summaryrefslogtreecommitdiffstats
path: root/dts/Bindings/mtd/nand.txt
diff options
context:
space:
mode:
Diffstat (limited to 'dts/Bindings/mtd/nand.txt')
-rw-r--r--dts/Bindings/mtd/nand.txt46
1 files changed, 43 insertions, 3 deletions
diff --git a/dts/Bindings/mtd/nand.txt b/dts/Bindings/mtd/nand.txt
index b53f92e252..3733300de8 100644
--- a/dts/Bindings/mtd/nand.txt
+++ b/dts/Bindings/mtd/nand.txt
@@ -1,8 +1,31 @@
-* MTD generic binding
+* NAND chip and NAND controller generic binding
+
+NAND controller/NAND chip representation:
+
+The NAND controller should be represented with its own DT node, and all
+NAND chips attached to this controller should be defined as children nodes
+of the NAND controller. This representation should be enforced even for
+simple controllers supporting only one chip.
+
+Mandatory NAND controller properties:
+- #address-cells: depends on your controller. Should at least be 1 to
+ encode the CS line id.
+- #size-cells: depends on your controller. Put zero unless you need a
+ mapping between CS lines and dedicated memory regions
+
+Optional NAND controller properties
+- ranges: only needed if you need to define a mapping between CS lines and
+ memory regions
+
+Optional NAND chip properties:
- nand-ecc-mode : String, operation mode of the NAND ecc mode.
- Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first",
- "soft_bch".
+ Supported values are: "none", "soft", "hw", "hw_syndrome",
+ "hw_oob_first".
+ Deprecated values:
+ "soft_bch": use "soft" and nand-ecc-algo instead
+- nand-ecc-algo: string, algorithm of NAND ECC.
+ Supported values are: "hamming", "bch".
- nand-bus-width : 8 or 16 bus width if not present 8
- nand-on-flash-bbt: boolean to enable on flash bbt option if not present false
@@ -19,3 +42,20 @@ errors per {size} bytes".
The interpretation of these parameters is implementation-defined, so not all
implementations must support all possible combinations. However, implementations
are encouraged to further specify the value(s) they support.
+
+Example:
+
+ nand-controller {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* controller specific properties */
+
+ nand@0 {
+ reg = <0>;
+ nand-ecc-mode = "soft";
+ nand-ecc-algo = "bch";
+
+ /* controller specific properties */
+ };
+ };