrl-1: should contain uhs mode pin ctrl diff --git a/dts/Bindings/mmc/usdhi6rol0.txt b/dts/Bindings/mmc/usdhi6rol0.txt index 8babdaa862..6d1b7971d0 100644 --- a/dts/Bindings/mmc/usdhi6rol0.txt +++ b/dts/Bindings/mmc/usdhi6rol0.txt @@ -12,6 +12,12 @@ Optional properties: - vmmc-supply: a phandle of a regulator, supplying Vcc to the card - vqmmc-supply: a phandle of a regulator, supplying VccQ to the card +- pinctrl-names: Can contain a "default" entry and a "state_uhs" + entry. The state_uhs entry is used together with the default + entry when the board requires distinct settings for UHS speeds. + +- pinctrl-N: One property for each name listed in pinctrl-names, see + ../pinctrl/pinctrl-bindings.txt. Additionally any standard mmc bindings from mmc.txt can be used. |