summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/mtd/nand-chip.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/mtd/nand-chip.yaml')
-rw-r--r--dts/Bindings/mtd/nand-chip.yaml74
1 files changed, 74 insertions, 0 deletions
diff --git a/dts/Bindings/mtd/nand-chip.yaml b/dts/Bindings/mtd/nand-chip.yaml
new file mode 100644
index 0000000000..609d4a4ddd
--- /dev/null
+++ b/dts/Bindings/mtd/nand-chip.yaml
@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/nand-chip.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NAND Chip Common Properties
+
+maintainers:
+ - Miquel Raynal <miquel.raynal@bootlin.com>
+
+allOf:
+ - $ref: mtd.yaml#
+
+description: |
+ This file covers the generic description of a NAND chip. It implies that the
+ bus interface should not be taken into account: both raw NAND devices and
+ SPI-NAND devices are concerned by this description.
+
+properties:
+ reg:
+ description:
+ Contains the chip-select IDs.
+
+ nand-ecc-engine:
+ description: |
+ A phandle on the hardware ECC engine if any. There are
+ basically three possibilities:
+ 1/ The ECC engine is part of the NAND controller, in this
+ case the phandle should reference the parent node.
+ 2/ The ECC engine is part of the NAND part (on-die), in this
+ case the phandle should reference the node itself.
+ 3/ The ECC engine is external, in this case the phandle should
+ reference the specific ECC engine node.
+ $ref: /schemas/types.yaml#/definitions/phandle
+
+ nand-use-soft-ecc-engine:
+ description: Use a software ECC engine.
+ type: boolean
+
+ nand-no-ecc-engine:
+ description: Do not use any ECC correction.
+ type: boolean
+
+ nand-ecc-algo:
+ description:
+ Desired ECC algorithm.
+ $ref: /schemas/types.yaml#/definitions/string
+ enum: [hamming, bch, rs]
+
+ nand-ecc-strength:
+ description:
+ Maximum number of bits that can be corrected per ECC step.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+
+ nand-ecc-step-size:
+ description:
+ Number of data bytes covered by a single ECC step.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 1
+
+ secure-regions:
+ description:
+ Regions in the NAND chip which are protected using a secure element
+ like Trustzone. This property contains the start address and size of
+ the secure regions present.
+ $ref: /schemas/types.yaml#/definitions/uint64-matrix
+
+required:
+ - reg
+
+# This file can be referenced by more specific devices (like spi-nands)
+additionalProperties: true